Ejemplo n.º 1
0
static int meson6_dwmac_probe(struct platform_device *pdev)
{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	struct meson_dwmac *dwmac;
	struct resource *res;
	int ret;

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
		return ret;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
		return PTR_ERR(plat_dat);

	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
	if (!dwmac)
		return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	dwmac->reg = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(dwmac->reg))
		return PTR_ERR(dwmac->reg);

	plat_dat->bsp_priv = dwmac;
	plat_dat->fix_mac_speed = meson6_dwmac_fix_mac_speed;

	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
Ejemplo n.º 2
0
static int socfpga_dwmac_probe(struct platform_device *pdev)
{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	struct device		*dev = &pdev->dev;
	int			ret;
	struct socfpga_dwmac	*dwmac;
	struct net_device	*ndev;
	struct stmmac_priv	*stpriv;

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
		return ret;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
		return PTR_ERR(plat_dat);

	dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL);
	if (!dwmac) {
		ret = -ENOMEM;
		goto err_remove_config_dt;
	}

	ret = socfpga_dwmac_parse_data(dwmac, dev);
	if (ret) {
		dev_err(dev, "Unable to parse OF data\n");
		goto err_remove_config_dt;
	}

	plat_dat->bsp_priv = dwmac;
	plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed;

	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
	if (ret)
		goto err_remove_config_dt;

	ndev = platform_get_drvdata(pdev);
	stpriv = netdev_priv(ndev);

	/* The socfpga driver needs to control the stmmac reset to set the phy
	 * mode. Create a copy of the core reset handle so it can be used by
	 * the driver later.
	 */
	dwmac->stmmac_rst = stpriv->stmmac_rst;

	ret = socfpga_dwmac_set_phy_mode(dwmac);
	if (ret)
		goto err_dvr_remove;

	return 0;

err_dvr_remove:
	stmmac_dvr_remove(&pdev->dev);
err_remove_config_dt:
	stmmac_remove_config_dt(pdev, plat_dat);

	return ret;
}
Ejemplo n.º 3
0
/**
 * stmmac_pci_probe
 *
 * @pdev: pci device pointer
 * @id: pointer to table of device id/id's.
 *
 * Description: This probing function gets called for all PCI devices which
 * match the ID table and are not "owned" by other driver yet. This function
 * gets passed a "struct pci_dev *" for each device whose entry in the ID table
 * matches the device. The probe functions returns zero when the driver choose
 * to take "ownership" of the device or an error code(-ve no) otherwise.
 */
static int stmmac_pci_probe(struct pci_dev *pdev,
			    const struct pci_device_id *id)
{
	struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
	struct plat_stmmacenet_data *plat;
	struct stmmac_resources res;
	int i;
	int ret;

	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
	if (!plat)
		return -ENOMEM;

	plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
					   sizeof(*plat->mdio_bus_data),
					   GFP_KERNEL);
	if (!plat->mdio_bus_data)
		return -ENOMEM;

	plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
				     GFP_KERNEL);
	if (!plat->dma_cfg)
		return -ENOMEM;

	/* Enable pci device */
	ret = pci_enable_device(pdev);
	if (ret) {
		dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n",
			__func__);
		return ret;
	}

	/* Get the base address of device */
	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
		if (pci_resource_len(pdev, i) == 0)
			continue;
		ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev));
		if (ret)
			return ret;
		break;
	}

	pci_set_master(pdev);

	ret = info->setup(pdev, plat);
	if (ret)
		return ret;

	pci_enable_msi(pdev);

	memset(&res, 0, sizeof(res));
	res.addr = pcim_iomap_table(pdev)[i];
	res.wol_irq = pdev->irq;
	res.irq = pdev->irq;

	return stmmac_dvr_probe(&pdev->dev, plat, &res);
}
Ejemplo n.º 4
0
static int dwmac_generic_probe(struct platform_device *pdev)
{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	int ret;

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
		return ret;

	if (pdev->dev.of_node) {
		plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
		if (IS_ERR(plat_dat)) {
			dev_err(&pdev->dev, "dt configuration failed\n");
			return PTR_ERR(plat_dat);
		}
	} else {
		plat_dat = dev_get_platdata(&pdev->dev);
		if (!plat_dat) {
			dev_err(&pdev->dev, "no platform data provided\n");
			return  -EINVAL;
		}

