int execute_populate(CONFIG *cfg)
{
WT_CONNECTION *conn;
WT_SESSION *session;
pthread_t *threads;
double secs;
int ret;
uint64_t elapsed, last_ops;
struct timeval e;
conn = cfg->conn;
cfg->phase = WT_PERF_POP;
lprintf(cfg, 0, 1, "Starting populate threads");
/* First create the table. */
if ((ret = conn->open_session(conn, NULL, NULL, &session)) != 0) {
lprintf(cfg, ret, 0,
"Error opening a session on %s", cfg->home);
return (ret);
}
if ((ret = session->create(
session, cfg->uri, cfg->table_config)) != 0) {
lprintf(cfg, ret, 0, "Error creating table %s", cfg->uri);
session->close(session, NULL);
return (ret);
}
session->close(session, NULL);
if ((ret = start_threads(
cfg, cfg->populate_threads, &threads, populate_thread)) != 0)
return (ret);
gettimeofday(&cfg->phase_start_time, NULL);
for (cfg->elapsed_time = 0, elapsed = last_ops = 0;
g_npop_ops < cfg->icount &&
g_threads_quit < cfg->populate_threads;) {
/*
* Sleep for 100th of a second, report_interval is in second
* granularity, so adjust accordingly.
*/
usleep(10000);
elapsed += 1;
if (elapsed % 100 == 0 &&
(elapsed / 100) % cfg->report_interval == 0) {
lprintf(cfg, 0, 1, "%" PRIu64 " ops in %d secs",
g_npop_ops - last_ops, cfg->report_interval);
last_ops = g_npop_ops;
}
}
if (g_threads_quit == cfg->populate_threads) {
lprintf(cfg, WT_ERROR, 0,
"Populate threads exited without finishing.");
return (WT_ERROR);
}
gettimeofday(&e, NULL);
if ((ret = stop_threads(cfg, cfg->populate_threads, threads)) != 0)
return (ret);
lprintf(cfg, 0, 1,
"Finished load of %d items", cfg->icount);
secs = e.tv_sec + e.tv_usec / 1000000.0;
secs -= (cfg->phase_start_time.tv_sec +
cfg->phase_start_time.tv_usec / 1000000.0);
if (secs == 0)
++secs;
lprintf(cfg, 0, 1,
"Load time: %.2f\n" "load ops/sec: %.2f",
secs, cfg->icount / secs);
return (0);
}
int
main(int argc, char **argv)
{
int addrtype = 0;
int scriptaddrtype = 5;
int privtype = 128;
int pubkeytype;
enum vg_format format = VCF_PUBKEY;
int regex = 0;
int caseinsensitive = 0;
int verbose = 1;
int simulate = 0;
int remove_on_match = 1;
int only_one = 0;
int prompt_password = 0;
int opt;
char *seedfile = NULL;
char pwbuf[128];
const char *result_file = NULL;
const char *key_password = NULL;
char **patterns;
int npatterns = 0;
int nthreads = 0;
vg_context_t *vcp = NULL;
EC_POINT *pubkey_base = NULL;
FILE *pattfp[MAX_FILE], *fp;
int pattfpi[MAX_FILE];
int npattfp = 0;
int pattstdin = 0;
int compressed = 1;
int i;
while ((opt = getopt(argc, argv, "vqnrik1eE:P:NTX:F:t:h?f:o:s:")) != -1) {
switch (opt) {
case 'v':
verbose = 2;
break;
case 'q':
verbose = 0;
break;
case 'n':
simulate = 1;
break;
case 'r':
regex = 1;
break;
case 'i':
caseinsensitive = 1;
break;
case 'k':
remove_on_match = 0;
break;
case '1':
only_one = 1;
break;
case 'N':
addrtype = 52;
privtype = 180;
scriptaddrtype = -1;
break;
case 'T':
addrtype = 111;
privtype = 239;
scriptaddrtype = 196;
break;
case 'X':
addrtype = atoi(optarg);
privtype = 128 + addrtype;
scriptaddrtype = addrtype;
break;
case 'F':
if (!strcmp(optarg, "script")){
format = VCF_SCRIPT;
}
else if(!strcmp(optarg,"uncompressed")){
compressed = 0;
}else if (strcmp(optarg, "pubkey")) {
fprintf(stderr,
"Invalid format '%s'\n", optarg);
return 1;
}
break;
case 'P': {
if (pubkey_base != NULL) {
fprintf(stderr,
"Multiple base pubkeys specified\n");
return 1;
}
EC_KEY *pkey = vg_exec_context_new_key();
pubkey_base = EC_POINT_hex2point(
EC_KEY_get0_group(pkey),
optarg, NULL, NULL);
EC_KEY_free(pkey);
if (pubkey_base == NULL) {
fprintf(stderr,
"Invalid base pubkey\n");
return 1;
}
break;
}
case 'e':
prompt_password = 1;
break;
case 'E':
key_password = optarg;
break;
case 't':
nthreads = atoi(optarg);
if (nthreads == 0) {
fprintf(stderr,
"Invalid thread count '%s'\n", optarg);
return 1;
}
break;
case 'f':
if (npattfp >= MAX_FILE) {
fprintf(stderr,
"Too many input files specified\n");
return 1;
}
if (!strcmp(optarg, "-")) {
if (pattstdin) {
fprintf(stderr, "ERROR: stdin "
"specified multiple times\n");
return 1;
}
fp = stdin;
} else {
fp = fopen(optarg, "r");
if (!fp) {
fprintf(stderr,
"Could not open %s: %s\n",
optarg, strerror(errno));
return 1;
}
}
pattfp[npattfp] = fp;
pattfpi[npattfp] = caseinsensitive;
npattfp++;
break;
case 'o':
if (result_file) {
fprintf(stderr,
"Multiple output files specified\n");
return 1;
}
result_file = optarg;
break;
case 's':
if (seedfile != NULL) {
fprintf(stderr,
"Multiple RNG seeds specified\n");
return 1;
}
seedfile = optarg;
break;
default:
usage(argv[0]);
return 1;
}
}
#if OPENSSL_VERSION_NUMBER < 0x10000000L
/* Complain about older versions of OpenSSL */
if (verbose > 0) {
fprintf(stderr,
"WARNING: Built with " OPENSSL_VERSION_TEXT "\n"
"WARNING: Use OpenSSL 1.0.0d+ for best performance\n");
}
#endif
if (caseinsensitive && regex)
fprintf(stderr,
"WARNING: case insensitive mode incompatible with "
"regular expressions\n");
pubkeytype = addrtype;
if (format == VCF_SCRIPT)
{
if (scriptaddrtype == -1)
{
fprintf(stderr,
"Address type incompatible with script format\n");
return 1;
}
addrtype = scriptaddrtype;
}
if (seedfile) {
opt = -1;
#if !defined(_WIN32)
{ struct stat st;
if (!stat(seedfile, &st) &&
(st.st_mode & (S_IFBLK|S_IFCHR))) {
opt = 32;
} }
#endif
opt = RAND_load_file(seedfile, opt);
if (!opt) {
fprintf(stderr, "Could not load RNG seed %s\n", optarg);
return 1;
}
if (verbose > 0) {
fprintf(stderr,
"Read %d bytes from RNG seed file\n", opt);
}
}
if (regex) {
vcp = vg_regex_context_new(addrtype, privtype);
} else {
vcp = vg_prefix_context_new(addrtype, privtype,
caseinsensitive);
}
vcp->vc_compressed=compressed;
vcp->vc_verbose = verbose;
vcp->vc_result_file = result_file;
vcp->vc_remove_on_match = remove_on_match;
vcp->vc_only_one = only_one;
vcp->vc_format = format;
vcp->vc_pubkeytype = pubkeytype;
vcp->vc_pubkey_base = pubkey_base;
vcp->vc_output_match = vg_output_match_console;
vcp->vc_output_timing = vg_output_timing_console;
if (!npattfp) {
if (optind >= argc) {
usage(argv[0]);
return 1;
}
patterns = &argv[optind];
npatterns = argc - optind;
if (!vg_context_add_patterns(vcp,
(const char ** const) patterns,
npatterns))
return 1;
}
for (i = 0; i < npattfp; i++) {
fp = pattfp[i];
if (!vg_read_file(fp, &patterns, &npatterns)) {
fprintf(stderr, "Failed to load pattern file\n");
return 1;
}
if (fp != stdin)
fclose(fp);
if (!regex)
vg_prefix_context_set_case_insensitive(vcp, pattfpi[i]);
if (!vg_context_add_patterns(vcp,
(const char ** const) patterns,
npatterns))
return 1;
}
if (!vcp->vc_npatterns) {
fprintf(stderr, "No patterns to search\n");
return 1;
}
if (prompt_password) {
if (!vg_read_password(pwbuf, sizeof(pwbuf)))
return 1;
key_password = pwbuf;
}
vcp->vc_key_protect_pass = key_password;
if (key_password) {
if (!vg_check_password_complexity(key_password, verbose))
fprintf(stderr,
"WARNING: Protecting private keys with "
"weak password\n");
}
if ((verbose > 0) && regex && (vcp->vc_npatterns > 1))
fprintf(stderr,
"Regular expressions: %ld\n", vcp->vc_npatterns);
if (simulate)
return 0;
if (!start_threads(vcp, nthreads))
return 1;
return 0;
}
int cmd_grep(int argc, const char **argv, const char *prefix)
{
int hit = 0;
int cached = 0;
int seen_dashdash = 0;
int external_grep_allowed__ignored;
const char *show_in_pager = NULL, *default_pager = "dummy";
struct grep_opt opt;
struct object_array list = OBJECT_ARRAY_INIT;
const char **paths = NULL;
struct pathspec pathspec;
struct string_list path_list = STRING_LIST_INIT_NODUP;
int i;
int dummy;
int use_index = 1;
struct option options[] = {
OPT_BOOLEAN(0, "cached", &cached,
"search in index instead of in the work tree"),
OPT_BOOLEAN(0, "index", &use_index,
"--no-index finds in contents not managed by git"),
OPT_GROUP(""),
OPT_BOOLEAN('v', "invert-match", &opt.invert,
"show non-matching lines"),
OPT_BOOLEAN('i', "ignore-case", &opt.ignore_case,
"case insensitive matching"),
OPT_BOOLEAN('w', "word-regexp", &opt.word_regexp,
"match patterns only at word boundaries"),
OPT_SET_INT('a', "text", &opt.binary,
"process binary files as text", GREP_BINARY_TEXT),
OPT_SET_INT('I', NULL, &opt.binary,
"don't match patterns in binary files",
GREP_BINARY_NOMATCH),
{ OPTION_INTEGER, 0, "max-depth", &opt.max_depth, "depth",
"descend at most <depth> levels", PARSE_OPT_NONEG,
NULL, 1 },
OPT_GROUP(""),
OPT_BIT('E', "extended-regexp", &opt.regflags,
"use extended POSIX regular expressions", REG_EXTENDED),
OPT_NEGBIT('G', "basic-regexp", &opt.regflags,
"use basic POSIX regular expressions (default)",
REG_EXTENDED),
OPT_BOOLEAN('F', "fixed-strings", &opt.fixed,
"interpret patterns as fixed strings"),
OPT_GROUP(""),
OPT_BOOLEAN('n', "line-number", &opt.linenum, "show line numbers"),
OPT_NEGBIT('h', NULL, &opt.pathname, "don't show filenames", 1),
OPT_BIT('H', NULL, &opt.pathname, "show filenames", 1),
OPT_NEGBIT(0, "full-name", &opt.relative,
"show filenames relative to top directory", 1),
OPT_BOOLEAN('l', "files-with-matches", &opt.name_only,
"show only filenames instead of matching lines"),
OPT_BOOLEAN(0, "name-only", &opt.name_only,
"synonym for --files-with-matches"),
OPT_BOOLEAN('L', "files-without-match",
&opt.unmatch_name_only,
"show only the names of files without match"),
OPT_BOOLEAN('z', "null", &opt.null_following_name,
"print NUL after filenames"),
OPT_BOOLEAN('c', "count", &opt.count,
"show the number of matches instead of matching lines"),
OPT__COLOR(&opt.color, "highlight matches"),
OPT_GROUP(""),
OPT_CALLBACK('C', NULL, &opt, "n",
"show <n> context lines before and after matches",
context_callback),
OPT_INTEGER('B', NULL, &opt.pre_context,
"show <n> context lines before matches"),
OPT_INTEGER('A', NULL, &opt.post_context,
"show <n> context lines after matches"),
OPT_NUMBER_CALLBACK(&opt, "shortcut for -C NUM",
context_callback),
OPT_BOOLEAN('p', "show-function", &opt.funcname,
"show a line with the function name before matches"),
OPT_GROUP(""),
OPT_CALLBACK('f', NULL, &opt, "file",
"read patterns from file", file_callback),
{ OPTION_CALLBACK, 'e', NULL, &opt, "pattern",
"match <pattern>", PARSE_OPT_NONEG, pattern_callback },
{ OPTION_CALLBACK, 0, "and", &opt, NULL,
"combine patterns specified with -e",
PARSE_OPT_NOARG | PARSE_OPT_NONEG, and_callback },
OPT_BOOLEAN(0, "or", &dummy, ""),
{ OPTION_CALLBACK, 0, "not", &opt, NULL, "",
PARSE_OPT_NOARG | PARSE_OPT_NONEG, not_callback },
{ OPTION_CALLBACK, '(', NULL, &opt, NULL, "",
PARSE_OPT_NOARG | PARSE_OPT_NONEG | PARSE_OPT_NODASH,
open_callback },
{ OPTION_CALLBACK, ')', NULL, &opt, NULL, "",
PARSE_OPT_NOARG | PARSE_OPT_NONEG | PARSE_OPT_NODASH,
close_callback },
OPT__QUIET(&opt.status_only,
"indicate hit with exit status without output"),
OPT_BOOLEAN(0, "all-match", &opt.all_match,
"show only matches from files that match all patterns"),
OPT_GROUP(""),
{ OPTION_STRING, 'O', "open-files-in-pager", &show_in_pager,
"pager", "show matching files in the pager",
PARSE_OPT_OPTARG, NULL, (intptr_t)default_pager },
OPT_BOOLEAN(0, "ext-grep", &external_grep_allowed__ignored,
"allow calling of grep(1) (ignored by this build)"),
{ OPTION_CALLBACK, 0, "help-all", &options, NULL, "show usage",
PARSE_OPT_HIDDEN | PARSE_OPT_NOARG, help_callback },
OPT_END()
};
/*
* 'git grep -h', unlike 'git grep -h <pattern>', is a request
* to show usage information and exit.
