static void vexpress_a9_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
CPUState *env = NULL;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *lowram = g_new(MemoryRegion, 1);
MemoryRegion *vram = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
MemoryRegion *hackram = g_new(MemoryRegion, 1);
DeviceState *dev, *sysctl, *pl041;
SysBusDevice *busdev;
qemu_irq *irqp;
qemu_irq pic[64];
int n;
qemu_irq cpu_irq[4];
uint32_t proc_id;
uint32_t sys_id;
ram_addr_t low_ram_size, vram_size, sram_size;
if (!cpu_model) {
cpu_model = "cortex-a9";
}
for (n = 0; n < smp_cpus; n++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
irqp = arm_pic_init_cpu(env);
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
}
if (ram_size > 0x40000000) {
/* 1GB is the maximum the address space permits */
fprintf(stderr, "vexpress: cannot model more than 1GB RAM\n");
exit(1);
}
memory_region_init_ram(ram, "vexpress.highmem", ram_size);
vmstate_register_ram_global(ram);
low_ram_size = ram_size;
if (low_ram_size > 0x4000000) {
low_ram_size = 0x4000000;
}
/* RAM is from 0x60000000 upwards. The bottom 64MB of the
* address space should in theory be remappable to various
* things including ROM or RAM; we always map the RAM there.
*/
memory_region_init_alias(lowram, "vexpress.lowmem", ram, 0, low_ram_size);
memory_region_add_subregion(sysmem, 0x0, lowram);
memory_region_add_subregion(sysmem, 0x60000000, ram);
/* 0x1e000000 A9MPCore (SCU) private memory region */
dev = qdev_create(NULL, "a9mpcore_priv");
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
vexpress_binfo.smp_priv_base = 0x1e000000;
sysbus_mmio_map(busdev, 0, vexpress_binfo.smp_priv_base);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
/* Interrupts [42:0] are from the motherboard;
* [47:43] are reserved; [63:48] are daughterboard
* peripherals. Note that some documentation numbers
* external interrupts starting from 32 (because the
* A9MP has internal interrupts 0..31).
*/
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
/* Motherboard peripherals CS7 : 0x10000000 .. 0x10020000 */
sys_id = 0x1190f500;
proc_id = 0x0c000191;
/* 0x10000000 System registers */
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_init_nofail(sysctl);
qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
/* 0x10001000 SP810 system control */
/* 0x10002000 serial bus PCI */
/* 0x10004000 PL041 audio */
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
sysbus_mmio_map(sysbus_from_qdev(pl041), 0, 0x10004000);
sysbus_connect_irq(sysbus_from_qdev(pl041), 0, pic[11]);
dev = sysbus_create_varargs("pl181", 0x10005000, pic[9], pic[10], NULL);
/* Wire up MMC card detect and read-only signals */
qdev_connect_gpio_out(dev, 0,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT));
qdev_connect_gpio_out(dev, 1,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN));
sysbus_create_simple("pl050_keyboard", 0x10006000, pic[12]);
sysbus_create_simple("pl050_mouse", 0x10007000, pic[13]);
sysbus_create_simple("pl011", 0x10009000, pic[5]);
sysbus_create_simple("pl011", 0x1000a000, pic[6]);
sysbus_create_simple("pl011", 0x1000b000, pic[7]);
sysbus_create_simple("pl011", 0x1000c000, pic[8]);
/* 0x1000f000 SP805 WDT */
sysbus_create_simple("sp804", 0x10011000, pic[2]);
sysbus_create_simple("sp804", 0x10012000, pic[3]);
/* 0x10016000 Serial Bus DVI */
sysbus_create_simple("pl031", 0x10017000, pic[4]); /* RTC */
/* 0x1001a000 Compact Flash */
/* 0x1001f000 PL111 CLCD (motherboard) */
/* Daughterboard peripherals : 0x10020000 .. 0x20000000 */
/* 0x10020000 PL111 CLCD (daughterboard) */
sysbus_create_simple("pl111", 0x10020000, pic[44]);
/* 0x10060000 AXI RAM */
/* 0x100e0000 PL341 Dynamic Memory Controller */
/* 0x100e1000 PL354 Static Memory Controller */
/* 0x100e2000 System Configuration Controller */
sysbus_create_simple("sp804", 0x100e4000, pic[48]);
/* 0x100e5000 SP805 Watchdog module */
/* 0x100e6000 BP147 TrustZone Protection Controller */
/* 0x100e9000 PL301 'Fast' AXI matrix */
/* 0x100ea000 PL301 'Slow' AXI matrix */
/* 0x100ec000 TrustZone Address Space Controller */
/* 0x10200000 CoreSight debug APB */
/* 0x1e00a000 PL310 L2 Cache Controller */
sysbus_create_varargs("l2x0", 0x1e00a000, NULL);
/* CS0: NOR0 flash : 0x40000000 .. 0x44000000 */
/* CS4: NOR1 flash : 0x44000000 .. 0x48000000 */
/* CS2: SRAM : 0x48000000 .. 0x4a000000 */
sram_size = 0x2000000;
memory_region_init_ram(sram, "vexpress.sram", sram_size);
vmstate_register_ram_global(sram);
memory_region_add_subregion(sysmem, 0x48000000, sram);
/* CS3: USB, ethernet, VRAM : 0x4c000000 .. 0x50000000 */
/* 0x4c000000 Video RAM */
vram_size = 0x800000;
memory_region_init_ram(vram, "vexpress.vram", vram_size);
vmstate_register_ram_global(vram);
memory_region_add_subregion(sysmem, 0x4c000000, vram);
/* 0x4e000000 LAN9118 Ethernet */
if (nd_table[0].vlan) {
lan9118_init(&nd_table[0], 0x4e000000, pic[15]);
}
/* 0x4f000000 ISP1761 USB */
/* ??? Hack to map an additional page of ram for the secondary CPU
startup code. I guess this works on real hardware because the
BootROM happens to be in ROM/flash or in memory that isn't clobbered
until after Linux boots the secondary CPUs. */
memory_region_init_ram(hackram, "vexpress.hack", 0x1000);
vmstate_register_ram_global(hackram);
memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, hackram);
vexpress_binfo.ram_size = ram_size;
vexpress_binfo.kernel_filename = kernel_filename;
vexpress_binfo.kernel_cmdline = kernel_cmdline;
vexpress_binfo.initrd_filename = initrd_filename;
vexpress_binfo.nb_cpus = smp_cpus;
vexpress_binfo.board_id = VEXPRESS_BOARD_ID;
vexpress_binfo.loader_start = 0x60000000;
arm_load_kernel(first_cpu, &vexpress_binfo);
}
static void vexpress_common_init(VEDBoardInfo *daughterboard,
QEMUMachineInitArgs *args)
{
DeviceState *dev, *sysctl, *pl041;
qemu_irq pic[64];
uint32_t sys_id;
DriveInfo *dinfo;
pflash_t *pflash0;
ram_addr_t vram_size, sram_size;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *vram = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
MemoryRegion *flashalias = g_new(MemoryRegion, 1);
MemoryRegion *flash0mem;
const hwaddr *map = daughterboard->motherboard_map;
int i;
daughterboard->init(daughterboard, args->ram_size, args->cpu_model, pic);
/* Motherboard peripherals: the wiring is the same but the
* addresses vary between the legacy and A-Series memory maps.