		/* Set default value for multicast hash bins */
		plat_dat->multicast_filter_bins = HASH_TABLE_SIZE;

		/* Set default value for unicast filter entries */
		plat_dat->unicast_filter_entries = 1;
	}

	/* Custom initialisation (if needed) */
	if (plat_dat->init) {
		ret = plat_dat->init(pdev, plat_dat->bsp_priv);
		if (ret)
			goto err_remove_config_dt;
	}

	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
	if (ret)
		goto err_exit;

	return 0;

err_exit:
	if (plat_dat->exit)
		plat_dat->exit(pdev, plat_dat->bsp_priv);
err_remove_config_dt:
	if (pdev->dev.of_node)
		stmmac_remove_config_dt(pdev, plat_dat);

	return ret;
}
Ejemplo n.º 5
0
static int rk_gmac_probe(struct platform_device *pdev)
{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	const struct rk_gmac_ops *data;
	int ret;

	data = of_device_get_match_data(&pdev->dev);
	if (!data) {
		dev_err(&pdev->dev, "no of match data provided\n");
		return -EINVAL;
	}

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
		return ret;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
		return PTR_ERR(plat_dat);

	plat_dat->has_gmac = true;
	plat_dat->fix_mac_speed = rk_fix_speed;

	plat_dat->bsp_priv = rk_gmac_setup(pdev, plat_dat, data);
	if (IS_ERR(plat_dat->bsp_priv)) {
		ret = PTR_ERR(plat_dat->bsp_priv);
		goto err_remove_config_dt;
	}

	ret = rk_gmac_clk_init(plat_dat);
	if (ret)
		return ret;

	ret = rk_gmac_powerup(plat_dat->bsp_priv);
	if (ret)
		goto err_remove_config_dt;

	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
	if (ret)
		goto err_gmac_powerdown;

	return 0;

err_gmac_powerdown:
	rk_gmac_powerdown(plat_dat->bsp_priv);
err_remove_config_dt:
	stmmac_remove_config_dt(pdev, plat_dat);

	return ret;
}
Ejemplo n.º 6
0
static int oxnas_dwmac_probe(struct platform_device *pdev)
{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	struct device_node *sysctrl;
	struct oxnas_dwmac *dwmac;
	int ret;

	sysctrl = of_parse_phandle(pdev->dev.of_node, "oxsemi,sys-ctrl", 0);
	if (!sysctrl) {
		dev_err(&pdev->dev, "failed to get sys-ctrl node\n");
		return -EINVAL;
	}

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
		return ret;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
		return PTR_ERR(plat_dat);

	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
	if (!dwmac)
		return -ENOMEM;

	dwmac->dev = &pdev->dev;
	plat_dat->bsp_priv = dwmac;

	dwmac->regmap = syscon_node_to_regmap(sysctrl);
	if (IS_ERR(dwmac->regmap)) {
		dev_err(&pdev->dev, "failed to have sysctrl regmap\n");
		return PTR_ERR(dwmac->regmap);
	}

	dwmac->clk = devm_clk_get(&pdev->dev, "gmac");
	if (IS_ERR(dwmac->clk))
		return PTR_ERR(dwmac->clk);

	ret = oxnas_dwmac_init(dwmac);
	if (ret)
		return ret;

	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
	if (ret)
		clk_disable_unprepare(dwmac->clk);

	return ret;
}
Ejemplo n.º 7
0
static int stm32_dwmac_probe(struct platform_device *pdev)
{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	struct stm32_dwmac *dwmac;
	int ret;

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
		return ret;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
		return PTR_ERR(plat_dat);

	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
	if (!dwmac) {
		ret = -ENOMEM;
		goto err_remove_config_dt;
	}

	ret = stm32_dwmac_parse_data(dwmac, &pdev->dev);
	if (ret) {
		dev_err(&pdev->dev, "Unable to parse OF data\n");
		goto err_remove_config_dt;
	}

	plat_dat->bsp_priv = dwmac;

	ret = stm32_dwmac_init(plat_dat);
	if (ret)
		goto err_remove_config_dt;