*/
if (argc == 2 && !strcmp(argv[1], "-h"))
usage_with_options(grep_usage, options);
memset(&opt, 0, sizeof(opt));
opt.prefix = prefix;
opt.prefix_length = (prefix && *prefix) ? strlen(prefix) : 0;
opt.relative = 1;
opt.pathname = 1;
opt.pattern_tail = &opt.pattern_list;
opt.header_tail = &opt.header_list;
opt.regflags = REG_NEWLINE;
opt.max_depth = -1;
strcpy(opt.color_context, "");
strcpy(opt.color_filename, "");
strcpy(opt.color_function, "");
strcpy(opt.color_lineno, "");
strcpy(opt.color_match, GIT_COLOR_BOLD_RED);
strcpy(opt.color_selected, "");
strcpy(opt.color_sep, GIT_COLOR_CYAN);
opt.color = -1;
git_config(grep_config, &opt);
if (opt.color == -1)
opt.color = git_use_color_default;
/*
* If there is no -- then the paths must exist in the working
* tree. If there is no explicit pattern specified with -e or
* -f, we take the first unrecognized non option to be the
* pattern, but then what follows it must be zero or more
* valid refs up to the -- (if exists), and then existing
* paths. If there is an explicit pattern, then the first
* unrecognized non option is the beginning of the refs list
* that continues up to the -- (if exists), and then paths.
*/
argc = parse_options(argc, argv, prefix, options, grep_usage,
PARSE_OPT_KEEP_DASHDASH |
PARSE_OPT_STOP_AT_NON_OPTION |
PARSE_OPT_NO_INTERNAL_HELP);
if (use_index && !startup_info->have_repository)
/* die the same way as if we did it at the beginning */
setup_git_directory();
/*
* skip a -- separator; we know it cannot be
* separating revisions from pathnames if
* we haven't even had any patterns yet
*/
if (argc > 0 && !opt.pattern_list && !strcmp(argv[0], "--")) {
argv++;
argc--;
}
/* First unrecognized non-option token */
if (argc > 0 && !opt.pattern_list) {
append_grep_pattern(&opt, argv[0], "command line", 0,
GREP_PATTERN);
argv++;
argc--;
}
if (show_in_pager == default_pager)
show_in_pager = git_pager(1);
if (show_in_pager) {
opt.color = 0;
opt.name_only = 1;
opt.null_following_name = 1;
opt.output_priv = &path_list;
opt.output = append_path;
string_list_append(&path_list, show_in_pager);
use_threads = 0;
}
if (!opt.pattern_list)
die(_("no pattern given."));
if (!opt.fixed && opt.ignore_case)
opt.regflags |= REG_ICASE;
if ((opt.regflags != REG_NEWLINE) && opt.fixed)
die(_("cannot mix --fixed-strings and regexp"));
#ifndef NO_PTHREADS
if (online_cpus() == 1 || !grep_threads_ok(&opt))
use_threads = 0;
if (use_threads) {
if (opt.pre_context || opt.post_context)
print_hunk_marks_between_files = 1;
start_threads(&opt);
}
#else
use_threads = 0;
#endif
compile_grep_patterns(&opt);
/* Check revs and then paths */
for (i = 0; i < argc; i++) {
const char *arg = argv[i];
unsigned char sha1[20];
/* Is it a rev? */
if (!get_sha1(arg, sha1)) {
struct object *object = parse_object(sha1);
if (!object)
die(_("bad object %s"), arg);
add_object_array(object, arg, &list);
continue;
}
if (!strcmp(arg, "--")) {
i++;
seen_dashdash = 1;
}
break;
}
/* The rest are paths */
if (!seen_dashdash) {
int j;
for (j = i; j < argc; j++)
verify_filename(prefix, argv[j]);
}
if (i < argc)
paths = get_pathspec(prefix, argv + i);
else if (prefix) {
paths = xcalloc(2, sizeof(const char *));
paths[0] = prefix;
paths[1] = NULL;
}
init_pathspec(&pathspec, paths);
pathspec.max_depth = opt.max_depth;
pathspec.recursive = 1;
if (show_in_pager && (cached || list.nr))
die(_("--open-files-in-pager only works on the worktree"));
if (show_in_pager && opt.pattern_list && !opt.pattern_list->next) {
const char *pager = path_list.items[0].string;
int len = strlen(pager);
if (len > 4 && is_dir_sep(pager[len - 5]))
pager += len - 4;
if (!strcmp("less", pager) || !strcmp("vi", pager)) {
struct strbuf buf = STRBUF_INIT;
strbuf_addf(&buf, "+/%s%s",
strcmp("less", pager) ? "" : "*",
opt.pattern_list->pattern);
string_list_append(&path_list, buf.buf);
strbuf_detach(&buf, NULL);
}
}
if (!show_in_pager)
setup_pager();
if (!use_index) {
if (cached)
die(_("--cached cannot be used with --no-index."));
if (list.nr)
die(_("--no-index cannot be used with revs."));
hit = grep_directory(&opt, &pathspec);
} else if (!list.nr) {
if (!cached)
setup_work_tree();
hit = grep_cache(&opt, &pathspec, cached);
} else {
if (cached)
die(_("both --cached and trees are given."));
hit = grep_objects(&opt, &pathspec, &list);
}
if (use_threads)
hit |= wait_all();
if (hit && show_in_pager)
run_pager(&opt, prefix);
free_grep_patterns(&opt);
return !hit;
}
int main (
int argc,
char *argv[]
)
{
pwr_tStatus sts;
int event;
plc_sProcess *pp;
uid_t ruid;
struct passwd *pwd;
/*
struct rlimit rlim;
int i;
*/
/* Set core dump file size limit to infinite */
/*
rlim.rlim_cur = RLIM_INFINITY;
rlim.rlim_max = RLIM_INFINITY;
sts = setrlimit(RLIMIT_CORE, &rlim);
printf("%d\n", sts);
i = 1/0;
printf("%d\n", i);
*/
pp = init_process();
qcom_WaitAnd(&sts, &pp->eventQ, &qcom_cQini, ini_mEvent_newPlcInit, qcom_cTmoEternal);
init_plc(pp);
create_threads(pp);
init_threads(pp);
/* Once threads has set their priority don't run as root */
#if 0
ruid = getuid();
if (ruid == 0) {
pwd = getpwnam("pwrp");
if (pwd != NULL) {
setreuid(pwd->pw_uid, pwd->pw_uid);
}
}
else
setreuid(ruid, ruid);
#endif
qcom_SignalOr(&sts, &qcom_cQini, ini_mEvent_newPlcInitDone);
qcom_WaitAnd(&sts, &pp->eventQ, &qcom_cQini, ini_mEvent_newPlcStart, qcom_cTmoEternal);
// proc_SetPriority(pp->PlcProcess->Prio);
set_values(pp);
start_threads(pp);
run_threads(pp);
time_Uptime(&sts, &pp->PlcProcess->StartTime, NULL);
qcom_SignalOr(&sts, &qcom_cQini, ini_mEvent_newPlcStartDone);
#if 0
/* Force the backup to take care initialized backup objects. */
bck_ForceBackup(NULL);
#endif
errh_SetStatus( PWR__SRUN);
qcom_WaitOr(&sts, &pp->eventQ, &qcom_cQini, ini_mEvent_terminate | ini_mEvent_oldPlcStop, qcom_cTmoEternal, &event);
switch ( event) {
case ini_mEvent_terminate:
errh_SetStatus( PWR__SRVTERM);
stop_threads(pp);
clean_all(pp);
nmps_delete_lock( &sts);
break;
case ini_mEvent_oldPlcStop:
errh_SetStatus( PWR__SRVTERM);
time_Uptime(&sts, &pp->PlcProcess->StopTime, NULL);
stop_threads(pp);
save_values(pp);
qcom_SignalOr(&sts, &qcom_cQini, ini_mEvent_oldPlcStopDone);
#if defined OS_ELN
sts = proc_SetPriority(31);
#endif
clean_all(pp);
break;
default: ;
}
exit(0);
}
int
main(int argc, char **argv)
{
tdata_t *mstrtd, *savetd;
char *uniqfile = NULL, *uniqlabel = NULL;
char *withfile = NULL;
char *label = NULL;
char **ifiles, **tifiles;
int verbose = 0, docopy = 0;
int write_fuzzy_match = 0;
int require_ctf = 0;
int nifiles, nielems;
int c, i, idx, tidx, err;
progname = basename(argv[0]);
if (getenv("CTFMERGE_DEBUG_LEVEL"))
debug_level = atoi(getenv("CTFMERGE_DEBUG_LEVEL"));
err = 0;
while ((c = getopt(argc, argv, ":cd:D:fl:L:o:tvw:s")) != EOF) {
switch (c) {
case 'c':
docopy = 1;
break;
case 'd':
/* Uniquify against `uniqfile' */
uniqfile = optarg;
break;
case 'D':
/* Uniquify against label `uniqlabel' in `uniqfile' */
uniqlabel = optarg;
break;
case 'f':
write_fuzzy_match = CTF_FUZZY_MATCH;
break;
case 'l':
/* Label merged types with `label' */
label = optarg;
break;
case 'L':
/* Label merged types with getenv(`label`) */
if ((label = getenv(optarg)) == NULL)
label = CTF_DEFAULT_LABEL;
break;
case 'o':
/* Place merged types in CTF section in `outfile' */
outfile = optarg;
break;
case 't':
/* Insist *all* object files built from C have CTF */
require_ctf = 1;
break;
case 'v':
/* More debugging information */
verbose = 1;
break;
case 'w':
/* Additive merge with data from `withfile' */
withfile = optarg;
break;
case 's':
/* use the dynsym rather than the symtab */
dynsym = CTF_USE_DYNSYM;
break;
default:
usage();
exit(2);
}
}
/* Validate arguments */
if (docopy) {
if (uniqfile != NULL || uniqlabel != NULL || label != NULL ||
outfile != NULL || withfile != NULL || dynsym != 0)
err++;
if (argc - optind != 2)
err++;
} else {
if (uniqfile != NULL && withfile != NULL)
err++;
if (uniqlabel != NULL && uniqfile == NULL)
err++;
if (outfile == NULL || label == NULL)
err++;
if (argc - optind == 0)
err++;
}
if (err) {
usage();
exit(2);
}
if (uniqfile && access(uniqfile, R_OK) != 0) {
warning("Uniquification file %s couldn't be opened and "
"will be ignored.\n", uniqfile);
uniqfile = NULL;
}
if (withfile && access(withfile, R_OK) != 0) {
warning("With file %s couldn't be opened and will be "
"ignored.\n", withfile);
withfile = NULL;
}
if (outfile && access(outfile, R_OK|W_OK) != 0)
terminate("Cannot open output file %s for r/w", outfile);
/*
* This is ugly, but we don't want to have to have a separate tool
* (yet) just for copying an ELF section with our specific requirements,
* so we shoe-horn a copier into ctfmerge.
