/*
* Attach the interface. Allocate softc structures, do
* setup and ethernet/BPF attach.
*/
void
kue_attach(struct device *parent, struct device *self, void *aux)
{
struct kue_softc *sc = (struct kue_softc *)self;
struct usb_attach_arg *uaa = aux;
usbd_device_handle dev = uaa->device;
usbd_status err;
DPRINTFN(5,(" : kue_attach: sc=%p, dev=%p", sc, dev));
err = usbd_set_config_no(dev, KUE_CONFIG_NO, 1);
if (err) {
printf("%s: setting config no failed\n",
sc->kue_dev.dv_xname);
return;
}
sc->kue_udev = dev;
sc->kue_product = uaa->product;
sc->kue_vendor = uaa->vendor;
if (rootvp == NULL)
mountroothook_establish(kue_attachhook, sc);
else
kue_attachhook(sc);
}
void
urio_attach(struct device *parent, struct device *self, void *aux)
{
struct urio_softc *sc = (struct urio_softc *)self;
struct usb_attach_arg *uaa = aux;
struct usbd_device *dev = uaa->device;
struct usbd_interface *iface;
usbd_status err;
usb_endpoint_descriptor_t *ed;
u_int8_t epcount;
int i;
DPRINTFN(10,("urio_attach: sc=%p\n", sc));
err = usbd_set_config_no(dev, URIO_CONFIG_NO, 1);
if (err) {
printf("%s: setting config no failed\n",
sc->sc_dev.dv_xname);
return;
}
err = usbd_device2interface_handle(dev, URIO_IFACE_IDX, &iface);
if (err) {
printf("%s: getting interface handle failed\n",
sc->sc_dev.dv_xname);
return;
}
sc->sc_udev = dev;
sc->sc_iface = iface;
epcount = 0;
(void)usbd_endpoint_count(iface, &epcount);
sc->sc_in_addr = -1;
sc->sc_out_addr = -1;
for (i = 0; i < epcount; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
printf("%s: couldn't get ep %d\n",
sc->sc_dev.dv_xname, i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_in_addr = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_out_addr = ed->bEndpointAddress;
}
}
if (sc->sc_in_addr == -1 || sc->sc_out_addr == -1) {
printf("%s: missing endpoint\n", sc->sc_dev.dv_xname);
return;
}
DPRINTFN(10, ("urio_attach: %p\n", sc->sc_udev));
}
/*
* Issue a SET_CONFIGURATION command to reset the MAC. This should be
* done after the firmware is loaded into the adapter in order to
* bring it into proper operation.
*/
void
kue_reset(struct kue_softc *sc)
{
DPRINTFN(5,("%s: %s: enter\n", sc->kue_dev.dv_xname, __func__));
if (usbd_set_config_no(sc->kue_udev, KUE_CONFIG_NO, 1) ||
usbd_device2interface_handle(sc->kue_udev, KUE_IFACE_IDX,
&sc->kue_iface))
printf("%s: reset failed\n", sc->kue_dev.dv_xname);
/* Wait a little while for the chip to get its brains in order. */
usbd_delay_ms(sc->kue_udev, 10);
}
/*
* Expose both the USB mass storage interface and the database access one
*/
static void
uberry_dual_mode(struct uberry_softc *sc)
{
char dummy[2];
usbd_status err;
uberry_cmd(sc, UT_READ | UT_VENDOR, 0xa9, 1, 1, dummy, 2);
err = usbd_set_config_no(sc->sc_udev, UBERRY_CONFIG_NO, 1);
if (err) {
aprint_error_dev(sc->sc_dev, "setting config no failed\n");
return;
}
}
static void
uberry_charge(struct uberry_softc *sc)
{
char dummy[2];
usbd_status err;
if (sc->sc_udev->power != USB_MAX_POWER) {
uberry_cmd(sc, UT_READ | UT_VENDOR, 0xa5, 0, 1, dummy, 2);
uberry_cmd(sc, UT_WRITE | UT_VENDOR, 0xa2, 0, 1, dummy, 0);
}
err = usbd_set_config_no(sc->sc_udev, UBERRY_CONFIG_NO, 1);
if (err) {
aprint_error_dev(sc->sc_dev, "setting config no failed\n");
return;
}
}
void
smsc_attach(struct device *parent, struct device *self, void *aux)
{
struct smsc_softc *sc = (struct smsc_softc *)self;
struct usb_attach_arg *uaa = aux;
struct usbd_device *dev = uaa->device;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
struct mii_data *mii;
struct ifnet *ifp;
int err, s, i;
uint32_t mac_h, mac_l;
sc->sc_udev = dev;
err = usbd_set_config_no(dev, SMSC_CONFIG_INDEX, 1);
/* Setup the endpoints for the SMSC LAN95xx device(s) */
usb_init_task(&sc->sc_tick_task, smsc_tick_task, sc,
USB_TASK_TYPE_GENERIC);
rw_init(&sc->sc_mii_lock, "smscmii");
usb_init_task(&sc->sc_stop_task, (void (*)(void *))smsc_stop, sc,
USB_TASK_TYPE_GENERIC);
err = usbd_device2interface_handle(dev, SMSC_IFACE_IDX, &sc->sc_iface);
if (err) {
printf("%s: getting interface handle failed\n",
sc->sc_dev.dv_xname);
return;
}
id = usbd_get_interface_descriptor(sc->sc_iface);
if (sc->sc_udev->speed >= USB_SPEED_HIGH)
sc->sc_bufsz = SMSC_MAX_BUFSZ;
else
sc->sc_bufsz = SMSC_MIN_BUFSZ;
/* Find endpoints. */
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (!ed) {
printf("%s: couldn't get ep %d\n",
sc->sc_dev.dv_xname, i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_ed[SMSC_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_ed[SMSC_ENDPT_TX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->sc_ed[SMSC_ENDPT_INTR] = ed->bEndpointAddress;
}
}
s = splnet();
ifp = &sc->sc_ac.ac_if;
ifp->if_softc = sc;
strlcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ);
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = smsc_ioctl;
ifp->if_start = smsc_start;
ifp->if_capabilities = IFCAP_VLAN_MTU;
/* Setup some of the basics */
sc->sc_phyno = 1;
/*
* Attempt to get the mac address, if an EEPROM is not attached this
* will just return FF:FF:FF:FF:FF:FF, so in such cases we invent a MAC
* address based on urandom.
