Ejemplos de spmi_init en C++ (Cpp)

Ejemplo n.º 1

Archivo: init.c Proyecto: BorqsIndia/bootable-bootloader-lk

void target_init(void)
{
	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	target_keystatus();

	target_sdc_init();
	if (partition_read_table())
	{
		dprintf(CRITICAL, "Error reading the partition table info\n");
		ASSERT(0);
	}

#if LONG_PRESS_POWER_ON
	shutdown_detect();
#endif

#if PON_VIB_SUPPORT
	/* turn on vibrator to indicate that phone is booting up to end user */
	vib_timed_turn_on(VIBRATE_TIME);
#endif

	if (target_use_signed_kernel())
		target_crypto_init_params();

#if SMD_SUPPORT
	rpm_smd_init();
#endif
}

Ejemplo n.º 2

Archivo: init.c Proyecto: sztablet2016/Android-kernel-lk

void target_init(void)
{
	uint32_t base_addr;
	uint8_t slot;

	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	target_keystatus();
	config.pipes.read_pipe = DATA_PRODUCER_PIPE;
	config.pipes.write_pipe = DATA_CONSUMER_PIPE;
	config.pipes.cmd_pipe = CMD_PIPE;

	config.pipes.read_pipe_grp = DATA_PRODUCER_PIPE_GRP;
	config.pipes.write_pipe_grp = DATA_CONSUMER_PIPE_GRP;
	config.pipes.cmd_pipe_grp = CMD_PIPE_GRP;

	config.bam_base = MSM_NAND_BAM_BASE;
	config.nand_base = MSM_NAND_BASE;
	config.ee = QPIC_NAND_EE;
	config.max_desc_len = QPIC_NAND_MAX_DESC_LEN;

	qpic_nand_init(&config);

	ptable_init(&flash_ptable);
	smem_ptable_init();
	smem_add_modem_partitions(&flash_ptable);

	update_ptable_names();
	flash_set_ptable(&flash_ptable);
}

Ejemplo n.º 3

Archivo: init.c Proyecto: nx511j-multirom/bootloader_lk

void target_init(void)
{
	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	/* Save PM8941 version info. */
	pmic_ver = pm8x41_get_pmic_rev();

	target_keystatus();

	if (target_use_signed_kernel())
		target_crypto_init_params();

	/*
	 * Set drive strength & pull ctrl for
	 * emmc
	 */
	set_sdc_power_ctrl();

#if MMC_SDHCI_SUPPORT
	target_mmc_sdhci_init();
#else
	target_mmc_mci_init();
#endif
}

Ejemplo n.º 4

Archivo: init.c Proyecto: mikeNG/android_bootable_bootloader_lk

void target_init(void)
{
    dprintf(INFO, "target_init()\n");

    spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

    target_keystatus();

    target_sdc_init();
    if (partition_read_table())
    {
        dprintf(CRITICAL, "Error reading the partition table info\n");
        ASSERT(0);
    }

#if LONG_PRESS_POWER_ON
    shutdown_detect();
#endif
    if (target_use_signed_kernel())
        target_crypto_init_params();

#if SMD_SUPPORT
    rpm_smd_init();
#endif
}

Ejemplo n.º 5

Archivo: init.c Proyecto: joyfish/android_bootable_bootloader_lk

void target_init(void)
{
	uint32_t base_addr;
	uint8_t slot;

	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	/* Trying Slot 1*/
	slot = 1;
	base_addr = mmc_sdc_base[slot - 1];

	if (mmc_boot_main(slot, base_addr))
	{
		/* Trying Slot 2 next */
		slot = 2;
		base_addr = mmc_sdc_base[slot - 1];

		if (mmc_boot_main(slot, base_addr))
		{
			dprintf(CRITICAL, "mmc init failed!");
			ASSERT(0);
		}
	}
}

