/**
* \brief Card R/W tests
*
* \param slot SD/MMC slot to test
*/
static void main_test_memory(uint8_t slot)
{
uint32_t last_blocks_addr, i, nb_trans;
uint32_t tick_start, time_ms;
// Compute the last address
last_blocks_addr = sd_mmc_get_capacity(slot) *
(1024 / SD_MMC_BLOCK_SIZE);
if (last_blocks_addr < (TEST_MEM_START_OFFSET / 512lu)) {
printf("[Memory is too small.]\n\r");
return;
}
last_blocks_addr -= (TEST_MEM_START_OFFSET / SD_MMC_BLOCK_SIZE);
printf("Card R/W test:\n\r");
// Read the last block
printf(" Read... ");
tick_start = time_tick_get();
if (SD_MMC_OK != sd_mmc_init_read_blocks(slot,
last_blocks_addr,
TEST_MEM_AREA_SIZE / SD_MMC_BLOCK_SIZE)) {
printf("[FAIL]\n\r");
return;
}
for (nb_trans = 0; nb_trans < (TEST_MEM_AREA_SIZE / TEST_MEM_ACCESS_SIZE);
nb_trans++) {
if (SD_MMC_OK != sd_mmc_start_read_blocks(buf_test,
TEST_MEM_ACCESS_SIZE / SD_MMC_BLOCK_SIZE)) {
printf("[FAIL]\n\r");
return;
}
if (SD_MMC_OK != sd_mmc_wait_end_of_read_blocks()) {
printf("[FAIL]\n\r");
return;
}
}
time_ms = time_tick_calc_delay(tick_start, time_tick_get());
if (time_ms) { // Valid time_ms
printf(" %d KBps ", (int)(((TEST_MEM_AREA_SIZE
* 1000lu) / 1024lu) / time_ms));
}
printf("[OK]\n\r");
if (sd_mmc_is_write_protected(slot)) {
printf("Card is write protected [WRITE TEST SKIPPED]\n\r");
return;
}
// Fill buffer with a pattern
for (i = 0; i < (TEST_MEM_ACCESS_SIZE / sizeof(uint32_t)); i++) {
((uint32_t*)buf_test)[i] = TEST_FILL_VALUE_U32;
}
printf(" Write pattern... ");
if (SD_MMC_OK != sd_mmc_init_write_blocks(slot,
last_blocks_addr,
TEST_MEM_AREA_SIZE / SD_MMC_BLOCK_SIZE)) {
printf("[FAIL]\n\r");
return;
}
tick_start = time_tick_get();
for (nb_trans = 0; nb_trans < (TEST_MEM_AREA_SIZE / TEST_MEM_ACCESS_SIZE);
nb_trans++) {
((uint32_t*)buf_test)[0] = nb_trans; // Unique value for each area
if (SD_MMC_OK != sd_mmc_start_write_blocks(buf_test,
TEST_MEM_ACCESS_SIZE / SD_MMC_BLOCK_SIZE)) {
printf("[FAIL]\n\r");
return;
}
if (SD_MMC_OK != sd_mmc_wait_end_of_write_blocks()) {
printf("[FAIL]\n\r");
return;
}
}
time_ms = time_tick_calc_delay(tick_start, time_tick_get());
if (time_ms) { // Valid time_ms
printf(" %d KBps ", (int)(((TEST_MEM_AREA_SIZE
* 1000lu) / 1024lu) / time_ms));
}
printf("[OK]\n\r");
printf(" Read and check pattern... ");
if (SD_MMC_OK != sd_mmc_init_read_blocks(slot,
last_blocks_addr,
TEST_MEM_AREA_SIZE / SD_MMC_BLOCK_SIZE)) {
printf("Read [FAIL]\n\r");
return;
}
for (nb_trans = 0; nb_trans < (TEST_MEM_AREA_SIZE / TEST_MEM_ACCESS_SIZE);
nb_trans++) {
// Clear buffer
for (i = 0; i < (TEST_MEM_ACCESS_SIZE / sizeof(uint32_t)); i++) {
((uint32_t*)buf_test)[i] = 0xFFFFFFFF;
}
// Fill buffer
if (SD_MMC_OK != sd_mmc_start_read_blocks(buf_test,
TEST_MEM_ACCESS_SIZE / SD_MMC_BLOCK_SIZE)) {
printf("Read [FAIL]\n\r");
return;
}
if (SD_MMC_OK != sd_mmc_wait_end_of_read_blocks()) {
printf("Read [FAIL]\n\r");
return;
}
// Check the unique value of the area
if (((uint32_t*)buf_test)[0] != nb_trans) {
printf("Check [FAIL]\n\r");
return;
}
// Check buffer
for (i = 1; i < (TEST_MEM_ACCESS_SIZE / sizeof(uint32_t)); i++) {
if (((uint32_t*)buf_test)[i] != TEST_FILL_VALUE_U32) {
printf("Check [FAIL]\n\r");
return;
}
}
}
printf("[OK]\n\r");
}
/**
* \brief Reconfigure serial console.
*/
static void reconfigure_com_port(void)
{
const sam_usart_opt_t opt = {
.baudrate = CONF_UART_BAUDRATE,
.char_length = CONF_UART_CHAR_LENGTH,
.parity_type = CONF_UART_PARITY,
.stop_bits = CONF_UART_STOP_BITS,
.channel_mode = US_MR_CHMODE_NORMAL,
.irda_filter = 0,
};
usart_init_rs232(CONF_UART, &opt, LOWER_SYS_CLK);
usart_enable_tx(CONF_UART);
}
/**
* \brief Recursively calculate the nth Fibonacci number.
*
* \param n Indicates which (positive) Fibonacci number to compute.
*
* \return The nth Fibonacci number.
*/
static uint32_t recfibo(uint32_t n)
{
if (n == 0 || n == 1) {
return n;
}
return recfibo(n - 2) + recfibo(n - 1);
}
/**
* \brief This is an example demonstrating Fibonacci calculation
* with and without PicoCache.
*
* \param caption Caption to print before running the example.
* \param pico_enable Enable PicoCache or not.
*/
static void flash_picocache_example(const char *caption, bool pico_enable)
{
uint32_t tick_start, time_ms;
printf("\n\r--------------\n\r%s\n\r", caption);
/* Enable PicoCache if required */
if (pico_enable) {
flashcalw_picocache_enable();
flashcalw_picocache_set_monitor_mode(HCACHE_MCFG_MODE_IHIT);
flashcalw_picocache_enable_monitor();
flashcalw_picocache_reset_monitor();
} else {
flashcalw_picocache_disable();
flashcalw_picocache_disable_monitor();
}
/* Get current time tick */
tick_start = time_tick_get();
/* Do the Fibonacci calculation. */
recfibo(FIBONACCI_NUM);
/* Calculate the Fibonacci spent time */
time_ms = time_tick_calc_delay(tick_start, time_tick_get());
if (time_ms) {
printf("Time spent: %u ms\r\n", (unsigned int)time_ms);
}
/* Display cache hit counter */
if (pico_enable) {
printf("Pico cache instruction hit: %u \r\n",
(unsigned int)flashcalw_picocache_get_monitor_cnt());
}
}