*/
if (docopy) {
copy_ctf_data(argv[optind], argv[optind + 1]);
exit(0);
}
set_terminate_cleanup(terminate_cleanup);
/* Sort the input files and strip out duplicates */
nifiles = argc - optind;
ifiles = xmalloc(sizeof (char *) * nifiles);
tifiles = xmalloc(sizeof (char *) * nifiles);
for (i = 0; i < nifiles; i++)
tifiles[i] = argv[optind + i];
qsort(tifiles, nifiles, sizeof (char *), (int (*)())strcompare);
ifiles[0] = tifiles[0];
for (idx = 0, tidx = 1; tidx < nifiles; tidx++) {
if (strcmp(ifiles[idx], tifiles[tidx]) != 0)
ifiles[++idx] = tifiles[tidx];
}
nifiles = idx + 1;
/* Make sure they all exist */
if ((nielems = count_files(ifiles, nifiles)) < 0)
terminate("Some input files were inaccessible\n");
/* Prepare for the merge */
wq_init(&wq, nielems);
start_threads(&wq);
/*
* Start the merge
*
* We're reading everything from each of the object files, so we
* don't need to specify labels.
*/
if (read_ctf(ifiles, nifiles, NULL, merge_ctf_cb,
&wq, require_ctf) == 0) {
/*
* If we're verifying that C files have CTF, it's safe to
* assume that in this case, we're building only from assembly
* inputs.
*/
if (require_ctf)
exit(0);
terminate("No ctf sections found to merge\n");
}
pthread_mutex_lock(&wq.wq_queue_lock);
wq.wq_nomorefiles = 1;
pthread_cond_broadcast(&wq.wq_work_avail);
pthread_mutex_unlock(&wq.wq_queue_lock);
pthread_mutex_lock(&wq.wq_queue_lock);
while (wq.wq_alldone == 0)
pthread_cond_wait(&wq.wq_alldone_cv, &wq.wq_queue_lock);
pthread_mutex_unlock(&wq.wq_queue_lock);
join_threads(&wq);
/*
* All requested files have been merged, with the resulting tree in
* mstrtd. savetd is the tree that will be placed into the output file.
*
* Regardless of whether we're doing a normal uniquification or an
* additive merge, we need a type tree that has been uniquified
* against uniqfile or withfile, as appropriate.
*
* If we're doing a uniquification, we stuff the resulting tree into
* outfile. Otherwise, we add the tree to the tree already in withfile.
*/
assert(fifo_len(wq.wq_queue) == 1);
mstrtd = fifo_remove(wq.wq_queue);
if (verbose || debug_level) {
debug(2, "Statistics for td %p\n", (void *)mstrtd);
iidesc_stats(mstrtd->td_iihash);
}
if (uniqfile != NULL || withfile != NULL) {
char *reffile, *reflabel = NULL;
tdata_t *reftd;
if (uniqfile != NULL) {
reffile = uniqfile;
reflabel = uniqlabel;
} else
reffile = withfile;
if (read_ctf(&reffile, 1, reflabel, read_ctf_save_cb,
&reftd, require_ctf) == 0) {
terminate("No CTF data found in reference file %s\n",
reffile);
}
savetd = tdata_new();
if (CTF_TYPE_ISCHILD(reftd->td_nextid))
terminate("No room for additional types in master\n");
savetd->td_nextid = withfile ? reftd->td_nextid :
CTF_INDEX_TO_TYPE(1, TRUE);
merge_into_master(mstrtd, reftd, savetd, 0);
tdata_label_add(savetd, label, CTF_LABEL_LASTIDX);
if (withfile) {
/*
* savetd holds the new data to be added to the withfile
*/
tdata_t *withtd = reftd;
tdata_merge(withtd, savetd);
savetd = withtd;
} else {
char uniqname[MAXPATHLEN];
labelent_t *parle;
parle = tdata_label_top(reftd);
savetd->td_parlabel = xstrdup(parle->le_name);
strncpy(uniqname, reffile, sizeof (uniqname));
uniqname[MAXPATHLEN - 1] = '\0';
savetd->td_parname = xstrdup(basename(uniqname));
}
} else {
/*
* No post processing. Write the merged tree as-is into the
* output file.
*/
tdata_label_free(mstrtd);
tdata_label_add(mstrtd, label, CTF_LABEL_LASTIDX);
savetd = mstrtd;
}
tmpname = mktmpname(outfile, ".ctf");
write_ctf(savetd, outfile, tmpname,
CTF_COMPRESS | write_fuzzy_match | dynsym);
if (rename(tmpname, outfile) != 0)
terminate("Couldn't rename output temp file %s", tmpname);
free(tmpname);
return (0);
}
int cmd_grep(int argc, const char **argv, const char *prefix)
{
int hit = 0;
int cached = 0, untracked = 0, opt_exclude = -1;
int seen_dashdash = 0;
int external_grep_allowed__ignored;
const char *show_in_pager = NULL, *default_pager = "dummy";
struct grep_opt opt;
struct object_array list = OBJECT_ARRAY_INIT;
struct pathspec pathspec;
struct string_list path_list = STRING_LIST_INIT_NODUP;
int i;
int dummy;
int use_index = 1;
int pattern_type_arg = GREP_PATTERN_TYPE_UNSPECIFIED;
int allow_revs;
struct option options[] = {
OPT_BOOL(0, "cached", &cached,
N_("search in index instead of in the work tree")),
OPT_NEGBIT(0, "no-index", &use_index,
N_("find in contents not managed by git"), 1),
OPT_BOOL(0, "untracked", &untracked,
N_("search in both tracked and untracked files")),
OPT_SET_INT(0, "exclude-standard", &opt_exclude,
N_("ignore files specified via '.gitignore'"), 1),
OPT_BOOL(0, "recurse-submodules", &recurse_submodules,
N_("recursively search in each submodule")),
OPT_GROUP(""),
OPT_BOOL('v', "invert-match", &opt.invert,
N_("show non-matching lines")),
OPT_BOOL('i', "ignore-case", &opt.ignore_case,
N_("case insensitive matching")),
OPT_BOOL('w', "word-regexp", &opt.word_regexp,
N_("match patterns only at word boundaries")),
OPT_SET_INT('a', "text", &opt.binary,
N_("process binary files as text"), GREP_BINARY_TEXT),
OPT_SET_INT('I', NULL, &opt.binary,
N_("don't match patterns in binary files"),
GREP_BINARY_NOMATCH),
OPT_BOOL(0, "textconv", &opt.allow_textconv,
N_("process binary files with textconv filters")),
{ OPTION_INTEGER, 0, "max-depth", &opt.max_depth, N_("depth"),
N_("descend at most <depth> levels"), PARSE_OPT_NONEG,
NULL, 1 },
OPT_GROUP(""),
OPT_SET_INT('E', "extended-regexp", &pattern_type_arg,
N_("use extended POSIX regular expressions"),
GREP_PATTERN_TYPE_ERE),
OPT_SET_INT('G', "basic-regexp", &pattern_type_arg,
N_("use basic POSIX regular expressions (default)"),
GREP_PATTERN_TYPE_BRE),
OPT_SET_INT('F', "fixed-strings", &pattern_type_arg,
N_("interpret patterns as fixed strings"),
GREP_PATTERN_TYPE_FIXED),
OPT_SET_INT('P', "perl-regexp", &pattern_type_arg,
N_("use Perl-compatible regular expressions"),
GREP_PATTERN_TYPE_PCRE),
OPT_GROUP(""),
OPT_BOOL('n', "line-number", &opt.linenum, N_("show line numbers")),
OPT_BOOL(0, "column", &opt.columnnum, N_("show column number of first match")),
OPT_NEGBIT('h', NULL, &opt.pathname, N_("don't show filenames"), 1),
OPT_BIT('H', NULL, &opt.pathname, N_("show filenames"), 1),
OPT_NEGBIT(0, "full-name", &opt.relative,
N_("show filenames relative to top directory"), 1),
OPT_BOOL('l', "files-with-matches", &opt.name_only,
N_("show only filenames instead of matching lines")),
OPT_BOOL(0, "name-only", &opt.name_only,
N_("synonym for --files-with-matches")),
OPT_BOOL('L', "files-without-match",
&opt.unmatch_name_only,
N_("show only the names of files without match")),
OPT_BOOL_F('z', "null", &opt.null_following_name,
N_("print NUL after filenames"),
PARSE_OPT_NOCOMPLETE),
OPT_BOOL('o', "only-matching", &opt.only_matching,
N_("show only matching parts of a line")),
OPT_BOOL('c', "count", &opt.count,
N_("show the number of matches instead of matching lines")),
OPT__COLOR(&opt.color, N_("highlight matches")),
OPT_BOOL(0, "break", &opt.file_break,
N_("print empty line between matches from different files")),
OPT_BOOL(0, "heading", &opt.heading,
N_("show filename only once above matches from same file")),
OPT_GROUP(""),
OPT_CALLBACK('C', "context", &opt, N_("n"),
N_("show <n> context lines before and after matches"),
context_callback),
OPT_INTEGER('B', "before-context", &opt.pre_context,
N_("show <n> context lines before matches")),
OPT_INTEGER('A', "after-context", &opt.post_context,
N_("show <n> context lines after matches")),
OPT_INTEGER(0, "threads", &num_threads,
N_("use <n> worker threads")),
OPT_NUMBER_CALLBACK(&opt, N_("shortcut for -C NUM"),
context_callback),
OPT_BOOL('p', "show-function", &opt.funcname,
N_("show a line with the function name before matches")),
OPT_BOOL('W', "function-context", &opt.funcbody,
N_("show the surrounding function")),
OPT_GROUP(""),
OPT_CALLBACK('f', NULL, &opt, N_("file"),
N_("read patterns from file"), file_callback),
{ OPTION_CALLBACK, 'e', NULL, &opt, N_("pattern"),
N_("match <pattern>"), PARSE_OPT_NONEG, pattern_callback },
{ OPTION_CALLBACK, 0, "and", &opt, NULL,
N_("combine patterns specified with -e"),
PARSE_OPT_NOARG | PARSE_OPT_NONEG, and_callback },
OPT_BOOL(0, "or", &dummy, ""),
{ OPTION_CALLBACK, 0, "not", &opt, NULL, "",
PARSE_OPT_NOARG | PARSE_OPT_NONEG, not_callback },
{ OPTION_CALLBACK, '(', NULL, &opt, NULL, "",
PARSE_OPT_NOARG | PARSE_OPT_NONEG | PARSE_OPT_NODASH,
open_callback },
{ OPTION_CALLBACK, ')', NULL, &opt, NULL, "",
PARSE_OPT_NOARG | PARSE_OPT_NONEG | PARSE_OPT_NODASH,
close_callback },
OPT__QUIET(&opt.status_only,
N_("indicate hit with exit status without output")),
OPT_BOOL(0, "all-match", &opt.all_match,
N_("show only matches from files that match all patterns")),
OPT_SET_INT_F(0, "debug", &opt.debug,
N_("show parse tree for grep expression"),
1, PARSE_OPT_HIDDEN),
OPT_GROUP(""),
{ OPTION_STRING, 'O', "open-files-in-pager", &show_in_pager,
N_("pager"), N_("show matching files in the pager"),
PARSE_OPT_OPTARG | PARSE_OPT_NOCOMPLETE,
NULL, (intptr_t)default_pager },
OPT_BOOL_F(0, "ext-grep", &external_grep_allowed__ignored,
N_("allow calling of grep(1) (ignored by this build)"),
PARSE_OPT_NOCOMPLETE),
OPT_END()
};
init_grep_defaults();
git_config(grep_cmd_config, NULL);
grep_init(&opt, prefix);
/*
* If there is no -- then the paths must exist in the working
* tree. If there is no explicit pattern specified with -e or
* -f, we take the first unrecognized non option to be the
* pattern, but then what follows it must be zero or more
* valid refs up to the -- (if exists), and then existing
* paths. If there is an explicit pattern, then the first
* unrecognized non option is the beginning of the refs list
* that continues up to the -- (if exists), and then paths.
