Ejemplo n.º 1
0
void vTinyshTask(void * pvParameters)
{
	int again = 1;
	unsigned char c;
	tinysh_set_prompt(":>");
	tinysh_add_command(&myfoocmd);
	tinysh_add_command(&ctxcmd);
	tinysh_add_command(&item1);
	tinysh_add_command(&item2);
	{
	tinysh_cmd_t quitcmd={0, "quit", "exit shell", 0, reset_to_0, (void *) &again,0,0};	
	tinysh_add_command(&quitcmd);
	}

	
	while(again)
	{
		c=UART0_Getchar();
		tinysh_char_in((unsigned char) c);
		
	}
	printf("\n\rTinysh exiting\n\r");
	while(1);
}
Ejemplo n.º 2
0
Archivo: shell.c Proyecto: koson/atinom
portTASK_FUNCTION(shell, pvParameters )
{
  	int c;
  	xTaskHandle xHandle;
  	printf("\n%s v%s\r\n", NAMA_BOARD, VERSI_KOMON);

  	printf("Daun Biru Engineering, Des 2008\r\n");
  	printf("=========================================\r\n");
  	printf("ARM-GCC %s : %s : %s\r\n", __VERSION__, __DATE__, __TIME__);
  	printf("CPU = LPC 2387, %d MHz,", configCPU_CLOCK_HZ/1000000);
  	printf(" FreeRTOS 5.1.1\r\n");

	if (configUSE_PREEMPTION == 0)
		printf("NON Preemptive kernel digunakan !\r\n"); 
	else
		printf("Preemptive kernel digunakan !\r\n");
	
	#ifdef USB_TEST
	Host_Init();               /* Initialize the lpc2468 host controller                                    */
    //c = Host_EnumDev();       /* Enumerate the device connected */     
   	// if (c == 0) printf("Ketemu !\r\n");  
   	
   	#if 1
   	if (OHCIInit() == 0)
   	{
   		printf("------------ Init error \r\n");
   	}
   	
   	//install_usb_interrupt();
   	#endif
	#endif
	
	/* 
	 * add command
	 */
  	//tinysh_add_command(&myfoocmd);
  	tinysh_add_command(&printenv_cmd);
	tinysh_add_command(&setenv_cmd);
//	tinysh_add_command(&save_env_cmd);
	tinysh_add_command(&reset_cmd);
	tinysh_add_command(&cek_stack_cmd);
	tinysh_add_command(&uptime_cmd);
	tinysh_add_command(&version_cmd);
	
#ifdef BOARD_KOMON_KONTER
	tinysh_add_command(&cek_rpm_cmd);
	tinysh_add_command(&set_kanal_cmd);
#endif

//#ifdef BOARD_TAMPILAN
#ifdef CARI_SUMBER
	tinysh_add_command(&cek_sumber_cmd);
	tinysh_add_command(&set_sumber_cmd);
	//tinysh_add_command(&cek_mesin_cmd);
	//tinysh_add_command(&set_mesin_cmd);
	//tinysh_add_command(&cek_titik_cmd);
	//tinysh_add_command(&set_titik_cmd);
	
	tinysh_add_command(&save_sumber_cmd);
	//tinysh_add_command(&save_mesin_cmd);
	//tinysh_add_command(&save_titik_cmd);
#endif


#ifdef BOARD_KOMON_A_RTD
	tinysh_add_command(&cek_adc_cmd);
	tinysh_add_command(&set_kanal_cmd);
#endif

#ifdef BOARD_KOMON_420_SAJA
#ifdef PAKAI_ADC
	tinysh_add_command(&cek_adc_cmd);
	tinysh_add_command(&lihat_data_cmd);
#endif
	tinysh_add_command(&set_kanal_cmd);
#endif

#ifdef BOARD_KOMON_420_SABANG
#ifdef PAKAI_ADC
	tinysh_add_command(&cek_adc_cmd);
	//tinysh_add_command(&lihat_data_cmd);

	tinysh_add_command(&set_kanal_cmd);
#endif
#endif

#ifdef BOARD_KOMON_B_THERMO
	tinysh_add_command(&cek_adc_cmd);
	tinysh_add_command(&set_kanal_cmd);
#endif

#ifdef PAKE_TELNETD
	tinysh_add_command(&matikan_telnet_cmd);
#endif

#ifdef PAKAI_PM
//	tinysh_add_command(&cek_pm_cmd);
//	tinysh_add_command(&set_pm_cmd);
//	tinysh_add_command(&cek_konfig_pmnya_cmd);
#endif	
	
