static void tty_ldisc_reinit(struct tty_struct *tty)
{
struct tty_ldisc *ld;
WARN_ON_ONCE(tty_ldisc_wait_idle(tty));
tty_ldisc_close(tty, tty->ldisc);
tty_ldisc_put(tty->ldisc);
tty->ldisc = NULL;
/*
* Switch the line discipline back
*/
ld = tty_ldisc_get(N_TTY);
BUG_ON(IS_ERR(ld));
tty_ldisc_assign(tty, ld);
tty_set_termios_ldisc(tty, N_TTY);
}
static void tty_ldisc_kill(struct tty_struct *tty)
{
/* There cannot be users from userspace now. But there still might be
* drivers holding a reference via tty_ldisc_ref. Do not steal them the
* ldisc until they are done. */
tty_ldisc_wait_idle(tty, MAX_SCHEDULE_TIMEOUT);
mutex_lock(&tty->ldisc_mutex);
/*
* Now kill off the ldisc
*/
tty_ldisc_close(tty, tty->ldisc);
tty_ldisc_put(tty->ldisc);
/* Force an oops if we mess this up */
tty->ldisc = NULL;
/* Ensure the next open requests the N_TTY ldisc */
tty_set_termios_ldisc(tty, N_TTY);
mutex_unlock(&tty->ldisc_mutex);
}
static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
{
struct tty_ldisc *ld = tty_ldisc_get(ldisc);
if (IS_ERR(ld))
return -1;
WARN_ON_ONCE(tty_ldisc_wait_idle(tty));
tty_ldisc_close(tty, tty->ldisc);
tty_ldisc_put(tty->ldisc);
tty->ldisc = NULL;
/*
* Switch the line discipline back
*/
tty_ldisc_assign(tty, ld);
tty_set_termios_ldisc(tty, ldisc);
return 0;
}
int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
int retval;
struct tty_ldisc *o_ldisc, *new_ldisc;
int work, o_work = 0;
struct tty_struct *o_tty;
new_ldisc = tty_ldisc_get(ldisc);
if (IS_ERR(new_ldisc))
return PTR_ERR(new_ldisc);
tty_lock();
/*
* We need to look at the tty locking here for pty/tty pairs
* when both sides try to change in parallel.
*/
o_tty = tty->link; /* o_tty is the pty side or NULL */
/*
* Check the no-op case
*/
if (tty->ldisc->ops->num == ldisc) {
tty_unlock();
tty_ldisc_put(new_ldisc);
return 0;
}
tty_unlock();
/*
* Problem: What do we do if this blocks ?
* We could deadlock here
*/
tty_wait_until_sent(tty, 0);
tty_lock();
mutex_lock(&tty->ldisc_mutex);
/*
* We could be midstream of another ldisc change which has
* dropped the lock during processing. If so we need to wait.
*/
while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
mutex_unlock(&tty->ldisc_mutex);
tty_unlock();
wait_event(tty_ldisc_wait,
test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
tty_lock();
mutex_lock(&tty->ldisc_mutex);
}
set_bit(TTY_LDISC_CHANGING, &tty->flags);
/*
* No more input please, we are switching. The new ldisc
* will update this value in the ldisc open function
*/
tty->receive_room = 0;
o_ldisc = tty->ldisc;
tty_unlock();
/*
* Make sure we don't change while someone holds a
* reference to the line discipline. The TTY_LDISC bit
* prevents anyone taking a reference once it is clear.
* We need the lock to avoid racing reference takers.
*
* We must clear the TTY_LDISC bit here to avoid a livelock
* with a userspace app continually trying to use the tty in
* parallel to the change and re-referencing the tty.
*/
work = tty_ldisc_halt(tty);
if (o_tty)
o_work = tty_ldisc_halt(o_tty);
/*
* Wait for ->hangup_work and ->buf.work handlers to terminate.
* We must drop the mutex here in case a hangup is also in process.
