int main(int ac, char** av)
{
stlink_t* sl = NULL;
struct opts o;
int err = -1;
if (get_opts(&o, ac - 1, av + 1) == -1)
{
printf("invalid command line\n");
usage();
goto on_error;
}
if (o.devname != NULL) /* stlinkv1 */
{
sl = stlink_v1_open(100);
if (sl == NULL) goto on_error;
}
else /* stlinkv2 */
{
sl = stlink_open_usb(100);
if (sl == NULL) goto on_error;
}
if (stlink_current_mode(sl) == STLINK_DEV_DFU_MODE)
stlink_exit_dfu_mode(sl);
if (stlink_current_mode(sl) != STLINK_DEV_DEBUG_MODE)
stlink_enter_swd_mode(sl);
stlink_reset(sl);
if (o.do_read == 0) /* write */
{
err = stlink_fwrite_flash(sl, o.filename, o.addr);
if (err == -1)
{
printf("stlink_fwrite_flash() == -1\n");
goto on_error;
}
}
else /* read */
{
err = stlink_fread(sl, o.filename, o.addr, o.size);
if (err == -1)
{
printf("stlink_fread() == -1\n");
goto on_error;
}
}
/* success */
err = 0;
on_error:
if (sl != NULL) stlink_close(sl);
return err;
}
stlink_t* open_sl(void)
{
stlink_t* sl;
sl = stlink_v1_open(0, 1);
if (sl == NULL)
sl = stlink_open_usb(0, 1);
return sl;
}
static stlink_t *stlink_open_first(void)
{
stlink_t* sl = NULL;
sl = stlink_v1_open(0, 1);
if (sl == NULL)
sl = stlink_open_usb(0, 1, NULL);
return sl;
}
int main(int argc, char** argv) {
stlink_t *sl = NULL;
st_state_t state;
memset(&state, 0, sizeof(state));
// set defaults...
state.stlink_version = 2;
state.logging_level = DEFAULT_LOGGING_LEVEL;
state.listen_port = DEFAULT_GDB_LISTEN_PORT;
parse_options(argc, argv, &state);
switch (state.stlink_version) {
case 2:
sl = stlink_open_usb(state.logging_level);
if(sl == NULL) return 1;
break;
case 1:
sl = stlink_v1_open(state.logging_level);
if(sl == NULL) return 1;
break;
}
printf("Chip ID is %08x, Core ID is %08x.\n", sl->chip_id, sl->core_id);
sl->verbose=0;
current_memory_map = make_memory_map(sl);
#ifdef __MINGW32__
WSADATA wsadata;
if (WSAStartup(MAKEWORD(2,2),&wsadata) !=0 ) {
goto winsock_error;
}
#endif
while(serve(sl, state.listen_port, state.elf_filename) == 0);
#ifdef __MINGW32__
winsock_error:
WSACleanup();
#endif
/* Switch back to mass storage mode before closing. */
stlink_run(sl);
stlink_exit_debug_mode(sl);
stlink_close(sl);
return 0;
}
int main(int argc, char** argv) {
sl = NULL;
st_state_t state;
memset(&state, 0, sizeof(state));
// set defaults...