	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
	if (ret)
		goto err_clk_disable;

	return 0;

err_clk_disable:
	stm32_dwmac_clk_disable(dwmac);
err_remove_config_dt:
	stmmac_remove_config_dt(pdev, plat_dat);

	return ret;
}
Ejemplo n.º 8
0
static int lpc18xx_dwmac_probe(struct platform_device *pdev)
{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	struct regmap *reg;
	u8 ethmode;
	int ret;

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
		return ret;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
		return PTR_ERR(plat_dat);

	plat_dat->has_gmac = true;

	reg = syscon_regmap_lookup_by_compatible("nxp,lpc1850-creg");
	if (IS_ERR(reg)) {
		dev_err(&pdev->dev, "syscon lookup failed\n");
		return PTR_ERR(reg);
	}

	if (plat_dat->interface == PHY_INTERFACE_MODE_MII) {
		ethmode = LPC18XX_CREG_CREG6_ETHMODE_MII;
	} else if (plat_dat->interface == PHY_INTERFACE_MODE_RMII) {
		ethmode = LPC18XX_CREG_CREG6_ETHMODE_RMII;
	} else {
		dev_err(&pdev->dev, "Only MII and RMII mode supported\n");
		return -EINVAL;
	}

	regmap_update_bits(reg, LPC18XX_CREG_CREG6,
			   LPC18XX_CREG_CREG6_ETHMODE_MASK, ethmode);

	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
Ejemplo n.º 9
0
static int rk_gmac_probe(struct platform_device *pdev)
{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	const struct rk_gmac_ops *data;
	int ret;

	data = of_device_get_match_data(&pdev->dev);
	if (!data) {
		dev_err(&pdev->dev, "no of match data provided\n");
		return -EINVAL;
	}

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
		return ret;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
		return PTR_ERR(plat_dat);

	plat_dat->has_gmac = true;
	plat_dat->init = rk_gmac_init;
	plat_dat->exit = rk_gmac_exit;
	plat_dat->fix_mac_speed = rk_fix_speed;
	plat_dat->suspend = rk_gmac_suspend;
	plat_dat->resume = rk_gmac_resume;

	plat_dat->bsp_priv = rk_gmac_setup(pdev, data);
	if (IS_ERR(plat_dat->bsp_priv))
		return PTR_ERR(plat_dat->bsp_priv);

	ret = rk_gmac_init(pdev, plat_dat->bsp_priv);
	if (ret)
		return ret;

	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
Ejemplo n.º 10
0
/**
 * stmmac_pltfr_probe
 * @pdev: platform device pointer
 * Description: platform_device probe function. It allocates
 * the necessary resources and invokes the main to init
 * the net device, register the mdio bus etc.
 */
static int stmmac_pltfr_probe(struct platform_device *pdev)
{
	int ret = 0;
	struct resource *res;
	void __iomem *addr = NULL;
	struct stmmac_priv *priv = NULL;
	struct plat_stmmacenet_data *plat_dat = NULL;
	const char *mac = NULL;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res)
		return -ENODEV;

	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
		pr_err("%s: ERROR: memory allocation failed"
		       "cannot get the I/O addr 0x%x\n",
		       __func__, (unsigned int)res->start);
		return -EBUSY;
	}

	addr = ioremap(res->start, resource_size(res));
	if (!addr) {
		pr_err("%s: ERROR: memory mapping failed", __func__);
		ret = -ENOMEM;
		goto out_release_region;
	}

	if (pdev->dev.of_node) {
		plat_dat = devm_kzalloc(&pdev->dev,
					sizeof(struct plat_stmmacenet_data),
					GFP_KERNEL);
		if (!plat_dat) {
			pr_err("%s: ERROR: no memory", __func__);
			ret = -ENOMEM;
			goto out_unmap;
		}

		ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
		if (ret) {
			pr_err("%s: main dt probe failed", __func__);
			goto out_unmap;
		}
	} else {
		plat_dat = pdev->dev.platform_data;
	}

	/* Custom initialisation (if needed)*/
	if (plat_dat->init) {
		ret = plat_dat->init(pdev);
		if (unlikely(ret))
			goto out_unmap;
	}

	priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
	if (!priv) {
		pr_err("%s: main driver probe failed", __func__);
		goto out_unmap;
	}

	/* Get MAC address if available (DT) */
	if (mac)
		memcpy(priv->dev->dev_addr, mac, ETH_ALEN);