*/
sys_id = 0x1190f500;
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_prop_set_uint32(sysctl, "proc_id", daughterboard->proc_id);
qdev_prop_set_uint32(sysctl, "len-db-voltage",
daughterboard->num_voltage_sensors);
for (i = 0; i < daughterboard->num_voltage_sensors; i++) {
char *propname = g_strdup_printf("db-voltage[%d]", i);
qdev_prop_set_uint32(sysctl, propname, daughterboard->voltages[i]);
g_free(propname);
}
qdev_prop_set_uint32(sysctl, "len-db-clock",
daughterboard->num_clocks);
for (i = 0; i < daughterboard->num_clocks; i++) {
char *propname = g_strdup_printf("db-clock[%d]", i);
qdev_prop_set_uint32(sysctl, propname, daughterboard->clocks[i]);
g_free(propname);
}
qdev_init_nofail(sysctl);
sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, map[VE_SYSREGS]);
/* VE_SP810: not modelled */
/* VE_SERIALPCI: not modelled */
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, map[VE_PL041]);
sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[11]);
dev = sysbus_create_varargs("pl181", map[VE_MMCI], pic[9], pic[10], NULL);
/* Wire up MMC card detect and read-only signals */
qdev_connect_gpio_out(dev, 0,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT));
qdev_connect_gpio_out(dev, 1,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN));
sysbus_create_simple("pl050_keyboard", map[VE_KMI0], pic[12]);
sysbus_create_simple("pl050_mouse", map[VE_KMI1], pic[13]);
sysbus_create_simple("pl011", map[VE_UART0], pic[5]);
sysbus_create_simple("pl011", map[VE_UART1], pic[6]);
sysbus_create_simple("pl011", map[VE_UART2], pic[7]);
sysbus_create_simple("pl011", map[VE_UART3], pic[8]);
sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]);
sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]);
/* VE_SERIALDVI: not modelled */
sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */
/* VE_COMPACTFLASH: not modelled */
sysbus_create_simple("pl111", map[VE_CLCD], pic[14]);
dinfo = drive_get_next(IF_PFLASH);
pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0",
dinfo);
if (!pflash0) {
fprintf(stderr, "vexpress: error registering flash 0.\n");
exit(1);
}
if (map[VE_NORFLASHALIAS] != -1) {
/* Map flash 0 as an alias into low memory */
flash0mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(pflash0), 0);
memory_region_init_alias(flashalias, NULL, "vexpress.flashalias",
flash0mem, 0, VEXPRESS_FLASH_SIZE);
memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], flashalias);
}
dinfo = drive_get_next(IF_PFLASH);
if (!ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1",
dinfo)) {
fprintf(stderr, "vexpress: error registering flash 1.\n");
exit(1);
}
sram_size = 0x2000000;
memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size);
vmstate_register_ram_global(sram);
memory_region_add_subregion(sysmem, map[VE_SRAM], sram);
vram_size = 0x800000;
memory_region_init_ram(vram, NULL, "vexpress.vram", vram_size);
vmstate_register_ram_global(vram);
memory_region_add_subregion(sysmem, map[VE_VIDEORAM], vram);
/* 0x4e000000 LAN9118 Ethernet */
if (nd_table[0].used) {
lan9118_init(&nd_table[0], map[VE_ETHERNET], pic[15]);
}
/* VE_USB: not modelled */
/* VE_DAPROM: not modelled */
/* Create mmio transports, so the user can create virtio backends
* (which will be automatically plugged in to the transports). If
* no backend is created the transport will just sit harmlessly idle.