state.stlink_version = 2;
state.logging_level = DEFAULT_LOGGING_LEVEL;
state.listen_port = DEFAULT_GDB_LISTEN_PORT;
parse_options(argc, argv, &state);
switch (state.stlink_version) {
case 2:
sl = stlink_open_usb(state.logging_level);
if(sl == NULL) return 1;
break;
case 1:
sl = stlink_v1_open(state.logging_level);
if(sl == NULL) return 1;
break;
}
signal(SIGINT, catcher);
printf("Chip ID is %08x, Core ID is %08x.\n", sl->chip_id, sl->core_id);
sl->verbose=0;
current_memory_map = make_memory_map(sl);
while(serve(sl, state.listen_port) == state.perist_mode);
/* Switch back to mass storage mode before closing. */
stlink_reset(sl);
stlink_run(sl);
stlink_exit_debug_mode(sl);
stlink_close(sl);
return 0;
}
static void
connect_button_cb (GtkWidget *widget, gpointer data)
{
STlinkGUI *gui;
gint i;
gui = STLINK_GUI (data);
if (gui->sl != NULL)
return;
/* try version 1 then version 2 */
gui->sl = stlink_v1_open(0, 1);
if (gui->sl == NULL) {
gui->sl = stlink_open_usb(0, 1);
}
if (gui->sl == NULL) {
stlink_gui_set_info_error_message (gui, "Failed to connect to STLink."); return;
}
/* code below taken from flash/main.c, refactoring might be in order */
if (stlink_current_mode(gui->sl) == STLINK_DEV_DFU_MODE)
stlink_exit_dfu_mode(gui->sl);
if (stlink_current_mode(gui->sl) != STLINK_DEV_DEBUG_MODE)
stlink_enter_swd_mode(gui->sl);
/* Disable DMA - Set All DMA CCR Registers to zero. - AKS 1/7/2013 */
if (gui->sl->chip_id == STM32_CHIPID_F4) {
memset(gui->sl->q_buf, 0, 4);
for (i = 0; i < 8; i++) {
stlink_write_mem32(gui->sl, 0x40026000 + 0x10 + 0x18 * i, 4);
stlink_write_mem32(gui->sl, 0x40026400 + 0x10 + 0x18 * i, 4);
stlink_write_mem32(gui->sl, 0x40026000 + 0x24 + 0x18 * i, 4);
stlink_write_mem32(gui->sl, 0x40026400 + 0x24 + 0x18 * i, 4);
}
}
stlink_gui_set_connected (gui);
}
int main(int argc, char** argv) {
int32_t voltage;
stlink_t *sl = NULL;
st_state_t state;
memset(&state, 0, sizeof(state));
// set defaults...
state.stlink_version = 2;
state.logging_level = DEFAULT_LOGGING_LEVEL;
state.listen_port = DEFAULT_GDB_LISTEN_PORT;
state.reset = 1; /* By default, reset board */
parse_options(argc, argv, &state);
switch (state.stlink_version) {
case 2:
sl = stlink_open_usb(state.logging_level, 0);
if(sl == NULL) return 1;
break;
case 1:
sl = stlink_v1_open(state.logging_level, 0);
if(sl == NULL) return 1;
break;
}
connected_stlink = sl;
signal(SIGINT, &cleanup);
signal(SIGTERM, &cleanup);
if (state.reset) {
stlink_reset(sl);
}
ILOG("Chip ID is %08x, Core ID is %08x.\n", sl->chip_id, sl->core_id);
voltage = stlink_target_voltage(sl);
if (voltage != -1) {
ILOG("Target voltage is %d mV.\n", voltage);
}
sl->verbose=0;
current_memory_map = make_memory_map(sl);
#ifdef __MINGW32__
WSADATA wsadata;
if (WSAStartup(MAKEWORD(2,2),&wsadata) !=0 ) {
goto winsock_error;
}
#endif
do {
serve(sl, &state);
/* Continue */
stlink_run(sl);
} while (state.persistent);
#ifdef __MINGW32__
winsock_error:
WSACleanup();
#endif
/* Switch back to mass storage mode before closing. */
stlink_exit_debug_mode(sl);
stlink_close(sl);
return 0;
}