	/* Get the MAC information */
	priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
	if (priv->dev->irq == -ENXIO) {
		pr_err("%s: ERROR: MAC IRQ configuration "
		       "information not found\n", __func__);
		ret = -ENXIO;
		goto out_unmap;
	}

	/*
	 * On some platforms e.g. SPEAr the wake up irq differs from the mac irq
	 * The external wake up irq can be passed through the platform code
	 * named as "eth_wake_irq"
	 *
	 * In case the wake up interrupt is not passed from the platform
	 * so the driver will continue to use the mac irq (ndev->irq)
	 */
	priv->wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
	if (priv->wol_irq == -ENXIO)
		priv->wol_irq = priv->dev->irq;

	platform_set_drvdata(pdev, priv->dev);

	pr_debug("STMMAC platform driver registration completed");

	return 0;

out_unmap:
	iounmap(addr);
	platform_set_drvdata(pdev, NULL);

out_release_region:
	release_mem_region(res->start, resource_size(res));

	return ret;
}
Ejemplo n.º 11
0
static int ipq806x_gmac_probe(struct platform_device *pdev)
{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	struct device *dev = &pdev->dev;
	struct ipq806x_gmac *gmac;
	int val;
	void *err;

	val = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (val)
		return val;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
		return PTR_ERR(plat_dat);

	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
	if (!gmac)
		return -ENOMEM;

	gmac->pdev = pdev;

	err = ipq806x_gmac_of_parse(gmac);
	if (IS_ERR(err)) {
		dev_err(dev, "device tree parsing error\n");
		return PTR_ERR(err);
	}

	regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL,
		     QSGMII_PCS_CAL_LCKDT_CTL_RST);

	/* Inter frame gap is set to 12 */
	val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET |
	      12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET;
	/* We also initiate an AXI low power exit request */
	val |= NSS_COMMON_GMAC_CTL_CSYS_REQ;
	switch (gmac->phy_mode) {
	case PHY_INTERFACE_MODE_RGMII:
		val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
		break;
	case PHY_INTERFACE_MODE_SGMII:
		val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
		break;
	default:
		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
			phy_modes(gmac->phy_mode));
		return -EINVAL;
	}
	regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);

	/* Configure the clock src according to the mode */
	regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val);
	val &= ~(1 << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id));
	switch (gmac->phy_mode) {
	case PHY_INTERFACE_MODE_RGMII:
		val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) <<
			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
		break;
	case PHY_INTERFACE_MODE_SGMII:
		val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) <<
			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
		break;
	default:
		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
			phy_modes(gmac->phy_mode));
		return -EINVAL;
	}
	regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);

	/* Enable PTP clock */
	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
	val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);

	if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
		regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
			     QSGMII_PHY_CDR_EN |
			     QSGMII_PHY_RX_FRONT_EN |
			     QSGMII_PHY_RX_SIGNAL_DETECT_EN |
			     QSGMII_PHY_TX_DRIVER_EN |
			     QSGMII_PHY_QSGMII_EN |
			     0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
			     0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET |
			     0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
			     0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
			     0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET);
	}

	plat_dat->has_gmac = true;
	plat_dat->bsp_priv = gmac;
	plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;

	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
/**
 * stmmac_pci_probe
 *
 * @pdev: pci device pointer
 * @id: pointer to table of device id/id's.
 *
 * Description: This probing function gets called for all PCI devices which
 * match the ID table and are not "owned" by other driver yet. This function
 * gets passed a "struct pci_dev *" for each device whose entry in the ID table
 * matches the device. The probe functions returns zero when the driver choose
 * to take "ownership" of the device or an error code(-ve no) otherwise.
 */
static int __devinit stmmac_pci_probe(struct pci_dev *pdev,
				      const struct pci_device_id *id)
{
	int ret = 0;
	void __iomem *addr = NULL;
	struct stmmac_priv *priv = NULL;
	int i;

	/* Enable pci device */
	ret = pci_enable_device(pdev);
	if (ret) {
		pr_err("%s : ERROR: failed to enable %s device\n", __func__,
		       pci_name(pdev));
		return ret;
	}
	if (pci_request_regions(pdev, STMMAC_RESOURCE_NAME)) {
		pr_err("%s: ERROR: failed to get PCI region\n", __func__);
		ret = -ENODEV;
		goto err_out_req_reg_failed;
	}

