void uart_usb_configure_endpoints() {
usb_configure_endpoint(
VCP_INT_EP,
TYPE_INTERRUPT,
DIRECTION_IN,
SIZE_32,
ONE_BANK,
NYET_ENABLED
);
usb_configure_endpoint(
VCP_TX_EP,
TYPE_BULK,
DIRECTION_IN,
SIZE_32,
TWO_BANKS,
NYET_ENABLED
);
usb_configure_endpoint(
VCP_RX_EP,
TYPE_BULK,
DIRECTION_OUT,
SIZE_32,
TWO_BANKS,
NYET_ENABLED
);
Usb_reset_endpoint(VCP_INT_EP);
Usb_reset_endpoint(VCP_TX_EP);
Usb_reset_endpoint(VCP_RX_EP);
USB_CDC_ACM_HOOK_CONFIGURED();
}
void cdc_ecm_configure_endpoints() {
#if CDC_ECM_USES_INTERRUPT_ENDPOINT
usb_configure_endpoint(INT_EP, \
TYPE_INTERRUPT, \
DIRECTION_IN, \
SIZE_8, \
TWO_BANKS, \
NYET_ENABLED);
#endif
usb_configure_endpoint(TX_EP, \
TYPE_BULK, \
DIRECTION_IN, \
SIZE_64, \
TWO_BANKS, \
NYET_ENABLED);
usb_configure_endpoint(RX_EP, \
TYPE_BULK, \
DIRECTION_OUT, \
SIZE_64, \
TWO_BANKS, \
NYET_ENABLED);
#if CDC_ECM_USES_INTERRUPT_ENDPOINT
Usb_reset_endpoint(INT_EP);
#endif
Usb_reset_endpoint(TX_EP);
Usb_reset_endpoint(RX_EP);
usb_eth_is_active = 1;
}
//! usb_init_device.
//!
//! This function initializes the USB device controller and
//! configures the Default Control Endpoint.
//!
//!
//! @param none
//!
//! @return status
//!
U8 usb_init_device (void)
{
Usb_select_device();
if(Is_usb_id_device())
{
Usb_select_endpoint(EP_CONTROL);
if(!Is_usb_endpoint_enabled())
{
#if (USB_LOW_SPEED_DEVICE==DISABLE)
return usb_configure_endpoint(EP_CONTROL, \
TYPE_CONTROL, \
DIRECTION_OUT, \
SIZE_64, \
ONE_BANK, \
NYET_DISABLED);
#else
return usb_configure_endpoint(EP_CONTROL, \
TYPE_CONTROL, \
DIRECTION_OUT, \
SIZE_8, \
ONE_BANK, \
NYET_DISABLED);
#endif
}
}
return FALSE;
}
//! @brief This function configures the endpoints
//!
//! @param conf_nb configuration number choosed by USB host
//!
void usb_user_endpoint_init(U8 conf_nb)
{
usb_configure_endpoint(EP_MS_IN, \
TYPE_BULK, \
DIRECTION_IN, \
SIZE_64, \
TWO_BANKS, \
NYET_ENABLED);
usb_configure_endpoint(EP_MS_OUT, \
TYPE_BULK, \
DIRECTION_OUT, \
SIZE_64, \
TWO_BANKS, \
NYET_ENABLED);
}
//! @brief This function configures the endpoints
//!
//! @param conf_nb configuration number choosed by USB host
//!
void usb_user_endpoint_init(U8 conf_nb)
{
usb_configure_endpoint( EP_HID_IN, \
TYPE_INTERRUPT,\
DIRECTION_IN, \
SIZE_64, \
ONE_BANK, \
NYET_ENABLED);
usb_configure_endpoint( EP_HID_OUT, \
TYPE_INTERRUPT,\
DIRECTION_OUT, \
SIZE_64, \
ONE_BANK, \
NYET_ENABLED);
}
//! @brief This function configures the endpoints
//!
//! @param conf_nb configuration number choosed by USB host
//!
void usb_user_endpoint_init(U8 conf_nb)
{
//modify for reportlength change
usb_configure_endpoint( EP_HID_IN, \
TYPE_INTERRUPT,\
DIRECTION_IN, \
SIZE_64, \
ONE_BANK, \
NYET_ENABLED);
usb_configure_endpoint( EP_HID_OUT, \
TYPE_INTERRUPT,\
DIRECTION_OUT, \
SIZE_64, \
ONE_BANK, \
NYET_ENABLED);
}
//! usb_user_endpoint_init.
//!