int main(int ac, char** av)
{
stlink_t* sl = NULL;
struct opts o;
char serial_buffer[13] = {0};
o.serial = serial_buffer;
int err = -1;
o.size = 0;
if (get_opts(&o, ac - 1, av + 1) == -1)
{
printf("invalid command line\n");
usage();
goto on_error;
}
if (o.devname != NULL) /* stlinkv1 */
{
sl = stlink_v1_open(o.log_level, 1);
if (sl == NULL) goto on_error;
sl->verbose = o.log_level;
}
else /* stlinkv2 */
{
sl = stlink_open_usb(o.log_level, 1, o.serial);
if (sl == NULL) goto on_error;
sl->verbose = o.log_level;
}
if (stlink_current_mode(sl) == STLINK_DEV_DFU_MODE)
stlink_exit_dfu_mode(sl);
if (stlink_current_mode(sl) != STLINK_DEV_DEBUG_MODE)
stlink_enter_swd_mode(sl);
if (o.reset) {
stlink_jtag_reset(sl,2);
stlink_reset(sl);
}
// Disable DMA - Set All DMA CCR Registers to zero. - AKS 1/7/2013
if (sl->chip_id == STM32_CHIPID_F4)
{
memset(sl->q_buf,0,4);
for (int i=0; i<8; i++) {
stlink_write_mem32(sl,0x40026000+0x10+0x18*i,4);
stlink_write_mem32(sl,0x40026400+0x10+0x18*i,4);
stlink_write_mem32(sl,0x40026000+0x24+0x18*i,4);
stlink_write_mem32(sl,0x40026400+0x24+0x18*i,4);
}
}
// Core must be halted to use RAM based flashloaders
stlink_force_debug(sl);
stlink_status(sl);
if (o.cmd == DO_WRITE) /* write */
{
if ((o.addr >= sl->flash_base) &&
(o.addr < sl->flash_base + sl->flash_size)) {
err = stlink_fwrite_flash(sl, o.filename, o.addr);
if (err == -1)
{
printf("stlink_fwrite_flash() == -1\n");
goto on_error;
}
}
else if ((o.addr >= sl->sram_base) &&
(o.addr < sl->sram_base + sl->sram_size)) {
err = stlink_fwrite_sram(sl, o.filename, o.addr);
if (err == -1)
{
printf("stlink_sram_flash() == -1\n");
goto on_error;
}
}
} else if (o.cmd == DO_ERASE)
{
err = stlink_erase_flash_mass(sl);
if (err == -1)
{
printf("stlink_fwrite_flash() == -1\n");
goto on_error;
}
}
else /* read */
{
if ((o.addr >= sl->flash_base) && (o.size == 0) &&
(o.addr < sl->flash_base + sl->flash_size))
o.size = sl->flash_size;
else if ((o.addr >= sl->sram_base) && (o.size == 0) &&
(o.addr < sl->sram_base + sl->sram_size))
o.size = sl->sram_size;
err = stlink_fread(sl, o.filename, o.addr, o.size);
if (err == -1)
{
printf("stlink_fread() == -1\n");
goto on_error;
}
}
if (o.reset) {
stlink_jtag_reset(sl,2);
stlink_reset(sl);
}
/* success */
err = 0;
on_error:
if (sl != NULL)
{
stlink_exit_debug_mode(sl);
stlink_close(sl);
}
return err;
}
int main(int ac, char** av)
{
sl = NULL;
struct opts o;
int err = -1;
signal(SIGINT, catcher);
o.size = 0;
if (get_opts(&o, ac - 1, av + 1) == -1)
{
printf("invalid command line\n");
usage();
goto on_error;
}
if (o.devname != NULL) /* stlinkv1 */
{
sl = stlink_v1_open(50);
sl->verbose = 50;
if (sl == NULL) goto on_error;
}
else /* stlinkv2 */
{
sl = stlink_open_usb(50);
sl->verbose = 50;
if (sl == NULL) goto on_error;
}
if (stlink_current_mode(sl) == STLINK_DEV_DFU_MODE)
stlink_exit_dfu_mode(sl);
if (stlink_current_mode(sl) != STLINK_DEV_DEBUG_MODE)
stlink_enter_swd_mode(sl);
stlink_reset(sl);
printf("Erasing chip entirely...");
stlink_erase_flash_mass(sl);
printf(" Done\n");
stlink_force_debug(sl);
stlink_reset(sl);
