void em28xx_card_setup(struct em28xx *dev)
{
/* request some modules */
switch(dev->model){
case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
{
struct tveeprom tv;
#ifdef CONFIG_MODULES
request_module("tveeprom");
request_module("ir-kbd-i2c");
request_module("msp3400");
#endif
/* Call first TVeeprom */
dev->i2c_client.addr = 0xa0 >> 1;
tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
dev->tuner_type= tv.tuner_type;
if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
dev->i2s_speed=2048000;
dev->has_msp34xx=1;
} else
dev->has_msp34xx=0;
break;
}
case EM2820_BOARD_KWORLD_PVRTV2800RF:
{
em28xx_write_regs_req(dev,0x00,0x08, "\xf9", 1); // GPIO enables sound on KWORLD PVR TV 2800RF
break;
}
}
}
static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
{
struct tveeprom tv;
tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data);
dev->board.tuner_type = tv.tuner_type;
/* Make sure we support the board model */
switch (tv.model) {
case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and analog video */
case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
break;
default:
printk(KERN_WARNING "%s: warning: "
"unknown hauppauge model #%d\n", __func__, tv.model);
break;
}
printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
__func__, tv.model);
}
/* Hauppauge card? get values from tveeprom */
void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv)
{
struct i2c_client c;
u8 eedata[256];
memset(&c, 0, sizeof(c));
strlcpy(c.name, "cx18 tveeprom tmp", sizeof(c.name));
c.adapter = &cx->i2c_adap[0];
c.addr = 0xA0 >> 1;
memset(tv, 0, sizeof(*tv));
if (tveeprom_read(&c, eedata, sizeof(eedata)))
return;
switch (cx->card->type) {
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
case CX18_CARD_HVR_1600_S5H1411:
tveeprom_hauppauge_analog(&c, tv, eedata);
break;
case CX18_CARD_YUAN_MPC718:
case CX18_CARD_GOTVIEW_PCI_DVD3:
tv->model = 0x718;
cx18_eeprom_dump(cx, eedata, sizeof(eedata));
CX18_INFO("eeprom PCI ID: %02x%02x:%02x%02x\n",
eedata[2], eedata[1], eedata[4], eedata[3]);
break;
default:
tv->model = 0xffffffff;
cx18_eeprom_dump(cx, eedata, sizeof(eedata));
break;
}
}
static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
{
struct tveeprom tv;
tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data);
dev->board.tuner_type = tv.tuner_type;
switch (tv.model) {
case 72000:
case 72001:
case 72101:
case 72201:
case 72211:
case 72221:
case 72231:
case 72241:
case 72251:
case 72261:
case 72301:
case 72500:
break;
default:
printk(KERN_WARNING "%s: warning: "
"unknown hauppauge model #%d\n", __func__, tv.model);
break;
}
printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
__func__, tv.model);
}
/* Hauppauge card? get values from tveeprom */
void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv)
{
u8 eedata[256];
cx->i2c_client[0].addr = 0xA0 >> 1;
tveeprom_read(&cx->i2c_client[0], eedata, sizeof(eedata));
tveeprom_hauppauge_analog(&cx->i2c_client[0], tv, eedata);
}
/* Hauppauge card? get values from tveeprom */
void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv)
{
u8 eedata[256];
itv->i2c_client.addr = 0xA0 >> 1;
tveeprom_read(&itv->i2c_client, eedata, sizeof(eedata));
tveeprom_hauppauge_analog(&itv->i2c_client, tv, eedata);
}
static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
{
struct tveeprom tv;
tveeprom_hauppauge_analog(&core->i2c_client, &tv, eeprom_data);
core->tuner_type = tv.tuner_type;
core->has_radio = tv.has_radio;
}
static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
{
struct tveeprom tv;
tveeprom_hauppauge_analog(&core->i2c_client, &tv, eeprom_data);
core->tuner_type = tv.tuner_type;
core->tuner_formats = tv.tuner_formats;
core->has_radio = tv.has_radio;
/* Make sure we support the board model */
switch (tv.model)
{
case 14009: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in) */
case 14019: /* WinTV-HVR3000 (Retail, IR Blaster, b/panel video, 3.5mm audio in) */
case 14029: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - 880 bridge) */
case 14109: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - low profile) */
case 14129: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - 880 bridge - LP) */
case 14559: /* WinTV-HVR3000 (OEM, no IR, b/panel video, 3.5mm audio in) */
case 14569: /* WinTV-HVR3000 (OEM, no IR, no back panel video) */
case 14659: /* WinTV-HVR3000 (OEM, no IR, b/panel video, RCA audio in - Low profile) */
case 14669: /* WinTV-HVR3000 (OEM, no IR, no b/panel video - Low profile) */
case 28552: /* WinTV-PVR 'Roslyn' (No IR) */
case 34519: /* WinTV-PCI-FM */
case 90002: /* Nova-T-PCI (9002) */
case 92001: /* Nova-S-Plus (Video and IR) */
case 92002: /* Nova-S-Plus (Video and IR) */
case 90003: /* Nova-T-PCI (9002 No RF out) */
case 90500: /* Nova-T-PCI (oem) */
case 90501: /* Nova-T-PCI (oem/IR) */
case 92000: /* Nova-SE2 (OEM, No Video or IR) */
case 94009: /* WinTV-HVR1100 (Video and IR Retail) */
case 94501: /* WinTV-HVR1100 (Video and IR OEM) */
case 96009: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX) */
case 96019: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX/TX) */
case 96559: /* WinTV-HVR1300 (PAL Video, MPEG Video no IR) */
case 96569: /* WinTV-HVR1300 () */
