/* Main function */
int main(void)
{
uint32_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
utils_setup();
// Setup SoftDevice and events handler
err_code = softdevice_ant_evt_handler_set(continuous_scan_event_handler);
APP_ERROR_CHECK(err_code);
err_code = softdevice_handler_init(&clock_lf_cfg, NULL, 0, NULL);
APP_ERROR_CHECK(err_code);
err_code = ant_stack_static_config();
APP_ERROR_CHECK(err_code);
continuous_scan_init();
err_code = app_timer_create(&m_scan_timer_id,
APP_TIMER_MODE_SINGLE_SHOT,
scan_timeout_event);
APP_ERROR_CHECK(err_code);
// Enter main loop
for (;;)
{
err_code = sd_app_evt_wait();
APP_ERROR_CHECK(err_code);
}
}
uint32_t dfu_transport_update_start(void)
{
uint32_t err_code;
m_antfs_dfu_state = ANTFS_DFU_STATE_RESET;
err_code = softdevice_ant_evt_handler_set(ant_evt_dispatch);
if (err_code != NRF_SUCCESS)
{
return err_code;
}
// DFU flash activity call back.
dfu_register_callback(dfu_cb_handler);
// initialize mem_pools
m_mem_pool_1.size = 0;
m_mem_pool_2.size = 0;
// It is expected that there was no ANTFS related activities before this point.
// Check if flash is busy pre-initializing.
// If Flash is still initializing wait until it is done.
if (flash_busy())
{
// Postpone services init and ANTFS init until flash is done.
m_antfs_dfu_state = ANTFS_DFU_STATE_INIT_DELAYED;
return NRF_SUCCESS;
}
// Start services right away if flash not busy
services_init();
return NRF_SUCCESS;
}
/**@brief Function for application main entry. Does not return.
*/
int main(void)
{
uint32_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
// Setup buttons and timer
utils_setup();
LEDS_CONFIGURE(LEDS_MASK);
// Setup SoftDevice and events handler
err_code = softdevice_ant_evt_handler_set(ant_async_tx_event_handler);
APP_ERROR_CHECK(err_code);
err_code = softdevice_handler_init(&clock_lf_cfg, NULL, 0, NULL);
APP_ERROR_CHECK(err_code);
err_code = ant_stack_static_config();
APP_ERROR_CHECK(err_code);
// Setup async tx channel
ant_async_tx_setup(APP_TIMER_PRESCALER);
// Enter main loop
for (;;)
{
err_code = sd_app_evt_wait();
APP_ERROR_CHECK(err_code);
}
}
/**@brief Function for application main entry. Does not return.
*/
int main(void)
{
uint32_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
utils_setup();
// Enable SoftDevice.
err_code = softdevice_ant_evt_handler_set(ant_evt_dispatch);
APP_ERROR_CHECK(err_code);
err_code = softdevice_handler_init(&clock_lf_cfg, NULL, 0, NULL);
APP_ERROR_CHECK(err_code);
err_code = ant_stack_static_config();
APP_ERROR_CHECK(err_code);
// Setup and open Channel_0 as a Bidirectional Master.
app_channel_setup();
#ifdef INCLUDE_DEBUG_CHANNEL
// Setup and open Debug Channel
ad_init();
ad_register_custom_command_callback(app_custom_debug_command_handler);
#endif
// Enter main loop
for (;;)
{
err_code = sd_app_evt_wait();
APP_ERROR_CHECK(err_code);
}
}
/**@brief Function for ANT stack initialization.
*
* @details Initializes the SoftDevice and the ANT+BLE event interrupt.
*/
static void softdevice_and_stack_setup(void)
{
uint32_t err_code;
SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL);
ant_state_indicator_init(m_ant_sdm.channel_number, SDM_SENS_CHANNEL_TYPE);
// Initialize BLE stack
ble_enable_params_t ble_enable_params;
memset(&ble_enable_params, 0, sizeof(ble_enable_params));
ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
err_code = sd_ble_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Subscribe for BLE events.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
// Subscribe for ANT events.
err_code = softdevice_ant_evt_handler_set(ant_evt_dispatch);
APP_ERROR_CHECK(err_code);
#ifdef BONDING_ENABLE
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
APP_ERROR_CHECK(err_code);
#endif // BONDING_ENABLE
err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUMBER);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for application main entry. Does not return.