	/* Get the base address of device */
	for (i = 0; i <= 5; i++) {
		if (pci_resource_len(pdev, i) == 0)
			continue;
		addr = pci_iomap(pdev, i, 0);
		if (addr == NULL) {
			pr_err("%s: ERROR: cannot map register memory, aborting",
			       __func__);
			ret = -EIO;
			goto err_out_map_failed;
		}
		break;
	}
	pci_set_master(pdev);

	stmmac_default_data();

	priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat, addr);
	if (!priv) {
		pr_err("%s: main driver probe failed", __func__);
		goto err_out;
	}
	priv->dev->irq = pdev->irq;
	priv->wol_irq = pdev->irq;

	pci_set_drvdata(pdev, priv->dev);

	pr_debug("STMMAC platform driver registration completed");

	return 0;

err_out:
	pci_clear_master(pdev);
err_out_map_failed:
	pci_release_regions(pdev);
err_out_req_reg_failed:
	pci_disable_device(pdev);

	return ret;
}
Ejemplo n.º 13
0
static int meson8b_dwmac_probe(struct platform_device *pdev)
{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	struct resource *res;
	struct meson8b_dwmac *dwmac;
	int ret;

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
		return ret;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
		return PTR_ERR(plat_dat);

	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
	if (!dwmac) {
		ret = -ENOMEM;
		goto err_remove_config_dt;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	dwmac->regs = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(dwmac->regs)) {
		ret = PTR_ERR(dwmac->regs);
		goto err_remove_config_dt;
	}

	dwmac->pdev = pdev;
	dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
	if (dwmac->phy_mode < 0) {
		dev_err(&pdev->dev, "missing phy-mode property\n");
		ret = -EINVAL;
		goto err_remove_config_dt;
	}

	/* use 2ns as fallback since this value was previously hardcoded */
	if (of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns",
				 &dwmac->tx_delay_ns))
		dwmac->tx_delay_ns = 2;

	ret = meson8b_init_rgmii_tx_clk(dwmac);
	if (ret)
		goto err_remove_config_dt;

	ret = meson8b_init_prg_eth(dwmac);
	if (ret)
		goto err_remove_config_dt;

	plat_dat->bsp_priv = dwmac;

	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
	if (ret)
		goto err_clk_disable;

	return 0;

err_clk_disable:
	if (phy_interface_mode_is_rgmii(dwmac->phy_mode))
		clk_disable_unprepare(dwmac->rgmii_tx_en_clk);
err_remove_config_dt:
	stmmac_remove_config_dt(pdev, plat_dat);

	return ret;
}
Ejemplo n.º 14
0
/**
 * stmmac_pltfr_probe
 * @pdev: platform device pointer
 * Description: platform_device probe function. It allocates
 * the necessary resources and invokes the main to init
 * the net device, register the mdio bus etc.
 */
static int stmmac_pltfr_probe(struct platform_device *pdev)
{
	int ret = 0;
	//addr =phys_to_virt();
	   struct resource *res;
	 struct device *dev = &pdev->dev;
        void __iomem *addr = NULL;
        struct stmmac_priv *priv = NULL;
        struct plat_stmmacenet_data *plat_dat = NULL;
        const char *mac = NULL;
#ifdef CONFIG_DWMAC_MESON
	switch_mod_gate_by_name("ethernet",1);
#endif
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!res)
                return -ENODEV;

        addr = devm_ioremap_resource(dev, res);
	//addr =  ( void* )(0xfe0c0000);
	printk("ethernet base addr is %x\n", (unsigned int)addr);
	plat_dat = dev_get_platdata(&pdev->dev);
	if (pdev->dev.of_node) {
		if (!plat_dat)
			plat_dat = devm_kzalloc(&pdev->dev,
					sizeof(struct plat_stmmacenet_data),
					GFP_KERNEL);
		if (!plat_dat) {
			pr_err("%s: ERROR: no memory", __func__);
			return  -ENOMEM;
		}

		ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
		if (ret) {
			pr_err("%s: main dt probe failed", __func__);
			return ret;
		}
	}

	/* Custom setup (if needed) */
	if (plat_dat->setup) {
		plat_dat->bsp_priv = plat_dat->setup(pdev);
		if (IS_ERR(plat_dat->bsp_priv))
			return PTR_ERR(plat_dat->bsp_priv);
	}

