/**@brief Function for updating the Capture Compare register.
*/
static void compare_reg_update(app_timer_id_t timer_id_head_old)
{
// Setup the timeout for timers on the head of the list
if (m_timer_id_head != TIMER_NULL)
{
uint32_t ticks_to_expire = mp_nodes[m_timer_id_head].ticks_to_expire;
uint32_t counter = rtc1_counter_get();
uint32_t cc = m_ticks_latest;
uint32_t ticks_elapsed = ticks_diff_get(counter, cc) + RTC_COMPARE_OFFSET_MIN;
if (timer_id_head_old == TIMER_NULL)
{
// No timers were already running, start RTC
rtc1_start();
}
cc += (ticks_elapsed < ticks_to_expire) ? ticks_to_expire : ticks_elapsed;
cc &= MAX_RTC_CNT;
rtc1_compare0_set(cc);
if (ticks_diff_get(rtc1_counter_get(), counter) > ticks_diff_get(cc, counter))
{
timer_timeouts_check_sched();
}
}
else
{
// No timers are running, stop RTC
rtc1_stop();
}
}
uint32_t app_timer_cnt_diff_compute(uint32_t ticks_to,
uint32_t ticks_from,
uint32_t * p_ticks_diff)
{
*p_ticks_diff = ticks_diff_get(ticks_to, ticks_from);
return NRF_SUCCESS;
}
/**@brief Function for updating the Capture Compare register.
*/
static void compare_reg_update(timer_node_t * p_timer_id_head_old)
{
// Setup the timeout for timers on the head of the list
if (mp_timer_id_head != NULL)
{
uint32_t ticks_to_expire = mp_timer_id_head->ticks_to_expire;
uint32_t pre_counter_val = rtc1_counter_get();
uint32_t cc = m_ticks_latest;
uint32_t ticks_elapsed = ticks_diff_get(pre_counter_val, cc) + RTC_COMPARE_OFFSET_MIN;
if (!m_rtc1_running)
{
// No timers were already running, start RTC
rtc1_start();
}
cc += (ticks_elapsed < ticks_to_expire) ? ticks_to_expire : ticks_elapsed;
cc &= MAX_RTC_COUNTER_VAL;
rtc1_compare0_set(cc);
uint32_t post_counter_val = rtc1_counter_get();
if (
(ticks_diff_get(post_counter_val, pre_counter_val) + RTC_COMPARE_OFFSET_MIN)
>
ticks_diff_get(cc, pre_counter_val)
)
{
// When this happens the COMPARE event may not be triggered by the RTC.
// The nRF51 Series User Specification states that if the COUNTER value is N
// (i.e post_counter_val = N), writing N or N + 1 to a CC register may not trigger a
// COMPARE event. Hence the RTC interrupt is forcefully pended by calling the following
// function.
rtc1_compare0_set(rtc1_counter_get()); // this should prevent CC to fire again in the background while the code is in RTC-ISR
nrf_delay_us(MAX_RTC_TASKS_DELAY);
timer_timeouts_check_sched();
}
}
else
{
#if (APP_TIMER_KEEPS_RTC_ACTIVE == 0)
// No timers are running, stop RTC
rtc1_stop();
#endif //(APP_TIMER_KEEPS_RTC_ACTIVE == 0)
}
}
/**@brief Function for updating the Capture Compare register.
*/
static void compare_reg_update(app_timer_id_t timer_id_head_old)
{
// Setup the timeout for timers on the head of the list
if (m_timer_id_head != TIMER_NULL)
{
uint32_t ticks_to_expire = mp_nodes[m_timer_id_head].ticks_to_expire;
uint32_t pre_counter_val = rtc1_counter_get();
uint32_t cc = m_ticks_latest;
uint32_t ticks_elapsed = ticks_diff_get(pre_counter_val, cc) + RTC_COMPARE_OFFSET_MIN;
if (timer_id_head_old == TIMER_NULL)
{
// No timers were already running, start RTC
rtc1_start();
}
cc += (ticks_elapsed < ticks_to_expire) ? ticks_to_expire : ticks_elapsed;
cc &= MAX_RTC_COUNTER_VAL;
rtc1_compare0_set(cc);
uint32_t post_counter_val = rtc1_counter_get();
if (
(ticks_diff_get(post_counter_val, pre_counter_val) + RTC_COMPARE_OFFSET_MIN)
>
ticks_diff_get(cc, pre_counter_val)
)
{
// When this happens the COMPARE event may not be triggered by the RTC.
// The nRF51 Series User Specification states that if the COUNTER value is N
// (i.e post_counter_val = N), writing N or N+1 to a CC register may not trigger a
// COMPARE event. Hence the RTC interrupt is forcefully pended by calling the following
// function.
timer_timeouts_check_sched();
}
}
else
{
// No timers are running, stop RTC
rtc1_stop();
}
}
/**@brief Function for handling timer list insertions.
*
* @param[in] p_restart_list_head List of repeating timers to be restarted.
*
* @return TRUE if Capture Compare register must be updated, FALSE otherwise.