Ejemplo n.º 6

Archivo: init.c Proyecto: joyfish/android_bootable_bootloader_lk

void target_init(void)
{
	uint32_t base_addr;
	uint8_t slot;

	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	target_keystatus();

	if (target_use_signed_kernel())
		target_crypto_init_params();
	/* Display splash screen if enabled */
#if DISPLAY_SPLASH_SCREEN
	dprintf(INFO, "Display Init: Start\n");
	display_init();
	dprintf(INFO, "Display Init: Done\n");
#endif

	/* Trying Slot 1*/
	slot = 1;
	base_addr = mmc_sdc_base[slot - 1];
	if (mmc_boot_main(slot, base_addr))
	{

		/* Trying Slot 2 next */
		slot = 2;
		base_addr = mmc_sdc_base[slot - 1];
		if (mmc_boot_main(slot, base_addr)) {
			dprintf(CRITICAL, "mmc init failed!");
			ASSERT(0);
		}
	}
}

Ejemplo n.º 7

Archivo: init.c Proyecto: GoldRenard/android_bootable_bootloader_lk-shellr

void target_init(void)
{
	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	/* Save PM8941 version info. */
	pmic_ver = pm8x41_get_pmic_rev();

	target_keystatus();

	if (target_use_signed_kernel())
		target_crypto_init_params();
	/* Display splash screen if enabled */
#if DISPLAY_SPLASH_SCREEN
	dprintf(INFO, "Display Init: Start\n");
	if (board_hardware_subtype() != HW_PLATFORM_SUBTYPE_CDP_INTERPOSER)
	{
		display_init();
	}
	dprintf(INFO, "Display Init: Done\n");
#endif

	/*
	 * Set drive strength & pull ctrl for
	 * emmc
	 */
	set_sdc_power_ctrl();

#if MMC_SDHCI_SUPPORT
	target_mmc_sdhci_init();
#else
	target_mmc_mci_init();
#endif
}

Ejemplo n.º 8

Archivo: init.c Proyecto: M1cha/lktris

void target_init(void)
{
	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	target_keystatus();

	if (target_use_signed_kernel())
		target_crypto_init_params();

	platform_read_boot_config();

	if (platform_boot_dev_isemmc())
		target_sdc_init();
	else
	{
		ufs_device.base = UFS_BASE;
		ufs_init(&ufs_device);
	}

	/* Storage initialization is complete, read the partition table info */
	if (partition_read_table())
	{
		dprintf(CRITICAL, "Error reading the partition table info\n");
		ASSERT(0);
	}
}

Ejemplo n.º 9

Archivo: uefiapi.c Proyecto: cancro-dev/lk_candyboot

void api_platform_init(void) {
	// from target_init
	// Initialize PMIC driver
	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	keys_init();
	keys_add_source(&event_source);
	event_source.keymap[0].enable_longpress = true;
}

Ejemplo n.º 10

Archivo: init.c Proyecto: detule/lk-g2-spr

void target_init(void)
{
	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	target_keystatus();

	target_sdc_init();

	/* Display splash screen if enabled */
#if DISPLAY_SPLASH_SCREEN
	dprintf(SPEW, "Display Init: Start\n");
	display_init();
	dprintf(SPEW, "Display Init: Done\n");
#endif

	if (target_use_signed_kernel())
		target_crypto_init_params();
}

Ejemplo n.º 11

Archivo: init.c Proyecto: daxgr/android_bootable_bootloader_lk

void target_init(void)
{
	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	/* Save PM8941 version info. */
	pmic_ver = pm8x41_get_pmic_rev();

	target_keystatus();

	if (target_use_signed_kernel())
		target_crypto_init_params();
	/* Display splash screen if enabled */
#if DISPLAY_SPLASH_SCREEN
	dprintf(INFO, "Display Init: Start\n");
	display_init();
	dprintf(INFO, "Display Init: Done\n");
#endif

	/*
	 * Set drive strength & pull ctrl for
	 * emmc
	 */
	set_sdc_power_ctrl();