*/
memset(sc->sc_ac.ac_enaddr, 0xff, ETHER_ADDR_LEN);
/* Check if there is already a MAC address in the register */
if ((smsc_read_reg(sc, SMSC_MAC_ADDRL, &mac_l) == 0) &&
(smsc_read_reg(sc, SMSC_MAC_ADDRH, &mac_h) == 0)) {
sc->sc_ac.ac_enaddr[5] = (uint8_t)((mac_h >> 8) & 0xff);
sc->sc_ac.ac_enaddr[4] = (uint8_t)((mac_h) & 0xff);
sc->sc_ac.ac_enaddr[3] = (uint8_t)((mac_l >> 24) & 0xff);
sc->sc_ac.ac_enaddr[2] = (uint8_t)((mac_l >> 16) & 0xff);
sc->sc_ac.ac_enaddr[1] = (uint8_t)((mac_l >> 8) & 0xff);
sc->sc_ac.ac_enaddr[0] = (uint8_t)((mac_l) & 0xff);
}
/*
* Attach the interface. Allocate softc structures, do ifmedia
* setup and ethernet/BPF attach.
*/
void
wi_usb_attach(struct device *parent, struct device *self, void *aux)
{
struct wi_usb_softc *sc = (struct wi_usb_softc *)self;
struct usb_attach_arg *uaa = aux;
/* int s; */
struct usbd_device *dev = uaa->device;
struct usbd_interface *iface;
usbd_status err;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
int i;
DPRINTFN(5,(" : wi_usb_attach: sc=%p", sc));
err = usbd_set_config_no(dev, WI_USB_CONFIG_NO, 1);
if (err) {
printf("%s: setting config no failed\n", sc->wi_usb_dev.dv_xname);
return;
}
/* XXX - any tasks? */
err = usbd_device2interface_handle(dev, WI_USB_IFACE_IDX, &iface);
if (err) {
printf("%s: getting interface handle failed\n",
sc->wi_usb_dev.dv_xname);
return;
}
/* XXX - flags? */
sc->wi_usb_udev = dev;
sc->wi_usb_iface = iface;
sc->wi_usb_product = uaa->product;
sc->wi_usb_vendor = uaa->vendor;
sc->sc_wi.wi_usb_cdata = sc;
sc->sc_wi.wi_flags |= WI_FLAGS_BUS_USB;
sc->wi_lock = 0;
sc->wi_lockwait = 0;
sc->wi_resetonce = 0;
id = usbd_get_interface_descriptor(iface);
/* Find endpoints. */
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
printf("%s: couldn't get endpoint descriptor %d\n",
sc->wi_usb_dev.dv_xname, i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->wi_usb_ed[WI_USB_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->wi_usb_ed[WI_USB_ENDPT_TX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->wi_usb_ed[WI_USB_ENDPT_INTR] = ed->bEndpointAddress;
}
}
sc->wi_usb_nummem = 0;
/* attach wi device */
if (wi_usb_rx_list_init(sc)) {
printf("%s: rx list init failed\n",
sc->wi_usb_dev.dv_xname);
return;
}
if (wi_usb_tx_list_init(sc)) {
printf("%s: tx list init failed\n",
sc->wi_usb_dev.dv_xname);
return;
}
if (wi_usb_open_pipes(sc)){
printf("%s: open pipes failed\n",
sc->wi_usb_dev.dv_xname);
return;
}
sc->wi_usb_attached = 1;
kthread_create_deferred(wi_usb_start_thread, sc);
}
void
smsc_attach(device_t parent, device_t self, void *aux)
{
struct smsc_softc *sc = device_private(self);
struct usb_attach_arg *uaa = aux;
usbd_device_handle dev = uaa->device;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
char *devinfop;
struct mii_data *mii;
struct ifnet *ifp;
int err, s, i;
uint32_t mac_h, mac_l;
sc->sc_dev = self;
sc->sc_udev = dev;
aprint_naive("\n");
aprint_normal("\n");
devinfop = usbd_devinfo_alloc(sc->sc_udev, 0);
aprint_normal_dev(self, "%s\n", devinfop);
usbd_devinfo_free(devinfop);
err = usbd_set_config_no(dev, SMSC_CONFIG_INDEX, 1);
if (err) {
aprint_error_dev(self, "failed to set configuration"
", err=%s\n", usbd_errstr(err));
return;
}
/* Setup the endpoints for the SMSC LAN95xx device(s) */
