/* CBM-II-specific initialization. */
int machine_specific_init(void)
{
cbm2_log = log_open("CBM2");
cbm2_init_ok = 1;
event_init();
/* Setup trap handling - must be before mem_load() */
traps_init();
if (mem_load() < 0) {
return -1;
}
if (!video_disabled_mode) {
joystick_init();
}
gfxoutput_init();
rs232drv_init();
/* initialize print devices */
printer_init();
if (vicii_init(VICII_STANDARD) == NULL) {
return -1;
}
/*
c500_set_phi1_bank(15);
c500_set_phi2_bank(15);
*/
c500_powerline_clk_alarm = alarm_new(maincpu_alarm_context,
"C500PowerlineClk",
c500_powerline_clk_alarm_handler,
NULL);
clk_guard_add_callback(maincpu_clk_guard,
c500_powerline_clk_overflow_callback, NULL);
machine_timing.cycles_per_sec = C500_PAL_CYCLES_PER_SEC;
machine_timing.rfsh_per_sec = C500_PAL_RFSH_PER_SEC;
machine_timing.cycles_per_rfsh = C500_PAL_CYCLES_PER_RFSH;
cia1_init(machine_context.cia1);
acia1_init();
tpi1_init(machine_context.tpi1);
tpi2_init(machine_context.tpi2);
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (cbm2_kbd_init() < 0) {
return -1;
}
#endif
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level 1541 emulation. */
drive_init();
disk_image_init();
cbm2_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize native sound chip */
sid_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer.
This appears to work but doesn't account for banking. */
kbdbuf_init(939, 209, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
/* Initialize the CBM-II-specific part of the UI. */
cbm5x0ui_init();
cbm2iec_init();
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("VICIIFullscreen", 1);
}
}
#endif
return 0;
}
/* CBM-II-specific initialization. */
int machine_specific_init(void)
{
cbm2_log = log_open("CBM2");
cbm2_init_ok = 1;
/* Setup trap handling - must be before mem_load() */
traps_init();
if (mem_load() < 0) {
return -1;
}
rs232drv_init();
/* initialize print devices */
printer_init();
if (crtc_init() == NULL) {
return -1;
}
crtc_set_retrace_callback(cbm2_crtc_signal);
crtc_set_retrace_type(0);
crtc_set_hw_options(1, 0x7ff, 0x1000, 512, -0x2000);
cia1_init(machine_context.cia1);
acia1_init();
tpi1_init(machine_context.tpi1);
tpi2_init(machine_context.tpi2);
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (cbm2_kbd_init() < 0) {
return -1;
}
#endif
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level 1541 emulation. */
drive_init();
cbm2_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize native sound chip */
sid_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer.
This appears to work but doesn't account for banking. */
kbdbuf_init(939, 209, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
/* Initialize the CBM-II-specific part of the UI. */
cbm2ui_init();
cbm2iec_init();
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && \
(defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("CRTCFullscreen", 1);
}
}
#endif
return 0;
}
/* CBM-II-specific initialization. */
int machine_specific_init(void)
{
cbm2_log = log_open("CBM2");
cbm2_init_ok = 1;
event_init();
/* Setup trap handling - must be before mem_load() */
traps_init();
if (mem_load() < 0) {
return -1;
}
if (!video_disabled_mode) {
joystick_init();
}
gfxoutput_init();
rs232drv_init();
/* initialize print devices */
printer_init();
#ifdef USE_BEOS_UI
/* Pre-init CBM-II-specific parts of the menus before crtc_init()
creates a canvas window with a menubar at the top. This could
also be used by other ports, e.g. GTK+... */
cbm2ui_init_early();
#endif
if (crtc_init() == NULL) {
return -1;
}
crtc_set_retrace_callback(cbm2_crtc_signal);
crtc_set_retrace_type(0);
crtc_set_hw_options(1, 0x7ff, 0x1000, 512, -0x2000);
cia1_init(machine_context.cia1);
acia1_init();
tpi1_init(machine_context.tpi1);
tpi2_init(machine_context.tpi2);
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (cbm2_kbd_init() < 0) {
return -1;
}
#endif
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level 1541 emulation. */
drive_init();
disk_image_init();
cbm2_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize native sound chip */
sid_sound_chip_init();
/* Initialize userport based sound chips */
userport_dac_sound_chip_init();
userport_digimax_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer.
This appears to work but doesn't account for banking. */
kbdbuf_init(939, 209, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
/* Initialize the CBM-II-specific part of the UI. */
cbm2ui_init();
cbm2iec_init();
#ifdef HAVE_MOUSE
/* Initialize mouse support (if present). */
mouse_init();
#endif
machine_drive_stub();
/* Initialize the CBM2-specific I/O */
cbm2io_init();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("CRTCFullscreen", 1);
}
}
#endif
return 0;
}
/* CBM-II-specific initialization. */
int machine_specific_init(void)
{
cbm2_log = log_open("CBM2");
cbm2_init_ok = 1;
/* Setup trap handling - must be before mem_load() */
traps_init();
if (mem_load() < 0)
return -1;
rs232drv_init();
/* initialize print devices */
printer_init();
if (!cbm2_isC500) {
if (crtc_init() == NULL)
return -1;
crtc_set_retrace_callback(cbm2_crtc_signal);
crtc_set_retrace_type(0);
crtc_set_hw_options(1, 0x7ff, 0x1000, 512, -0x2000);
} else {
if (vicii_init(VICII_STANDARD) == NULL)
return -1;
/*
c500_set_phi1_bank(15);
c500_set_phi2_bank(15);
*/
c500_powerline_clk_alarm = alarm_new(maincpu_alarm_context,
"C500PowerlineClk",
c500_powerline_clk_alarm_handler,
NULL);
clk_guard_add_callback(maincpu_clk_guard,
c500_powerline_clk_overflow_callback, NULL);
machine_timing.cycles_per_sec = C500_PAL_CYCLES_PER_SEC;
machine_timing.rfsh_per_sec = C500_PAL_RFSH_PER_SEC;
machine_timing.cycles_per_rfsh = C500_PAL_CYCLES_PER_RFSH;
}
cia1_init(machine_context.cia1);
acia1_init();
tpi1_init(machine_context.tpi1);
tpi2_init(machine_context.tpi2);
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (cbm2_kbd_init() < 0)
return -1;
#endif
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level 1541 emulation. */
drive_init();
cbm2_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize the CBM-II-specific part of the UI. */
cbm2ui_init();
cbm2iec_init();
machine_drive_stub();
return 0;
}