#if MMC_SDHCI_SUPPORT
	target_mmc_sdhci_init();
#else
	target_mmc_mci_init();
#endif

	/*
	 * MMC initialization is complete, read the partition table info
	 */
	if (partition_read_table()) {
		dprintf(CRITICAL, "Error reading the partition table info\n");
		ASSERT(0);
	}
}

Ejemplo n.º 12

Archivo: init.c Proyecto: cancro-dev/lk_candyboot

void target_init(void)
{
	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	target_keystatus();

	target_sdc_init();

#if LONG_PRESS_POWER_ON
	shutdown_detect();
#endif

#if PON_VIB_SUPPORT
	/* turn on vibrator to indicate that phone is booting up to end user */
	vib_timed_turn_on(VIBRATE_TIME);
#endif

	if (target_use_signed_kernel())
		target_crypto_init_params();
}

Ejemplo n.º 13

Archivo: init.c Proyecto: sndnvaps/lk-1

void target_init(void)
{
	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	target_keystatus();


	if (target_use_signed_kernel())
		target_crypto_init_params();

	platform_read_boot_config();

	if (platform_boot_dev_isemmc())
	{
		target_sdc_init();
	}
	else
	{
		ufs_device.base = UFS_BASE;
		ufs_init(&ufs_device);
	}

	/* Storage initialization is complete, read the partition table info */
	if (partition_read_table())
	{
		dprintf(CRITICAL, "Error reading the partition table info\n");
		ASSERT(0);
	}

	rpm_smd_init();

	/* QPNP WLED init for display backlight */
	pm8x41_wled_config_slave_id(PMIC_WLED_SLAVE_ID);
	qpnp_wled_init();
}

Ejemplo n.º 14

Archivo: init.c Proyecto: cancro-dev/lk_candyboot

void target_init(void)
{
#if VERIFIED_BOOT
#if !VBOOT_MOTA
	int ret = 0;
#endif
#endif

	dprintf(INFO, "target_init()\n");

	spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);

	target_keystatus();


	if (target_use_signed_kernel())
		target_crypto_init_params();

	platform_read_boot_config();

#ifdef MMC_SDHCI_SUPPORT
	if (platform_boot_dev_isemmc())
	{
		target_sdc_init();
	}
#endif
#ifdef UFS_SUPPORT
	if(!platform_boot_dev_isemmc())
	{
		ufs_device.base = UFS_BASE;
		ufs_init(&ufs_device);
	}
#endif
	/* Storage initialization is complete, read the partition table info */
	mmc_read_partition_table(0);

#if VERIFIED_BOOT
#if !VBOOT_MOTA
	/* Initialize Qseecom */
	ret = qseecom_init();

	if (ret < 0)
	{
		dprintf(CRITICAL, "Failed to initialize qseecom, error: %d\n", ret);
		ASSERT(0);
	}

	/* Start Qseecom */
	ret = qseecom_tz_init();

	if (ret < 0)
	{
		dprintf(CRITICAL, "Failed to start qseecom, error: %d\n", ret);
		ASSERT(0);
	}

	if (rpmb_init() < 0)
	{
		dprintf(CRITICAL, "RPMB init failed\n");
		ASSERT(0);
	}

	/*
	 * Load the sec app for first time
	 */
	if (load_sec_app() < 0)
	{
		dprintf(CRITICAL, "Failed to load App for verified\n");
		ASSERT(0);
	}
#endif
#endif

	rpm_smd_init();

	/* QPNP LED init for boot process notification */
	if (board_hardware_id() == HW_PLATFORM_LIQUID){
		pm8x41_wled_config_slave_id(PMIC_LED_SLAVE_ID);
		qpnp_led_init(QPNP_LED_BLUE, QPNP_LED_CTRL_BASE,
			QPNP_BLUE_LPG_CTRL_BASE);
	}

}