static void __init tegra_ventana_init(void)
{
#if defined(CONFIG_TOUCHSCREEN_PANJIT_I2C) || \
defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9)
struct board_info BoardInfo;
#endif
tegra_common_init();
tegra_clk_init_from_table(ventana_clk_init_table);
ventana_pinmux_init();
ventana_i2c_init();
snprintf(usb_serial_num, sizeof(usb_serial_num), "%llx", tegra_chip_uid());
andusb_plat.serial_number = kstrdup(usb_serial_num, GFP_KERNEL);
tegra_i2s_device1.dev.platform_data = &tegra_audio_pdata[0];
tegra_i2s_device2.dev.platform_data = &tegra_audio_pdata[1];
tegra_spdif_device.dev.platform_data = &tegra_spdif_pdata;
tegra_das_device.dev.platform_data = &tegra_das_pdata;
tegra_ehci2_device.dev.platform_data
= &ventana_ehci2_ulpi_platform_data;
platform_add_devices(ventana_devices, ARRAY_SIZE(ventana_devices));
ventana_sdhci_init();
ventana_charge_init();
ventana_regulator_init();
#if defined(CONFIG_TOUCHSCREEN_PANJIT_I2C) || \
defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9)
tegra_get_board_info(&BoardInfo);
/* boards with sku > 0 have atmel touch panels */
if (BoardInfo.sku) {
pr_info("Initializing Atmel touch driver\n");
ventana_touch_init_atmel();
} else {
pr_info("Initializing Panjit touch driver\n");
ventana_touch_init_panjit();
}
#endif
#ifdef CONFIG_KEYBOARD_GPIO
ventana_keys_init();
#endif
#ifdef CONFIG_KEYBOARD_TEGRA
ventana_kbc_init();
#endif
ventana_wired_jack_init();
ventana_usb_init();
ventana_gps_init();
ventana_panel_init();
ventana_sensors_init();
ventana_bt_rfkill();
ventana_power_off_init();
ventana_emc_init();
#ifdef CONFIG_BT_BLUESLEEP
tegra_setup_bluesleep();
#endif
}
static void __init tegra_ventana_init(void)
{
#ifdef CONFIG_USB_ANDROID
tegra_android_platform.product_name = ventana_dev;
#endif
do_system_init(false, true);
i2c_device_setup();
tegra_setup_32khz_clock();
tegra_setup_bluesleep();
}
static void __init tegra_ventana_init(void)
{
#if defined(CONFIG_TOUCHSCREEN_PANJIT_I2C) || \
defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9) || defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9_EP102)
struct board_info BoardInfo;
#endif
tegra_booting_info();
tegra_common_init();
ventana_setup_misc();
tegra_clk_init_from_table(ventana_clk_init_table);
ventana_pinmux_init();
ventana_i2c_init();
ventana_uart_init();
snprintf(ventana_chipid, sizeof(ventana_chipid), "%016llx",
tegra_chip_uid());
snprintf(usb_serial_num, sizeof(usb_serial_num), "%llx", tegra_chip_uid());
andusb_plat.serial_number = kstrdup(usb_serial_num, GFP_KERNEL);
if (ASUSGetProjectID() == 102) {
andusb_plat.products[0].product_id = USB_SL101_PRODUCT_ID_MTP;
andusb_plat.products[1].product_id = USB_SL101_PRODUCT_ID_MTP_ADB;
andusb_plat.products[2].product_id = USB_SL101_PRODUCT_ID_RNDIS;
andusb_plat.products[3].product_id = USB_SL101_PRODUCT_ID_RNDIS_ADB;
}
tegra_i2s_device1.dev.platform_data = &tegra_audio_pdata[0];
tegra_i2s_device2.dev.platform_data = &tegra_audio_pdata[1];
tegra_spdif_device.dev.platform_data = &tegra_spdif_pdata;
tegra_das_device.dev.platform_data = &tegra_das_pdata;
//disable for wifi sku
if (ASUS3GAvailable()) {
tegra_ehci2_device.dev.platform_data
= &ventana_ehci2_ulpi_platform_data;
}
platform_add_devices(ventana_devices, ARRAY_SIZE(ventana_devices));
if ((ASUSGetProjectID() != 103) && (!console_none_on_cmdline)) {
//register debug uart resource only if
//"console=ttyXX" is specified and running target platform
//is not JN101(EP103)
platform_device_register(&debug_uart);
tegra_gpio_enable(TEGRA_GPIO_PB0);
gpio_request(TEGRA_GPIO_PB0, "UART4_RXD");
//limit RXD of UART debug console.
