/* Plot oval pad.
*/
void HPGL_PLOTTER::FlashPadOval( const wxPoint& pos, const wxSize& aSize, double orient,
EDA_DRAW_MODE_T trace_mode )
{
wxASSERT( outputFile );
int deltaxy, cx, cy;
wxSize size( aSize );
/* The pad will be drawn as an oblong shape with size.y > size.x
* (Oval vertical orientation 0)
*/
if( size.x > size.y )
{
std::swap( size.x, size.y );
orient = AddAngles( orient, 900 );
}
deltaxy = size.y - size.x; // distance between centers of the oval
if( trace_mode == FILLED )
{
FlashPadRect( pos, wxSize( size.x, deltaxy + KiROUND( penDiameter ) ),
orient, trace_mode );
cx = 0; cy = deltaxy / 2;
RotatePoint( &cx, &cy, orient );
FlashPadCircle( wxPoint( cx + pos.x, cy + pos.y ), size.x, trace_mode );
cx = 0; cy = -deltaxy / 2;
RotatePoint( &cx, &cy, orient );
FlashPadCircle( wxPoint( cx + pos.x, cy + pos.y ), size.x, trace_mode );
}
else // Plot in outline mode.
{
sketchOval( pos, size, orient, KiROUND( penDiameter ) );
}
}
void PSLIKE_PLOTTER::FlashPadOval( const wxPoint& pos, const wxSize& aSize, double orient,
EDA_DRAW_MODE_T modetrace )
{
wxASSERT( outputFile );
int x0, y0, x1, y1, delta;
wxSize size( aSize );
// The pad is reduced to an oval by dy > dx
if( size.x > size.y )
{
EXCHG( size.x, size.y );
orient = AddAngles( orient, 900 );
}
delta = size.y - size.x;
x0 = 0;
y0 = -delta / 2;
x1 = 0;
y1 = delta / 2;
RotatePoint( &x0, &y0, orient );
RotatePoint( &x1, &y1, orient );
if( modetrace == FILLED )
ThickSegment( wxPoint( pos.x + x0, pos.y + y0 ),
wxPoint( pos.x + x1, pos.y + y1 ), size.x, modetrace );
else
sketchOval( pos, size, orient, -1 );
}
void PSLIKE_PLOTTER::FlashPadOval( const wxPoint& aPadPos, const wxSize& aSize,
double aPadOrient, EDA_DRAW_MODE_T aTraceMode, void* aData )
{
wxASSERT( outputFile );
int x0, y0, x1, y1, delta;
wxSize size( aSize );
// The pad is reduced to an oval by dy > dx
if( size.x > size.y )
{
std::swap( size.x, size.y );
aPadOrient = AddAngles( aPadOrient, 900 );
}
delta = size.y - size.x;
x0 = 0;
y0 = -delta / 2;
x1 = 0;
y1 = delta / 2;
RotatePoint( &x0, &y0, aPadOrient );
RotatePoint( &x1, &y1, aPadOrient );
if( aTraceMode == FILLED )
ThickSegment( wxPoint( aPadPos.x + x0, aPadPos.y + y0 ),
wxPoint( aPadPos.x + x1, aPadPos.y + y1 ), size.x, aTraceMode, NULL );
else
sketchOval( aPadPos, size, aPadOrient, -1 );
}
void GERBER_PLOTTER::FlashPadOval( const wxPoint& pos, const wxSize& aSize, double orient,
EDA_DRAW_MODE_T trace_mode )
{
wxASSERT( outputFile );
int x0, y0, x1, y1, delta;
wxSize size( aSize );
/* Plot a flashed shape. */
if( ( orient == 0 || orient == 900 || orient == 1800 || orient == 2700 )
&& trace_mode == FILLED )
{
if( orient == 900 || orient == 2700 ) /* orientation turned 90 deg. */
EXCHG( size.x, size.y );
DPOINT pos_dev = userToDeviceCoordinates( pos );
selectAperture( size, APERTURE::Oval );
emitDcode( pos_dev, 3 );
}
else /* Plot pad as a segment. */
{