	/* Custom initialisation (if needed)*/
	if (plat_dat->init) {
		ret = plat_dat->init(pdev, plat_dat->bsp_priv);
		if (unlikely(ret))
			return ret;
	}

	priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
	if (IS_ERR(priv)) {
		pr_err("%s: main driver probe failed", __func__);
		return PTR_ERR(priv);
	}

	/* Get MAC address if available (DT) */
	if (mac)
		memcpy(priv->dev->dev_addr, mac, ETH_ALEN);

	/* Get the MAC information */
	priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
	if (priv->dev->irq < 0) {
		if (priv->dev->irq != -EPROBE_DEFER) {
			netdev_err(priv->dev,
				   "MAC IRQ configuration information not found\n");
		}
		return priv->dev->irq;
	}

	/*
	 * On some platforms e.g. SPEAr the wake up irq differs from the mac irq
	 * The external wake up irq can be passed through the platform code
	 * named as "eth_wake_irq"
	 *
	 * In case the wake up interrupt is not passed from the platform
	 * so the driver will continue to use the mac irq (ndev->irq)
	 */
	priv->wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
	if (priv->wol_irq < 0) {
		if (priv->wol_irq == -EPROBE_DEFER)
			return -EPROBE_DEFER;
		priv->wol_irq = priv->dev->irq;
	}

	priv->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
	if (priv->lpi_irq == -EPROBE_DEFER)
		return -EPROBE_DEFER;

	platform_set_drvdata(pdev, priv->dev);

	pr_debug("STMMAC platform driver registration completed");

	return 0;
}
Ejemplo n.º 15
0
/**
 * stmmac_pltfr_probe
 * @pdev: platform device pointer
 * Description: platform_device probe function. It allocates
 * the necessary resources and invokes the main to init
 * the net device, register the mdio bus etc.
 */
static int stmmac_pltfr_probe(struct platform_device *pdev)
{
	int ret = 0;
	struct resource *res;
	void __iomem *addr = NULL;
	struct stmmac_priv *priv = NULL;
	struct plat_stmmacenet_data *plat_dat;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res)
		return -ENODEV;

	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
		pr_err("%s: ERROR: memory allocation failed"
		       "cannot get the I/O addr 0x%x\n",
		       __func__, (unsigned int)res->start);
		return -EBUSY;
	}

	addr = ioremap(res->start, resource_size(res));
	if (!addr) {
		pr_err("%s: ERROR: memory mapping failed", __func__);
		ret = -ENOMEM;
		goto out_release_region;
	}
	plat_dat = pdev->dev.platform_data;
	priv = stmmac_dvr_probe(&(pdev->dev), plat_dat);
	if (!priv) {
		pr_err("%s: main drivr probe failed", __func__);
		goto out_release_region;
	}

	priv->ioaddr = addr;
	/* Set the I/O base addr */
	priv->dev->base_addr = (unsigned long)addr;

	/* Get the MAC information */
	priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
	if (priv->dev->irq == -ENXIO) {
		pr_err("%s: ERROR: MAC IRQ configuration "
		       "information not found\n", __func__);
		ret = -ENXIO;
		goto out_unmap;
	}

	/*
	 * On some platforms e.g. SPEAr the wake up irq differs from the mac irq
	 * The external wake up irq can be passed through the platform code
	 * named as "eth_wake_irq"
	 *
	 * In case the wake up interrupt is not passed from the platform
	 * so the driver will continue to use the mac irq (ndev->irq)
	 */
	priv->wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
	if (priv->wol_irq == -ENXIO)
		priv->wol_irq = priv->dev->irq;

	platform_set_drvdata(pdev, priv->dev);