*/
for (i = 0; i < NUM_VIRTIO_TRANSPORTS; i++) {
sysbus_create_simple("virtio-mmio", map[VE_VIRTIO] + 0x200 * i,
pic[40 + i]);
}
daughterboard->bootinfo.ram_size = args->ram_size;
daughterboard->bootinfo.kernel_filename = args->kernel_filename;
daughterboard->bootinfo.kernel_cmdline = args->kernel_cmdline;
daughterboard->bootinfo.initrd_filename = args->initrd_filename;
daughterboard->bootinfo.nb_cpus = smp_cpus;
daughterboard->bootinfo.board_id = VEXPRESS_BOARD_ID;
daughterboard->bootinfo.loader_start = daughterboard->loader_start;
daughterboard->bootinfo.smp_loader_start = map[VE_SRAM];
daughterboard->bootinfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
daughterboard->bootinfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr;
daughterboard->bootinfo.modify_dtb = vexpress_modify_dtb;
arm_load_kernel(ARM_CPU(first_cpu), &daughterboard->bootinfo);
}
static void bamboo_init(QEMUMachineInitArgs *args)
{
ram_addr_t ram_size = args->ram_size;
const char *cpu_model = args->cpu_model;
const char *kernel_filename = args->kernel_filename;
const char *kernel_cmdline = args->kernel_cmdline;
const char *initrd_filename = args->initrd_filename;
unsigned int pci_irq_nrs[4] = { 28, 27, 26, 25 };
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *isa = g_new(MemoryRegion, 1);
MemoryRegion *ram_memories
= g_malloc(PPC440EP_SDRAM_NR_BANKS * sizeof(*ram_memories));
hwaddr ram_bases[PPC440EP_SDRAM_NR_BANKS];
hwaddr ram_sizes[PPC440EP_SDRAM_NR_BANKS];
qemu_irq *pic;
qemu_irq *irqs;
PCIBus *pcibus;
PowerPCCPU *cpu;
CPUPPCState *env;
uint64_t elf_entry;
uint64_t elf_lowaddr;
hwaddr loadaddr = 0;
target_long initrd_size = 0;
DeviceState *dev;
int success;
int i;
/* Setup CPU. */
if (cpu_model == NULL) {
cpu_model = "440EP";
}
cpu = cpu_ppc_init(cpu_model);
if (cpu == NULL) {
fprintf(stderr, "Unable to initialize CPU!\n");
exit(1);
}
env = &cpu->env;
qemu_register_reset(main_cpu_reset, cpu);
ppc_booke_timers_init(cpu, 400000000, 0);
ppc_dcr_init(env, NULL, NULL);
/* interrupt controller */
irqs = g_malloc0(sizeof(qemu_irq) * PPCUIC_OUTPUT_NB);
irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT];
irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT];
pic = ppcuic_init(env, irqs, 0x0C0, 0, 1);
/* SDRAM controller */
memset(ram_bases, 0, sizeof(ram_bases));
memset(ram_sizes, 0, sizeof(ram_sizes));
ram_size = ppc4xx_sdram_adjust(ram_size, PPC440EP_SDRAM_NR_BANKS,
ram_memories,
ram_bases, ram_sizes,
ppc440ep_sdram_bank_sizes);
/* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */
ppc4xx_sdram_init(env, pic[14], PPC440EP_SDRAM_NR_BANKS, ram_memories,
ram_bases, ram_sizes, 1);
/* PCI */
dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST_BRIDGE,
PPC440EP_PCI_CONFIG,
pic[pci_irq_nrs[0]], pic[pci_irq_nrs[1]],
pic[pci_irq_nrs[2]], pic[pci_irq_nrs[3]],
NULL);
pcibus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
if (!pcibus) {
fprintf(stderr, "couldn't create PCI controller!\n");
exit(1);
}
memory_region_init_alias(isa, NULL, "isa_mmio",
get_system_io(), 0, PPC440EP_PCI_IOLEN);
memory_region_add_subregion(get_system_memory(), PPC440EP_PCI_IO, isa);
if (serial_hds[0] != NULL) {
serial_mm_init(address_space_mem, 0xef600300, 0, pic[0],
PPC_SERIAL_MM_BAUDBASE, serial_hds[0],
DEVICE_BIG_ENDIAN);
}
if (serial_hds[1] != NULL) {
serial_mm_init(address_space_mem, 0xef600400, 0, pic[1],
PPC_SERIAL_MM_BAUDBASE, serial_hds[1],
DEVICE_BIG_ENDIAN);
}
if (pcibus) {
/* Register network interfaces. */
for (i = 0; i < nb_nics; i++) {
/* There are no PCI NICs on the Bamboo board, but there are
* PCI slots, so we can pick whatever default model we want. */
pci_nic_init_nofail(&nd_table[i], pcibus, "e1000", NULL);
}
}
/* Load kernel. */
if (kernel_filename) {
success = load_uimage(kernel_filename, &entry, &loadaddr, NULL);
if (success < 0) {
success = load_elf(kernel_filename, NULL, NULL, &elf_entry,
&elf_lowaddr, NULL, 1, ELF_MACHINE, 0);
entry = elf_entry;
loadaddr = elf_lowaddr;
}
/* XXX try again as binary */
if (success < 0) {
fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
}
/* Load initrd. */
if (initrd_filename) {
initrd_size = load_image_targphys(initrd_filename, RAMDISK_ADDR,
ram_size - RAMDISK_ADDR);
if (initrd_size < 0) {
fprintf(stderr, "qemu: could not load ram disk '%s' at %x\n",
initrd_filename, RAMDISK_ADDR);
exit(1);
}
}
/* If we're loading a kernel directly, we must load the device tree too. */
if (kernel_filename) {
if (bamboo_load_device_tree(FDT_ADDR, ram_size, RAMDISK_ADDR,
initrd_size, kernel_cmdline) < 0) {
fprintf(stderr, "couldn't load device tree\n");
exit(1);
}
}
if (kvm_enabled())
kvmppc_init();
}
Exynos4210State *exynos4210_init(MemoryRegion *system_mem)
{
Exynos4210State *s = g_new(Exynos4210State, 1);
qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS];
SysBusDevice *busdev;
DeviceState *dev;
int i, n;
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
Object *cpuobj = object_new(ARM_CPU_TYPE_NAME("cortex-a9"));
/* By default A9 CPUs have EL3 enabled. This board does not currently
* support EL3 so the CPU EL3 property is disabled before realization.