#ifdef PAKAI_GSM_FTP
	tinysh_add_command(&set_modem_ftp_cmd);
	tinysh_add_command(&cek_modem_cmd);
	tinysh_add_command(&set_modem_gsm_cmd);
	tinysh_add_command(&gsm_ftp_cmd);
	tinysh_add_command(&cek_ftp_cmd);
	
#endif	

#ifdef PAKAI_SMS
	tinysh_add_command(&cek_pulsa_cmd);
	tinysh_add_command(&kirim_sms_cmd);
	tinysh_add_command(&hapus_sms_cmd);
	tinysh_add_command(&baca_sms_cmd);
	tinysh_add_command(&baca_sms_semua_cmd);
	tinysh_add_command(&sms_monita_cmd);
#endif 

#ifdef PAKAI_CRON
	tinysh_add_command(&set_cron_cmd);
	tinysh_add_command(&cek_cron_cmd);
#endif

//#ifdef CARI_SUMBERNYA
#ifdef BOARD_TAMPILAN
	tinysh_add_command(&cek_group_cmd);
	tinysh_add_command(&set_group_cmd);
	
	//tinysh_add_command(&cek_sumber_cmd);
	//tinysh_add_command(&set_sumber_cmd);
	
	// data
	//tinysh_add_command(&set_data_cmd);
	//tinysh_add_command(&cek_data_cmd);
	//printf("board_tampilan\r\n");

#endif
vTaskDelay(100);
#ifdef BANYAK_SUMBER
	tinysh_add_command(&cek_sumber_cmd);
	tinysh_add_command(&set_sumber_cmd);
	tinysh_add_command(&set_data_cmd);
	tinysh_add_command(&cek_data_cmd);
	//printf("banyak sumber\r\n");
#endif
vTaskDelay(100);

#if (VERSI_KONFIGx == 2)
	tinysh_add_command(&cek_group_cmd);
	tinysh_add_command(&set_group_cmd);
	
	tinysh_add_command(&cek_sumber_cmd);
	tinysh_add_command(&set_sumber_cmd);
	
	// data
	tinysh_add_command(&set_data_cmd);
	tinysh_add_command(&cek_data_cmd);
#endif	

// simpan file
#ifdef PAKAI_FILE_SIMPAN	
	tinysh_add_command(&cek_file_cmd);
	tinysh_add_command(&set_file_cmd);
	tinysh_add_command(&del_direktori_cmd);
	tinysh_add_command(&cari_doku_cmd);
	tinysh_add_command(&hapus_filenya_cmd);
#endif


#ifdef CENDOL
	tinysh_add_command(&cek_konfig_cmd);
	tinysh_add_command(&set_konfig_cmd);
#endif

#ifdef PAKAI_MULTI_SERIAL
	#if defined(PAKAI_SERIAL_1) || defined(PAKAI_SERIAL_2) || defined(PAKAI_SERIAL_3)
		tinysh_add_command(&kirim_serial_cmd);
	#endif
#endif
	/* add sub commands
 	*/
  	//tinysh_add_command(&ctxcmd);
  	//tinysh_add_command(&item1);
  	//tinysh_add_command(&item2);

	/* use a command from the stack
 	* !!! this is only possible because the shell will have exited
 	* before the stack of function main !!!
 	*/
  	/*
	{
    	tinysh_cmd_t quitcmd={0,"quit","exit shell",0,reset_to_0,
                          (void *)&again,0,0};
    	tinysh_add_command(&quitcmd);
  	}*/

	/* add atoxi support test command */
  	//tinysh_add_command(&atoxi_cmd);



	/* add a background command */
  	//tinysh_add_command(&bgcmd);
  	//xTaskCreate( bg_cmd_thread, "bg_cmd", 1000, NULL, 2, &xHandle);

	#ifdef PAKAI_MMC
  	vTaskDelay(340);
  	#else
  	vTaskDelay(450);
  	#endif

	#ifdef PAKAI_SELENOID
		static tinysh_cmd_t set_relay_cmd={0,"set_relay","setting relay", "help default ",set_relay,0,0,0};
		tinysh_add_command(&set_relay_cmd);
	#endif
	
	
//#ifdef BOARD_TAMPILAN	
	#ifdef CARI_SUMBERx	
	// cek ukuran struk
	printf("size struct Mesin  = %d\r\n", sizeof (struct t_mesin) * JML_MESIN);
	printf("size struct Sumber = %d\r\n", sizeof (struct t_sumber) * JML_SUMBER);
	printf("size struct Titik  = %d\r\n", sizeof (struct t_titik) * JML_MESIN * TIAP_MESIN);
	//printf("size struct sambungan = %d\r\n", sizeof (samb));
	#endif
	
	#ifdef BOARD_KOMON_420_SAJA
	kalibrasi_adc1();
	vTaskDelay(100);
	start_adc_1();
	#endif
	