if (o.do_read == 0) /* write */
{
err = stlink_fwrite_flash(sl, o.filename, o.addr);
if (err == -1)
{
printf("stlink_fwrite_flash() == -1\n");
goto on_error;
}
}
else /* read */
{
err = stlink_fread(sl, o.filename, o.addr, o.size);
if (err == -1)
{
printf("stlink_fread() == -1\n");
goto on_error;
}
}
/* success */
err = 0;
on_error:
if (sl != NULL)
{
stlink_reset(sl);
stlink_run(sl);
stlink_close(sl);
}
return err;
}
int main(int ac, char** av)
{
stlink_t* sl = NULL;
struct flash_opts o;
int err = -1;
uint8_t * mem = NULL;
o.size = 0;
if (flash_get_opts(&o, ac - 1, av + 1) == -1)
{
printf("invalid command line\n");
usage();
return -1;
}
printf("st-flash %s\n", STLINK_VERSION);
if (o.devname != NULL) /* stlinkv1 */
sl = stlink_v1_open(o.log_level, 1);
else /* stlinkv2 */
sl = stlink_open_usb(o.log_level, 1, (char *)o.serial);
if (sl == NULL)
return -1;
if ( o.flash_size != 0u && o.flash_size != sl->flash_size ) {
sl->flash_size = o.flash_size;
printf("Forcing flash size: --flash=0x%08X\n",(unsigned int)sl->flash_size);
}
sl->verbose = o.log_level;
connected_stlink = sl;
signal(SIGINT, &cleanup);
signal(SIGTERM, &cleanup);
signal(SIGSEGV, &cleanup);
if (stlink_current_mode(sl) == STLINK_DEV_DFU_MODE) {
if (stlink_exit_dfu_mode(sl)) {
printf("Failed to exit DFU mode\n");
goto on_error;
}
}
if (stlink_current_mode(sl) != STLINK_DEV_DEBUG_MODE) {
if (stlink_enter_swd_mode(sl)) {
printf("Failed to enter SWD mode\n");
goto on_error;
}
}
if (o.reset){
if (stlink_jtag_reset(sl, 2)) {
printf("Failed to reset JTAG\n");
goto on_error;
}
if (stlink_reset(sl)) {
printf("Failed to reset device\n");
goto on_error;
}
}
// Disable DMA - Set All DMA CCR Registers to zero. - AKS 1/7/2013
if (sl->chip_id == STLINK_CHIPID_STM32_F4)
{
memset(sl->q_buf,0,4);
for (int i=0;i<8;i++) {
stlink_write_mem32(sl,0x40026000+0x10+0x18*i,4);
stlink_write_mem32(sl,0x40026400+0x10+0x18*i,4);
stlink_write_mem32(sl,0x40026000+0x24+0x18*i,4);
stlink_write_mem32(sl,0x40026400+0x24+0x18*i,4);
}
}
// Core must be halted to use RAM based flashloaders
if (stlink_force_debug(sl)) {
printf("Failed to halt the core\n");
goto on_error;
}
if (stlink_status(sl)) {
printf("Failed to get Core's status\n");
goto on_error;
}
if (o.cmd == FLASH_CMD_WRITE) /* write */
{
size_t size = 0;
if(o.format == FLASH_FORMAT_IHEX) {
err = stlink_parse_ihex(o.filename, stlink_get_erased_pattern(sl), &mem, &size, &o.addr);
if (err == -1) {
printf("Cannot parse %s as Intel-HEX file\n", o.filename);
goto on_error;
}
}
if ((o.addr >= sl->flash_base) &&
(o.addr < sl->flash_base + sl->flash_size)) {
if(o.format == FLASH_FORMAT_IHEX)
err = stlink_mwrite_flash(sl, mem, (uint32_t)size, o.addr);
else
err = stlink_fwrite_flash(sl, o.filename, o.addr);
if (err == -1)
{
printf("stlink_fwrite_flash() == -1\n");
goto on_error;
}
}
else if ((o.addr >= sl->sram_base) &&
(o.addr < sl->sram_base + sl->sram_size)) {
if(o.format == FLASH_FORMAT_IHEX)
err = stlink_mwrite_sram(sl, mem, (uint32_t)size, o.addr);
else
err = stlink_fwrite_sram(sl, o.filename, o.addr);
if (err == -1)
{