*/
if (object_property_find(cpuobj, "has_el3", NULL)) {
object_property_set_bool(cpuobj, false, "has_el3", &error_fatal);
}
s->cpu[n] = ARM_CPU(cpuobj);
object_property_set_int(cpuobj, exynos4210_calc_affinity(n),
"mp-affinity", &error_abort);
object_property_set_int(cpuobj, EXYNOS4210_SMP_PRIVATE_BASE_ADDR,
"reset-cbar", &error_abort);
object_property_set_bool(cpuobj, true, "realized", &error_fatal);
}
/*** IRQs ***/
s->irq_table = exynos4210_init_irq(&s->irqs);
/* IRQ Gate */
for (i = 0; i < EXYNOS4210_NCPUS; i++) {
dev = qdev_create(NULL, "exynos4210.irq_gate");
qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS);
qdev_init_nofail(dev);
/* Get IRQ Gate input in gate_irq */
for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) {
gate_irq[i][n] = qdev_get_gpio_in(dev, n);
}
busdev = SYS_BUS_DEVICE(dev);
/* Connect IRQ Gate output to CPU's IRQ line */
sysbus_connect_irq(busdev, 0,
qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ));
}
/* Private memory region and Internal GIC */
dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV);
qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR);
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
sysbus_connect_irq(busdev, n, gate_irq[n][0]);
}
for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) {
s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n);
}
/* Cache controller */
sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL);
/* External GIC */
dev = qdev_create(NULL, "exynos4210.gic");
qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
/* Map CPU interface */
sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR);
/* Map Distributer interface */
sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR);
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
sysbus_connect_irq(busdev, n, gate_irq[n][1]);
}
for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) {
s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n);
}
/* Internal Interrupt Combiner */
dev = qdev_create(NULL, "exynos4210.combiner");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]);
}
exynos4210_combiner_get_gpioin(&s->irqs, dev, 0);
sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR);
/* External Interrupt Combiner */
dev = qdev_create(NULL, "exynos4210.combiner");
qdev_prop_set_uint32(dev, "external", 1);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]);
}
exynos4210_combiner_get_gpioin(&s->irqs, dev, 1);
sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR);
/* Initialize board IRQs. */
exynos4210_init_board_irqs(&s->irqs);
/*** Memory ***/
/* Chip-ID and OMR */
memory_region_init_io(&s->chipid_mem, NULL, &exynos4210_chipid_and_omr_ops,
NULL, "exynos4210.chipid", sizeof(chipid_and_omr));
memory_region_add_subregion(system_mem, EXYNOS4210_CHIPID_ADDR,
&s->chipid_mem);
/* Internal ROM */
memory_region_init_ram(&s->irom_mem, NULL, "exynos4210.irom",
EXYNOS4210_IROM_SIZE, &error_fatal);
memory_region_set_readonly(&s->irom_mem, true);
memory_region_add_subregion(system_mem, EXYNOS4210_IROM_BASE_ADDR,
&s->irom_mem);
/* mirror of iROM */
memory_region_init_alias(&s->irom_alias_mem, NULL, "exynos4210.irom_alias",
&s->irom_mem,
0,
EXYNOS4210_IROM_SIZE);
memory_region_set_readonly(&s->irom_alias_mem, true);
memory_region_add_subregion(system_mem, EXYNOS4210_IROM_MIRROR_BASE_ADDR,
&s->irom_alias_mem);
/* Internal RAM */
memory_region_init_ram(&s->iram_mem, NULL, "exynos4210.iram",
EXYNOS4210_IRAM_SIZE, &error_fatal);
memory_region_add_subregion(system_mem, EXYNOS4210_IRAM_BASE_ADDR,
&s->iram_mem);
/* PMU.
* The only reason of existence at the moment is that secondary CPU boot
* loader uses PMU INFORM5 register as a holding pen.
*/
sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL);
sysbus_create_simple("exynos4210.clk", EXYNOS4210_CLK_BASE_ADDR, NULL);
sysbus_create_simple("exynos4210.rng", EXYNOS4210_RNG_BASE_ADDR, NULL);
/* PWM */
sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR,
s->irq_table[exynos4210_get_irq(22, 0)],
s->irq_table[exynos4210_get_irq(22, 1)],
s->irq_table[exynos4210_get_irq(22, 2)],
s->irq_table[exynos4210_get_irq(22, 3)],
s->irq_table[exynos4210_get_irq(22, 4)],
NULL);
/* RTC */
sysbus_create_varargs("exynos4210.rtc", EXYNOS4210_RTC_BASE_ADDR,
s->irq_table[exynos4210_get_irq(23, 0)],
s->irq_table[exynos4210_get_irq(23, 1)],
NULL);
/* Multi Core Timer */
dev = qdev_create(NULL, "exynos4210.mct");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < 4; n++) {
/* Connect global timer interrupts to Combiner gpio_in */
sysbus_connect_irq(busdev, n,
s->irq_table[exynos4210_get_irq(1, 4 + n)]);
}
/* Connect local timer interrupts to Combiner gpio_in */
sysbus_connect_irq(busdev, 4,
s->irq_table[exynos4210_get_irq(51, 0)]);
sysbus_connect_irq(busdev, 5,
s->irq_table[exynos4210_get_irq(35, 3)]);
sysbus_mmio_map(busdev, 0, EXYNOS4210_MCT_BASE_ADDR);
/*** I2C ***/
for (n = 0; n < EXYNOS4210_I2C_NUMBER; n++) {
uint32_t addr = EXYNOS4210_I2C_BASE_ADDR + EXYNOS4210_I2C_SHIFT * n;
qemu_irq i2c_irq;
if (n < 8) {
i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_I2C_INTG, n)];
} else {