gpio_direction_output(TEGRA_GPIO_PB0, 1);
}
ventana_sdhci_init();
//ventana_charge_init();
ventana_regulator_init();
#if defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9) || defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9_EP102)
pr_info("Initializing Atmel touch driver\n");
ventana_touch_init_atmel();
#elif defined(CONFIG_TOUCHSCREEN_PANJIT_I2C)
pr_info("Initializing Panjit touch driver\n");
ventana_touch_init_panjit();
#endif
#ifdef CONFIG_TOUCHSCREEN_CYTTSP_I2C
ventana_touch_init();
#endif
#ifdef CONFIG_KEYBOARD_GPIO
ventana_keys_init();
#endif
#ifdef CONFIG_KEYBOARD_TEGRA
ventana_kbc_init();
#endif
#ifdef CONFIG_DSP_FM34
ventana_dsp_init();
#endif
ventana_wired_jack_init();
ventana_usb_init();
ventana_gps_init();
ventana_panel_init();
ventana_sensors_init();
ventana_bt_rfkill();
ventana_power_off_init();
ventana_emc_init();
#ifdef CONFIG_BT_BLUESLEEP
tegra_setup_bluesleep();
#endif
}
static void __init tegra_mot_init(void)
{
tegra_common_init();
tegra_setup_nvodm(true, true);
tegra_register_socdev();
#ifdef CONFIG_APANIC_RAM
apanic_ram_init();
#endif
#ifdef CONFIG_APANIC_MMC
apanic_mmc_init();
#endif
mot_setup_power();
mot_setup_lights(&tegra_i2c_bus0_board_info[BACKLIGHT_DEV]);
mot_setup_touch(&tegra_i2c_bus0_board_info[TOUCHSCREEN_DEV]);
mot_sec_init();
mot_tcmd_init();
mot_setup_gadget();
if(machine_is_olympus()) {
tegra_uart_platform[UART_IPC_OLYMPUS].uart_ipc = 1;
tegra_uart_platform[UART_IPC_OLYMPUS].uart_wake_host = TEGRA_GPIO_PA0;
tegra_uart_platform[UART_IPC_OLYMPUS].uart_wake_request = TEGRA_GPIO_PF1;
tegra_uart_platform[UART_IPC_OLYMPUS].peer_register = mot_mdm_ctrl_peer_register;
}
else if(machine_is_etna()) {
if (HWREV_TYPE_IS_BRASSBOARD(system_rev)) {
/* The modem is dead on S2, which makes the UART angry. */
tegra_uart_platform[UART_IPC_ETNA].uart_ipc = 0;
tegra_uart_platform[UART_IPC_ETNA].p.irq = ~0;
} else {
tegra_uart_platform[UART_IPC_ETNA].uart_ipc = 1;
tegra_uart_platform[UART_IPC_ETNA].uart_wake_host = TEGRA_GPIO_PA0;
tegra_uart_platform[UART_IPC_ETNA].uart_wake_request = TEGRA_GPIO_PF1;
tegra_uart_platform[UART_IPC_ETNA].peer_register = mot_mdm_ctrl_peer_register;
}
}
else if(machine_is_tegra_daytona()) {
tegra_uart_platform[UART_IPC_DAYTONA].uart_ipc = 1;
tegra_uart_platform[UART_IPC_DAYTONA].uart_wake_host = TEGRA_GPIO_PA0;
tegra_uart_platform[UART_IPC_DAYTONA].uart_wake_request = TEGRA_GPIO_PF1;
tegra_uart_platform[UART_IPC_DAYTONA].peer_register = mot_mdm_ctrl_peer_register;
}
else if(machine_is_sunfire()) {
tegra_uart_platform[UART_IPC_SUNFIRE].uart_ipc = 1;
tegra_uart_platform[UART_IPC_SUNFIRE].uart_wake_host = TEGRA_GPIO_PA0;
tegra_uart_platform[UART_IPC_SUNFIRE].uart_wake_request = TEGRA_GPIO_PF1;
tegra_uart_platform[UART_IPC_SUNFIRE].peer_register = mot_mdm_ctrl_peer_register;