*/
argc = parse_options(argc, argv, prefix, options, grep_usage,
PARSE_OPT_KEEP_DASHDASH |
PARSE_OPT_STOP_AT_NON_OPTION);
grep_commit_pattern_type(pattern_type_arg, &opt);
if (use_index && !startup_info->have_repository) {
int fallback = 0;
git_config_get_bool("grep.fallbacktonoindex", &fallback);
if (fallback)
use_index = 0;
else
/* die the same way as if we did it at the beginning */
setup_git_directory();
}
/*
* skip a -- separator; we know it cannot be
* separating revisions from pathnames if
* we haven't even had any patterns yet
*/
if (argc > 0 && !opt.pattern_list && !strcmp(argv[0], "--")) {
argv++;
argc--;
}
/* First unrecognized non-option token */
if (argc > 0 && !opt.pattern_list) {
append_grep_pattern(&opt, argv[0], "command line", 0,
GREP_PATTERN);
argv++;
argc--;
}
if (show_in_pager == default_pager)
show_in_pager = git_pager(1);
if (show_in_pager) {
opt.color = 0;
opt.name_only = 1;
opt.null_following_name = 1;
opt.output_priv = &path_list;
opt.output = append_path;
string_list_append(&path_list, show_in_pager);
}
if (!opt.pattern_list)
die(_("no pattern given"));
/* --only-matching has no effect with --invert. */
if (opt.invert)
opt.only_matching = 0;
/*
* We have to find "--" in a separate pass, because its presence
* influences how we will parse arguments that come before it.
*/
for (i = 0; i < argc; i++) {
if (!strcmp(argv[i], "--")) {
seen_dashdash = 1;
break;
}
}
/*
* Resolve any rev arguments. If we have a dashdash, then everything up
* to it must resolve as a rev. If not, then we stop at the first
* non-rev and assume everything else is a path.
*/
allow_revs = use_index && !untracked;
for (i = 0; i < argc; i++) {
const char *arg = argv[i];
struct object_id oid;
struct object_context oc;
struct object *object;
if (!strcmp(arg, "--")) {
i++;
break;
}
if (!allow_revs) {
if (seen_dashdash)
die(_("--no-index or --untracked cannot be used with revs"));
break;
}
if (get_oid_with_context(arg, GET_OID_RECORD_PATH,
&oid, &oc)) {
if (seen_dashdash)
die(_("unable to resolve revision: %s"), arg);
break;
}
object = parse_object_or_die(&oid, arg);
if (!seen_dashdash)
verify_non_filename(prefix, arg);
add_object_array_with_path(object, arg, &list, oc.mode, oc.path);
free(oc.path);
}
/*
* Anything left over is presumed to be a path. But in the non-dashdash
* "do what I mean" case, we verify and complain when that isn't true.
*/
if (!seen_dashdash) {
int j;
for (j = i; j < argc; j++)
verify_filename(prefix, argv[j], j == i && allow_revs);
}
parse_pathspec(&pathspec, 0,
PATHSPEC_PREFER_CWD |
(opt.max_depth != -1 ? PATHSPEC_MAXDEPTH_VALID : 0),
prefix, argv + i);
pathspec.max_depth = opt.max_depth;
pathspec.recursive = 1;
pathspec.recurse_submodules = !!recurse_submodules;
#ifndef NO_PTHREADS
if (list.nr || cached || show_in_pager)
num_threads = 0;
else if (num_threads == 0)
num_threads = GREP_NUM_THREADS_DEFAULT;
else if (num_threads < 0)
die(_("invalid number of threads specified (%d)"), num_threads);
if (num_threads == 1)
num_threads = 0;
#else
if (num_threads)
warning(_("no threads support, ignoring --threads"));
num_threads = 0;
#endif
if (!num_threads)
/*
* The compiled patterns on the main path are only
* used when not using threading. Otherwise
* start_threads() below calls compile_grep_patterns()
* for each thread.
*/
compile_grep_patterns(&opt);
#ifndef NO_PTHREADS
if (num_threads) {
if (!(opt.name_only || opt.unmatch_name_only || opt.count)
&& (opt.pre_context || opt.post_context ||
opt.file_break || opt.funcbody))
skip_first_line = 1;
start_threads(&opt);
}
#endif
if (show_in_pager && (cached || list.nr))
die(_("--open-files-in-pager only works on the worktree"));
if (show_in_pager && opt.pattern_list && !opt.pattern_list->next) {
const char *pager = path_list.items[0].string;
int len = strlen(pager);
if (len > 4 && is_dir_sep(pager[len - 5]))
pager += len - 4;
if (opt.ignore_case && !strcmp("less", pager))
string_list_append(&path_list, "-I");
if (!strcmp("less", pager) || !strcmp("vi", pager)) {
struct strbuf buf = STRBUF_INIT;
strbuf_addf(&buf, "+/%s%s",
strcmp("less", pager) ? "" : "*",
opt.pattern_list->pattern);
string_list_append(&path_list, buf.buf);
strbuf_detach(&buf, NULL);
}
}
if (recurse_submodules && (!use_index || untracked))
die(_("option not supported with --recurse-submodules"));
if (!show_in_pager && !opt.status_only)
setup_pager();
if (!use_index && (untracked || cached))
die(_("--cached or --untracked cannot be used with --no-index"));
if (!use_index || untracked) {
int use_exclude = (opt_exclude < 0) ? use_index : !!opt_exclude;
hit = grep_directory(&opt, &pathspec, use_exclude, use_index);
} else if (0 <= opt_exclude) {
die(_("--[no-]exclude-standard cannot be used for tracked contents"));
} else if (!list.nr) {
if (!cached)
setup_work_tree();
hit = grep_cache(&opt, the_repository, &pathspec, cached);
} else {
if (cached)
die(_("both --cached and trees are given"));
hit = grep_objects(&opt, &pathspec, &list);
}
if (num_threads)
hit |= wait_all();
if (hit && show_in_pager)
run_pager(&opt, prefix);
clear_pathspec(&pathspec);
free_grep_patterns(&opt);
return !hit;
}
INT_PTR CALLBACK DlgProcOpts(HWND hwndDlg, UINT msg, WPARAM wParam, LPARAM lParam)
{
switch (msg) {
case WM_INITDIALOG:
TranslateDialogDefault(hwndDlg);
if (g_settings.local_only) {
CheckDlgButton(hwndDlg, NA_LOCAL_CHECK, BST_CHECKED);
}
if (g_settings.log_to_file) {
CheckDlgButton(hwndDlg, NA_LOG_CHECK, BST_CHECKED);
EnableWindow(GetDlgItem(hwndDlg, NA_DEBUG_MSG_CHECK), TRUE);
}
if (g_settings.debug_messages) {
CheckDlgButton(hwndDlg, NA_DEBUG_MSG_CHECK, BST_CHECKED);
}
if (g_settings.use_pcspeaker) {
CheckDlgButton(hwndDlg, NA_PCSPEAKER_CHECK, BST_CHECKED);
}
if (g_settings.allow_execute) {
CheckDlgButton(hwndDlg, NA_ALLOW_EXECUTE, BST_CHECKED);
}
{
TCHAR buf[10];
SetDlgItemText(hwndDlg, NA_LOG_FILENAME, g_settings.log_filename.c_str());
SetDlgItemText(hwndDlg, NA_PORT, _itot(g_settings.port, buf, 10));
SetDlgItemText(hwndDlg, NA_PASSWORD, g_settings.password.c_str());
UINT state;
switch (g_settings.sound) {
case g_settings.always:
state = BST_CHECKED;
break;
case g_settings.never:
state = BST_UNCHECKED;
break;
case g_settings.request:
default:
state = BST_INDETERMINATE;
break;
}
CheckDlgButton(hwndDlg, NA_SOUND_CHECK, state ? BST_CHECKED : BST_UNCHECKED);
}
return TRUE;
case WM_COMMAND:
switch (LOWORD(wParam)) {
case NA_SOUND_CHECK:
case NA_PCSPEAKER_CHECK:
case NA_LOCAL_CHECK:
case NA_DEBUG_MSG_CHECK:
case NA_LOG_CHECK:
case NA_PORT:
case NA_PASSWORD:
case NA_LOG_FILENAME:
SendMessage(GetParent(hwndDlg), PSM_CHANGED, 0, 0);
case NA_LOG_BROWSE:
if (HIWORD(wParam) == BN_CLICKED) {
TCHAR szTemp[MAX_PATH + 1], szTemp1[MAX_PATH + 1], szProfileDir[MAX_PATH + 1];
GetDlgItemText(hwndDlg, NA_LOG_FILENAME, szTemp, _countof(szTemp));
OPENFILENAME ofn = { 0 };
ofn.lStructSize = sizeof(ofn);
ofn.lpstrFile = szTemp;
ofn.nMaxFile = MAX_PATH;
ofn.hwndOwner = hwndDlg;
ofn.lpstrFilter = TranslateT("Log (*.log)\0*.log\0Text (*.txt)\0*.txt\0All Files (*.*)\0*.*\0");
ofn.nFilterIndex = 1;
// Use profile directory as default, if path is not specified
CallService(MS_DB_GETPROFILEPATHT, (WPARAM)MAX_PATH, (LPARAM)szProfileDir);
ofn.lpstrInitialDir = szProfileDir;
ofn.Flags = OFN_PATHMUSTEXIST | OFN_HIDEREADONLY;
ofn.lpstrDefExt = _T("log");
if (GetOpenFileName(&ofn)) {
PathToRelativeT(szTemp, szTemp1);
SetDlgItemText(hwndDlg, NA_LOG_FILENAME, szTemp1);
SendMessage(GetParent(hwndDlg), PSM_CHANGED, (WPARAM)hwndDlg, 0);
}
return 0;
}
}
break;
case WM_NOTIFY:
if (((LPNMHDR)lParam)->idFrom != 0)
break;
switch (((LPNMHDR)lParam)->code) {
case PSN_RESET:
return TRUE;
case PSN_APPLY: {
UINT state = IsDlgButtonChecked(hwndDlg, NA_SOUND_CHECK);
NASettings s;
switch (state) {
case BST_CHECKED:
s.sound = s.always;
break;
case BST_INDETERMINATE:
s.sound = s.request;
break;
case BST_UNCHECKED:
default:
s.sound = s.never;
break;
}
s.local_only = IsDlgButtonChecked(hwndDlg, NA_LOCAL_CHECK) != BST_UNCHECKED;
s.debug_messages = IsDlgButtonChecked(hwndDlg, NA_DEBUG_MSG_CHECK) != BST_UNCHECKED;
s.log_to_file = IsDlgButtonChecked(hwndDlg, NA_LOG_CHECK) != BST_UNCHECKED;
s.use_pcspeaker = IsDlgButtonChecked(hwndDlg, NA_PCSPEAKER_CHECK) != BST_UNCHECKED;
s.allow_execute = IsDlgButtonChecked(hwndDlg, NA_ALLOW_EXECUTE) != BST_UNCHECKED;
TCHAR buf[1000];
if (!GetDlgItemText(hwndDlg, NA_PORT, buf, _countof(buf)))
buf[0] = '\0';
int port = _ttoi(buf);
if (port <= 0 || port > 65535)
MessageBox(0, TranslateT("Invalid port number"), TranslateT("NotifyAnything"), MB_ICONWARNING | MB_OK);
else
s.port = port;
if (!GetDlgItemText(hwndDlg, NA_PASSWORD, buf, _countof(buf)))
buf[0] = '\0';
s.password = buf;
g_settings = s;
save_settings();
stop_threads();
start_threads();
return TRUE;
}
}
break;
}
return FALSE;
}
void Console::after_exec(STATE) {
setup_files(state);
start_threads(state);
}
void Console::after_fork_parent(STATE) {
start_threads(state);
}
int
main (int argc, char *argv[])
{
setlocale (LC_ALL, "");
bindtextdomain (PACKAGE, LOCALEBASEDIR);
textdomain (PACKAGE);
enum { HELP_OPTION = CHAR_MAX + 1 };
static const char *options = "a:c:d:P:qvVx";
static const struct option long_options[] = {
{ "add", 1, 0, 'a' },
{ "connect", 1, 0, 'c' },
{ "domain", 1, 0, 'd' },
{ "format", 2, 0, 0 },
{ "help", 0, 0, HELP_OPTION },
{ "long-options", 0, 0, 0 },
{ "quiet", 0, 0, 'q' },
{ "uuid", 0, 0, 0, },
{ "verbose", 0, 0, 'v' },
{ "version", 0, 0, 'V' },
{ 0, 0, 0, 0 }
};
struct drv *drvs = NULL;
const char *format = NULL;
bool format_consumed = true;
int c;
int option_index;
int exit_code;
size_t max_threads = 0;
int r;
g = guestfs_create ();
if (g == NULL) {
fprintf (stderr, _("guestfs_create: failed to create handle\n"));
exit (EXIT_FAILURE);
}
for (;;) {
c = getopt_long (argc, argv, options, long_options, &option_index);
if (c == -1) break;
switch (c) {
case 0: /* options which are long only */
if (STREQ (long_options[option_index].name, "long-options"))
display_long_options (long_options);
else if (STREQ (long_options[option_index].name, "format")) {
OPTION_format;
} else if (STREQ (long_options[option_index].name, "uuid")) {
uuid = 1;
} else {
fprintf (stderr, _("%s: unknown long option: %s (%d)\n"),
program_name, long_options[option_index].name, option_index);
exit (EXIT_FAILURE);
}
break;
case 'a':
OPTION_a;
break;
case 'c':
OPTION_c;
break;
case 'd':
OPTION_d;
break;
case 'P':
if (sscanf (optarg, "%zu", &max_threads) != 1) {
fprintf (stderr, _("%s: -P option is not numeric\n"), program_name);
exit (EXIT_FAILURE);
}
break;
case 'q':
quiet = 1;
break;
case 'v':
OPTION_v;
break;
case 'V':
OPTION_V;
break;
case 'x':
OPTION_x;
break;
case HELP_OPTION:
usage (EXIT_SUCCESS);
default:
usage (EXIT_FAILURE);
}
}
/* These are really constants, but they have to be variables for the
* options parsing code. Assert here that they have known-good
* values.