	#ifdef BOARD_KOMON_420_SABANG
		#ifdef PAKAI_ADC
			kalibrasi_adc1();
			vTaskDelay(100);
			start_adc_1();
		#endif
		vTaskDelay(100);
	#endif
	
	#ifdef BOARD_KOMON_A_RTD
	kalibrasi_adc1();
	vTaskDelay(100);
	start_adc_1();
	#endif
	
	#ifdef BOARD_KOMON_B_THERMO
	kalibrasi_adc1();
	vTaskDelay(100);
	start_adc_1();
	#endif
	
	#ifdef BOARD_KOMON_KONTER
		#ifdef PAKAI_RTC
		rtc_init();
		vTaskDelay(100);
		//baca_rtc_mem();
		#endif
	#endif
	
	#ifdef PAKAI_MMC
	tinysh_add_command(&util_ls_cmd);
	tinysh_add_command(&util_mkdir_cmd);
	tinysh_add_command(&util_cd_cmd);
	tinysh_add_command(&util_pwd_cmd);
	tinysh_add_command(&util_view_cmd);
	
	init_gpio_mmc();
	uncs_mmc();
	vTaskDelay(5);
	set_fs_mount();
	vTaskDelay(5);
	status_MMC = cek_fs_free();
	
	struct t_simpan_file *ts;
	ts = (char *) ALMT_SFILE;
	vTaskDelay(5);
	
	if (status_MMC) {
		printf("_____MMC ERROR !!!!_____ %d\r\n", status_MMC);
		if (status_MMC==13) 
			printf("_____MMC FR_NO_FILESYSTEM, kudu diformat FAT32 !!!\r\n");
		
		if (ts->set==1) {
			set_file_mati();
			printf("simpan data ke file dimatikan !!\r\n");
		}
	} else {
		status_MMC = 1;
		printf("MMC aktif. Siap simpan data: %d\r\n", status_MMC);
	}
	/*
	FR_NOT_READY,		3 
	FR_NO_FILE,			4 
	FR_NO_PATH,			5 
	FR_INVALID_NAME,	6 
	FR_DENIED,			7 
	FR_EXIST,			8 
	FR_INVALID_OBJECT,	9 
	FR_WRITE_PROTECTED,	10
	FR_INVALID_DRIVE,	11
	FR_NOT_ENABLED,		12
	FR_NO_FILESYSTEM,	13
	FR_MKFS_ABORTED,	14
	FR_TIMEOUT			15
	//*/
	
	
	sprintf(abs_path, "%s", "");
	#endif
	
	#ifdef PAKAI_RTC	
	tinysh_add_command(&set_date_cmd);
	#endif
	
	
	struct t_env *envx;
	envx = (char *) ALMT_ENV;

	sprintf(str,"%s%d$ ", PROMPT, (envx->IP3));
	tinysh_set_prompt(str);
	//tinysh_set_prompt( PROMPT );
	/* force untuk tampil prompt */
	tinysh_char_in('\r');
	int perdetiknya=0;

	/*
	printf("nChr: %d, nInt: %d, nLInt: %d, nFloat: %d, nDouble: %d\r\n", \
		sizeof(char), sizeof(int), sizeof(long int), sizeof(float), sizeof(double));
	printf("nChr: %d, nInt: %d, nLInt: %d, nFloat: %d, nDouble: %d\r\n", \
		255, 20000000, 20000000, 20000000, 20000000);
	//*/
	/*
	 * main loop shell
  	 */
  	int lop = 0;
  	while(1)
    {
		vTaskDelay(1);
	  lop++;
	  if (xSerialGetChar(1, &c, 100 ) == pdTRUE)
	  {
			lop = 0;
			tinysh_char_in((unsigned char)c);
	  }	
	  
	  /* dilindungi password setiap menit tidak ada aktifitas*/
	  if (lop > 6000)
	  {
			lop = 0;
			printf("\r\nPasswd lock!\r\n");
			while(1)
			{
				if (xSerialGetChar(1, &c, 100) == pdTRUE)	{
					if (proses_passwd( &c ) == 1) break;
				}
				#ifdef PAKAI_MMC
					#ifdef PAKAI_FILE_SIMPAN
						perdetiknya++;
						if (perdetiknya==10 && status_MMC==1) {
							proses_simpan_file();
							perdetiknya=0;
						}
					#endif
				#endif
				
				#ifdef PAKAI_ADC
					#ifdef BOARD_KOMON_A_RTD
					proses_data_adc();
					#endif
					 