}
if( (bi_powerup_reason() & PWRUP_FACTORY_CABLE) &&
(bi_powerup_reason() != PWRUP_INVALID) ){
#ifdef NEED_FACT_BUSY_HINT
FactoryBusyHint(); //factory workaround no longer needed
#endif
}
mot_modem_init();
(void) platform_driver_register(&cpcap_usb_connected_driver);
#ifdef CONFIG_MOT_WIMAX
mot_wimax_gpio_init();
#endif
mot_wlan_init();
mot_sensors_init();
mot_nvodmcam_init();
printk("%s: registering i2c devices...\n", __func__);
if(!(bi_powerup_reason() & PWRUP_BAREBOARD)) {
printk("bus 0: %d devices\n", ARRAY_SIZE(tegra_i2c_bus0_board_info));
i2c_register_board_info(0, tegra_i2c_bus0_board_info,
ARRAY_SIZE(tegra_i2c_bus0_board_info));
}
if (machine_is_etna() || machine_is_tegra_daytona() || machine_is_sunfire()) {
printk("bus 2: %d devices\n", ARRAY_SIZE(tegra_i2c_bus2_board_info));
i2c_register_board_info(2, tegra_i2c_bus2_board_info,
ARRAY_SIZE(tegra_i2c_bus2_board_info));
}
printk("bus 3: %d devices\n", ARRAY_SIZE(tegra_i2c_bus3_board_info));
i2c_register_board_info(3, tegra_i2c_bus3_board_info,
ARRAY_SIZE(tegra_i2c_bus3_board_info));
if (machine_is_olympus()){
/* console UART can be routed to 'headset jack by setting HSJ mux to 0*/
short hsj_mux_gpio=1;
if ( HWREV_TYPE_IS_DEBUG(system_rev) ){
printk("%s: Enabling console on headset jack\n", __FUNCTION__);
hsj_mux_gpio=0;
}
mot_set_hsj_mux( hsj_mux_gpio );
}
pm_power_off = mot_system_power_off;
tegra_setup_bluesleep();
/* Configure SPDIF_OUT as GPIO by default, it can be later controlled
as needed. When SPDIF_OUT is enabled and if HDMI is connected, it
can interefere with CPCAP ID pin, as SPDIF_OUT and ID are coupled.
*/
tegra_gpio_enable(TEGRA_GPIO_PD4);
gpio_request(TEGRA_GPIO_PD4, "spdif_enable");
gpio_direction_output(TEGRA_GPIO_PD4, 0);
gpio_export(TEGRA_GPIO_PD4, false);
if (machine_is_olympus() && (HWREV_TYPE_IS_PORTABLE(system_rev) || HWREV_TYPE_IS_FINAL(system_rev)))
{
if (HWREV_REV(system_rev) >= HWREV_REV_1 && HWREV_REV(system_rev) < HWREV_REV_2)
{
// Olympus P1
config_unused_pins(oly_unused_pins_p1, ARRAY_SIZE(oly_unused_pins_p1));
}
else if (HWREV_REV(system_rev) >= HWREV_REV_2 && HWREV_REV(system_rev) < HWREV_REV_3)
{
// Olympus P2
config_unused_pins(oly_unused_pins_p2, ARRAY_SIZE(oly_unused_pins_p2));
}
else if (HWREV_REV(system_rev) >= HWREV_REV_3 || HWREV_TYPE_IS_FINAL(system_rev))
{
// Olympus P3 and newer
config_unused_pins(oly_unused_pins_p3, ARRAY_SIZE(oly_unused_pins_p3));
}
}
if (machine_is_etna())
{
if (HWREV_TYPE_IS_PORTABLE(system_rev) && (HWREV_REV(system_rev) >= HWREV_REV_2) && (HWREV_REV(system_rev) < HWREV_REV_2C))
{
config_unused_pins(etna_unused_pins_p2a, ARRAY_SIZE(etna_unused_pins_p2a));
}
else if ((HWREV_TYPE_IS_PORTABLE(system_rev) && HWREV_REV(system_rev) >= HWREV_REV_2C) ||
(HWREV_TYPE_IS_MORTABLE(system_rev) && HWREV_REV(system_rev) >= HWREV_REV_3) ||