i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_HDMI_INTG, 1)];
}
dev = qdev_create(NULL, "exynos4210.i2c");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(busdev, 0, i2c_irq);
sysbus_mmio_map(busdev, 0, addr);
s->i2c_if[n] = (I2CBus *)qdev_get_child_bus(dev, "i2c");
}
/*** UARTs ***/
exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
EXYNOS4210_UART0_FIFO_SIZE, 0, serial_hd(0),
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]);
exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR,
EXYNOS4210_UART1_FIFO_SIZE, 1, serial_hd(1),
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]);
exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR,
EXYNOS4210_UART2_FIFO_SIZE, 2, serial_hd(2),
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]);
exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR,
EXYNOS4210_UART3_FIFO_SIZE, 3, serial_hd(3),
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]);
/*** SD/MMC host controllers ***/
for (n = 0; n < EXYNOS4210_SDHCI_NUMBER; n++) {
DeviceState *carddev;
BlockBackend *blk;
DriveInfo *di;
/* Compatible with:
* - SD Host Controller Specification Version 2.0
* - SDIO Specification Version 2.0
* - MMC Specification Version 4.3
* - SDMA
* - ADMA2
*
* As this part of the Exynos4210 is not publically available,
* we used the "HS-MMC Controller S3C2416X RISC Microprocessor"
* public datasheet which is very similar (implementing
* MMC Specification Version 4.0 being the only difference noted)
*/
dev = qdev_create(NULL, TYPE_SYSBUS_SDHCI);
qdev_prop_set_uint64(dev, "capareg", EXYNOS4210_SDHCI_CAPABILITIES);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, EXYNOS4210_SDHCI_ADDR(n));
sysbus_connect_irq(busdev, 0, s->irq_table[exynos4210_get_irq(29, n)]);
di = drive_get(IF_SD, 0, n);
blk = di ? blk_by_legacy_dinfo(di) : NULL;
carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD_CARD);
qdev_prop_set_drive(carddev, "drive", blk, &error_abort);
qdev_init_nofail(carddev);
}
/*** Display controller (FIMD) ***/
sysbus_create_varargs("exynos4210.fimd", EXYNOS4210_FIMD0_BASE_ADDR,
s->irq_table[exynos4210_get_irq(11, 0)],
s->irq_table[exynos4210_get_irq(11, 1)],
s->irq_table[exynos4210_get_irq(11, 2)],
NULL);
sysbus_create_simple(TYPE_EXYNOS4210_EHCI, EXYNOS4210_EHCI_BASE_ADDR,
s->irq_table[exynos4210_get_irq(28, 3)]);
return s;
}
static void zynq_init(QEMUMachineInitArgs *args)
{
ram_addr_t ram_size = args->ram_size;
const char *cpu_model = args->cpu_model;
const char *kernel_filename = args->kernel_filename;
const char *kernel_cmdline = args->kernel_cmdline;
const char *initrd_filename = args->initrd_filename;
ARMCPU *cpu;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *ext_ram = g_new(MemoryRegion, 1);
MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
DeviceState *dev;
SysBusDevice *busdev;
qemu_irq *irqp;
qemu_irq pic[64];
NICInfo *nd;
int n;
qemu_irq cpu_irq;
if (!cpu_model) {
cpu_model = "cortex-a9";
}
cpu = cpu_arm_init(cpu_model);
if (!cpu) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
irqp = arm_pic_init_cpu(cpu);
cpu_irq = irqp[ARM_PIC_CPU_IRQ];
/* max 2GB ram */
if (ram_size > 0x80000000) {
ram_size = 0x80000000;
}
/* DDR remapped to address zero. */
memory_region_init_ram(ext_ram, "zynq.ext_ram", ram_size);
vmstate_register_ram_global(ext_ram);
memory_region_add_subregion(address_space_mem, 0, ext_ram);
/* 256K of on-chip memory */
memory_region_init_ram(ocm_ram, "zynq.ocm_ram", 256 << 10);
vmstate_register_ram_global(ocm_ram);
memory_region_add_subregion(address_space_mem, 0xFFFC0000, ocm_ram);
DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0);
/* AMD */
pflash_cfi02_register(0xe2000000, NULL, "zynq.pflash", FLASH_SIZE,
dinfo ? dinfo->bdrv : NULL, FLASH_SECTOR_SIZE,
FLASH_SIZE/FLASH_SECTOR_SIZE, 1,
1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa,
0);
dev = qdev_create(NULL, "xilinx,zynq_slcr");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8000000);
dev = qdev_create(NULL, "a9mpcore_priv");
qdev_prop_set_uint32(dev, "num-cpu", 1);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xF8F00000);
sysbus_connect_irq(busdev, 0, cpu_irq);
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
zynq_init_spi_flashes(0xE0006000, pic[58-IRQ_OFFSET], false);
zynq_init_spi_flashes(0xE0007000, pic[81-IRQ_OFFSET], false);
zynq_init_spi_flashes(0xE000D000, pic[51-IRQ_OFFSET], true);
sysbus_create_simple("xlnx,ps7-usb", 0xE0002000, pic[53-IRQ_OFFSET]);
sysbus_create_simple("xlnx,ps7-usb", 0xE0003000, pic[76-IRQ_OFFSET]);
sysbus_create_simple("cadence_uart", 0xE0000000, pic[59-IRQ_OFFSET]);
sysbus_create_simple("cadence_uart", 0xE0001000, pic[82-IRQ_OFFSET]);
sysbus_create_varargs("cadence_ttc", 0xF8001000,
pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL);
sysbus_create_varargs("cadence_ttc", 0xF8002000,
pic[69-IRQ_OFFSET], pic[70-IRQ_OFFSET], pic[71-IRQ_OFFSET], NULL);
for (n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if (n == 0) {
gem_init(nd, 0xE000B000, pic[54-IRQ_OFFSET]);
} else if (n == 1) {
gem_init(nd, 0xE000C000, pic[77-IRQ_OFFSET]);
}
}