*/
assert (read_only == 1);
assert (inspector == 0);
assert (live == 0);
/* Must be no extra arguments on the command line. */
if (optind != argc)
usage (EXIT_FAILURE);
CHECK_OPTION_format_consumed;
/* virt-alignment-scan has two modes. If the user didn't specify
* any drives, then we do the scan on every libvirt guest. That's
* the if-clause below. If the user specified domains/drives, then
* we assume they belong to a single guest. That's the else-clause
* below.
*/
if (drvs == NULL) {
#if defined(HAVE_LIBVIRT)
get_all_libvirt_domains (libvirt_uri);
r = start_threads (max_threads, g, scan_work);
free_domains ();
if (r == -1)
exit (EXIT_FAILURE);
#else
fprintf (stderr, _("%s: compiled without support for libvirt.\n"),
program_name);
exit (EXIT_FAILURE);
#endif
} else { /* Single guest. */
if (uuid) {
fprintf (stderr, _("%s: --uuid option cannot be used with -a or -d\n"),
program_name);
exit (EXIT_FAILURE);
}
/* Add domains/drives from the command line (for a single guest). */
add_drives (drvs, 'a');
if (guestfs_launch (g) == -1)
exit (EXIT_FAILURE);
/* Free up data structures, no longer needed after this point. */
free_drives (drvs);
/* Perform the scan. */
r = scan (g, NULL, stdout);
guestfs_close (g);
if (r == -1)
exit (EXIT_FAILURE);
}
/* Decide on an appropriate exit code. */
if (worst_alignment < 10) /* 2^10 = 4096 */
exit_code = 3;
else if (worst_alignment < 16) /* 2^16 = 65536 */
exit_code = 2;
else
exit_code = 0;
exit (exit_code);
}
void Console::start(STATE) {
initialize(state);
setup_files(state);
start_threads(state);
}
int
main(int arc, char **argv)
{
int i;
struct glob_arg g;
int ch;
int wait_link = 2;
int devqueues = 1; /* how many device queues */
bzero(&g, sizeof(g));
g.main_fd = -1;
g.td_body = receiver_body;
g.report_interval = 1000; /* report interval */
g.affinity = -1;
/* ip addresses can also be a range x.x.x.x-x.x.x.y */
g.src_ip.name = "10.0.0.1";
g.dst_ip.name = "10.1.0.1";
g.dst_mac.name = "ff:ff:ff:ff:ff:ff";
g.src_mac.name = NULL;
g.pkt_size = 60;
g.burst = 512; // default
g.nthreads = 1;
g.cpus = 1;
g.forever = 1;
g.tx_rate = 0;
g.frags = 1;
g.nmr_config = "";
g.virt_header = 0;
while ( (ch = getopt(arc, argv,
"a:f:F:n:i:Il:d:s:D:S:b:c:o:p:T:w:WvR:XC:H:e:m:")) != -1) {
struct sf *fn;
switch(ch) {
default:
D("bad option %c %s", ch, optarg);
usage();
break;
case 'n':
g.npackets = atoi(optarg);
break;
case 'F':
i = atoi(optarg);
if (i < 1 || i > 63) {
D("invalid frags %d [1..63], ignore", i);
break;
}
g.frags = i;
break;
case 'f':
for (fn = func; fn->key; fn++) {
if (!strcmp(fn->key, optarg))
break;
}
if (fn->key)
g.td_body = fn->f;
else
D("unrecognised function %s", optarg);
break;
case 'o': /* data generation options */
g.options = atoi(optarg);
break;
case 'a': /* force affinity */
g.affinity = atoi(optarg);
break;
case 'i': /* interface */
/* a prefix of tap: netmap: or pcap: forces the mode.
* otherwise we guess
*/
D("interface is %s", optarg);
if (strlen(optarg) > MAX_IFNAMELEN - 8) {
D("ifname too long %s", optarg);
break;
}
strcpy(g.ifname, optarg);
if (!strcmp(optarg, "null")) {
g.dev_type = DEV_NETMAP;
g.dummy_send = 1;
} else if (!strncmp(optarg, "tap:", 4)) {
g.dev_type = DEV_TAP;
strcpy(g.ifname, optarg + 4);
} else if (!strncmp(optarg, "pcap:", 5)) {
g.dev_type = DEV_PCAP;
strcpy(g.ifname, optarg + 5);
} else if (!strncmp(optarg, "netmap:", 7) ||
!strncmp(optarg, "vale", 4)) {
g.dev_type = DEV_NETMAP;
} else if (!strncmp(optarg, "tap", 3)) {
g.dev_type = DEV_TAP;
} else { /* prepend netmap: */
g.dev_type = DEV_NETMAP;
sprintf(g.ifname, "netmap:%s", optarg);
}
break;
case 'I':
g.options |= OPT_INDIRECT; /* XXX use indirect buffer */
break;
case 'l': /* pkt_size */
g.pkt_size = atoi(optarg);
break;
case 'd':
g.dst_ip.name = optarg;
break;
case 's':
g.src_ip.name = optarg;
break;
case 'T': /* report interval */
g.report_interval = atoi(optarg);
break;
case 'w':
wait_link = atoi(optarg);
break;
case 'W': /* XXX changed default */
g.forever = 0; /* do not exit rx even with no traffic */
break;
case 'b': /* burst */
g.burst = atoi(optarg);
break;
case 'c':
g.cpus = atoi(optarg);
break;
case 'p':
g.nthreads = atoi(optarg);
break;
case 'D': /* destination mac */
g.dst_mac.name = optarg;
break;
case 'S': /* source mac */
g.src_mac.name = optarg;
break;
case 'v':
verbose++;
break;
case 'R':
g.tx_rate = atoi(optarg);
break;
case 'X':
g.options |= OPT_DUMP;
break;
case 'C':
g.nmr_config = strdup(optarg);
break;
case 'H':
g.virt_header = atoi(optarg);
break;
case 'e': /* extra bufs */
g.extra_bufs = atoi(optarg);
break;
case 'm':
if (strcmp(optarg, "tx") == 0) {
g.options |= OPT_MONITOR_TX;
} else if (strcmp(optarg, "rx") == 0) {
g.options |= OPT_MONITOR_RX;
} else {
D("unrecognized monitor mode %s", optarg);
}
break;
}
}
if (g.ifname[0] == '\0') {
D("missing ifname");
usage();
}
i = system_ncpus();
if (g.cpus < 0 || g.cpus > i) {
D("%d cpus is too high, have only %d cpus", g.cpus, i);
usage();
}
if (g.cpus == 0)
g.cpus = i;
if (g.pkt_size < 16 || g.pkt_size > 1536) {
D("bad pktsize %d\n", g.pkt_size);
usage();
}
if (g.src_mac.name == NULL) {
static char mybuf[20] = "00:00:00:00:00:00";
/* retrieve source mac address. */
if (source_hwaddr(g.ifname, mybuf) == -1) {
D("Unable to retrieve source mac");
// continue, fail later
}
g.src_mac.name = mybuf;
}
/* extract address ranges */
extract_ip_range(&g.src_ip);
extract_ip_range(&g.dst_ip);
extract_mac_range(&g.src_mac);
extract_mac_range(&g.dst_mac);
if (g.src_ip.start != g.src_ip.end ||
g.src_ip.port0 != g.src_ip.port1 ||
g.dst_ip.start != g.dst_ip.end ||
g.dst_ip.port0 != g.dst_ip.port1)
g.options |= OPT_COPY;
if (g.virt_header != 0 && g.virt_header != VIRT_HDR_1
&& g.virt_header != VIRT_HDR_2) {
D("bad virtio-net-header length");
usage();
}
if (g.dev_type == DEV_TAP) {
D("want to use tap %s", g.ifname);
g.main_fd = tap_alloc(g.ifname);
if (g.main_fd < 0) {
D("cannot open tap %s", g.ifname);
usage();
}
#ifndef NO_PCAP
} else if (g.dev_type == DEV_PCAP) {
char pcap_errbuf[PCAP_ERRBUF_SIZE];
D("using pcap on %s", g.ifname);
pcap_errbuf[0] = '\0'; // init the buffer
g.p = pcap_open_live(g.ifname, 0, 1, 100, pcap_errbuf);
if (g.p == NULL) {
D("cannot open pcap on %s", g.ifname);
usage();
}
#endif /* !NO_PCAP */
} else if (g.dummy_send) { /* but DEV_NETMAP */
D("using a dummy send routine");
} else {
struct nm_desc base_nmd;
bzero(&base_nmd, sizeof(base_nmd));
g.nmd_flags = 0;
g.nmd_flags |= parse_nmr_config(g.nmr_config, &base_nmd.req);
if (g.extra_bufs) {
base_nmd.req.nr_arg3 = g.extra_bufs;
g.nmd_flags |= NM_OPEN_ARG3;
}
/*
* Open the netmap device using nm_open().
*
* protocol stack and may cause a reset of the card,
* which in turn may take some time for the PHY to
* reconfigure. We do the open here to have time to reset.