*/
int main(void)
{
uint32_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
utils_setup();
// Setup SoftDevice and events handler
err_code = softdevice_ant_evt_handler_set(ant_io_tx_event_handler);
APP_ERROR_CHECK(err_code);
err_code = softdevice_handler_init(&clock_lf_cfg, NULL, 0, NULL);
APP_ERROR_CHECK(err_code);
err_code = ant_stack_static_config();
APP_ERROR_CHECK(err_code);
// Setup and start ANT channel
ant_io_tx_setup();
// Enter main loop.
for (;;)
{
err_code = sd_app_evt_wait();
APP_ERROR_CHECK(err_code);
}
}
/**@brief Function for ANT stack initialization.
*
* @details Initializes the SoftDevice and the ANT event interrupt.
*/
static void softdevice_setup(void)
{
uint32_t err_code;
err_code = softdevice_ant_evt_handler_set(ant_evt_dispatch);
APP_ERROR_CHECK(err_code);
err_code = softdevice_handler_init(NRF_CLOCK_LFCLKSRC, NULL, 0, NULL);
APP_ERROR_CHECK(err_code);
err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUMBER);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for ANT stack initialization.
*
* @details Initializes the SoftDevice and the ANT event interrupt.
*/
static void softdevice_setup(void)
{
uint32_t err_code;
err_code = softdevice_ant_evt_handler_set(ant_evt_dispatch);
APP_ERROR_CHECK(err_code);
err_code = softdevice_handler_init(NRF_CLOCK_LFCLKSRC, NULL, 0, NULL);
APP_ERROR_CHECK(err_code);
err_code = ant_stack_static_config();
APP_ERROR_CHECK(err_code);
}
/**
* @brief Function for ANT stack initialization.
*
* @details Initializes the SoftDevice and the ANT event interrupt.
*/
static void softdevice_setup(void)
{
uint32_t err_code;
err_code = softdevice_ant_evt_handler_set(ant_evt_dispatch);
APP_ERROR_CHECK(err_code);
err_code = softdevice_handler_init(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL, 0, NULL);
APP_ERROR_CHECK(err_code);
err_code = ant_stack_static_config(); // set ant resource
APP_ERROR_CHECK(err_code);
err_code = sd_ant_network_address_set(ANTPLUS_NETWORK_NUMBER, m_network_key);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for ANT stack initialization.
*
* @details Initializes the SoftDevice and the ANT event interrupt.
*/
static void softdevice_setup(void)
{
uint32_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
err_code = softdevice_ant_evt_handler_set(ant_evt_dispatch);
APP_ERROR_CHECK(err_code);
err_code = softdevice_handler_init(&clock_lf_cfg, NULL, 0, NULL);
APP_ERROR_CHECK(err_code);
err_code = ant_stack_static_config();
APP_ERROR_CHECK(err_code);
err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUMBER);
APP_ERROR_CHECK(err_code);
}
/**@brief BLE + ANT stack initialization.
*
* @details Initializes the SoftDevice and the stack event interrupt.
*/
static void ble_ant_stack_init(void)
{
// Initialize SoftDevice
SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, false);
// Subscribe for BLE events.
uint32_t err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
// Subscribe for ANT events.
err_code = softdevice_ant_evt_handler_set(on_ant_evt);
APP_ERROR_CHECK(err_code);
#ifdef BONDING_ENABLE
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
APP_ERROR_CHECK(err_code);
#endif // BONDING_ENABLE
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
uint32_t err_code;
// Initialize the SoftDevice handler module.
SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL);
// Enable BLE stack.
ble_enable_params_t ble_enable_params;
memset(&ble_enable_params, 0, sizeof(ble_enable_params));
#ifdef S130
ble_enable_params.gatts_enable_params.attr_tab_size = BLE_GATTS_ATTR_TAB_SIZE_DEFAULT;
#endif
err_code = sd_ble_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for System events.
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
APP_ERROR_CHECK(err_code);
err_code = softdevice_ant_evt_handler_set(ant_evt_dispatch);
APP_ERROR_CHECK(err_code);
// TODO check this
err_code = ant_stack_static_config();
APP_ERROR_CHECK(err_code);
err_code = sd_ant_network_address_set(ANTPLUS_NETWORK_NUMBER, m_network_key);
APP_ERROR_CHECK(err_code);
}