HWREV_TYPE_IS_FINAL(system_rev))
{
config_unused_pins(etna_unused_pins_p2c, ARRAY_SIZE(etna_unused_pins_p2c));
}
}
if (machine_is_tegra_daytona())
config_unused_pins(daytona_unused_pins_p1, ARRAY_SIZE(daytona_unused_pins_p1));
if (machine_is_etna() || machine_is_tegra_daytona() || machine_is_sunfire())
// UTS tool support
mot_keymap_update_init();
}
static void __init tegra_mot_init(void)
{
get_gpio_settings();
tegra_common_init();
get_gpio_settings();
tegra_setup_nvodm(true, true);
get_gpio_settings();
tegra_register_socdev();
get_gpio_settings();
#if 0
#ifdef CONFIG_APANIC_RAM
apanic_ram_init();
#endif
#endif
#ifdef CONFIG_APANIC_MMC
apanic_mmc_init();
#endif
get_gpio_settings();
mot_setup_power();
/* mot_setup_lights(&tegra_i2c_bus0_board_info[BACKLIGHT_DEV]);
mot_setup_touch(&tegra_i2c_bus0_board_info[TOUCHSCREEN_DEV]);*/
/* mot_sec_init();
mot_tcmd_init();*/
get_gpio_settings();
mot_setup_gadget();
tegra_uart_platform[UART_IPC_OLYMPUS].uart_ipc = 1;
tegra_uart_platform[UART_IPC_OLYMPUS].uart_wake_host = TEGRA_GPIO_PA0;
tegra_uart_platform[UART_IPC_OLYMPUS].uart_wake_request = TEGRA_GPIO_PF1;
#ifdef CONFIG_MDM_CTRL
tegra_uart_platform[UART_IPC_OLYMPUS].peer_register = mot_mdm_ctrl_peer_register;
#endif
#ifdef CONFIG_BOOTINFO
if( (bi_powerup_reason() & PWRUP_FACTORY_CABLE) &&
(bi_powerup_reason() != PWRUP_INVALID) ){
#ifdef NEED_FACT_BUSY_HINT
FactoryBusyHint(); //factory workaround no longer needed
#endif
}
#endif
/* mot_modem_init();*/
(void) platform_driver_register(&cpcap_usb_connected_driver);
/* mot_wlan_init();
mot_sensors_init();
mot_nvodmcam_init();*/
printk("%s: registering i2c devices...\n", __func__);
#ifdef CONFIG_BOOTINFO
if(!(bi_powerup_reason() & PWRUP_BAREBOARD)) {
printk("bus 0: %d devices\n", ARRAY_SIZE(tegra_i2c_bus0_board_info));
i2c_register_board_info(0, tegra_i2c_bus0_board_info,
ARRAY_SIZE(tegra_i2c_bus0_board_info));
}
#else
printk("bus 0: %d devices\n", ARRAY_SIZE(tegra_i2c_bus0_board_info));
i2c_register_board_info(0, tegra_i2c_bus0_board_info,
ARRAY_SIZE(tegra_i2c_bus0_board_info));
#endif
printk("bus 3: %d devices\n", ARRAY_SIZE(tegra_i2c_bus3_board_info));
i2c_register_board_info(3, tegra_i2c_bus3_board_info,
ARRAY_SIZE(tegra_i2c_bus3_board_info));
/* console UART can be routed to 'headset jack by setting HSJ mux to 0*/
short hsj_mux_gpio=1;
if ( HWREV_TYPE_IS_DEBUG(system_rev) || ENABLE_JACK_UART ){
printk("%s: Enabling console on headset jack\n", __FUNCTION__);
hsj_mux_gpio=0;
}
mot_set_hsj_mux( hsj_mux_gpio );
pm_power_off = mot_system_power_off;
tegra_setup_bluesleep();
/* Configure SPDIF_OUT as GPIO by default, it can be later controlled
as needed. When SPDIF_OUT is enabled and if HDMI is connected, it
can interefere with CPCAP ID pin, as SPDIF_OUT and ID are coupled.
