/*
* smb_com_trans2_find_next2
*
* Client Request Value
* ================================== =================================
*
* WordCount 15
* SetupCount 1
* Setup[0] TRANS2_FIND_NEXT2
*
* Parameter Block Encoding Description
* ================================== =================================
*
* USHORT Sid; Search handle
* USHORT SearchCount; Maximum number of entries to
* return
* USHORT InformationLevel; Levels described in
* TRANS2_FIND_FIRST2 request
* ULONG ResumeKey; Value returned by previous find2
* call
* USHORT Flags; Additional information: bit set-
* 0 - close search after this
* request
* 1 - close search if end of search
* reached
* 2 - return resume keys for each
* entry found
* 3 - resume/continue from previous
* ending place
* 4 - find with backup intent
* STRING FileName; Resume file name
*
* Sid is the value returned by a previous successful TRANS2_FIND_FIRST2
* call. If Bit3 of Flags is set, then FileName may be the NULL string,
* since the search is continued from the previous TRANS2_FIND request.
* Otherwise, FileName must not be more than 256 characters long.
*
* Response Field Description
* ================================== =================================
*
* USHORT SearchCount; Number of entries returned
* USHORT EndOfSearch; Was last entry returned?
* USHORT EaErrorOffset; Offset into EA list if EA error
* USHORT LastNameOffset; Offset into data to file name of
* last entry, if server needs it to
* resume search; else 0
* UCHAR Data[TotalDataCount] Level dependent info about the
* matches found in the search
*
*
* The last parameter in the request is a filename, which is a
* null-terminated unicode string.
*
* smb_mbc_decodef(&xa->req_param_mb, "%www lwu", sr,
* &odid, &fa_maxcount, &fa_infolev, &cookie, &fa_fflag, &fname)
*
* The filename parameter is not currently decoded because we
* expect a 2-byte null but Mac OS 10 clients send a 1-byte null,
* which leads to a decode error.
* Thus, we do not support resume by filename. We treat a request
* to resume by filename as SMB_FIND_CONTINUE_FROM_LAST.
*/
smb_sdrc_t
smb_com_trans2_find_next2(smb_request_t *sr, smb_xa_t *xa)
{
int count;
uint16_t odid;
smb_odir_t *od;
smb_find_args_t args;
smb_odir_resume_t odir_resume;
bzero(&args, sizeof (args));
bzero(&odir_resume, sizeof (odir_resume));
if (!STYPE_ISDSK(sr->tid_tree->t_res_type)) {
smbsr_error(sr, NT_STATUS_ACCESS_DENIED,
ERRDOS, ERROR_ACCESS_DENIED);
return (SDRC_ERROR);
}
if (smb_mbc_decodef(&xa->req_param_mb, "%wwwlwu", sr,
&odid, &args.fa_maxcount, &args.fa_infolev,
&odir_resume.or_cookie, &args.fa_fflag,
&odir_resume.or_fname) != 0) {
return (SDRC_ERROR);
}
if (args.fa_fflag & SMB_FIND_WITH_BACKUP_INTENT)
sr->user_cr = smb_user_getprivcred(sr->uid_user);
args.fa_maxdata =
smb_trans2_find_get_maxdata(sr, args.fa_infolev, args.fa_fflag);
if (args.fa_maxdata == 0)
return (SDRC_ERROR);
od = smb_tree_lookup_odir(sr->tid_tree, odid);
if (od == NULL) {
smbsr_error(sr, NT_STATUS_INVALID_HANDLE,
ERRDOS, ERROR_INVALID_HANDLE);
return (SDRC_ERROR);
}
/*
* Set the correct position in the directory.
*
* "Continue from last" is easy, but due to a history of
* buggy server implementations, most clients don't use
* that method. The most widely used (and reliable) is
* resume by file name. Unfortunately, that can't really
* be fully supported unless your file system stores all
* directory entries in some sorted order (like NTFS).
* We can partially support resume by name, where the only
* name we're ever asked to resume on is the same as the
* most recent we returned. That's always what the client
* gives us as the resume name, so we can simply remember
* the last name/offset pair and use that to position on
* the following FindNext call. In the unlikely event
* that the client asks to resume somewhere else, we'll
* use the numeric resume key, and hope the client gives
* correctly uses one of the resume keys we provided.