dev = qdev_create(NULL, "generic-sdhci");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0100000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[56-IRQ_OFFSET]);
dev = qdev_create(NULL, "generic-sdhci");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0101000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[79-IRQ_OFFSET]);
dev = qdev_create(NULL, "pl330");
qdev_prop_set_uint8(dev, "num_chnls", 8);
qdev_prop_set_uint8(dev, "num_periph_req", 4);
qdev_prop_set_uint8(dev, "num_events", 16);
qdev_prop_set_uint8(dev, "data_width", 64);
qdev_prop_set_uint8(dev, "wr_cap", 8);
qdev_prop_set_uint8(dev, "wr_q_dep", 16);
qdev_prop_set_uint8(dev, "rd_cap", 8);
qdev_prop_set_uint8(dev, "rd_q_dep", 16);
qdev_prop_set_uint16(dev, "data_buffer_dep", 256);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xF8003000);
sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */
for (n = 0; n < 8; ++n) { /* event irqs */
sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]);
}
zynq_binfo.ram_size = ram_size;
zynq_binfo.kernel_filename = kernel_filename;
zynq_binfo.kernel_cmdline = kernel_cmdline;
zynq_binfo.initrd_filename = initrd_filename;
zynq_binfo.nb_cpus = 1;
zynq_binfo.board_id = 0xd32;
zynq_binfo.loader_start = 0;
arm_load_kernel(arm_env_get_cpu(first_cpu), &zynq_binfo);
}
static void realview_init(QEMUMachineInitArgs *args,
enum realview_board_type board_type)
{
ARMCPU *cpu = NULL;
CPUARMState *env;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram_lo = g_new(MemoryRegion, 1);
MemoryRegion *ram_hi = g_new(MemoryRegion, 1);
MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
MemoryRegion *ram_hack = g_new(MemoryRegion, 1);
DeviceState *dev, *sysctl, *gpio2, *pl041;
SysBusDevice *busdev;
qemu_irq *irqp;
qemu_irq pic[64];
qemu_irq mmc_irq[2];
PCIBus *pci_bus;
NICInfo *nd;
i2c_bus *i2c;
int n;
int done_nic = 0;
qemu_irq cpu_irq[4];
int is_mpcore = 0;
int is_pb = 0;
uint32_t proc_id = 0;
uint32_t sys_id;
ram_addr_t low_ram_size;
ram_addr_t ram_size = args->ram_size;
switch (board_type) {
case BOARD_EB:
break;
case BOARD_EB_MPCORE:
is_mpcore = 1;
break;
case BOARD_PB_A8:
is_pb = 1;
break;
case BOARD_PBX_A9:
is_mpcore = 1;
is_pb = 1;
break;
}
for (n = 0; n < smp_cpus; n++) {
cpu = cpu_arm_init(args->cpu_model);
if (!cpu) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
irqp = arm_pic_init_cpu(cpu);
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
}
env = &cpu->env;
if (arm_feature(env, ARM_FEATURE_V7)) {
if (is_mpcore) {
proc_id = 0x0c000000;
} else {
proc_id = 0x0e000000;
}
} else if (arm_feature(env, ARM_FEATURE_V6K)) {
proc_id = 0x06000000;
} else if (arm_feature(env, ARM_FEATURE_V6)) {
proc_id = 0x04000000;
} else {
proc_id = 0x02000000;
}
if (is_pb && ram_size > 0x20000000) {
/* Core tile RAM. */
low_ram_size = ram_size - 0x20000000;
ram_size = 0x20000000;
memory_region_init_ram(ram_lo, "realview.lowmem", low_ram_size);
vmstate_register_ram_global(ram_lo);
memory_region_add_subregion(sysmem, 0x20000000, ram_lo);
}
memory_region_init_ram(ram_hi, "realview.highmem", ram_size);
vmstate_register_ram_global(ram_hi);
low_ram_size = ram_size;
if (low_ram_size > 0x10000000)
low_ram_size = 0x10000000;
/* SDRAM at address zero. */
memory_region_init_alias(ram_alias, "realview.alias",
ram_hi, 0, low_ram_size);
memory_region_add_subregion(sysmem, 0, ram_alias);
if (is_pb) {
/* And again at a high address. */
memory_region_add_subregion(sysmem, 0x70000000, ram_hi);
} else {
ram_size = low_ram_size;
}
sys_id = is_pb ? 0x01780500 : 0xc1400400;
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
qdev_init_nofail(sysctl);
sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000);
if (is_mpcore) {
hwaddr periphbase;
dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
if (is_pb) {
periphbase = 0x1f000000;
} else {
periphbase = 0x10100000;
}
sysbus_mmio_map(busdev, 0, periphbase);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL);
/* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */
realview_binfo.gic_cpu_if_addr = periphbase + 0x100;
} else {
uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
/* For now just create the nIRQ GIC, and ignore the others. */
dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);
}
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000);
sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[19]);
sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
sysbus_create_simple("pl011", 0x10009000, pic[12]);
sysbus_create_simple("pl011", 0x1000a000, pic[13]);
sysbus_create_simple("pl011", 0x1000b000, pic[14]);
sysbus_create_simple("pl011", 0x1000c000, pic[15]);
/* DMA controller is optional, apparently. */
sysbus_create_simple("pl081", 0x10030000, pic[24]);
sysbus_create_simple("sp804", 0x10011000, pic[4]);
sysbus_create_simple("sp804", 0x10012000, pic[5]);
sysbus_create_simple("pl061", 0x10013000, pic[6]);
sysbus_create_simple("pl061", 0x10014000, pic[7]);
gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]);
sysbus_create_simple("pl111", 0x10020000, pic[23]);
dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
/* Wire up MMC card detect and read-only signals. These have
* to go to both the PL061 GPIO and the sysctl register.
