void OpenDCCCtrlDlg::OnTimer(wxTimerEvent& event) {
if( !MutexOp.trywait( m_TimerMutex, 100 ) ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "timeout on timer mutex!" );
return;
}
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "timer tick..." );
/*
if( m_bStartUpProgress ) {
m_bStartUpProgress = false;
m_TimerCount = 0;
sendGet(so_version);
startProgress();
MutexOp.post( m_TimerMutex );
return;
}
*/
if( m_bCleanUpProgress ) {
if( m_Progress != NULL ) {
m_Timer->Stop();
wxProgressDialog* dlg = m_Progress;
m_Progress = NULL;
dlg->EndModal(0);
dlg->Destroy();
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "cleaned up the progress dialog" );
}
m_bCleanUpProgress = false;
MutexOp.post( m_TimerMutex );
return;
}
m_TimerCount++;
if( m_TimerCount >= 1000 ) {
TraceOp.trc( "opendcc", TRCLEVEL_WARNING, __LINE__, 9999, "timeout on SO acknowledge" );
stopProgress();
}
else if( m_Progress != NULL && !m_bCleanUpProgress ) {
if( m_Progress->IsShownOnScreen() ) {
if( !m_Progress->Pulse() ) {
m_Timer->Stop();
stopProgress();
m_TimerCount = 1000;
}
else {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "timer for SO acknowledge" );
bool rc = m_Timer->Start( 1000, wxTIMER_ONE_SHOT );
}
}
}
MutexOp.post( m_TimerMutex );
}
void ProgressBar::restartProgress()
{
VC3 tmp = this->progressPosition;
float tmp2 = this->progressAngle;
stopProgress();
startProgress(this->unit, tmp, tmp2);
}
ProgressBar::~ProgressBar()
{
// NOTE: ProgressBarActor handles visualization deletion?
if (isProgressing())
{
stopProgress();
}
}
void OGL_StopProgress()
{
stopProgress();
/*
show_ogl_progress = false;
if (OGL_LoadScreen::instance()->Use()) {
OGL_LoadScreen::instance()->Stop();
}
else{
close_progress_dialog();
}
*/
}
QueryModel::QueryModel(CorpusPtr corpus, QObject *parent)
:
QAbstractTableModel(parent),
d_corpus(corpus),
d_entryCache(new EntryCache()),
d_timer(new QTimer)
{
connect(this, SIGNAL(queryEntryFound(QString)),
SLOT(mapperEntryFound(QString)));
connect(this, SIGNAL(queryFinished(int, int, QString, QString, bool, bool)),
SLOT(finalizeQuery(int, int, QString, QString, bool, bool)));
// Timer for progress updates.
connect(d_timer.data(), SIGNAL(timeout()),
SLOT(updateProgress()));
connect(this, SIGNAL(queryStopped(int, int)),
SLOT(stopProgress()));
connect(this, SIGNAL(queryFinished(int, int, QString, QString, bool, bool)),
SLOT(stopProgress()));
connect(this, SIGNAL(queryFailed(QString)),
SLOT(stopProgress()));
}
void OpenDCCCtrlDlg::evaluateGet( int so, int value ) {
m_soValue[so] = value;
if( so == so_version ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "version = %d.%d", value/100, value%100 );
m_Version->SetValue( wxString::Format(_T("%d.%d"), value/100, value%100) );
sendGet( so_bps );
}
else if( so == so_bps ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "baudrate = %d", value );
/*
* Attention:
* OpenDCC provides the baudrate values for read
* depending on the selected protocol for communication.
* The Dialog is using p50x values, so if XpressNet (Lenz)
* protocol is selected the baudrate values must be
* converted to Intellibox p50x values.