if( size.x > size.y )
{
EXCHG( size.x, size.y );
if( orient < 2700 )
orient += 900;
else
orient -= 2700;
}
if( trace_mode == FILLED )
{
/* XXX to do: use an aperture macro to declare the rotated pad */
/* The pad is reduced to an oval with dy > dx */
delta = size.y - size.x;
x0 = 0;
y0 = -delta / 2;
x1 = 0;
y1 = delta / 2;
RotatePoint( &x0, &y0, orient );
RotatePoint( &x1, &y1, orient );
ThickSegment( wxPoint( pos.x + x0, pos.y + y0 ),
wxPoint( pos.x + x1, pos.y + y1 ),
size.x, trace_mode );
}
else
{
sketchOval( pos, size, orient, -1 );
}
}
}
/**
* DXF oval pad: always done in sketch mode
*/
void DXF_PLOTTER::FlashPadOval( const wxPoint& pos, const wxSize& aSize, double orient,
EDA_DRAW_MODE_T trace_mode )
{
wxASSERT( outputFile );
wxSize size( aSize );
/* The chip is reduced to an oval tablet with size.y > size.x
* (Oval vertical orientation 0) */
if( size.x > size.y )
{
std::swap( size.x, size.y );
orient = AddAngles( orient, 900 );
}
sketchOval( pos, size, orient, -1 );
}
void GERBER_PLOTTER::FlashPadOval( const wxPoint& pos, const wxSize& aSize, double orient,
EDA_DRAW_MODE_T trace_mode, void* aData )
{
wxASSERT( outputFile );
wxSize size( aSize );
GBR_METADATA* gbr_metadata = static_cast<GBR_METADATA*>( aData );
/* Plot a flashed shape. */
if( ( orient == 0 || orient == 900 || orient == 1800 || orient == 2700 )
&& trace_mode == FILLED )
{
if( orient == 900 || orient == 2700 ) /* orientation turned 90 deg. */
std::swap( size.x, size.y );
DPOINT pos_dev = userToDeviceCoordinates( pos );
int aperture_attrib = gbr_metadata ? gbr_metadata->GetApertureAttrib() : 0;
selectAperture( size, APERTURE::Oval, aperture_attrib );
if( gbr_metadata )
formatNetAttribute( &gbr_metadata->m_NetlistMetadata );
emitDcode( pos_dev, 3 );
}
else /* Plot pad as a segment. */
{
if( size.x > size.y )
{
std::swap( size.x, size.y );
if( orient < 2700 )
orient += 900;
else
orient -= 2700;
}
if( trace_mode == FILLED )
{
// TODO: use an aperture macro to declare the rotated pad
// Flash a pad anchor, if a netlist attribute is set
if( aData )
FlashPadCircle( pos, size.x, trace_mode, aData );
// The pad is reduced to an segment with dy > dx
int delta = size.y - size.x;
int x0 = 0;
int y0 = -delta / 2;
int x1 = 0;
int y1 = delta / 2;
RotatePoint( &x0, &y0, orient );
RotatePoint( &x1, &y1, orient );
GBR_METADATA metadata;
if( gbr_metadata )
{
metadata = *gbr_metadata;
// If the pad is drawn on a copper layer,
// set attribute to GBR_APERTURE_ATTRIB_CONDUCTOR
if( metadata.IsCopper() )
metadata.SetApertureAttrib( GBR_APERTURE_METADATA::GBR_APERTURE_ATTRIB_CONDUCTOR );
// Clear .P attribute, only allowed for flashed items
wxString attrname( ".P" );
metadata.m_NetlistMetadata.ClearAttribute( &attrname );
}
ThickSegment( wxPoint( pos.x + x0, pos.y + y0 ),
wxPoint( pos.x + x1, pos.y + y1 ),
size.x, trace_mode, &metadata );
}
else
{
sketchOval( pos, size, orient, -1 );
}
}
}