*/
g.nmd = nm_open(g.ifname, NULL, g.nmd_flags, &base_nmd);
if (g.nmd == NULL) {
D("Unable to open %s: %s", g.ifname, strerror(errno));
goto out;
}
g.main_fd = g.nmd->fd;
D("mapped %dKB at %p", g.nmd->req.nr_memsize>>10, g.nmd->mem);
devqueues = g.nmd->req.nr_rx_rings;
/* validate provided nthreads. */
if (g.nthreads < 1 || g.nthreads > devqueues) {
D("bad nthreads %d, have %d queues", g.nthreads, devqueues);
// continue, fail later
}
if (verbose) {
struct netmap_if *nifp = g.nmd->nifp;
struct nmreq *req = &g.nmd->req;
D("nifp at offset %d, %d tx %d rx region %d",
req->nr_offset, req->nr_tx_rings, req->nr_rx_rings,
req->nr_arg2);
for (i = 0; i <= req->nr_tx_rings; i++) {
D(" TX%d at 0x%lx", i,
(char *)NETMAP_TXRING(nifp, i) - (char *)nifp);
}
for (i = 0; i <= req->nr_rx_rings; i++) {
D(" RX%d at 0x%lx", i,
(char *)NETMAP_RXRING(nifp, i) - (char *)nifp);
}
}
/* Print some debug information. */
fprintf(stdout,
"%s %s: %d queues, %d threads and %d cpus.\n",
(g.td_body == sender_body) ? "Sending on" : "Receiving from",
g.ifname,
devqueues,
g.nthreads,
g.cpus);
if (g.td_body == sender_body) {
fprintf(stdout, "%s -> %s (%s -> %s)\n",
g.src_ip.name, g.dst_ip.name,
g.src_mac.name, g.dst_mac.name);
}
out:
/* Exit if something went wrong. */
if (g.main_fd < 0) {
D("aborting");
usage();
}
}
if (g.options) {
D("--- SPECIAL OPTIONS:%s%s%s%s%s\n",
g.options & OPT_PREFETCH ? " prefetch" : "",
g.options & OPT_ACCESS ? " access" : "",
g.options & OPT_MEMCPY ? " memcpy" : "",
g.options & OPT_INDIRECT ? " indirect" : "",
g.options & OPT_COPY ? " copy" : "");
}
g.tx_period.tv_sec = g.tx_period.tv_nsec = 0;
if (g.tx_rate > 0) {
/* try to have at least something every second,
* reducing the burst size to some 0.01s worth of data
* (but no less than one full set of fragments)
*/
uint64_t x;
int lim = (g.tx_rate)/300;
if (g.burst > lim)
g.burst = lim;
if (g.burst < g.frags)
g.burst = g.frags;
x = ((uint64_t)1000000000 * (uint64_t)g.burst) / (uint64_t) g.tx_rate;
g.tx_period.tv_nsec = x;
g.tx_period.tv_sec = g.tx_period.tv_nsec / 1000000000;
g.tx_period.tv_nsec = g.tx_period.tv_nsec % 1000000000;
}
if (g.td_body == sender_body)
D("Sending %d packets every %ld.%09ld s",
g.burst, g.tx_period.tv_sec, g.tx_period.tv_nsec);
/* Wait for PHY reset. */
D("Wait %d secs for phy reset", wait_link);
sleep(wait_link);
D("Ready...");
/* Install ^C handler. */
global_nthreads = g.nthreads;
signal(SIGINT, sigint_h);
#ifdef MULTISTACK
{
struct sockaddr_in sin;
g.so = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
if (g.so < 0) {
perror("socket");
return 0;
}
sin.sin_family = AF_INET;
sin.sin_port = htons(g.src_ip.port0);
sin.sin_addr.s_addr = htonl(g.src_ip.start);
if (bind(g.so, (struct sockaddr *)&sin, sizeof(sin))) {
perror("bind");
close(g.so);
return 0;
}
strncpy(g.msr.mr_name, g.nmd->req.nr_name, sizeof(g.msr.mr_name));
g.msr.mr_cmd = MULTISTACK_BIND;
g.msr.mr_sin = sin;
g.msr.mr_proto = IPPROTO_UDP;
if (ioctl(g.main_fd, NIOCCONFIG, &g.msr)) {
perror("ioctl");
return 0;
}
}
#endif /* MULTISTACK */
start_threads(&g);
main_thread(&g);
return 0;
}
int main(int argc, char ** argv)
{
char* cmd = NULL;
dc_context_t* context = dc_context_new(receive_event, NULL, "CLI");
int stresstest_only = 0;
dc_cmdline_skip_auth(context); /* disable the need to enter the command `auth <password>` for all mailboxes. */
/* open database from the commandline (if omitted, it can be opened using the `open`-command) */
if (argc == 2) {
if (strcmp(argv[1], "--stress")==0) {
stresstest_only = 1;
}
else if (!dc_open(context, argv[1], NULL)) {
printf("ERROR: Cannot open %s.\n", argv[1]);
}
}
else if (argc != 1) {
printf("ERROR: Bad arguments\n");
}
s_do_log_info = 0;
stress_functions(context);
s_do_log_info = 1;
if (stresstest_only) {
return 0;
}
printf("Delta Chat Core is awaiting your commands.\n");
/* wait for command */
while (1)
{
/* read command */
const char* cmdline = read_cmd();
free(cmd);
cmd = dc_strdup(cmdline);
char* arg1 = strchr(cmd, ' ');
if (arg1) { *arg1 = 0; arg1++; }
if (strcmp(cmd, "connect")==0)
{
start_threads(context);
}
else if (strcmp(cmd, "disconnect")==0)
{
stop_threads(context);
}
else if (strcmp(cmd, "smtp-jobs")==0)
{
if (run_threads) {
printf("smtp-jobs are already running in a thread.\n");
}
else {
dc_perform_smtp_jobs(context);
}
}
else if (strcmp(cmd, "imap-jobs")==0)
{
if (run_threads) {
printf("imap-jobs are already running in a thread.\n");
}
else {
dc_perform_imap_jobs(context);
}
}
else if (strcmp(cmd, "configure")==0)
{
start_threads(context);
dc_configure(context);
}
else if (strcmp(cmd, "oauth2")==0)
{
char* addr = dc_get_config(context, "addr");
if (addr==NULL || addr[0]==0) {
printf("oauth2: set addr first.\n");
}
else {
char* oauth2_url = dc_get_oauth2_url(context, addr,
"chat.delta:/com.b44t.messenger");
if (oauth2_url==NULL) {
printf("OAuth2 not available for %s.\n", addr);
}
else {
printf("Open the following url, "
"set mail_pw to the generated token "
"and server_flags to 2:\n%s\n", oauth2_url);
}
free(oauth2_url);
}
free(addr);
}
else if (strcmp(cmd, "clear")==0)
{
printf("\n\n\n\n"); /* insert some blank lines to visualize the break in the buffer */
printf("\e[1;1H\e[2J"); /* should work on ANSI terminals and on Windows 10. If not, well, then not. */
}
else if (strcmp(cmd, "getqr")==0 || strcmp(cmd, "getbadqr")==0)
int cmd_grep(int argc, const char **argv, const char *prefix)
{
int hit = 0;
int cached = 0, untracked = 0, opt_exclude = -1;
int seen_dashdash = 0;
int external_grep_allowed__ignored;
const char *show_in_pager = NULL, *default_pager = "dummy";
struct grep_opt opt;
struct object_array list = OBJECT_ARRAY_INIT;
struct pathspec pathspec;
struct string_list path_list = STRING_LIST_INIT_NODUP;
int i;
int dummy;
int use_index = 1;
int pattern_type_arg = GREP_PATTERN_TYPE_UNSPECIFIED;
struct option options[] = {
OPT_BOOL(0, "cached", &cached,
N_("search in index instead of in the work tree")),
OPT_NEGBIT(0, "no-index", &use_index,
N_("find in contents not managed by git"), 1),
OPT_BOOL(0, "untracked", &untracked,
N_("search in both tracked and untracked files")),
OPT_SET_INT(0, "exclude-standard", &opt_exclude,
N_("search also in ignored files"), 1),
OPT_GROUP(""),
OPT_BOOL('v', "invert-match", &opt.invert,
N_("show non-matching lines")),
OPT_BOOL('i', "ignore-case", &opt.ignore_case,
N_("case insensitive matching")),
OPT_BOOL('w', "word-regexp", &opt.word_regexp,
N_("match patterns only at word boundaries")),
OPT_SET_INT('a', "text", &opt.binary,
N_("process binary files as text"), GREP_BINARY_TEXT),
OPT_SET_INT('I', NULL, &opt.binary,
N_("don't match patterns in binary files"),
GREP_BINARY_NOMATCH),
OPT_BOOL(0, "textconv", &opt.allow_textconv,
N_("process binary files with textconv filters")),
{ OPTION_INTEGER, 0, "max-depth", &opt.max_depth, N_("depth"),
N_("descend at most <depth> levels"), PARSE_OPT_NONEG,
NULL, 1 },
OPT_GROUP(""),
OPT_SET_INT('E', "extended-regexp", &pattern_type_arg,
N_("use extended POSIX regular expressions"),
GREP_PATTERN_TYPE_ERE),
OPT_SET_INT('G', "basic-regexp", &pattern_type_arg,
N_("use basic POSIX regular expressions (default)"),
GREP_PATTERN_TYPE_BRE),
OPT_SET_INT('F', "fixed-strings", &pattern_type_arg,
N_("interpret patterns as fixed strings"),
GREP_PATTERN_TYPE_FIXED),
OPT_SET_INT('P', "perl-regexp", &pattern_type_arg,
N_("use Perl-compatible regular expressions"),
GREP_PATTERN_TYPE_PCRE),
OPT_GROUP(""),
OPT_BOOL('n', "line-number", &opt.linenum, N_("show line numbers")),
OPT_NEGBIT('h', NULL, &opt.pathname, N_("don't show filenames"), 1),
OPT_BIT('H', NULL, &opt.pathname, N_("show filenames"), 1),
OPT_NEGBIT(0, "full-name", &opt.relative,
N_("show filenames relative to top directory"), 1),
OPT_BOOL('l', "files-with-matches", &opt.name_only,
N_("show only filenames instead of matching lines")),
OPT_BOOL(0, "name-only", &opt.name_only,
N_("synonym for --files-with-matches")),
OPT_BOOL('L', "files-without-match",
&opt.unmatch_name_only,
N_("show only the names of files without match")),
OPT_BOOL('z', "null", &opt.null_following_name,
N_("print NUL after filenames")),
OPT_BOOL('c', "count", &opt.count,
N_("show the number of matches instead of matching lines")),
OPT__COLOR(&opt.color, N_("highlight matches")),
OPT_BOOL(0, "break", &opt.file_break,
N_("print empty line between matches from different files")),
OPT_BOOL(0, "heading", &opt.heading,
N_("show filename only once above matches from same file")),
OPT_GROUP(""),
OPT_CALLBACK('C', "context", &opt, N_("n"),
N_("show <n> context lines before and after matches"),
context_callback),
OPT_INTEGER('B', "before-context", &opt.pre_context,
N_("show <n> context lines before matches")),
OPT_INTEGER('A', "after-context", &opt.post_context,
N_("show <n> context lines after matches")),
OPT_NUMBER_CALLBACK(&opt, N_("shortcut for -C NUM"),
context_callback),
OPT_BOOL('p', "show-function", &opt.funcname,
N_("show a line with the function name before matches")),
OPT_BOOL('W', "function-context", &opt.funcbody,
N_("show the surrounding function")),
OPT_GROUP(""),
OPT_CALLBACK('f', NULL, &opt, N_("file"),
N_("read patterns from file"), file_callback),
{ OPTION_CALLBACK, 'e', NULL, &opt, N_("pattern"),
N_("match <pattern>"), PARSE_OPT_NONEG, pattern_callback },
{ OPTION_CALLBACK, 0, "and", &opt, NULL,
N_("combine patterns specified with -e"),
PARSE_OPT_NOARG | PARSE_OPT_NONEG, and_callback },
OPT_BOOL(0, "or", &dummy, ""),
{ OPTION_CALLBACK, 0, "not", &opt, NULL, "",
PARSE_OPT_NOARG | PARSE_OPT_NONEG, not_callback },
{ OPTION_CALLBACK, '(', NULL, &opt, NULL, "",
PARSE_OPT_NOARG | PARSE_OPT_NONEG | PARSE_OPT_NODASH,
open_callback },
{ OPTION_CALLBACK, ')', NULL, &opt, NULL, "",
PARSE_OPT_NOARG | PARSE_OPT_NONEG | PARSE_OPT_NODASH,
close_callback },
OPT__QUIET(&opt.status_only,
N_("indicate hit with exit status without output")),
OPT_BOOL(0, "all-match", &opt.all_match,
N_("show only matches from files that match all patterns")),
{ OPTION_SET_INT, 0, "debug", &opt.debug, NULL,
N_("show parse tree for grep expression"),
PARSE_OPT_NOARG | PARSE_OPT_HIDDEN, NULL, 1 },
OPT_GROUP(""),
{ OPTION_STRING, 'O', "open-files-in-pager", &show_in_pager,
N_("pager"), N_("show matching files in the pager"),
PARSE_OPT_OPTARG, NULL, (intptr_t)default_pager },
OPT_BOOL(0, "ext-grep", &external_grep_allowed__ignored,
N_("allow calling of grep(1) (ignored by this build)")),
{ OPTION_CALLBACK, 0, "help-all", &options, NULL, N_("show usage"),
PARSE_OPT_HIDDEN | PARSE_OPT_NOARG, help_callback },
OPT_END()
};
/*
* 'git grep -h', unlike 'git grep -h <pattern>', is a request
* to show usage information and exit.
*/
if (argc == 2 && !strcmp(argv[1], "-h"))
usage_with_options(grep_usage, options);
init_grep_defaults();
git_config(grep_cmd_config, NULL);
grep_init(&opt, prefix);
/*
* If there is no -- then the paths must exist in the working
* tree. If there is no explicit pattern specified with -e or
* -f, we take the first unrecognized non option to be the
* pattern, but then what follows it must be zero or more
* valid refs up to the -- (if exists), and then existing
* paths. If there is an explicit pattern, then the first
* unrecognized non option is the beginning of the refs list
* that continues up to the -- (if exists), and then paths.