printf("stlink_fwrite_sram() == -1\n");
goto on_error;
}
}
else {
err = -1;
printf("Unknown memory region\n");
goto on_error;
}
} else if (o.cmd == FLASH_CMD_LOCK)
{
err = stlink_set_read_protection(sl, true);
if(err != 0)
{
printf("stlink_set_read_protection(true) != 0\n");
goto on_error;
}
} else if (o.cmd == FLASH_CMD_UNLOCK)
{
err = stlink_set_read_protection(sl, false);
if(err != 0)
{
printf("stlink_set_read_protection(false) != 0\n");
goto on_error;
}
} else if (o.cmd == FLASH_CMD_ERASE)
{
err = stlink_erase_flash_mass(sl);
if (err == -1)
{
printf("stlink_erase_flash_mass() == -1\n");
goto on_error;
}
} else if (o.cmd == CMD_RESET)
{
if (stlink_jtag_reset(sl, 2)) {
printf("Failed to reset JTAG\n");
goto on_error;
}
if (stlink_reset(sl)) {
printf("Failed to reset device\n");
goto on_error;
}
}
else /* read */
{
if ((o.addr >= sl->flash_base) && (o.size == 0) &&
(o.addr < sl->flash_base + sl->flash_size))
o.size = sl->flash_size;
else if ((o.addr >= sl->sram_base) && (o.size == 0) &&
(o.addr < sl->sram_base + sl->sram_size))
o.size = sl->sram_size;
err = stlink_fread(sl, o.filename, o.format == FLASH_FORMAT_IHEX, o.addr, o.size);
if (err == -1)
{
printf("stlink_fread() == -1\n");
goto on_error;
}
}
if (o.reset){
stlink_jtag_reset(sl,2);
stlink_reset(sl);
}
/* success */
err = 0;
on_error:
stlink_exit_debug_mode(sl);
stlink_close(sl);
free(mem);
return err;
}
int main(int argc, char** argv) {
stlink_t *sl = NULL;
st_state_t state;
memset(&state, 0, sizeof(state));
// set defaults...
state.stlink_version = 2;
state.logging_level = DEFAULT_LOGGING_LEVEL;
state.listen_port = DEFAULT_GDB_LISTEN_PORT;
parse_options(argc, argv, &state);
switch (state.stlink_version) {
case 2:
sl = stlink_open_usb(state.logging_level);
if(sl == NULL) return 1;
break;
case 1:
sl = stlink_v1_open(state.logging_level);
if(sl == NULL) return 1;
break;
}
if (stlink_current_mode(sl) != STLINK_DEV_DEBUG_MODE) {
if (stlink_current_mode(sl) == STLINK_DEV_DFU_MODE) {
stlink_exit_dfu_mode(sl);
}
stlink_enter_swd_mode(sl);
}
uint32_t chip_id = stlink_chip_id(sl);
uint32_t core_id = stlink_core_id(sl);
/* Fix chip_id for F4 */
if (((chip_id & 0xFFF) == 0x411) && (core_id == CORE_M4_R0)) {
printf("Fixing wrong chip_id for STM32F4 Rev A errata\n");
chip_id = 0x413;
}
printf("Chip ID is %08x, Core ID is %08x.\n", chip_id, core_id);
const struct chip_params* params = NULL;
for(int i = 0; i < sizeof(devices) / sizeof(devices[0]); i++) {
if(devices[i].chip_id == (chip_id & 0xFFF)) {
params = &devices[i];
break;
}
}
if(params == NULL) {
fprintf(stderr, "Cannot recognize the connected device!\n");
return 0;
}
printf("Device connected: %s\n", params->description);
printf("Device parameters: SRAM: 0x%x bytes, Flash: up to 0x%x bytes in pages of 0x%x bytes\n",
params->sram_size, params->max_flash_size, params->flash_pagesize);
FLASH_PAGE = params->flash_pagesize;
uint32_t flash_size;
stlink_read_mem32(sl, params->flash_size_reg, 4);
flash_size = sl->q_buf[0] | (sl->q_buf[1] << 8);
printf("Flash size is %d KiB.\n", flash_size);
// memory map is in 1k blocks.