* Note that the PL181 orders these lines (readonly,inserted)
* and the PL061 has them the other way about. Also the card
* detect line is inverted.
*/
mmc_irq[0] = qemu_irq_split(
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT),
qdev_get_gpio_in(gpio2, 1));
mmc_irq[1] = qemu_irq_split(
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN),
qemu_irq_invert(qdev_get_gpio_in(gpio2, 0)));
qdev_connect_gpio_out(dev, 0, mmc_irq[0]);
qdev_connect_gpio_out(dev, 1, mmc_irq[1]);
sysbus_create_simple("pl031", 0x10017000, pic[10]);
if (!is_pb) {
dev = qdev_create(NULL, "realview_pci");
busdev = SYS_BUS_DEVICE(dev);
qdev_init_nofail(dev);
sysbus_mmio_map(busdev, 0, 0x61000000); /* PCI self-config */
sysbus_mmio_map(busdev, 1, 0x62000000); /* PCI config */
sysbus_mmio_map(busdev, 2, 0x63000000); /* PCI I/O */
sysbus_connect_irq(busdev, 0, pic[48]);
sysbus_connect_irq(busdev, 1, pic[49]);
sysbus_connect_irq(busdev, 2, pic[50]);
sysbus_connect_irq(busdev, 3, pic[51]);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
if (usb_enabled(false)) {
pci_create_simple(pci_bus, -1, "pci-ohci");
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
pci_create_simple(pci_bus, -1, "lsi53c895a");
n--;
}
}
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if (!done_nic && (!nd->model ||
strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) {
if (is_pb) {
lan9118_init(nd, 0x4e000000, pic[28]);
} else {
smc91c111_init(nd, 0x4e000000, pic[28]);
}
done_nic = 1;
} else {
pci_nic_init_nofail(nd, "rtl8139", NULL);
}
}
dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL);
i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
i2c_create_slave(i2c, "ds1338", 0x68);
/* Memory map for RealView Emulation Baseboard: */
/* 0x10000000 System registers. */
/* 0x10001000 System controller. */
/* 0x10002000 Two-Wire Serial Bus. */
/* 0x10003000 Reserved. */
/* 0x10004000 AACI. */
/* 0x10005000 MCI. */
/* 0x10006000 KMI0. */
/* 0x10007000 KMI1. */
/* 0x10008000 Character LCD. (EB) */
/* 0x10009000 UART0. */
/* 0x1000a000 UART1. */
/* 0x1000b000 UART2. */
/* 0x1000c000 UART3. */
/* 0x1000d000 SSPI. */
/* 0x1000e000 SCI. */
/* 0x1000f000 Reserved. */
/* 0x10010000 Watchdog. */
/* 0x10011000 Timer 0+1. */
/* 0x10012000 Timer 2+3. */
/* 0x10013000 GPIO 0. */
/* 0x10014000 GPIO 1. */
/* 0x10015000 GPIO 2. */
/* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */
/* 0x10017000 RTC. */
/* 0x10018000 DMC. */
/* 0x10019000 PCI controller config. */
/* 0x10020000 CLCD. */
/* 0x10030000 DMA Controller. */
/* 0x10040000 GIC1. (EB) */
/* 0x10050000 GIC2. (EB) */
/* 0x10060000 GIC3. (EB) */
/* 0x10070000 GIC4. (EB) */
/* 0x10080000 SMC. */
/* 0x1e000000 GIC1. (PB) */
/* 0x1e001000 GIC2. (PB) */
/* 0x1e002000 GIC3. (PB) */
/* 0x1e003000 GIC4. (PB) */
/* 0x40000000 NOR flash. */
/* 0x44000000 DoC flash. */
/* 0x48000000 SRAM. */
/* 0x4c000000 Configuration flash. */
/* 0x4e000000 Ethernet. */
/* 0x4f000000 USB. */
/* 0x50000000 PISMO. */
/* 0x54000000 PISMO. */
/* 0x58000000 PISMO. */
/* 0x5c000000 PISMO. */
/* 0x60000000 PCI. */
/* 0x61000000 PCI Self Config. */
/* 0x62000000 PCI Config. */
/* 0x63000000 PCI IO. */
/* 0x64000000 PCI mem 0. */
/* 0x68000000 PCI mem 1. */
/* 0x6c000000 PCI mem 2. */
/* ??? Hack to map an additional page of ram for the secondary CPU
startup code. I guess this works on real hardware because the
BootROM happens to be in ROM/flash or in memory that isn't clobbered
until after Linux boots the secondary CPUs. */
memory_region_init_ram(ram_hack, "realview.hack", 0x1000);
vmstate_register_ram_global(ram_hack);
memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack);
realview_binfo.ram_size = ram_size;
realview_binfo.kernel_filename = args->kernel_filename;
realview_binfo.kernel_cmdline = args->kernel_cmdline;
realview_binfo.initrd_filename = args->initrd_filename;
realview_binfo.nb_cpus = smp_cpus;
realview_binfo.board_id = realview_board_id[board_type];
realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);
arm_load_kernel(arm_env_get_cpu(first_cpu), &realview_binfo);
}
static void vexpress_common_init(MachineState *machine)
{
VexpressMachineState *vms = VEXPRESS_MACHINE(machine);
VexpressMachineClass *vmc = VEXPRESS_MACHINE_GET_CLASS(machine);
VEDBoardInfo *daughterboard = vmc->daughterboard;
DeviceState *dev, *sysctl, *pl041;
qemu_irq pic[64];
uint32_t sys_id;
DriveInfo *dinfo;
pflash_t *pflash0;
ram_addr_t vram_size, sram_size;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *vram = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
MemoryRegion *flashalias = g_new(MemoryRegion, 1);
MemoryRegion *flash0mem;
const hwaddr *map = daughterboard->motherboard_map;
int i;
daughterboard->init(vms, machine->ram_size, machine->cpu_type, pic);
/*
* If a bios file was provided, attempt to map it into memory
*/
if (bios_name) {
char *fn;
int image_size;
if (drive_get(IF_PFLASH, 0, 0)) {
error_report("The contents of the first flash device may be "
"specified with -bios or with -drive if=pflash... "
"but you cannot use both options at once");
exit(1);
}
fn = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (!fn) {
error_report("Could not find ROM image '%s'", bios_name);
exit(1);
}
image_size = load_image_targphys(fn, map[VE_NORFLASH0],
VEXPRESS_FLASH_SIZE);
g_free(fn);
if (image_size < 0) {
error_report("Could not load ROM image '%s'", bios_name);
exit(1);
}
}
/* Motherboard peripherals: the wiring is the same but the
* addresses vary between the legacy and A-Series memory maps.