*/
if (args.fa_fflag & SMB_FIND_CONTINUE_FROM_LAST) {
odir_resume.or_type = SMB_ODIR_RESUME_CONT;
} else {
odir_resume.or_type = SMB_ODIR_RESUME_FNAME;
}
smb_odir_resume_at(od, &odir_resume);
count = smb_trans2_find_entries(sr, xa, od, &args);
if (count == -1) {
smb_odir_close(od);
smb_odir_release(od);
return (SDRC_ERROR);
}
if ((args.fa_fflag & SMB_FIND_CLOSE_AFTER_REQUEST) ||
(args.fa_eos && (args.fa_fflag & SMB_FIND_CLOSE_AT_EOS))) {
smb_odir_close(od);
} /* else leave odir open for trans2_find_next2 */
smb_odir_release(od);
(void) smb_mbc_encodef(&xa->rep_param_mb, "wwww",
count, /* Search Count */
args.fa_eos, /* End Of Search */
0, /* EA Error Offset */
args.fa_lno); /* Last Name Offset */
return (SDRC_SUCCESS);
}
/*
* smb_com_trans2_find_next2
*
* Client Request Value
* ================================== =================================
*
* WordCount 15
* SetupCount 1
* Setup[0] TRANS2_FIND_NEXT2
*
* Parameter Block Encoding Description
* ================================== =================================
*
* USHORT Sid; Search handle
* USHORT SearchCount; Maximum number of entries to
* return
* USHORT InformationLevel; Levels described in
* TRANS2_FIND_FIRST2 request
* ULONG ResumeKey; Value returned by previous find2
* call
* USHORT Flags; Additional information: bit set-
* 0 - close search after this
* request
* 1 - close search if end of search
* reached
* 2 - return resume keys for each
* entry found
* 3 - resume/continue from previous
* ending place
* 4 - find with backup intent
* STRING FileName; Resume file name
*
* Sid is the value returned by a previous successful TRANS2_FIND_FIRST2
* call. If Bit3 of Flags is set, then FileName may be the NULL string,
* since the search is continued from the previous TRANS2_FIND request.
* Otherwise, FileName must not be more than 256 characters long.
*
* Response Field Description
* ================================== =================================
*
* USHORT SearchCount; Number of entries returned
* USHORT EndOfSearch; Was last entry returned?
* USHORT EaErrorOffset; Offset into EA list if EA error
* USHORT LastNameOffset; Offset into data to file name of
* last entry, if server needs it to
* resume search; else 0
* UCHAR Data[TotalDataCount] Level dependent info about the
* matches found in the search
*
*
* The last parameter in the request is a filename, which is a
* null-terminated unicode string.
*
* smb_mbc_decodef(&xa->req_param_mb, "%www lwu", sr,
* &odid, &fa_maxcount, &fa_infolev, &cookie, &fa_fflag, &fname)
*
* The filename parameter is not currently decoded because we
* expect a 2-byte null but Mac OS 10 clients send a 1-byte null,
* which leads to a decode error.
* Thus, we do not support resume by filename. We treat a request
* to resume by filename as SMB_FIND_CONTINUE_FROM_LAST.
*/
smb_sdrc_t
smb_com_trans2_find_next2(smb_request_t *sr, smb_xa_t *xa)
{
int count;
uint16_t odid;
uint32_t cookie;
smb_odir_t *od;
smb_find_args_t args;
boolean_t eos;
smb_odir_resume_t odir_resume;
bzero(&args, sizeof (smb_find_args_t));
if (smb_mbc_decodef(&xa->req_param_mb, "%wwwlw", sr, &odid,
&args.fa_maxcount, &args.fa_infolev, &cookie, &args.fa_fflag)
!= 0) {
return (SDRC_ERROR);
}
/* continuation by filename not supported */
if ((args.fa_fflag & SMB_FIND_CONTINUE_FROM_LAST) || (cookie == 0)) {
odir_resume.or_type = SMB_ODIR_RESUME_IDX;
odir_resume.or_idx = 0;
} else {
odir_resume.or_type = SMB_ODIR_RESUME_COOKIE;
odir_resume.or_cookie = cookie;
}
if (args.fa_fflag & SMB_FIND_WITH_BACKUP_INTENT)
sr->user_cr = smb_user_getprivcred(sr->uid_user);
args.fa_maxdata =
smb_trans2_find_get_maxdata(sr, args.fa_infolev, args.fa_fflag);