current_memory_map = make_memory_map(params, flash_size * 0x400);
while(serve(sl, state.listen_port) == 0);
/* Switch back to mass storage mode before closing. */
stlink_run(sl);
stlink_exit_debug_mode(sl);
stlink_close(sl);
return 0;
}
int main(int argc, char *argv[]) {
/* Avoid unused parameter warning */
(void)argv;
// set scpi lib debug level: 0 for no debug info, 10 for lots
switch (argc) {
case 1:
fputs(
"\nUsage: stlink-access-test [anything at all] ...\n"
"\n*** Notice: The stlink firmware violates the USB standard.\n"
"*** Because we just use libusb, we can just tell the kernel's\n"
"*** driver to simply ignore the device...\n"
"*** Unplug the stlink and execute once as root:\n"
"modprobe -r usb-storage && modprobe usb-storage quirks=483:3744:i\n\n",
stderr);
return EXIT_FAILURE;
default:
break;
}
stlink_t *sl = stlink_v1_open(99, 1);
if (sl == NULL)
return EXIT_FAILURE;
// we are in mass mode, go to swd
stlink_enter_swd_mode(sl);
stlink_current_mode(sl);
stlink_core_id(sl);
//----------------------------------------------------------------------
stlink_status(sl);
//stlink_force_debug(sl);
stlink_reset(sl);
stlink_status(sl);
// core system control block
stlink_read_mem32(sl, 0xe000ed00, 4);
DLOG("cpu id base register: SCB_CPUID = got 0x%08x expect 0x411fc231\n", read_uint32(sl->q_buf, 0));
// no MPU
stlink_read_mem32(sl, 0xe000ed90, 4);
DLOG("mpu type register: MPU_TYPER = got 0x%08x expect 0x0\n", read_uint32(sl->q_buf, 0));
#if 0
stlink_read_mem32(sl, 0xe000edf0, 4);
DD(sl, "DHCSR = 0x%08x", read_uint32(sl->q_buf, 0));
stlink_read_mem32(sl, 0x4001100c, 4);
DD(sl, "GPIOC_ODR = 0x%08x", read_uint32(sl->q_buf, 0));
#endif
#if 0
// happy new year 2011: let blink all the leds
// see "RM0041 Reference manual - STM32F100xx advanced ARM-based 32-bit MCUs"
#define GPIOC 0x40011000 // port C
#define GPIOC_CRH (GPIOC + 0x04) // port configuration register high
#define GPIOC_ODR (GPIOC + 0x0c) // port output data register
#define LED_BLUE (1<<8) // pin 8
#define LED_GREEN (1<<9) // pin 9
stlink_read_mem32(sl, GPIOC_CRH, 4);
uint32_t io_conf = read_uint32(sl->q_buf, 0);
DLOG("GPIOC_CRH = 0x%08x\n", io_conf);
// set: general purpose output push-pull, output mode, max speed 10 MHz.
write_uint32(sl->q_buf, 0x44444411);
stlink_write_mem32(sl, GPIOC_CRH, 4);
memset(sl->q_buf, 0, sizeof(sl->q_buf));
for (int i = 0; i < 100; i++) {
write_uint32(sl->q_buf, LED_BLUE | LED_GREEN);
stlink_write_mem32(sl, GPIOC_ODR, 4);
/* stlink_read_mem32(sl, 0x4001100c, 4); */
/* DD(sl, "GPIOC_ODR = 0x%08x", read_uint32(sl->q_buf, 0)); */
usleep(100 * 1000);
memset(sl->q_buf, 0, sizeof(sl->q_buf));
stlink_write_mem32(sl, GPIOC_ODR, 4); // PC lo
usleep(100 * 1000);
}
write_uint32(sl->q_buf, io_conf); // set old state
#endif
#if 0
// TODO rtfm: stlink doesn't have flash write routines
// writing to the flash area confuses the fw for the next read access
//stlink_read_mem32(sl, 0, 1024*6);
// flash 0x08000000 128kB
fputs("++++++++++ read a flash at 0x0800 0000\n", stderr);
stlink_read_mem32(sl, 0x08000000, 1024 * 6); //max 6kB