*/
argc = parse_options(argc, argv, prefix, options, grep_usage,
PARSE_OPT_KEEP_DASHDASH |
PARSE_OPT_STOP_AT_NON_OPTION |
PARSE_OPT_NO_INTERNAL_HELP);
grep_commit_pattern_type(pattern_type_arg, &opt);
if (use_index && !startup_info->have_repository)
/* die the same way as if we did it at the beginning */
setup_git_directory();
/*
* skip a -- separator; we know it cannot be
* separating revisions from pathnames if
* we haven't even had any patterns yet
*/
if (argc > 0 && !opt.pattern_list && !strcmp(argv[0], "--")) {
argv++;
argc--;
}
/* First unrecognized non-option token */
if (argc > 0 && !opt.pattern_list) {
append_grep_pattern(&opt, argv[0], "command line", 0,
GREP_PATTERN);
argv++;
argc--;
}
if (show_in_pager == default_pager)
show_in_pager = git_pager(1);
if (show_in_pager) {
opt.color = 0;
opt.name_only = 1;
opt.null_following_name = 1;
opt.output_priv = &path_list;
opt.output = append_path;
string_list_append(&path_list, show_in_pager);
use_threads = 0;
}
if ((opt.binary & GREP_BINARY_NOMATCH))
use_threads = 0;
if (!opt.pattern_list)
die(_("no pattern given."));
if (!opt.fixed && opt.ignore_case)
opt.regflags |= REG_ICASE;
compile_grep_patterns(&opt);
/* Check revs and then paths */
for (i = 0; i < argc; i++) {
const char *arg = argv[i];
unsigned char sha1[20];
struct object_context oc;
/* Is it a rev? */
if (!get_sha1_with_context(arg, 0, sha1, &oc)) {
struct object *object = parse_object_or_die(sha1, arg);
if (!seen_dashdash)
verify_non_filename(prefix, arg);
add_object_array_with_context(object, arg, &list, xmemdupz(&oc, sizeof(struct object_context)));
continue;
}
if (!strcmp(arg, "--")) {
i++;
seen_dashdash = 1;
}
break;
}
#ifndef NO_PTHREADS
if (list.nr || cached || online_cpus() == 1)
use_threads = 0;
#else
use_threads = 0;
#endif
#ifndef NO_PTHREADS
if (use_threads) {
if (!(opt.name_only || opt.unmatch_name_only || opt.count)
&& (opt.pre_context || opt.post_context ||
opt.file_break || opt.funcbody))
skip_first_line = 1;
start_threads(&opt);
}
#endif
/* The rest are paths */
if (!seen_dashdash) {
int j;
for (j = i; j < argc; j++)
verify_filename(prefix, argv[j], j == i);
}
parse_pathspec(&pathspec, 0,
PATHSPEC_PREFER_CWD |
(opt.max_depth != -1 ? PATHSPEC_MAXDEPTH_VALID : 0),
prefix, argv + i);
pathspec.max_depth = opt.max_depth;
pathspec.recursive = 1;
if (show_in_pager && (cached || list.nr))
die(_("--open-files-in-pager only works on the worktree"));
if (show_in_pager && opt.pattern_list && !opt.pattern_list->next) {
const char *pager = path_list.items[0].string;
int len = strlen(pager);
if (len > 4 && is_dir_sep(pager[len - 5]))
pager += len - 4;
if (opt.ignore_case && !strcmp("less", pager))
string_list_append(&path_list, "-i");
if (!strcmp("less", pager) || !strcmp("vi", pager)) {
struct strbuf buf = STRBUF_INIT;
strbuf_addf(&buf, "+/%s%s",
strcmp("less", pager) ? "" : "*",
opt.pattern_list->pattern);
string_list_append(&path_list, buf.buf);
strbuf_detach(&buf, NULL);
}
}
if (!show_in_pager)
setup_pager();
if (!use_index && (untracked || cached))
die(_("--cached or --untracked cannot be used with --no-index."));
if (!use_index || untracked) {
int use_exclude = (opt_exclude < 0) ? use_index : !!opt_exclude;
if (list.nr)
die(_("--no-index or --untracked cannot be used with revs."));
hit = grep_directory(&opt, &pathspec, use_exclude);
} else if (0 <= opt_exclude) {
die(_("--[no-]exclude-standard cannot be used for tracked contents."));
} else if (!list.nr) {
if (!cached)
setup_work_tree();
hit = grep_cache(&opt, &pathspec, cached);
} else {
if (cached)
die(_("both --cached and trees are given."));
hit = grep_objects(&opt, &pathspec, &list);
}
if (use_threads)
hit |= wait_all();
if (hit && show_in_pager)
run_pager(&opt, prefix);
free_grep_patterns(&opt);
return !hit;
}
int execute_workload(CONFIG *cfg)
{
pthread_t *ithreads, *rthreads, *uthreads;
int ret;
uint64_t last_inserts, last_reads, last_updates;
cfg->phase = WT_PERF_READ;
last_inserts = last_reads = last_updates = 0;
lprintf(cfg, 0, 1, "Starting read threads");
if (cfg->read_threads != 0 && (ret = start_threads(
cfg, cfg->read_threads, &rthreads, read_thread)) != 0)
return (ret);
if (cfg->insert_threads != 0 && (ret = start_threads(
cfg, cfg->insert_threads, &ithreads, insert_thread)) != 0)
return (ret);
if (cfg->update_threads != 0 && (ret = start_threads(
cfg, cfg->update_threads, &uthreads, update_thread)) != 0)
return (ret);
/* Sanity check reporting interval. */
if (cfg->report_interval > cfg->run_time)
cfg->report_interval = cfg->run_time;
gettimeofday(&cfg->phase_start_time, NULL);
for (cfg->elapsed_time = 0;
cfg->elapsed_time < cfg->run_time &&
g_threads_quit < cfg->read_threads;
cfg->elapsed_time += cfg->report_interval) {
sleep(cfg->report_interval);
lprintf(cfg, 0, 1,
"%" PRIu64 " reads, %" PRIu64 " inserts, %" PRIu64
" updates in %d secs",
g_nread_ops - last_reads,
g_nins_ops - last_inserts,
g_nupdate_ops - last_updates,
cfg->report_interval);
last_reads = g_nread_ops;
last_inserts = g_nins_ops;
last_updates = g_nupdate_ops;
}
/* Report if any worker threads didn't finish. */
if (g_threads_quit != 0)
lprintf(cfg, WT_ERROR, 0,
"Worker thread(s) exited without finishing.");
if (cfg->read_threads != 0 &&
(ret = stop_threads(cfg, cfg->read_threads, rthreads)) != 0)
return (ret);
if (cfg->insert_threads != 0 &&
(ret = stop_threads(cfg, cfg->insert_threads, ithreads)) != 0)
return (ret);
if (cfg->update_threads != 0 &&
(ret = stop_threads(cfg, cfg->update_threads, uthreads)) != 0)
return (ret);
return (0);
}
int main(int argc, char **argv)
{
int i;
int j;
int k;
int sum;
int cores;
int connections;
long long total_connections;
long long total_messages;
int active_connections;
int timeouts_connect;
int timeouts_recv;
char buf;
int ret;
char ifname[64];
long rx_bytes, rx_packets, tx_bytes, tx_packets;
prctl(PR_SET_PDEATHSIG, SIGHUP, 0, 0, 0);
if (argc != 7) {
fprintf(stderr, "Usage: %s IP PORT CORES CONNECTIONS MSG_SIZE MESSAGES_PER_CONNECTION\n", argv[0]);
return 1;
}
server_addr.sin_family = AF_INET;
if (!inet_aton(argv[1], &server_addr.sin_addr)) {
fprintf(stderr, "Invalid server IP address \"%s\".\n", argv[1]);
return 1;
}
server_addr.sin_port = htons(atoi(argv[2]));
cores = atoi(argv[3]);
connections = atoi(argv[4]);
msg_size = atoi(argv[5]);
messages_per_connection = strtol(argv[6], NULL, 10);
if (timer_calibrate_tsc()) {
fprintf(stderr, "Error: Timer calibration failed.\n");
return 1;
}
if (mtcp_init("client_mtcp.conf")) {
fprintf(stderr, "Error: mTCP initialization failed.\n");
return 1;
}
get_ifname(&server_addr, ifname);
start_threads(cores, connections);
puts("ok");
fflush(stdout);
while (1) {
ret = read(STDIN_FILENO, &buf, 1);
if (ret == 0) {
fprintf(stderr, "Error: EOF on STDIN.\n");
return 1;
} else if (ret == -1) {
perror("read");
return 1;
}
get_eth_stats(ifname, &rx_bytes, &rx_packets, &tx_bytes, &tx_packets);
total_connections = 0;
total_messages = 0;
active_connections = 0;
timeouts_connect = 0;
timeouts_recv = 0;
for (i = 0; i < cores; i++) {
total_connections += worker[i].total_connections;
total_messages += worker[i].total_messages;
active_connections += worker[i].active_connections;
timeouts_connect += worker[i].timeouts_connect;
timeouts_recv += worker[i].timeouts_recv;
}
printf("%lld %lld %d %d %d ", total_connections, total_messages, active_connections, timeouts_connect, timeouts_recv);
printf("%ld %ld %ld %ld ", rx_bytes, rx_packets, tx_bytes, tx_packets);
printf("0 ");
for (i = 0; i < MAX_ERRSOURCE; i++) {
for (j = 0; j < MAX_ERRNO; j++) {
sum = 0;
for (k = 0; k < cores; k++)
sum += worker[k].errors[i][j];
if (sum)
printf("%d %d %d ", i, j, sum);
}
}
puts("");
fflush(stdout);
}
mtcp_destroy();
return 0;
}
int
main (int argc, char *argv[])
{
setlocale (LC_ALL, "");
bindtextdomain (PACKAGE, LOCALEBASEDIR);
textdomain (PACKAGE);
enum { HELP_OPTION = CHAR_MAX + 1 };
static const char *options = "a:c:d:hiP:vVx";
static const struct option long_options[] = {
{ "add", 1, 0, 'a' },
{ "connect", 1, 0, 'c' },
{ "csv", 0, 0, 0 },
{ "domain", 1, 0, 'd' },
{ "format", 2, 0, 0 },
{ "help", 0, 0, HELP_OPTION },
{ "human-readable", 0, 0, 'h' },
{ "inodes", 0, 0, 'i' },
{ "long-options", 0, 0, 0 },
{ "one-per-guest", 0, 0, 0 },
{ "short-options", 0, 0, 0 },
{ "uuid", 0, 0, 0 },
{ "verbose", 0, 0, 'v' },
{ "version", 0, 0, 'V' },
{ 0, 0, 0, 0 }
};
struct drv *drvs = NULL;
struct drv *drv;
const char *format = NULL;
bool format_consumed = true;
int c;
int option_index;
size_t max_threads = 0;
int err;
g = guestfs_create ();
if (g == NULL) {
fprintf (stderr, _("guestfs_create: failed to create handle\n"));
exit (EXIT_FAILURE);
}
for (;;) {
c = getopt_long (argc, argv, options, long_options, &option_index);
if (c == -1) break;
switch (c) {
case 0: /* options which are long only */
if (STREQ (long_options[option_index].name, "long-options"))
display_long_options (long_options);
else if (STREQ (long_options[option_index].name, "short-options"))
display_short_options (options);
else if (STREQ (long_options[option_index].name, "format")) {
OPTION_format;
} else if (STREQ (long_options[option_index].name, "csv")) {
csv = 1;
} else if (STREQ (long_options[option_index].name, "one-per-guest")) {
/* nothing - left for backwards compatibility */
} else if (STREQ (long_options[option_index].name, "uuid")) {
uuid = 1;
} else {
fprintf (stderr, _("%s: unknown long option: %s (%d)\n"),
program_name, long_options[option_index].name, option_index);
exit (EXIT_FAILURE);
}
break;
case 'a':
OPTION_a;
break;
case 'c':
OPTION_c;
break;
case 'd':
OPTION_d;
break;
case 'h':
human = 1;
break;
case 'i':
inodes = 1;
break;
case 'P':
if (sscanf (optarg, "%zu", &max_threads) != 1) {
fprintf (stderr, _("%s: -P option is not numeric\n"), program_name);
exit (EXIT_FAILURE);
}
break;
case 'v':
OPTION_v;
break;
case 'V':
OPTION_V;
break;
case 'x':
OPTION_x;
break;
case HELP_OPTION:
usage (EXIT_SUCCESS);
default:
usage (EXIT_FAILURE);
}
}
/* Old-style syntax? There were no -a or -d options in the old
* virt-df which is how we detect this.
*/
if (drvs == NULL) {
while (optind < argc) {
if (strchr (argv[optind], '/') ||
access (argv[optind], F_OK) == 0) { /* simulate -a option */
drv = calloc (1, sizeof (struct drv));
if (!drv) {
perror ("malloc");
exit (EXIT_FAILURE);
}
drv->type = drv_a;
drv->a.filename = strdup (argv[optind]);
if (!drv->a.filename) {
perror ("strdup");
exit (EXIT_FAILURE);
}
drv->next = drvs;
drvs = drv;
} else { /* simulate -d option */
drv = calloc (1, sizeof (struct drv));
if (!drv) {
perror ("malloc");
exit (EXIT_FAILURE);
}
drv->type = drv_d;
drv->d.guest = argv[optind];
drv->next = drvs;
drvs = drv;
}
optind++;
}
}
/* These are really constants, but they have to be variables for the
* options parsing code. Assert here that they have known-good
* values.
*/
assert (read_only == 1);
assert (inspector == 0);
assert (live == 0);
/* Must be no extra arguments on the command line. */
if (optind != argc)
usage (EXIT_FAILURE);
CHECK_OPTION_format_consumed;
/* -h and --csv doesn't make sense. Spreadsheets will corrupt these
* fields. (RHBZ#600977).
