/**
* @brief Send data and wait for prompt from DCE
*
* @param dte Modem DTE object
* @param data data buffer
* @param length length of data to send
* @param prompt pointer of specific prompt
* @param timeout timeout value (unit: ms)
* @return esp_err_t
* ESP_OK on success
* ESP_FAIL on error
*/
static esp_err_t esp_modem_dte_send_wait(modem_dte_t *dte, const char *data, uint32_t length,
const char *prompt, uint32_t timeout)
{
MODEM_CHECK(data, "data is NULL", err_param);
MODEM_CHECK(prompt, "prompt is NULL", err_param);
esp_modem_dte_t *esp_dte = __containerof(dte, esp_modem_dte_t, parent);
// We'd better disable pattern detection here for a moment in case prompt string contains the pattern character
uart_disable_pattern_det_intr(esp_dte->uart_port);
// uart_disable_rx_intr(esp_dte->uart_port);
MODEM_CHECK(uart_write_bytes(esp_dte->uart_port, data, length) >= 0, "uart write bytes failed", err_write);
uint32_t len = strlen(prompt);
uint8_t *buffer = calloc(len + 1, sizeof(uint8_t));
int res = uart_read_bytes(esp_dte->uart_port, buffer, len, pdMS_TO_TICKS(timeout));
MODEM_CHECK(res >= len, "wait prompt [%s] timeout", err, prompt);
MODEM_CHECK(!strncmp(prompt, (const char *)buffer, len), "get wrong prompt: %s", err, buffer);
free(buffer);
uart_enable_pattern_det_intr(esp_dte->uart_port, '\n', 1, MIN_PATTERN_INTERVAL, MIN_POST_IDLE, MIN_PRE_IDLE);
return ESP_OK;
err:
free(buffer);
err_write:
uart_enable_pattern_det_intr(esp_dte->uart_port, '\n', 1, MIN_PATTERN_INTERVAL, MIN_POST_IDLE, MIN_PRE_IDLE);
err_param:
return ESP_FAIL;
}
/**
* @brief Send data to DCE
*
* @param dte Modem DTE object
* @param data data buffer
* @param length length of data to send
* @return int actual length of data that has been send out
*/
static int esp_modem_dte_send_data(modem_dte_t *dte, const char *data, uint32_t length)
{
MODEM_CHECK(data, "data is NULL", err);
esp_modem_dte_t *esp_dte = __containerof(dte, esp_modem_dte_t, parent);
return uart_write_bytes(esp_dte->uart_port, data, length);
err:
return -1;
}
void init() {
const uart_config_t uart_config = {
.baud_rate = 115200,
.data_bits = UART_DATA_8_BITS,
.parity = UART_PARITY_DISABLE,
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE
};
uart_param_config(UART_NUM_1, &uart_config);
uart_set_pin(UART_NUM_1, TXD_PIN, RXD_PIN, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
// We won't use a buffer for sending data.
uart_driver_install(UART_NUM_1, RX_BUF_SIZE * 2, 0, 0, NULL, 0);
}
int sendData(const char* logName, const char* data)
{
const int len = strlen(data);
const int txBytes = uart_write_bytes(UART_NUM_1, data, len);
ESP_LOGI(logName, "Wrote %d bytes", txBytes);
return txBytes;
}
static void tx_task()
{
static const char *TX_TASK_TAG = "TX_TASK";
esp_log_level_set(TX_TASK_TAG, ESP_LOG_INFO);
while (1) {
sendData(TX_TASK_TAG, "Hello world");
vTaskDelay(2000 / portTICK_PERIOD_MS);
}
}
static void rx_task()
{
static const char *RX_TASK_TAG = "RX_TASK";
esp_log_level_set(RX_TASK_TAG, ESP_LOG_INFO);
uint8_t* data = (uint8_t*) malloc(RX_BUF_SIZE+1);
while (1) {
const int rxBytes = uart_read_bytes(UART_NUM_1, data, RX_BUF_SIZE, 1000 / portTICK_RATE_MS);
if (rxBytes > 0) {
data[rxBytes] = 0;
ESP_LOGI(RX_TASK_TAG, "Read %d bytes: '%s'", rxBytes, data);
ESP_LOG_BUFFER_HEXDUMP(RX_TASK_TAG, data, rxBytes, ESP_LOG_INFO);
}
}
free(data);
}
void app_main()
{
init();
xTaskCreate(rx_task, "uart_rx_task", 1024*2, NULL, configMAX_PRIORITIES, NULL);
xTaskCreate(tx_task, "uart_tx_task", 1024*2, NULL, configMAX_PRIORITIES-1, NULL);
}
/**
* @brief Send command to DCE
*
* @param dte Modem DTE object
* @param command command string
* @param timeout timeout value, unit: ms
* @return esp_err_t
* - ESP_OK on success
* - ESP_FAIL on error
*/
static esp_err_t esp_modem_dte_send_cmd(modem_dte_t *dte, const char *command, uint32_t timeout)
{
esp_err_t ret = ESP_FAIL;
modem_dce_t *dce = dte->dce;
MODEM_CHECK(dce, "DTE has not yet bind with DCE", err);
MODEM_CHECK(command, "command is NULL", err);
esp_modem_dte_t *esp_dte = __containerof(dte, esp_modem_dte_t, parent);