*/
static bool list_insertions_handler(timer_node_t * p_restart_list_head)
{
timer_node_t * p_timer_id_old_head;
uint8_t user_id;
// Remember the old head, so as to decide if new compare needs to be set.
p_timer_id_old_head = mp_timer_id_head;
user_id = m_user_array_size;
while (user_id--)
{
timer_user_t * p_user = &mp_users[user_id];
// Handle insertions of timers.
while ((p_restart_list_head != NULL) || (p_user->first != p_user->last))
{
timer_node_t * p_timer;
if (p_restart_list_head != NULL)
{
p_timer = p_restart_list_head;
p_restart_list_head = p_timer->next;
}
else
{
timer_user_op_t * p_user_op = &p_user->p_user_op_queue[p_user->first];
p_user->first++;
if (p_user->first == p_user->user_op_queue_size)
{
p_user->first = 0;
}
p_timer = p_user_op->p_node;
if ((p_user_op->op_type != TIMER_USER_OP_TYPE_START) || p_timer->is_running)
{
continue;
}
p_timer->ticks_at_start = p_user_op->params.start.ticks_at_start;
p_timer->ticks_first_interval = p_user_op->params.start.ticks_first_interval;
p_timer->ticks_periodic_interval = p_user_op->params.start.ticks_periodic_interval;
p_timer->p_context = p_user_op->params.start.p_context;
if (m_rtc1_reset)
{
p_timer->ticks_at_start = 0;
}
}
// Prepare the node to be inserted.
if (
((p_timer->ticks_at_start - m_ticks_latest) & MAX_RTC_COUNTER_VAL)
<
(MAX_RTC_COUNTER_VAL / 2)
)
{
p_timer->ticks_to_expire = ticks_diff_get(p_timer->ticks_at_start, m_ticks_latest) +
p_timer->ticks_first_interval;
}
else
{
uint32_t delta_current_start;
delta_current_start = ticks_diff_get(m_ticks_latest, p_timer->ticks_at_start);
if (p_timer->ticks_first_interval > delta_current_start)
{
p_timer->ticks_to_expire = p_timer->ticks_first_interval - delta_current_start;
}
else
{
p_timer->ticks_to_expire = 0;
}
}
p_timer->ticks_at_start = 0;
p_timer->ticks_first_interval = 0;
p_timer->is_running = true;
p_timer->next = NULL;
// Insert into list
timer_list_insert(p_timer);
}
}
return (mp_timer_id_head != p_timer_id_old_head);
}
/**@brief Function for checking for expired timers.
*/
static void timer_timeouts_check(void)
{
// Handle expired of timer
if (mp_timer_id_head != NULL)
{
timer_node_t * p_timer;
timer_node_t * p_previous_timer;
uint32_t ticks_elapsed;
uint32_t ticks_expired;
// Initialize actual elapsed ticks being consumed to 0.
ticks_expired = 0;
// ticks_elapsed is collected here, job will use it.
ticks_elapsed = ticks_diff_get(rtc1_counter_get(), m_ticks_latest);
// Auto variable containing the head of timers expiring.
p_timer = mp_timer_id_head;
// Expire all timers within ticks_elapsed and collect ticks_expired.
while (p_timer != NULL)
{
// Do nothing if timer did not expire.
if (ticks_elapsed < p_timer->ticks_to_expire)
{
break;
}
// Decrement ticks_elapsed and collect expired ticks.
ticks_elapsed -= p_timer->ticks_to_expire;
ticks_expired += p_timer->ticks_to_expire;
// Move to next timer.
p_previous_timer = p_timer;
p_timer = p_timer->next;
// Execute Task.
timeout_handler_exec(p_previous_timer);
}
// Prepare to queue the ticks expired in the m_ticks_elapsed queue.
if (m_ticks_elapsed_q_read_ind == m_ticks_elapsed_q_write_ind)
{
// The read index of the queue is equal to the write index. This means the new
// value of ticks_expired should be stored at a new location in the m_ticks_elapsed
// queue (which is implemented as a double buffer).
// Check if there will be a queue overflow.
if (++m_ticks_elapsed_q_write_ind == CONTEXT_QUEUE_SIZE_MAX)
{
// There will be a queue overflow. Hence the write index should point to the start
// of the queue.
m_ticks_elapsed_q_write_ind = 0;
}
}
// Queue the ticks expired.
m_ticks_elapsed[m_ticks_elapsed_q_write_ind] = ticks_expired;
timer_list_handler_sched();
}
}
/**@brief Function for checking for expired timers.
*/
static void timer_timeouts_check(void)
{
// Handle expired of timer
if (m_timer_id_head != TIMER_NULL)
{
uint32_t ticks_expired;
uint8_t ticks_elapsed_last;
// Initialize actual elapsed ticks being consumed to 0
ticks_expired = 0;
// Queue the ticks elapsed (to make the value context safe)
ticks_elapsed_last = m_ticks_elapsed_last + 1;
if (ticks_elapsed_last == CONTEXT_QUEUE_SIZE_MAX)
{
ticks_elapsed_last = 0;
}
if (ticks_elapsed_last != m_ticks_elapsed_first)
{
app_timer_id_t timer_id;
uint32_t ticks_elapsed;
// Ticks_elapsed is collected here, job will use it
ticks_elapsed = ticks_diff_get(rtc1_counter_get(), m_ticks_latest);
// Auto variable containing the head of timers expiring
timer_id = m_timer_id_head;
// Expire all timers within ticks_elapsed and collect ticks_expired
while (timer_id != TIMER_NULL)
{
timer_node_t * p_timer;
// Auto variable for current timer node
p_timer = &mp_nodes[timer_id];
// Do nothing if timer did not expire
if (ticks_elapsed < p_timer->ticks_to_expire)
{
break;
}
// Decrement ticks_elapsed and collect expired ticks
ticks_elapsed -= p_timer->ticks_to_expire;
ticks_expired += p_timer->ticks_to_expire;
// Move to next timer
timer_id = p_timer->next;
// Execute Task
timeout_handler_exec(p_timer);
}
}
// Queue the elapsed value
m_ticks_elapsed[m_ticks_elapsed_last] = ticks_expired;
m_ticks_elapsed_last = ticks_elapsed_last;
timer_list_handler_sched();
}
}