*/
tegra_gpio_enable(TEGRA_GPIO_PD4);
gpio_request(TEGRA_GPIO_PD4, "spdif_enable");
gpio_direction_output(TEGRA_GPIO_PD4, 0);
gpio_export(TEGRA_GPIO_PD4, false);
if ((HWREV_TYPE_IS_PORTABLE(system_rev) || HWREV_TYPE_IS_FINAL(system_rev)))
{
if (HWREV_REV(system_rev) >= HWREV_REV_1 && HWREV_REV(system_rev) < HWREV_REV_2)
{
// Olympus P1
config_unused_pins(oly_unused_pins_p1, ARRAY_SIZE(oly_unused_pins_p1));
}
else if (HWREV_REV(system_rev) >= HWREV_REV_2 && HWREV_REV(system_rev) < HWREV_REV_3)
{
// Olympus P2
config_unused_pins(oly_unused_pins_p2, ARRAY_SIZE(oly_unused_pins_p2));
}
else if (HWREV_REV(system_rev) >= HWREV_REV_3 || HWREV_TYPE_IS_FINAL(system_rev))
{
// Olympus P3 and newer
config_unused_pins(oly_unused_pins_p3, ARRAY_SIZE(oly_unused_pins_p3));
}
}
get_gpio_settings();
}
static void __init tegra_ventana_init(void)
{
#if defined(CONFIG_TOUCHSCREEN_PANJIT_I2C) || \
defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9)
struct board_info BoardInfo;
#endif
tegra_common_init();
tegra_clk_init_from_table(ventana_clk_init_table);
ventana_pinmux_init();
ventana_i2c_init();
snprintf(usb_serial_num, sizeof(usb_serial_num), "%llx", tegra_chip_uid());
andusb_plat.serial_number = kstrdup(usb_serial_num, GFP_KERNEL);
tegra_i2s_device1.dev.platform_data = &tegra_audio_pdata[0];
tegra_i2s_device2.dev.platform_data = &tegra_audio_pdata[1];
tegra_spdif_device.dev.platform_data = &tegra_spdif_pdata;
#ifdef CONFIG_BUILDTYPE_SHIP
if (console_set_none == 1)
{
tegra_pinmux_set_tristate(TEGRA_PINGROUP_IRRX,
TEGRA_TRI_TRISTATE);
tegra_pinmux_set_tristate(TEGRA_PINGROUP_IRTX,
TEGRA_TRI_TRISTATE);
}
else
{
if (is_tegra_debug_uartport_hs() == true)
platform_device_register(&tegra_uartd_device);
else
platform_device_register(&debug_uart);
}
#else
if (is_tegra_debug_uartport_hs() == true)
platform_device_register(&tegra_uartd_device);
else
platform_device_register(&debug_uart);
#endif
tegra_das_device.dev.platform_data = &tegra_das_pdata;
platform_add_devices(ventana_devices, ARRAY_SIZE(ventana_devices));
ventana_sdhci_init();
ventana_regulator_init();
#if defined(CONFIG_TOUCHSCREEN_PANJIT_I2C) || \
defined(CONFIG_TOUCHSCREEN_ATMEL_MT_T9)
tegra_get_board_info(&BoardInfo);
/* boards with sku > 0 have atmel touch panels */
/* if (BoardInfo.sku) {
pr_info("Initializing Atmel touch driver\n");
ventana_touch_init_atmel();
} else {
pr_info("Initializing Panjit touch driver\n");
ventana_touch_init_panjit();
}*/
#endif
#ifdef CONFIG_TOUCHSCREEN_ATMEL_mXT224
ventana_touch_init_atmel();
#endif
#ifdef CONFIG_ATA2538_CAPKEY
ventana_capkey_init();
#endif
#ifdef CONFIG_TEGRA_KEYPAD
tegra_keypad_init();
#endif
#ifdef CONFIG_KEYBOARD_GPIO
#endif
#ifdef CONFIG_KEYBOARD_TEGRA
#endif
ventana_datacards_init();
ventana_usb_init();
ventana_gps_init();
ventana_panel_init();
ventana_sensors_init();
ventana_bt_rfkill();
ventana_power_off_init();
tegra_setup_bluesleep();
}