/* Calculate timeout clock tick */
/* Reset runtime information */
dce->state = MODEM_STATE_PROCESSING;
/* Send command via UART */
uart_write_bytes(esp_dte->uart_port, command, strlen(command));
/* Check timeout */
MODEM_CHECK(xSemaphoreTake(esp_dte->process_sem, pdMS_TO_TICKS(timeout)) == pdTRUE, "process command timeout", err);
ret = ESP_OK;
err:
dce->handle_line = NULL;
return ret;
}
static void uart_input_handler(const char *data, int len)
{
int i;
if (len < 1) {
return;
}
if (data[0] == 0x7f || data[0] == 0x08) {
if (rcvMsg.pWritePos != rcvMsg.pRcvMsgBuff) {
const char back = 0x08, space = ' ';
uart_write_bytes(UART_NUM_0, &back, 1);
uart_write_bytes(UART_NUM_0, &space, 1);
//uart_write_bytes(UART_NUM_0, &back, 1);
rcvMsg.pWritePos[0] = 0;
rcvMsg.pWritePos -= 1;
} else {
// nothing to delete
return;
}
}
if (data[0] == '\r' || data[0] == '\n') {
// enter key press
rcvMsg.pWritePos[0] = 0;
if (rcvMsg.pWritePos == rcvMsg.pRcvMsgBuff) {
uart_write_bytes(UART_NUM_0, PROMPT, PROMPT_LEN);
} else {
int length = rcvMsg.pWritePos - rcvMsg.pRcvMsgBuff;
uart_write_bytes(UART_NUM_0, PROMPT, PROMPT_LEN);
if (status == INPUT_SSID) {
memset(wifi_ssid, 0, WIFI_SSID_MAX_LEN);
memcpy(wifi_ssid, rcvMsg.pRcvMsgBuff, length);
status = NONE;
ESP_LOGI(TAG, "you set ssid: %s", wifi_ssid);
esp_err_t er = save_string(CMD_SSID, (char *)wifi_ssid);
if (er != ESP_OK)
ESP_LOGE(TAG, "save ssid error");
goto set_end;
} else if (status == INPUT_PASS) {
memset(wifi_pass, 0, WIFI_PASS_MAX_LEN);
memcpy(wifi_pass, rcvMsg.pRcvMsgBuff, length);
status = NONE;
ESP_LOGI(TAG, "you set password: %s", wifi_pass);
esp_err_t er = save_string(CMD_PASS, (char *)wifi_pass);
if (er != ESP_OK)
ESP_LOGE(TAG, "save pass error");
goto set_end;
} else if (status == INPUT_IP) {
memset(srv_ip, 0, SRV_IP_MAX_LEN);
memcpy(srv_ip, rcvMsg.pRcvMsgBuff, length);
status = NONE;
ESP_LOGI(TAG, "you set server ip: %s", srv_ip);
esp_err_t er = save_string(CMD_IP, (char *)srv_ip);
if (er != ESP_OK)
ESP_LOGE(TAG, "save ip error");
goto set_end;
} else if (status == INPUT_PORT) {
if (!is_valid_port((const char *)rcvMsg.pRcvMsgBuff, length)) {
rcvMsg.pWritePos = rcvMsg.pRcvMsgBuff;
ESP_LOGE(TAG, "invalid server port, please input again");
return;
}
srv_port = str2num((const char *)rcvMsg.pRcvMsgBuff, length);
status = NONE;
ESP_LOGI(TAG, "you set server port: %d", srv_port);
//esp_err_t er = save_int32(CMD_PORT, srv_port);
esp_err_t er = save_string(CMD_PORT, (char *)rcvMsg.pRcvMsgBuff);
if (er != ESP_OK)
ESP_LOGE(TAG, "save port error");
goto set_end;
}
if (strncmp((const char *)rcvMsg.pRcvMsgBuff, CMD_SSID, length) == 0) {
ESP_LOGI(TAG, "input your ssid [less than 32byte]:");
status = INPUT_SSID;
} else if (strncmp((const char *)rcvMsg.pRcvMsgBuff, CMD_PASS, length) == 0) {
ESP_LOGI(TAG, "input your password [less than 32byte]:");
status = INPUT_PASS;
} else if (strncmp((const char *)rcvMsg.pRcvMsgBuff, CMD_IP, length) == 0) {
ESP_LOGI(TAG, "input server IP:");
status = INPUT_IP;
} else if (strncmp((const char *)rcvMsg.pRcvMsgBuff, CMD_PORT, length) == 0) {
ESP_LOGI(TAG, "input server port:");
status = INPUT_PORT;
} else if (strncmp((const char *)rcvMsg.pRcvMsgBuff, CMD_HELP, length) == 0) {
show_help_info();
} else if (strncmp((const char *)rcvMsg.pRcvMsgBuff, CMD_WIFI, length) == 0) {
ESP_LOGI(TAG, "BLE scanning ......");
close_nvs();
ble_client_app_register();
//initialise_wifi();
} else if (strncmp((const char *)rcvMsg.pRcvMsgBuff, CMD_QUIT, length) == 0) {
ESP_LOGI(TAG, "reset wifi info:");
clear_storage();
close_nvs();
system_restart();
} else {
ESP_LOGI(TAG, "invalid command %s", rcvMsg.pRcvMsgBuff);
show_help_info();
}
}
set_end:
rcvMsg.pWritePos = rcvMsg.pRcvMsgBuff;
memset(rcvMsg.pRcvMsgBuff, 0, RECV_BUF_SIZE);
return;
}
*(rcvMsg.pWritePos) = data[0];
uart_write_bytes(UART_NUM_0, &data[0], 1);
rcvMsg.pWritePos += 1;
if (rcvMsg.pWritePos - rcvMsg.pRcvMsgBuff >= RECV_BUF_SIZE - 1) {
rcvMsg.pWritePos = rcvMsg.pRcvMsgBuff; // overflow, restart
ESP_LOGI(TAG, "overflow");
}
}
