void
slip_got_mac(const uint8_t * data)
{
printf("Got MAC: ");
uip_debug_lladdr_print(&uip_lladdr);
printf("\n");
memcpy(uip_lladdr.addr, data, sizeof(uip_lladdr.addr));
rimeaddr_set_node_addr((rimeaddr_t *) uip_lladdr.addr);
rimeaddr_copy((rimeaddr_t *) & wsn_mac_addr, &rimeaddr_node_addr);
mac_set = 1;
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(unicast_sender_process, ev, data)
{
static struct etimer periodic_timer;
static struct etimer send_timer;
uip_ipaddr_t global_ipaddr;
PROCESS_BEGIN();
if(node_id == 0) {
NETSTACK_RDC.off(0);
printf("Node id unset, my mac is ");
uip_debug_lladdr_print(&rimeaddr_node_addr);
printf("\n");
PROCESS_EXIT();
}
cc2420_set_txpower(RF_POWER);
cc2420_set_cca_threshold(RSSI_THR);
orpl_log_start();
printf("App: %u starting\n", node_id);
deployment_init(&global_ipaddr);
#if WITH_ORPL
orpl_init(node_id == ROOT_ID, 0);
#endif /* WITH_ORPL */
simple_udp_register(&unicast_connection, UDP_PORT,
NULL, UDP_PORT, receiver);
if(node_id == ROOT_ID) {
NETSTACK_RDC.off(1);
etimer_set(&periodic_timer, 2 * 60 * CLOCK_SECOND);
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&periodic_timer));
etimer_set(&periodic_timer, SEND_INTERVAL);
while(1) {
etimer_set(&send_timer, random_rand() % (SEND_INTERVAL));
PROCESS_WAIT_UNTIL(etimer_expired(&send_timer));
if(check_reachable_count()) {
uip_ipaddr_t dest_ipaddr;
static uint16_t target_id;
static uint16_t i;
do {
target_id = get_node_id_from_index((random_rand()>>8)%get_n_nodes());
set_ipaddr_from_id(&dest_ipaddr, target_id);
} while (target_id == ROOT_ID || !orpl_routing_set_contains(&dest_ipaddr));
app_send_to(target_id);
}
PROCESS_WAIT_UNTIL(etimer_expired(&periodic_timer));
etimer_reset(&periodic_timer);
}
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
/*
* Initalize hardware.
*/
halInit();
clock_init();
uart1_init(115200);
/* Led initialization */
leds_init();
INTERRUPTS_ON();
PRINTF("\r\nStarting ");
PRINTF(CONTIKI_VERSION_STRING);
PRINTF(" on %s\r\n", boardDescription->name);
boardPrintStringDescription();
PRINTF("\r\n");
/*
* Initialize Contiki and our processes.
*/
process_init();
#if WITH_SERIAL_LINE_INPUT
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
/* rtimer and ctimer should be initialized before radio duty cycling
layers */
rtimer_init();
/* etimer_process should be initialized before ctimer */
process_start(&etimer_process, NULL);
ctimer_init();
netstack_init();
set_rime_addr();
printf("%s %s, channel check rate %lu Hz\n",
NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()));
printf("802.15.4 PAN ID 0x%x, EUI-%d:",
IEEE802154_CONF_PANID, UIP_CONF_LL_802154?64:16);
uip_debug_lladdr_print(&linkaddr_node_addr);
printf(", radio channel %u\n", RF_CHANNEL);
procinit_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
/* Set the Clear Channel Assessment (CCA) threshold of the
radio. The CCA threshold is used both for sending packets and for
waking up ContikiMAC nodes. If the CCA threshold is too high,
ContikiMAC will not wake up from neighbor transmissions. If the
CCA threshold is too low, transmissions will be too restrictive
and no packets will be sent. DEFAULT_RADIO_CCA_THRESHOLD is
defined in this file. */
ST_RadioSetEdCcaThreshold(DEFAULT_RADIO_CCA_THRESHOLD);
autostart_start(autostart_processes);
#if UIP_CONF_IPV6
printf("Tentative link-local IPv6 address ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#endif /* UIP_CONF_IPV6 */
watchdog_start();
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
ENERGEST_OFF(ENERGEST_TYPE_CPU);
/* watchdog_stop(); */
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* Go to idle mode. */
halSleepWithOptions(SLEEPMODE_IDLE,0);
/* We are awake. */
/* watchdog_start(); */
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
/*
* Initialize hardware.
*/
halInit();
clock_init();
uart1_init(115200);
// Led initialization
leds_init();
INTERRUPTS_ON();
PRINTF("\r\nStarting ");
PRINTF(CONTIKI_VERSION_STRING);
PRINTF(" on %s\r\n",boardDescription->name);
/*
* Initialize Contiki and our processes.
*/
process_init();
#if WITH_SERIAL_LINE_INPUT
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
/* rtimer and ctimer should be initialized before radio duty cycling layers*/
rtimer_init();
/* etimer_process should be initialized before ctimer */
process_start(&etimer_process, NULL);
ctimer_init();
rtimer_init();
netstack_init();
set_rime_addr();
printf("%s %s, channel check rate %lu Hz\n",
NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()));
printf("802.15.4 PAN ID 0x%x, EUI-%d:",
IEEE802154_CONF_PANID, UIP_CONF_LL_802154?64:16);
uip_debug_lladdr_print(&rimeaddr_node_addr);
printf(", radio channel %u\n", RF_CHANNEL);
procinit_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
autostart_start(autostart_processes);
watchdog_start();
while(1){
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
ENERGEST_OFF(ENERGEST_TYPE_CPU);
//watchdog_stop();
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* Go to idle mode. */
halSleepWithOptions(SLEEPMODE_IDLE,0);
/* We are awake. */
//watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}