//! This function configures the endpoints.
void usb_user_endpoint_init(void)
{
usb_configure_endpoint(EP_IN,
TYPE_BULK,
DIRECTION_IN,
#if EP_IN_LENGTH == 64
SIZE_64,
#elif EP_IN_LENGTH == 256
SIZE_256,
#elif EP_IN_LENGTH == 512
SIZE_512,
#else
#error Wrong EP_IN_LENGTH
#endif
ONE_BANK,
NYET_ENABLED);
usb_configure_endpoint(EP_OUT,
TYPE_BULK,
DIRECTION_OUT,
#if EP_OUT_LENGTH == 64
SIZE_64,
#elif EP_OUT_LENGTH == 256
SIZE_256,
#elif EP_OUT_LENGTH == 512
SIZE_512,
#else
#error Wrong EP_OUT_LENGTH
#endif
ONE_BANK,
NYET_ENABLED);
usb_configure_endpoint(EP_EVENT,
TYPE_BULK,
DIRECTION_IN,
SIZE_64,
TWO_BANKS,
NYET_ENABLED);
}
static void diag_configure(int configured, void *_ctxt)
{
struct diag_context *ctxt = _ctxt;
if (!ctxt)
return;
if (configured) {
if (usb_msm_get_speed() == USB_SPEED_HIGH) {
usb_configure_endpoint(ctxt->epin, &hs_bulk_in_desc);
usb_configure_endpoint(ctxt->epout, &hs_bulk_out_desc);
} else {
usb_configure_endpoint(ctxt->epin, &fs_bulk_in_desc);
usb_configure_endpoint(ctxt->epout, &fs_bulk_out_desc);
}
usb_ept_enable(ctxt->epin, 1);
usb_ept_enable(ctxt->epout, 1);
ctxt->configured = 1;
queue_work(_context.diag_wq, &(_context.usb_config_work));
} else {
/* all pending requests will be canceled */
ctxt->configured = 0;
if (ctxt->epin) {
usb_ept_fifo_flush(ctxt->epin);
usb_ept_enable(ctxt->epin, 0);
}
if (ctxt->epout) {
usb_ept_fifo_flush(ctxt->epout);
usb_ept_enable(ctxt->epout, 0);
}
if ((ctxt->operations) &&
(ctxt->operations->diag_disconnect))
ctxt->operations->diag_disconnect();
}
}
//! usb_init_device.
//!
//! This function initializes the USB device controller and
//! configures the Default Control Endpoint.
//!
//! @returns Zero is returned if the device could not be initialized. A non-zero,
//! positive number is returned if the initialization was successful.
uint8_t usb_init_device (void)
{
Usb_select_device();
if(Is_usb_id_device())
{
Usb_select_endpoint(EP_CONTROL);
if(!Is_usb_endpoint_enabled())
{
return usb_configure_endpoint(EP_CONTROL, \
TYPE_CONTROL, \
DIRECTION_OUT, \
SIZE_64, \
ONE_BANK, \
NYET_DISABLED);
}
}
return false;
}
//! usb_user_endpoint_init.
//!
//! @brief This function configures the endpoints.
//!
//! @param conf_nb Not used
void usb_user_endpoint_init(U8 conf_nb)
{
/* If we use RNDIS endpoints */
if ((usb_mode == rndis_only) || (usb_mode == rndis_debug)) {
usb_configure_endpoint(INT_EP, \
TYPE_INTERRUPT, \
DIRECTION_IN, \
SIZE_64, \
ONE_BANK, \
NYET_ENABLED);
usb_configure_endpoint(TX_EP, \
TYPE_BULK, \
DIRECTION_IN, \
SIZE_64, \
TWO_BANKS, \
NYET_ENABLED);
usb_configure_endpoint(RX_EP, \
TYPE_BULK, \
DIRECTION_OUT, \
SIZE_64, \
TWO_BANKS, \
NYET_ENABLED);
}
/* If we use virtual comm port (VCP) endpoints */
if (usb_mode == rndis_debug) {
usb_configure_endpoint(VCP_INT_EP, \
TYPE_INTERRUPT, \
DIRECTION_IN, \
SIZE_32, \
ONE_BANK, \
NYET_ENABLED);
usb_configure_endpoint(VCP_TX_EP, \
TYPE_BULK, \
DIRECTION_IN, \
SIZE_32, \
TWO_BANKS, \
NYET_ENABLED);
usb_configure_endpoint(VCP_RX_EP, \
TYPE_BULK, \
DIRECTION_OUT, \
SIZE_32, \
TWO_BANKS, \
NYET_ENABLED);
}
/* If we use mass storage endpoints */
if (usb_mode == mass_storage) {
usb_configure_endpoint(MS_IN_EP, \
TYPE_BULK, \
DIRECTION_IN, \
SIZE_64, \
ONE_BANK, \
NYET_ENABLED);
usb_configure_endpoint(MS_OUT_EP, \
TYPE_BULK, \
DIRECTION_OUT, \
SIZE_64, \
ONE_BANK, \
NYET_ENABLED);
}
if ((usb_mode == rndis_only) || (usb_mode == rndis_debug)) {
Usb_reset_endpoint(INT_EP);
Usb_reset_endpoint(TX_EP);
Usb_reset_endpoint(RX_EP);
}
if (usb_mode == rndis_debug){
Usb_reset_endpoint(VCP_INT_EP);
Usb_reset_endpoint(VCP_TX_EP);
Usb_reset_endpoint(VCP_RX_EP);
}
if (usb_mode == mass_storage) {
Usb_reset_endpoint(VCP_TX_EP);
Usb_reset_endpoint(VCP_RX_EP);
}
}