*/
if (human && csv) {
fprintf (stderr, _("%s: you cannot use -h and --csv options together.\n"),
program_name);
exit (EXIT_FAILURE);
}
/* virt-df has two modes. If the user didn't specify any drives,
* then we do the df on every libvirt guest. That's the if-clause
* below. If the user specified domains/drives, then we assume they
* belong to a single guest. That's the else-clause below.
*/
if (drvs == NULL) {
#if defined(HAVE_LIBVIRT)
get_all_libvirt_domains (libvirt_uri);
print_title ();
err = start_threads (max_threads, g, df_work);
free_domains ();
#else
fprintf (stderr, _("%s: compiled without support for libvirt.\n"),
program_name);
exit (EXIT_FAILURE);
#endif
}
else { /* Single guest. */
CLEANUP_FREE char *name = NULL;
/* Add domains/drives from the command line (for a single guest). */
add_drives (drvs, 'a');
if (guestfs_launch (g) == -1)
exit (EXIT_FAILURE);
print_title ();
/* Synthesize a display name. */
name = make_display_name (drvs);
/* XXX regression: in the Perl version we cached the UUID from the
* libvirt domain handle so it was available to us here. In this
* version the libvirt domain handle is hidden inside
* guestfs_add_domain so the UUID is not available easily for
* single '-d' command-line options.
*/
err = df_on_handle (g, name, NULL, stdout);
/* Free up data structures, no longer needed after this point. */
free_drives (drvs);
}
guestfs_close (g);
exit (err == 0 ? EXIT_SUCCESS : EXIT_FAILURE);
}
int main(void) {
start_threads();
usleep(30*1000*1000);
stop_threads();
}
int main(int argc, char *argv[])
{
int status = 0;
struct rc_config rc;
struct cli_state *state;
bool exit_immediately = false;
/* If no actions are specified, just show the usage text and exit */
if (argc == 1) {
usage(argv[0]);
return 0;
}
init_rc_config(&rc);
if (get_rc_config(argc, argv, &rc)) {
return 1;
}
state = cli_state_create();
if (!state) {
fprintf(stderr, "Failed to create state object\n");
return 1;
}
bladerf_log_set_verbosity(rc.verbosity);
if (rc.show_help) {
usage(argv[0]);
exit_immediately = true;
} else if (rc.show_version) {
printf(BLADERF_CLI_VERSION "\n");
exit_immediately = true;
} else if (rc.show_lib_version) {
struct bladerf_version version;
bladerf_version(&version);
printf("%s\n", version.describe);
exit_immediately = true;
} else if (rc.probe) {
status = cmd_handle(state, "probe");
exit_immediately = true;
}
if (!exit_immediately) {
/* Conditionally performed items, depending on runtime config */
status = open_device(&rc, state, status);
if (status) {
fprintf(stderr, "Could not open device\n");
goto main__issues ;
}
status = flash_fw(&rc, state, status);
if (status) {
fprintf(stderr, "Could not flash firmware\n");
goto main__issues ;
}
status = load_fpga(&rc, state, status);
if (status) {
fprintf(stderr, "Could not load fpga\n");
goto main__issues ;
}
status = open_script(&rc, state, status);
if (status) {
fprintf(stderr, "Could not load scripts\n");
goto main__issues ;
}
main__issues:
/* These items are no longer needed */
free(rc.device);
rc.device = NULL;
free(rc.fw_file);
rc.fw_file = NULL;
free(rc.fpga_file);
rc.fpga_file = NULL;
free(rc.script_file);
rc.script_file = NULL;
/* Drop into interactive mode or begin executing commands
* from a script. If we're not requested to do either, exit cleanly */
if (rc.interactive_mode || state->script != NULL) {
status = start_threads(state);
if (status < 0) {
fprintf(stderr, "Failed to kick off threads\n");
} else {
status = interactive(state, !rc.interactive_mode);
stop_threads(state);
}
}
/* Ensure we exit with RX & TX disabled.
* Can't do much about an error at this point anyway... */
if (state->dev && bladerf_is_fpga_configured(state->dev)) {
bladerf_enable_module(state->dev, BLADERF_MODULE_TX, false);
bladerf_enable_module(state->dev, BLADERF_MODULE_RX, false);
}
}
cli_state_destroy(state);
return status;
}
int adaptor_init(zhandle_t *zh)
{
pthread_mutexattr_t recursive_mx_attr;
struct adaptor_threads *adaptor_threads = calloc(1, sizeof(*adaptor_threads));
if (!adaptor_threads) {
LOG_ERROR(("Out of memory"));
return -1;
}
/* We use a pipe for interrupting select() in unix/sol and socketpair in windows. */
#ifdef WIN32
if (create_socket_pair(adaptor_threads->self_pipe) == -1){
LOG_ERROR(("Can't make a socket."));
#else
if(pipe(adaptor_threads->self_pipe)==-1) {
LOG_ERROR(("Can't make a pipe %d",errno));
#endif
free(adaptor_threads);
return -1;
}
set_nonblock(adaptor_threads->self_pipe[1]);
set_nonblock(adaptor_threads->self_pipe[0]);
pthread_mutex_init(&zh->auth_h.lock,0);
zh->adaptor_priv = adaptor_threads;
pthread_mutex_init(&zh->to_process.lock,0);
pthread_mutex_init(&adaptor_threads->zh_lock,0);
// to_send must be recursive mutex
pthread_mutexattr_init(&recursive_mx_attr);
pthread_mutexattr_settype(&recursive_mx_attr, PTHREAD_MUTEX_RECURSIVE);
pthread_mutex_init(&zh->to_send.lock,&recursive_mx_attr);
pthread_mutexattr_destroy(&recursive_mx_attr);
pthread_mutex_init(&zh->sent_requests.lock,0);
pthread_cond_init(&zh->sent_requests.cond,0);
pthread_mutex_init(&zh->completions_to_process.lock,0);
pthread_cond_init(&zh->completions_to_process.cond,0);
start_threads(zh);
return 0;
}
void adaptor_finish(zhandle_t *zh)
{
struct adaptor_threads *adaptor_threads;
// make sure zh doesn't get destroyed until after we're done here
api_prolog(zh);
adaptor_threads = zh->adaptor_priv;
if(adaptor_threads==0) {
api_epilog(zh,0);
return;
}
if(!pthread_equal(adaptor_threads->io,pthread_self())){
wakeup_io_thread(zh);
pthread_join(adaptor_threads->io, 0);
}else
pthread_detach(adaptor_threads->io);
if(!pthread_equal(adaptor_threads->completion,pthread_self())){
pthread_mutex_lock(&zh->completions_to_process.lock);
pthread_cond_broadcast(&zh->completions_to_process.cond);
pthread_mutex_unlock(&zh->completions_to_process.lock);
pthread_join(adaptor_threads->completion, 0);
}else
pthread_detach(adaptor_threads->completion);
api_epilog(zh,0);
}
void adaptor_destroy(zhandle_t *zh)
{
struct adaptor_threads *adaptor = zh->adaptor_priv;
if(adaptor==0) return;
pthread_cond_destroy(&adaptor->cond);
pthread_mutex_destroy(&adaptor->lock);
pthread_mutex_destroy(&zh->to_process.lock);
pthread_mutex_destroy(&zh->to_send.lock);
pthread_mutex_destroy(&zh->sent_requests.lock);
pthread_cond_destroy(&zh->sent_requests.cond);
pthread_mutex_destroy(&zh->completions_to_process.lock);
pthread_cond_destroy(&zh->completions_to_process.cond);
pthread_mutex_destroy(&adaptor->zh_lock);
pthread_mutex_destroy(&zh->auth_h.lock);
close(adaptor->self_pipe[0]);
close(adaptor->self_pipe[1]);
free(adaptor);
zh->adaptor_priv=0;
}
int wakeup_io_thread(zhandle_t *zh)
{
struct adaptor_threads *adaptor_threads = zh->adaptor_priv;
char c=0;
#ifndef WIN32
return write(adaptor_threads->self_pipe[1],&c,1)==1? ZOK: ZSYSTEMERROR;
#else
return send(adaptor_threads->self_pipe[1], &c, 1, 0)==1? ZOK: ZSYSTEMERROR;
#endif
}
int adaptor_send_queue(zhandle_t *zh, int timeout)
{
if(!zh->close_requested)
return wakeup_io_thread(zh);
// don't rely on the IO thread to send the messages if the app has
// requested to close
return flush_send_queue(zh, timeout);
}
/* These two are declared here because we will run the event loop
* and not the client */
#ifdef WIN32
int zookeeper_interest(zhandle_t *zh, SOCKET *fd, int *interest,
struct timeval *tv);
#else
int zookeeper_interest(zhandle_t *zh, int *fd, int *interest,
struct timeval *tv);
#endif
int zookeeper_process(zhandle_t *zh, int events);
#ifdef WIN32
unsigned __stdcall do_io( void * v)
#else
void *do_io(void *v)
#endif
{
zhandle_t *zh = (zhandle_t*)v;
#ifndef WIN32
struct pollfd fds[2];
struct adaptor_threads *adaptor_threads = zh->adaptor_priv;
api_prolog(zh);
notify_thread_ready(zh);
LOG_DEBUG(("started IO thread"));
fds[0].fd=adaptor_threads->self_pipe[0];
fds[0].events=POLLIN;
while(!zh->close_requested) {
struct timeval tv;
int fd;
int interest;
int timeout;
int maxfd=1;
int rc;
zookeeper_interest(zh, &fd, &interest, &tv);
if (fd != -1) {
fds[1].fd=fd;
fds[1].events=(interest&ZOOKEEPER_READ)?POLLIN:0;
fds[1].events|=(interest&ZOOKEEPER_WRITE)?POLLOUT:0;
maxfd=2;
}
timeout=tv.tv_sec * 1000 + (tv.tv_usec/1000);
poll(fds,maxfd,timeout);
if (fd != -1) {
interest=(fds[1].revents&POLLIN)?ZOOKEEPER_READ:0;
interest|=((fds[1].revents&POLLOUT)||(fds[1].revents&POLLHUP))?ZOOKEEPER_WRITE:0;
}
if(fds[0].revents&POLLIN){
// flush the pipe
char b[128];
while(read(adaptor_threads->self_pipe[0],b,sizeof(b))==sizeof(b)){}
}
#else
fd_set rfds, wfds, efds;
struct adaptor_threads *adaptor_threads = zh->adaptor_priv;
api_prolog(zh);
notify_thread_ready(zh);
LOG_DEBUG(("started IO thread"));
FD_ZERO(&rfds); FD_ZERO(&wfds); FD_ZERO(&efds);
while(!zh->close_requested) {
struct timeval tv;
SOCKET fd;
SOCKET maxfd=adaptor_threads->self_pipe[0];
int interest;
int rc;
zookeeper_interest(zh, &fd, &interest, &tv);
if (fd != -1) {
if (interest&ZOOKEEPER_READ) {
FD_SET(fd, &rfds);
} else {
FD_CLR(fd, &rfds);
}
if (interest&ZOOKEEPER_WRITE) {
FD_SET(fd, &wfds);
} else {
FD_CLR(fd, &wfds);
}
}
FD_SET( adaptor_threads->self_pipe[0] ,&rfds );
rc = select((int)maxfd, &rfds, &wfds, &efds, &tv);
if (fd != -1)
{
interest = (FD_ISSET(fd, &rfds))? ZOOKEEPER_READ:0;
interest|= (FD_ISSET(fd, &wfds))? ZOOKEEPER_WRITE:0;
}
if (FD_ISSET(adaptor_threads->self_pipe[0], &rfds)){
// flush the pipe/socket
char b[128];
while(recv(adaptor_threads->self_pipe[0],b,sizeof(b), 0)==sizeof(b)){}
}
#endif
// dispatch zookeeper events
rc = zookeeper_process(zh, interest);
// check the current state of the zhandle and terminate
// if it is_unrecoverable()
if(is_unrecoverable(zh))
break;
}
api_epilog(zh, 0);
LOG_DEBUG(("IO thread terminated"));
return 0;
}
#ifdef WIN32
unsigned __stdcall do_completion( void * v)
#else
void *do_completion(void *v)
#endif
{
zhandle_t *zh = v;
api_prolog(zh);
notify_thread_ready(zh);
LOG_DEBUG(("started completion thread"));
while(!zh->close_requested) {
pthread_mutex_lock(&zh->completions_to_process.lock);
while(!zh->completions_to_process.head && !zh->close_requested) {
pthread_cond_wait(&zh->completions_to_process.cond, &zh->completions_to_process.lock);
}
pthread_mutex_unlock(&zh->completions_to_process.lock);
process_completions(zh);
}
api_epilog(zh, 0);
LOG_DEBUG(("completion thread terminated"));
return 0;
}