	/* Custom initialisation */
	if (priv->plat->init) {
		ret = priv->plat->init(pdev);
		if (unlikely(ret))
			goto out_unmap;
	}

	pr_debug("STMMAC platform driver registration completed");

	return 0;

out_unmap:
	iounmap(addr);
	platform_set_drvdata(pdev, NULL);

out_release_region:
	release_mem_region(res->start, resource_size(res));

	return ret;
}
Ejemplo n.º 16
0
/**
 * stmmac_pltfr_probe
 * @pdev: platform device pointer
 * Description: platform_device probe function. It allocates
 * the necessary resources and invokes the main to init
 * the net device, register the mdio bus etc.
 */
static int stmmac_pltfr_probe(struct platform_device *pdev)
{
	int ret = 0;
	struct resource *res;
	struct device *dev = &pdev->dev;
	void __iomem *addr = NULL;
	struct stmmac_priv *priv = NULL;
	struct plat_stmmacenet_data *plat_dat = NULL;
	const char *mac = NULL;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res)
		return -ENODEV;

	addr = devm_ioremap_resource(dev, res);
	if (IS_ERR(addr))
		return PTR_ERR(addr);

	if (pdev->dev.of_node) {
		plat_dat = devm_kzalloc(&pdev->dev,
					sizeof(struct plat_stmmacenet_data),
					GFP_KERNEL);
		if (!plat_dat) {
			pr_err("%s: ERROR: no memory", __func__);
			return  -ENOMEM;
		}

		ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
		if (ret) {
			pr_err("%s: main dt probe failed", __func__);
			return ret;
		}
	} else {
		plat_dat = pdev->dev.platform_data;
	}

	/* Custom initialisation (if needed)*/
	if (plat_dat->init) {
		ret = plat_dat->init(pdev);
		if (unlikely(ret))
			return ret;
	}

	gmac_clk_init(&(pdev->dev));

	priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
	if (!priv) {
		pr_err("%s: main driver probe failed", __func__);
		return -ENODEV;
	}


	/* Get MAC address if available (DT) */
	if (mac)
		memcpy(priv->dev->dev_addr, mac, ETH_ALEN);

	/* Get the MAC information */
	priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
	if (priv->dev->irq == -ENXIO) {
		pr_err("%s: ERROR: MAC IRQ configuration "
		       "information not found\n", __func__);
		return -ENXIO;
	}

	/*
	 * On some platforms e.g. SPEAr the wake up irq differs from the mac irq
	 * The external wake up irq can be passed through the platform code
	 * named as "eth_wake_irq"
	 *
	 * In case the wake up interrupt is not passed from the platform
	 * so the driver will continue to use the mac irq (ndev->irq)
	 */
	priv->wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
	if (priv->wol_irq == -ENXIO)
		priv->wol_irq = priv->dev->irq;

	priv->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");

	platform_set_drvdata(pdev, priv->dev);

	pr_debug("STMMAC platform driver registration completed");

	return 0;
}
Ejemplo n.º 17
0
static int sun7i_gmac_probe(struct platform_device *pdev)
{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	struct sunxi_priv_data *gmac;
	struct device *dev = &pdev->dev;
	int ret;

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
		return ret;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
		return PTR_ERR(plat_dat);

	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
	if (!gmac) {
		ret = -ENOMEM;
		goto err_remove_config_dt;
	}

	gmac->interface = of_get_phy_mode(dev->of_node);

	gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx");
	if (IS_ERR(gmac->tx_clk)) {
		dev_err(dev, "could not get tx clock\n");
		ret = PTR_ERR(gmac->tx_clk);
		goto err_remove_config_dt;
	}

	/* Optional regulator for PHY */
	gmac->regulator = devm_regulator_get_optional(dev, "phy");
	if (IS_ERR(gmac->regulator)) {
		if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER) {
			ret = -EPROBE_DEFER;
			goto err_remove_config_dt;
		}
		dev_info(dev, "no regulator found\n");
		gmac->regulator = NULL;
	}

	/* platform data specifying hardware features and callbacks.
	 * hardware features were copied from Allwinner drivers. */
	plat_dat->tx_coe = 1;
	plat_dat->has_gmac = true;
	plat_dat->bsp_priv = gmac;
	plat_dat->init = sun7i_gmac_init;
	plat_dat->exit = sun7i_gmac_exit;
	plat_dat->fix_mac_speed = sun7i_fix_speed;

	ret = sun7i_gmac_init(pdev, plat_dat->bsp_priv);
	if (ret)
		goto err_remove_config_dt;

	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
	if (ret)
		goto err_gmac_exit;

	return 0;

err_gmac_exit:
	sun7i_gmac_exit(pdev, plat_dat->bsp_priv);
err_remove_config_dt:
	stmmac_remove_config_dt(pdev, plat_dat);

	return ret;
}