clear_buf(sl);
stlink_read_mem32(sl, 0x08000c00, 5);
stlink_read_mem32(sl, 0x08000c00, 4);
mark_buf(sl);
stlink_write_mem32(sl, 0x08000c00, 4);
stlink_read_mem32(sl, 0x08000c00, 256);
stlink_read_mem32(sl, 0x08000c00, 256);
#endif
#if 0
// sram 0x20000000 8kB
fputs("\n++++++++++ read/write 8bit, sram at 0x2000 0000 ++++++++++++++++\n\n", stderr);
memset(sl->q_buf, 0, sizeof(sl->q_buf));
mark_buf(sl);
//stlink_write_mem8(sl, 0x20000000, 16);
//stlink_write_mem8(sl, 0x20000000, 1);
//stlink_write_mem8(sl, 0x20000001, 1);
stlink_write_mem8(sl, 0x2000000b, 3);
stlink_read_mem32(sl, 0x20000000, 16);
#endif
#if 0
// a not aligned mem32 access doesn't work indeed
fputs("\n++++++++++ read/write 32bit, sram at 0x2000 0000 ++++++++++++++++\n\n", stderr);
memset(sl->q_buf, 0, sizeof(sl->q_buf));
mark_buf(sl);
stlink_write_mem32(sl, 0x20000000, 1);
stlink_read_mem32(sl, 0x20000000, 16);
mark_buf(sl);
stlink_write_mem32(sl, 0x20000001, 1);
stlink_read_mem32(sl, 0x20000000, 16);
mark_buf(sl);
stlink_write_mem32(sl, 0x2000000b, 3);
stlink_read_mem32(sl, 0x20000000, 16);
mark_buf(sl);
stlink_write_mem32(sl, 0x20000000, 17);
stlink_read_mem32(sl, 0x20000000, 32);
#endif
#if 0
// sram 0x20000000 8kB
fputs("++++++++++ read/write 32bit, sram at 0x2000 0000 ++++++++++++\n", stderr);
memset(sl->q_buf, 0, sizeof(sl->q_buf));
mark_buf(sl);
stlink_write_mem8(sl, 0x20000000, 64);
stlink_read_mem32(sl, 0x20000000, 64);
mark_buf(sl);
stlink_write_mem32(sl, 0x20000000, 1024 * 8); //8kB
stlink_read_mem32(sl, 0x20000000, 1024 * 6);
stlink_read_mem32(sl, 0x20000000 + 1024 * 6, 1024 * 2);
#endif
#if 1
reg regs;
stlink_read_all_regs(sl, ®s);
stlink_step(sl);
fputs("++++++++++ write r0 = 0x12345678\n", stderr);
stlink_write_reg(sl, 0x12345678, 0);
stlink_read_reg(sl, 0, ®s);
stlink_read_all_regs(sl, ®s);
#endif
#if 0
stlink_run(sl);
stlink_status(sl);
stlink_force_debug(sl);
stlink_status(sl);
#endif
#if 0 /* read the system bootloader */
fputs("\n++++++++++ reading bootloader ++++++++++++++++\n\n", stderr);
stlink_fread(sl, "/tmp/barfoo", sl->sys_base, sl->sys_size);
#endif
#if 0 /* read the flash memory */
fputs("\n+++++++ read flash memory\n\n", stderr);
/* mark_buf(sl); */
stlink_read_mem32(sl, 0x08000000, 4);
#endif
#if 0 /* flash programming */
fputs("\n+++++++ program flash memory\n\n", stderr);
stlink_fwrite_flash(sl, "/tmp/foobar", 0x08000000);
#endif
#if 0 /* check file contents */
fputs("\n+++++++ check flash memory\n\n", stderr);
{
const int res = stlink_fcheck_flash(sl, "/tmp/foobar", 0x08000000);
printf("_____ stlink_fcheck_flash() == %d\n", res);
}
#endif
#if 0
fputs("\n+++++++ sram write and execute\n\n", stderr);
stlink_fwrite_sram(sl, "/tmp/foobar", sl->sram_base);
stlink_run_at(sl, sl->sram_base);
#endif
#if 0
stlink_run(sl);
stlink_status(sl);
//----------------------------------------------------------------------
// back to mass mode, just in case ...
stlink_exit_debug_mode(sl);
stlink_current_mode(sl);
stlink_close(sl);
#endif
//fflush(stderr); fflush(stdout);
return EXIT_SUCCESS;
}