*/
sys_id = 0x1190f500;
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_prop_set_uint32(sysctl, "proc_id", daughterboard->proc_id);
qdev_prop_set_uint32(sysctl, "len-db-voltage",
daughterboard->num_voltage_sensors);
for (i = 0; i < daughterboard->num_voltage_sensors; i++) {
char *propname = g_strdup_printf("db-voltage[%d]", i);
qdev_prop_set_uint32(sysctl, propname, daughterboard->voltages[i]);
g_free(propname);
}
qdev_prop_set_uint32(sysctl, "len-db-clock",
daughterboard->num_clocks);
for (i = 0; i < daughterboard->num_clocks; i++) {
char *propname = g_strdup_printf("db-clock[%d]", i);
qdev_prop_set_uint32(sysctl, propname, daughterboard->clocks[i]);
g_free(propname);
}
qdev_init_nofail(sysctl);
sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, map[VE_SYSREGS]);
/* VE_SP810: not modelled */
/* VE_SERIALPCI: not modelled */
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, map[VE_PL041]);
sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[11]);
dev = sysbus_create_varargs("pl181", map[VE_MMCI], pic[9], pic[10], NULL);
/* Wire up MMC card detect and read-only signals */
qdev_connect_gpio_out(dev, 0,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT));
qdev_connect_gpio_out(dev, 1,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN));
sysbus_create_simple("pl050_keyboard", map[VE_KMI0], pic[12]);
sysbus_create_simple("pl050_mouse", map[VE_KMI1], pic[13]);
pl011_create(map[VE_UART0], pic[5], serial_hds[0]);
pl011_create(map[VE_UART1], pic[6], serial_hds[1]);
pl011_create(map[VE_UART2], pic[7], serial_hds[2]);
pl011_create(map[VE_UART3], pic[8], serial_hds[3]);
sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]);
sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]);
/* VE_SERIALDVI: not modelled */
sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */
/* VE_COMPACTFLASH: not modelled */
sysbus_create_simple("pl111", map[VE_CLCD], pic[14]);
dinfo = drive_get_next(IF_PFLASH);
pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0",
dinfo);
if (!pflash0) {
fprintf(stderr, "vexpress: error registering flash 0.\n");
exit(1);
}
if (map[VE_NORFLASHALIAS] != -1) {
/* Map flash 0 as an alias into low memory */
flash0mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(pflash0), 0);
memory_region_init_alias(flashalias, NULL, "vexpress.flashalias",
flash0mem, 0, VEXPRESS_FLASH_SIZE);
memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], flashalias);
}
dinfo = drive_get_next(IF_PFLASH);
if (!ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1",
dinfo)) {
fprintf(stderr, "vexpress: error registering flash 1.\n");
exit(1);
}
sram_size = 0x2000000;
memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size,
&error_fatal);
memory_region_add_subregion(sysmem, map[VE_SRAM], sram);
vram_size = 0x800000;
memory_region_init_ram(vram, NULL, "vexpress.vram", vram_size,
&error_fatal);
memory_region_add_subregion(sysmem, map[VE_VIDEORAM], vram);
/* 0x4e000000 LAN9118 Ethernet */
if (nd_table[0].used) {
lan9118_init(&nd_table[0], map[VE_ETHERNET], pic[15]);
}
/* VE_USB: not modelled */
/* VE_DAPROM: not modelled */
/* Create mmio transports, so the user can create virtio backends
* (which will be automatically plugged in to the transports). If
* no backend is created the transport will just sit harmlessly idle.
*/
for (i = 0; i < NUM_VIRTIO_TRANSPORTS; i++) {
sysbus_create_simple("virtio-mmio", map[VE_VIRTIO] + 0x200 * i,
pic[40 + i]);
}
daughterboard->bootinfo.ram_size = machine->ram_size;
daughterboard->bootinfo.kernel_filename = machine->kernel_filename;
daughterboard->bootinfo.kernel_cmdline = machine->kernel_cmdline;
daughterboard->bootinfo.initrd_filename = machine->initrd_filename;
daughterboard->bootinfo.nb_cpus = smp_cpus;
daughterboard->bootinfo.board_id = VEXPRESS_BOARD_ID;
daughterboard->bootinfo.loader_start = daughterboard->loader_start;
daughterboard->bootinfo.smp_loader_start = map[VE_SRAM];
daughterboard->bootinfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
daughterboard->bootinfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr;
daughterboard->bootinfo.modify_dtb = vexpress_modify_dtb;
/* Indicate that when booting Linux we should be in secure state */
daughterboard->bootinfo.secure_boot = true;
arm_load_kernel(ARM_CPU(first_cpu), &daughterboard->bootinfo);
}