if (args.fa_maxdata == 0)
return (SDRC_ERROR);
od = smb_tree_lookup_odir(sr->tid_tree, odid);
if (od == NULL) {
smbsr_error(sr, NT_STATUS_INVALID_HANDLE,
ERRDOS, ERROR_INVALID_HANDLE);
return (SDRC_ERROR);
}
smb_odir_resume_at(od, &odir_resume);
count = smb_trans2_find_entries(sr, xa, od, &args, &eos);
if (count == -1) {
smb_odir_close(od);
smb_odir_release(od);
return (SDRC_ERROR);
}
if ((args.fa_fflag & SMB_FIND_CLOSE_AFTER_REQUEST) ||
(eos && (args.fa_fflag & SMB_FIND_CLOSE_AT_EOS))) {
smb_odir_close(od);
} /* else leave odir open for trans2_find_next2 */
smb_odir_release(od);
(void) smb_mbc_encodef(&xa->rep_param_mb, "wwww",
count, (eos) ? 1 : 0, 0, 0);
return (SDRC_SUCCESS);
}
/*
* smb_com_trans2_find_first2
*
* Client Request Value
* ============================ ==================================
*
* UCHAR WordCount 15
* UCHAR TotalDataCount Total size of extended attribute list
* UCHAR SetupCount 1
* UCHAR Setup[0] TRANS2_FIND_FIRST2
*
* Parameter Block Encoding Description
* ============================ ==================================
* USHORT SearchAttributes;
* USHORT SearchCount; Maximum number of entries to return
* USHORT Flags; Additional information:
* Bit 0 - close search after this request
* Bit 1 - close search if end of search
* reached
* Bit 2 - return resume keys for each
* entry found
* Bit 3 - continue search from previous
* ending place
* Bit 4 - find with backup intent
* USHORT InformationLevel; See below
* ULONG SearchStorageType;
* STRING FileName; Pattern for the search
* UCHAR Data[ TotalDataCount ] FEAList if InformationLevel is
* QUERY_EAS_FROM_LIST
*
* Response Parameter Block Description
* ============================ ==================================
*
* USHORT Sid; Search handle
* USHORT SearchCount; Number of entries returned
* USHORT EndOfSearch; Was last entry returned?
* USHORT EaErrorOffset; Offset into EA list if EA error
* USHORT LastNameOffset; Offset into data to file name of last
* entry, if server needs it to resume
* search; else 0
* UCHAR Data[ TotalDataCount ] Level dependent info about the matches
* found in the search
*/
smb_sdrc_t
smb_com_trans2_find_first2(smb_request_t *sr, smb_xa_t *xa)
{
int count;
uint16_t sattr, odid;
smb_pathname_t *pn;
smb_odir_t *od;
smb_find_args_t args;
uint32_t odir_flags = 0;
bzero(&args, sizeof (smb_find_args_t));
if (!STYPE_ISDSK(sr->tid_tree->t_res_type)) {
smbsr_error(sr, NT_STATUS_ACCESS_DENIED,
ERRDOS, ERROR_ACCESS_DENIED);
return (SDRC_ERROR);
}
pn = &sr->arg.dirop.fqi.fq_path;
if (smb_mbc_decodef(&xa->req_param_mb, "%wwww4.u", sr, &sattr,
&args.fa_maxcount, &args.fa_fflag, &args.fa_infolev,
&pn->pn_path) != 0) {
return (SDRC_ERROR);
}
smb_pathname_init(sr, pn, pn->pn_path);
if (!smb_pathname_validate(sr, pn))
return (-1);
if (smb_is_stream_name(pn->pn_path)) {
smbsr_error(sr, NT_STATUS_OBJECT_NAME_INVALID,
ERRDOS, ERROR_INVALID_NAME);
return (SDRC_ERROR);
}
if (args.fa_fflag & SMB_FIND_WITH_BACKUP_INTENT) {
sr->user_cr = smb_user_getprivcred(sr->uid_user);
odir_flags = SMB_ODIR_OPENF_BACKUP_INTENT;
}
args.fa_maxdata =
smb_trans2_find_get_maxdata(sr, args.fa_infolev, args.fa_fflag);
if (args.fa_maxdata == 0)
return (SDRC_ERROR);
odid = smb_odir_open(sr, pn->pn_path, sattr, odir_flags);
if (odid == 0) {
if (sr->smb_error.status == NT_STATUS_OBJECT_PATH_NOT_FOUND) {
smbsr_error(sr, NT_STATUS_OBJECT_NAME_NOT_FOUND,
ERRDOS, ERROR_FILE_NOT_FOUND);
}
return (SDRC_ERROR);
}
od = smb_tree_lookup_odir(sr->tid_tree, odid);
if (od == NULL)
return (SDRC_ERROR);
count = smb_trans2_find_entries(sr, xa, od, &args);
if (count == -1) {
smb_odir_close(od);
smb_odir_release(od);
return (SDRC_ERROR);
}
if (count == 0) {
smb_odir_close(od);