					#ifdef BOARD_KOMON_B_THERMO
					proses_data_adc();
					#endif
					
					#ifdef BOARD_KOMON_420_SABANG
					proses_data_adc();
					#endif
					
					#ifdef BOARD_KOMON_420_SAJA
					proses_data_adc();
					hitung_datanya();
					#endif
					
					simpan_ke_data_f();
				#endif
				
				#ifdef BOARD_KOMON_KONTER
					data_frek_rpm();
				#endif
			}
	  }
	  
		// pembacaaan ADC dipindah dari task eth ke shell 1 Okt 2010.
		#ifdef PAKAI_ADC
			#ifdef BOARD_KOMON_A_RTD
				proses_data_adc();
			#endif
		 
			#ifdef BOARD_KOMON_B_THERMO
				proses_data_adc();
			#endif
				 
			#ifdef BOARD_KOMON_420_SAJA
				proses_data_adc();
				hitung_datanya();
			#endif
			
			#ifdef BOARD_KOMON_420_SABANG
				proses_data_adc();
			#endif
			
			simpan_ke_data_f();
		#endif
		
		#ifdef BOARD_KOMON_KONTER
			data_frek_rpm();
		#endif
	  
		#ifdef PAKAI_MMC
			#ifdef PAKAI_FILE_SIMPAN
				perdetiknya++;
				if (perdetiknya==10 && status_MMC==1) {
					proses_simpan_file();
					perdetiknya=0;
				}
			#endif
		#endif
	  
	  #ifdef USB_TEST
	  c = HC_INT_STAT ;
	  {
	  	printf("%4d: usb stat 0x%X\r\n", lop, c);
	  	
	  	HC_INT_STAT |= c;
	  	
	  	usb_terup = 0;
	  }
	  #endif
    }
  	
  	return;
}
Ejemplo n.º 3
0
void cmd_shell()	{
#ifdef PAKAI_TINYSH
	#ifdef PAKAI_CONTOH_SHELL
	tinysh_add_command(&myfoocmd);
	#endif
	
	tinysh_add_command(&cek_env_cmd);
	tinysh_add_command(&set_env_cmd);
	tinysh_add_command(&cek_struct_cmd);

	tinysh_add_command(&set_kanal_cmd);
	tinysh_add_command(&cek_kanal_cmd);
	
	tinysh_add_command(&set_data_cmd);
	tinysh_add_command(&cek_data_cmd);
	
	tinysh_add_command(&cek_sumber_cmd);
	tinysh_add_command(&set_sumber_cmd);
//	tinysh_add_command(&cek_sumber_temp_cmd);
	
	tinysh_add_command(&reset_cmd);
	tinysh_add_command(&task_list_cmd);
	tinysh_add_command(&cek_stack_cmd);
//	tinysh_add_command(&task_run_time_cmd);
	tinysh_add_command(&idle_tick_cmd);
	
	
	tinysh_add_command(&sektor_free_cmd);
	tinysh_add_command(&hapus_sektor_rom_cmd);
	tinysh_add_command(&simpan_sektor_rom_cmd);
	tinysh_add_command(&simpan_struct_rom_cmd);
	tinysh_add_command(&kopi_sektor_cmd);
	
	tinysh_add_command(&baca_rom_cmd);

	
	#ifdef PAKAI_ADC_7708
	tinysh_add_command(&cek_adc_cmd);
	#endif
	
	#ifdef PAKAI_RTC
	tinysh_add_command(&set_date_cmd);
	//tinysh_add_command(&cek_flag_rtc_cmd);
	//tinysh_add_command(&init_rtc_cmd);
	tinysh_add_command(&kalender_rtc_cmd);
	tinysh_add_command(&uptime_cmd);
	tinysh_add_command(&set_rtc_mem_cmd);
	tinysh_add_command(&cek_rtc_mem_cmd);
	#endif

#if 0
	#ifdef PAKAI_SDCARD
	tinysh_add_command(&cek_sdc_cmd);
	tinysh_add_command(&cek_free_cluster_cmd);
	tinysh_add_command(&cek_read_cmd);
	//tinysh_add_command(&cek_read_sektor_cmd);
	tinysh_add_command(&cek_pwd_cmd);
	tinysh_add_command(&cek_ls_cmd);
	#endif
#endif

	#ifdef PAKAI_SDCARD
	tinysh_add_command(&util_cd_cmd);
	tinysh_add_command(&util_pwd_cmd);
	tinysh_add_command(&util_ls_cmd);
	tinysh_add_command(&util_mkdir_cmd);
	tinysh_add_command(&util_view_cmd);
	tinysh_add_command(&util_rm_cmd);
	tinysh_add_command(&simpan_file_cmd);
	
	tinysh_add_command(&cek_file_cmd);
	tinysh_add_command(&set_file_cmd);
	tinysh_add_command(&upload_file_cmd);
	#endif

#endif
}