case 96659: /* WinTV-HVR1300 () */
case 98559: /* WinTV-HVR1100LP (Video no IR, Retail - Low Profile) */
/* known */
break;
default:
printk("%s: warning: unknown hauppauge model #%d\n",
core->name, tv.model);
break;
}
printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
core->name, tv.model);
}
static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data)
{
struct tveeprom tv;
/* TODO: Assumption: eeprom on bus 0 */
tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv,
eeprom_data);
/* Make sure we support the board model */
switch (tv.model) {
case 88001:
/* Development board - Limit circulation */
/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
* ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
case 88021:
/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
* ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */
break;
case 88041:
/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
* ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
break;
case 88061:
/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
* ATSC/QAM (TDA18271/S5H1411) and basic analog, FM */
break;
case 89519:
case 89609:
/* WinTV-HVR2200 (PCIe, Retail, full-height)
* DVB-T (TDA18271/TDA10048) and basic analog, no IR */
break;
case 89619:
/* WinTV-HVR2200 (PCIe, Retail, half-height)
* DVB-T (TDA18271/TDA10048) and basic analog, no IR */
break;
default:
printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n",
dev->name, tv.model);
break;
}
printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name,
tv.model);
}
static int mxl111sf_init(struct dvb_usb_device *d)
{
struct mxl111sf_state *state = d_to_priv(d);
int ret;
static u8 eeprom[256];
struct i2c_client c;
ret = get_chip_info(state);
if (mxl_fail(ret))
err("failed to get chip info during probe");
mutex_init(&state->fe_lock);
if (state->chip_rev > MXL111SF_V6)
mxl111sf_config_pin_mux_modes(state, PIN_MUX_TS_SPI_IN_MODE_1);
c.adapter = &d->i2c_adap;
c.addr = 0xa0 >> 1;
ret = tveeprom_read(&c, eeprom, sizeof(eeprom));
if (mxl_fail(ret))
return 0;
tveeprom_hauppauge_analog(&c, &state->tv, (0x84 == eeprom[0xa0]) ?
eeprom + 0xa0 : eeprom + 0x80);
#if 0
switch (state->tv.model) {
case 117001:
case 126001:
case 138001:
break;
default:
printk(KERN_WARNING "%s: warning: "
"unknown hauppauge model #%d\n",
__func__, state->tv.model);
}
#endif
return 0;
}
static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
{
struct tveeprom tv;
tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv,
eeprom_data);
/* Make sure we support the board model */
switch (tv.model) {
case 71009:
/* WinTV-HVR1200 (PCIe, Retail, full height)
* DVB-T and basic analog */
case 71359:
/* WinTV-HVR1200 (PCIe, OEM, half height)
* DVB-T and basic analog */
case 71439:
/* WinTV-HVR1200 (PCIe, OEM, half height)
* DVB-T and basic analog */
case 71449:
/* WinTV-HVR1200 (PCIe, OEM, full height)
* DVB-T and basic analog */
case 71939:
/* WinTV-HVR1200 (PCIe, OEM, half height)
* DVB-T and basic analog */
case 71949:
/* WinTV-HVR1200 (PCIe, OEM, full height)
* DVB-T and basic analog */
case 71959:
/* WinTV-HVR1200 (PCIe, OEM, full height)
* DVB-T and basic analog */
case 71979:
/* WinTV-HVR1200 (PCIe, OEM, half height)
* DVB-T and basic analog */
case 71999:
/* WinTV-HVR1200 (PCIe, OEM, full height)
* DVB-T and basic analog */
case 76601:
/* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual
channel ATSC and MPEG2 HW Encoder */
case 77001:
/* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC
and Basic analog */
case 77011:
/* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC
and Basic analog */
case 77041:
/* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM
and Basic analog */
case 77051:
/* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM
and Basic analog */
case 78011:
/* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM,
Dual channel ATSC and MPEG2 HW Encoder */
case 78501:
/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
Dual channel ATSC and MPEG2 HW Encoder */
case 78521:
/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
Dual channel ATSC and MPEG2 HW Encoder */
case 78531:
/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM,
Dual channel ATSC and MPEG2 HW Encoder */
case 78631:
/* WinTV-HVR1800 (PCIe, OEM, No IR, No FM,
Dual channel ATSC and MPEG2 HW Encoder */
case 79001:
/* WinTV-HVR1250 (PCIe, Retail, IR, full height,
ATSC and Basic analog */
case 79101:
/* WinTV-HVR1250 (PCIe, Retail, IR, half height,
ATSC and Basic analog */
case 79561:
/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
ATSC and Basic analog */
case 79571:
/* WinTV-HVR1250 (PCIe, OEM, No IR, full height,
ATSC and Basic analog */
case 79671:
/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
ATSC and Basic analog */
case 80019:
/* WinTV-HVR1400 (Express Card, Retail, IR,
* DVB-T and Basic analog */
case 81509:
/* WinTV-HVR1700 (PCIe, OEM, No IR, half height)
* DVB-T and MPEG2 HW Encoder */
case 81519:
/* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
* DVB-T and MPEG2 HW Encoder */
break;
default:
printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n",
dev->name, tv.model);
break;
}
printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
dev->name, tv.model);
}