smb_odir_release(od);
smbsr_errno(sr, ENOENT);
return (SDRC_ERROR);
}
if ((args.fa_fflag & SMB_FIND_CLOSE_AFTER_REQUEST) ||
(args.fa_eos && (args.fa_fflag & SMB_FIND_CLOSE_AT_EOS))) {
smb_odir_close(od);
} /* else leave odir open for trans2_find_next2 */
smb_odir_release(od);
(void) smb_mbc_encodef(&xa->rep_param_mb, "wwwww",
odid, /* Search ID */
count, /* Search Count */
args.fa_eos, /* End Of Search */
0, /* EA Error Offset */
args.fa_lno); /* Last Name Offset */
return (SDRC_SUCCESS);
}
/*
* smb_com_trans2_find_first2
*
* Client Request Value
* ============================ ==================================
*
* UCHAR WordCount 15
* UCHAR TotalDataCount Total size of extended attribute list
* UCHAR SetupCount 1
* UCHAR Setup[0] TRANS2_FIND_FIRST2
*
* Parameter Block Encoding Description
* ============================ ==================================
* USHORT SearchAttributes;
* USHORT SearchCount; Maximum number of entries to return
* USHORT Flags; Additional information:
* Bit 0 - close search after this request
* Bit 1 - close search if end of search
* reached
* Bit 2 - return resume keys for each
* entry found
* Bit 3 - continue search from previous
* ending place
* Bit 4 - find with backup intent
* USHORT InformationLevel; See below
* ULONG SearchStorageType;
* STRING FileName; Pattern for the search
* UCHAR Data[ TotalDataCount ] FEAList if InformationLevel is
* QUERY_EAS_FROM_LIST
*
* Response Parameter Block Description
* ============================ ==================================
*
* USHORT Sid; Search handle
* USHORT SearchCount; Number of entries returned
* USHORT EndOfSearch; Was last entry returned?
* USHORT EaErrorOffset; Offset into EA list if EA error
* USHORT LastNameOffset; Offset into data to file name of last
* entry, if server needs it to resume
* search; else 0
* UCHAR Data[ TotalDataCount ] Level dependent info about the matches
* found in the search
*/
smb_sdrc_t
smb_com_trans2_find_first2(smb_request_t *sr, smb_xa_t *xa)
{
int count;
uint16_t sattr, odid;
char *path;
smb_odir_t *od;
smb_find_args_t args;
boolean_t eos;
uint32_t odir_flags = 0;
bzero(&args, sizeof (smb_find_args_t));
if (!STYPE_ISDSK(sr->tid_tree->t_res_type)) {
smbsr_error(sr, NT_STATUS_ACCESS_DENIED,
ERRDOS, ERROR_ACCESS_DENIED);
return (SDRC_ERROR);
}
if (smb_mbc_decodef(&xa->req_param_mb, "%wwww4.u", sr, &sattr,
&args.fa_maxcount, &args.fa_fflag, &args.fa_infolev, &path) != 0) {
return (SDRC_ERROR);
}
if (smb_is_stream_name(path)) {
smbsr_error(sr, NT_STATUS_OBJECT_NAME_INVALID,
ERRDOS, ERROR_INVALID_NAME);
return (SDRC_ERROR);
}
if (args.fa_fflag & SMB_FIND_WITH_BACKUP_INTENT) {
sr->user_cr = smb_user_getprivcred(sr->uid_user);
odir_flags = SMB_ODIR_OPENF_BACKUP_INTENT;
}
args.fa_maxdata =
smb_trans2_find_get_maxdata(sr, args.fa_infolev, args.fa_fflag);
if (args.fa_maxdata == 0)
return (SDRC_ERROR);
if (sr->smb_flg2 & SMB_FLAGS2_UNICODE)
(void) smb_convert_wildcards(path);
odid = smb_odir_open(sr, path, sattr, odir_flags);
if (odid == 0)
return (SDRC_ERROR);
od = smb_tree_lookup_odir(sr->tid_tree, odid);
if (od == NULL)
return (SDRC_ERROR);
count = smb_trans2_find_entries(sr, xa, od, &args, &eos);
if (count == -1) {
smb_odir_close(od);
smb_odir_release(od);
return (SDRC_ERROR);
}
if (count == 0) {
smb_odir_close(od);
smb_odir_release(od);
smbsr_errno(sr, ENOENT);
return (SDRC_ERROR);
}
if ((args.fa_fflag & SMB_FIND_CLOSE_AFTER_REQUEST) ||
(eos && (args.fa_fflag & SMB_FIND_CLOSE_AT_EOS))) {
smb_odir_close(od);
} /* else leave odir open for trans2_find_next2 */
smb_odir_release(od);
(void) smb_mbc_encodef(&xa->rep_param_mb, "wwwww",
odid, count, (eos) ? 1 : 0, 0, 0);
return (SDRC_SUCCESS);
}