*/
mutex_unlock(&tty->ldisc_mutex);
tty_ldisc_flush_works(tty);
retval = tty_ldisc_wait_idle(tty);
tty_lock();
mutex_lock(&tty->ldisc_mutex);
/* handle wait idle failure locked */
if (retval) {
tty_ldisc_put(new_ldisc);
goto enable;
}
if (test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
clear_bit(TTY_LDISC_CHANGING, &tty->flags);
mutex_unlock(&tty->ldisc_mutex);
tty_ldisc_put(new_ldisc);
tty_unlock();
return -EIO;
}
/* Shutdown the current discipline. */
tty_ldisc_close(tty, o_ldisc);
/* Now set up the new line discipline. */
tty_ldisc_assign(tty, new_ldisc);
tty_set_termios_ldisc(tty, ldisc);
retval = tty_ldisc_open(tty, new_ldisc);
if (retval < 0) {
/* Back to the old one or N_TTY if we can't */
tty_ldisc_put(new_ldisc);
tty_ldisc_restore(tty, o_ldisc);
}
/* At this point we hold a reference to the new ldisc and a
a reference to the old ldisc. If we ended up flipping back
to the existing ldisc we have two references to it */
if (tty->ldisc->ops->num != o_ldisc->ops->num && tty->ops->set_ldisc)
tty->ops->set_ldisc(tty);
tty_ldisc_put(o_ldisc);
enable:
/*
* Allow ldisc referencing to occur again
*/
tty_ldisc_enable(tty);
if (o_tty)
tty_ldisc_enable(o_tty);
/* Restart the work queue in case no characters kick it off. Safe if
already running */
if (work)
schedule_work(&tty->buf.work);
if (o_work)
schedule_work(&o_tty->buf.work);
mutex_unlock(&tty->ldisc_mutex);
tty_unlock();
return retval;
}
void tty_ldisc_hangup(struct tty_struct *tty)
{
struct tty_ldisc *ld;
int reset = tty->driver->flags & TTY_DRIVER_RESET_TERMIOS;
int err = 0;
/*
* FIXME! What are the locking issues here? This may me overdoing
* things... This question is especially important now that we've
* removed the irqlock.
*/
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
/* We may have no line discipline at this point */
if (ld->ops->flush_buffer)
ld->ops->flush_buffer(tty);
tty_driver_flush_buffer(tty);
if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
ld->ops->write_wakeup)
ld->ops->write_wakeup(tty);
if (ld->ops->hangup)
ld->ops->hangup(tty);
tty_ldisc_deref(ld);
}
/*
* FIXME: Once we trust the LDISC code better we can wait here for
* ldisc completion and fix the driver call race
*/
wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
wake_up_interruptible_poll(&tty->read_wait, POLLIN);
/*
* Shutdown the current line discipline, and reset it to
* N_TTY if need be.
*
* Avoid racing set_ldisc or tty_ldisc_release
*/
mutex_lock(&tty->ldisc_mutex);
/*
* this is like tty_ldisc_halt, but we need to give up
* the BTM before calling cancel_work_sync, which may
* need to wait for another function taking the BTM
*/
clear_bit(TTY_LDISC, &tty->flags);
tty_unlock(tty);
cancel_work_sync(&tty->port->buf.work);
mutex_unlock(&tty->ldisc_mutex);
retry:
tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
/* At this point we have a closed ldisc and we want to
reopen it. We could defer this to the next open but
it means auditing a lot of other paths so this is
a FIXME */
if (tty->ldisc) { /* Not yet closed */
if (atomic_read(&tty->ldisc->users) != 1) {
char cur_n[TASK_COMM_LEN], tty_n[64];
long timeout = 3 * HZ;
tty_unlock(tty);
while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
timeout = MAX_SCHEDULE_TIMEOUT;
printk_ratelimited(KERN_WARNING
"%s: waiting (%s) for %s took too long, but we keep waiting...\n",
__func__, get_task_comm(cur_n, current),
tty_name(tty, tty_n));
}
mutex_unlock(&tty->ldisc_mutex);
goto retry;
}
if (reset == 0) {
if (!tty_ldisc_reinit(tty, tty->termios.c_line))
err = tty_ldisc_open(tty, tty->ldisc);
else
err = 1;
}
/* If the re-open fails or we reset then go to N_TTY. The
N_TTY open cannot fail */
if (reset || err) {
BUG_ON(tty_ldisc_reinit(tty, N_TTY));
WARN_ON(tty_ldisc_open(tty, tty->ldisc));
}
tty_ldisc_enable(tty);
}
mutex_unlock(&tty->ldisc_mutex);
if (reset)
tty_reset_termios(tty);
}