*/
if( m_bLenz ) {
/*
lenz
0: 9600 Baud
1: 19200 Baud (default)
2: 38400 Baud
3: 57600 Baud
4: 115200 Baud
5: 2400 Baud
6: 4800 Baud
p50x
0: 2400 Baud
1: 4800 Baud
2: 9600 Baud
3: 19200 Baud
4: 38400 Baud
5: 57600 Baud
6: 115200 Baud
*/
/* The dialog is using p50x values, so convert lenz to p50x */
switch( value ) {
case 0: value = 2; break;
case 1: value = 3; break;
case 2: value = 4; break;
case 3: value = 5; break;
case 4: value = 6; break;
case 5: value = 0; break;
case 6: value = 1; break;
}
}
m_Baudrate->SetSelection(value);
sendGet( so_mode );
}
else if( so == so_mode ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "opendcc mode = %d", value );
m_Mode->SetValue( value & 0x01 ? _T("Xpressnet"):_T("Standard") );
m_Clock->SetValue(value & 0x10 ? true:false);
iONode opendccini = wDigInt.getopendcc(m_Props);
wOpenDCC.setfastclock(opendccini, value & 0x10 ? True:False);
m_OpenDCCmode = value;
sendGet( so_dcc_format );
}
else if( so == so_dcc_format ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "dcc format = %d", value );
/*
0: DCC mit 14 Fahrstufen
1: reserviert (DCC mit 27 Fahrstufen, nicht implementiert)
2: DCC mit 28 Fahrstufen (Voreinstellung)
3: DCC mit 128 Fahrstufen (bzw. 126, um genau zu sein)
*/
m_DecSpeedSteps->SetSelection(value);
sendGet( so_bidi );
}
else if( so == so_bidi ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "bidi = %d", value );
m_BiDiCutOut->SetValue(value&0x01?true:false);
m_BiDiIdNotify->SetValue(value&0x02?true:false);
m_BiDiAccQuery->SetValue(value&0x04?true:false);
sendGet( so_s88_timing );
}
else if( so == so_s88_timing ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "s88 timing = %d", value );
m_S88Timing->SetValue(value);
sendGet( so_s88_bus1 );
}
else if( so == so_s88_bus1 ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "s88 bus1 = %d", value );
m_S88Bus1->SetValue(value);
sendGet( so_s88_bus2 );
}
else if( so == so_s88_bus2 ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "s88 bus2 = %d", value );
m_S88Bus2->SetValue(value);
sendGet( so_s88_bus3 );
}
else if( so == so_s88_bus3 ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "s88 bus3 = %d", value );
m_S88Bus3->SetValue(value);
sendGet( so_s88_mode );
}
else if( so == so_s88_mode ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "s88 mode = %d", value );
m_S88Active->SetValue( (value&0x01) ? true:false );
m_S88TurnoutSensors->SetValue( (value&0x02) ? true:false );
sendGet( so_pt_resets );
}
else if( so == so_pt_resets ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "pt resets = %d", value );
m_PTResets->SetValue( value );
sendGet( so_pt_commands );
}
else if( so == so_pt_commands ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "pt commands = %d", value );
m_PTCommands->SetValue( value );
sendGet( so_pt_pom );
}
else if( so == so_pt_pom ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "pt pom = %d", value );
m_PTPOMrepeat->SetValue( value );
sendGet( so_scd_main );
}
else if( so == so_scd_main ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "scd main = %d", value );
m_SCTimeMain->SetValue( value );
sendGet( so_scd_pt );
}
else if( so == so_scd_pt ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "scd pt = %d", value );
m_SCTimePT->SetValue( value );
sendGet( so_sw_invert );
}
else if( so == so_sw_invert ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "sw invert = %d", value );
m_SwitchInvert->SetValue( (value&0x01) ? true:false );
sendGet( so_sw_commands );
}
else if( so == so_sw_commands ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "sw commands = %d", value );
m_SwitchCommands->SetValue( value );
sendGet( so_sw_time );
}
else if( so == so_sw_time ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "sw time = %d", value );
m_SwitchTime->SetValue( value );
sendGet( so_sw_sensor_offset );
}
else if( so == so_sw_sensor_offset ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "sw sensor offset = %d", value );
m_SwitchSensorOffset->SetValue( value );
sendGet( so_sw_sensor_mode );
}
else if( so == so_sw_sensor_mode ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "sw sensor mode = %d", value );
m_SwitchSensorMode->SetSelection( value );
sendGet( so_serial_number );
}
else if( so == so_serial_number ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "serial number = %d", value );
m_SerialNumber->SetValue( value );
sendGet( so_xpn_feedback_mapping );
}
else if( so == so_xpn_feedback_mapping ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "xpn feedback mapping = %d", value );
m_XpnFeedbackMapping->SetSelection( value );
sendGet( so_xpn_sensors );
}
else if( so == so_xpn_sensors ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "xpn sensors = %d", value );
m_XpressNetSensors->SetValue( value );
sendGet( so_loco_format_low );
}
// TODO: get list of loco decoder exceptions
// 64 pairs starting with: so_loco_format_low, so_loco_format_high
else if( so >= so_loco_format_low && so <= so_loco_format_high + 64*2 ) {
TraceOp.trc( "opendcc", TRCLEVEL_INFO, __LINE__, 9999, "loco format %d = %d", so, value );
if( m_OpenDCCmode & mode_type_xpr ) {
/* TODO: handle mode_type_xpr database */
stopProgress();
}
else {
if( so % 2 == 1) {
int index = ( so - so_loco_format_low ) / 2;
int locoFormatLow = m_soValue[so-1];
int locoFormatHigh = m_soValue[so];
int address = locoFormatLow + ((locoFormatHigh & 0x3F) << 8);
int format = (locoFormatHigh & 0xC0) >> 6;
if( address > 0 ) {
m_DecExceptions->InsertItem( index, wxString::Format(_T("%d"), address));
if( format == 0 )
m_DecExceptions->SetItem( index, 1, _T("DCC 14"));
else if( format == 1 )
m_DecExceptions->SetItem( index, 1, _T("DCC 27"));
else if( format == 2 )
m_DecExceptions->SetItem( index, 1, _T("DCC 28"));
else if( format == 3 )
m_DecExceptions->SetItem( index, 1, _T("DCC 128"));
else
m_DecExceptions->SetItem( index, 1, _T("DCC ???"));
if( index < 64 )
sendGet( so + 1 );
else
stopProgress();
}
else {
stopProgress();
}
}
else
