Ejemplos de smb347_default_setback en C++ (Cpp)

Ejemplo n.º 1

Archivo: smb347-charger.c Proyecto: Hundsbuah/Kernel-Nexus7

static int __devinit smb347_probe(struct i2c_client *client,
			const struct i2c_device_id *id)
{
	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
	int ret, irq_num, i;
	uint8_t val, buf[15];

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
		return -EIO;

	charger = kzalloc(sizeof(*charger), GFP_KERNEL);
	if (!charger)
		return -ENOMEM;

	charger->client = client;
	charger->dev = &client->dev;
	i2c_set_clientdata(client, charger);

	/* Restore default setting: APSD Enable & 5/1/HC mode Pin control */
	smb347_default_setback();

	ret = sysfs_create_group(&client->dev.kobj, &smb347_group);
	if (ret) {
		dev_err(&client->dev, "smb347_probe: unable to create the sysfs\n");
	}

	mutex_init(&charger->cable_lock);

	smb347_wq = create_singlethread_workqueue("smb347_wq");
	INIT_DELAYED_WORK_DEFERRABLE(&charger->inok_isr_work, inok_isr_work_function);
	//INIT_DELAYED_WORK(&charger->regs_dump_work, regs_dump_work_func);

	ret = smb347_inok_irq(charger);
	if (ret) {
		dev_err(&client->dev, "%s(): Failed in requesting ACOK# pin isr\n",
				__func__);
		goto error;
	}

	//queue_delayed_work(smb347_wq, &charger->regs_dump_work, 30*HZ);

	cable_type_detect();

	ret = register_otg_callback( (callback_t)smb347_otg_status, charger);

	if (ret < 0)
		goto error;

	return 0;
error:
	kfree(charger);
	return ret;
}

Ejemplo n.º 2

static int __devinit smb347_probe(struct i2c_client *client,
			const struct i2c_device_id *id)
{
	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
	int ret, irq_num;
	uint8_t buf[15];

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
		return -EIO;

	charger = kzalloc(sizeof(*charger), GFP_KERNEL);
	if (!charger)
		return -ENOMEM;

	charger->client = client;
	charger->dev = &client->dev;
	i2c_set_clientdata(client, charger);

	/* Restore default setting: APSD Enable & 5/1/HC mode Pin control */
	smb347_temp_limit_setting();
	smb347_default_setback();

	ret = sysfs_create_group(&client->dev.kobj, &smb347_group);
	if (ret) {
		dev_err(&client->dev, "smb347_probe: unable to create the sysfs\n");
	}

	mutex_init(&charger->cable_lock);
	mutex_init(&charger->dockin_lock);
	mutex_init(&charger->pinctrl_lock);

	wake_lock_init(&charger->wake_lock_dockin, WAKE_LOCK_SUSPEND, "wake_lock_dockin");

	smb347_wq = create_singlethread_workqueue("smb347_wq");
	INIT_DELAYED_WORK_DEFERRABLE(&charger->inok_isr_work, inok_isr_work_function);
	INIT_DELAYED_WORK_DEFERRABLE(&charger->dockin_isr_work, dockin_isr_work_function);
	INIT_DELAYED_WORK_DEFERRABLE(&charger->cable_det_work, cable_type_detect);

	wake_lock_init(&charger_wakelock, WAKE_LOCK_SUSPEND,
			"charger_configuration");
	INIT_DELAYED_WORK(&charger->curr_limit_work,
			smb347_set_curr_limit_work_func);
	INIT_DELAYED_WORK(&charger->test_fail_clear_work,
			smb347_test_fail_clear_work_function);
	charger->curr_limit = UINT_MAX;
	smb347_set_InputCurrentlimit(charger->client, 900);
	charger->cur_cable_type = non_cable;
	charger->old_cable_type = non_cable;
	charger->test_1800mA_fail = 0;

	ret = smb347_dockin_irq(charger);
	if (ret) {
		dev_err(&client->dev, "%s(): Failed in requesting DOCK_IN# pin isr\n",
				__func__);
		goto error;
	}

	ret = smb347_inok_irq(charger);
	if (ret) {
		dev_err(&client->dev, "%s(): Failed in requesting ACOK# pin isr\n",
				__func__);
		goto error;
	}

	queue_delayed_work(smb347_wq, &charger->cable_det_work, 0.5*HZ);

	ret = register_otg_callback(smb347_otg_status, charger);
	if (ret < 0)
		goto error;

	return 0;
error:
	kfree(charger);
	return ret;
}