usb_init_task(&sc->sc_tick_task, smsc_tick_task, sc, 0);
usb_init_task(&sc->sc_stop_task, (void (*)(void *))smsc_stop, sc, 0);
mutex_init(&sc->sc_mii_lock, MUTEX_DEFAULT, IPL_NONE);
err = usbd_device2interface_handle(dev, SMSC_IFACE_IDX, &sc->sc_iface);
if (err) {
aprint_error_dev(self, "getting interface handle failed\n");
return;
}
id = usbd_get_interface_descriptor(sc->sc_iface);
if (sc->sc_udev->speed >= USB_SPEED_HIGH)
sc->sc_bufsz = SMSC_MAX_BUFSZ;
else
sc->sc_bufsz = SMSC_MIN_BUFSZ;
/* Find endpoints. */
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (!ed) {
aprint_error_dev(self, "couldn't get ep %d\n", i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_ed[SMSC_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_ed[SMSC_ENDPT_TX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->sc_ed[SMSC_ENDPT_INTR] = ed->bEndpointAddress;
}
}
s = splnet();
ifp = &sc->sc_ec.ec_if;
ifp->if_softc = sc;
strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ);
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_init = smsc_init;
ifp->if_ioctl = smsc_ioctl;
ifp->if_start = smsc_start;
ifp->if_stop = smsc_stop;
#ifdef notyet
/*
* We can do TCPv4, and UDPv4 checksums in hardware.
*/
ifp->if_capabilities |=
/*IFCAP_CSUM_TCPv4_Tx |*/ IFCAP_CSUM_TCPv4_Rx |
/*IFCAP_CSUM_UDPv4_Tx |*/ IFCAP_CSUM_UDPv4_Rx;
#endif
sc->sc_ec.ec_capabilities = ETHERCAP_VLAN_MTU;
/* Setup some of the basics */
sc->sc_phyno = 1;
/*
* Attempt to get the mac address, if an EEPROM is not attached this
* will just return FF:FF:FF:FF:FF:FF, so in such cases we invent a MAC
* address based on urandom.
*/
memset(sc->sc_enaddr, 0xff, ETHER_ADDR_LEN);
prop_dictionary_t dict = device_properties(self);
prop_data_t eaprop = prop_dictionary_get(dict, "mac-address");
if (eaprop != NULL) {
KASSERT(prop_object_type(eaprop) == PROP_TYPE_DATA);
KASSERT(prop_data_size(eaprop) == ETHER_ADDR_LEN);
memcpy(sc->sc_enaddr, prop_data_data_nocopy(eaprop),
ETHER_ADDR_LEN);
} else
/* Check if there is already a MAC address in the register */
if ((smsc_read_reg(sc, SMSC_MAC_ADDRL, &mac_l) == 0) &&
(smsc_read_reg(sc, SMSC_MAC_ADDRH, &mac_h) == 0)) {
sc->sc_enaddr[5] = (uint8_t)((mac_h >> 8) & 0xff);
sc->sc_enaddr[4] = (uint8_t)((mac_h) & 0xff);
sc->sc_enaddr[3] = (uint8_t)((mac_l >> 24) & 0xff);
sc->sc_enaddr[2] = (uint8_t)((mac_l >> 16) & 0xff);
sc->sc_enaddr[1] = (uint8_t)((mac_l >> 8) & 0xff);
sc->sc_enaddr[0] = (uint8_t)((mac_l) & 0xff);
}
void
uipaq_attach(device_t parent, device_t self, void *aux)
{
struct uipaq_softc *sc = device_private(self);
struct usb_attach_arg *uaa = aux;
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
char *devinfop;
const char *devname = device_xname(self);
int i;
usbd_status err;
struct ucom_attach_args uca;
DPRINTFN(10,("\nuipaq_attach: sc=%p\n", sc));
sc->sc_dev = self;
aprint_naive("\n");
aprint_normal("\n");
devinfop = usbd_devinfo_alloc(dev, 0);
aprint_normal_dev(self, "%s\n", devinfop);
usbd_devinfo_free(devinfop);
/* Move the device into the configured state. */
err = usbd_set_config_no(dev, UIPAQ_CONFIG_NO, 1);
if (err) {
aprint_error_dev(self, "failed to set configuration"
", err=%s\n", usbd_errstr(err));
goto bad;
}
err = usbd_device2interface_handle(dev, UIPAQ_IFACE_INDEX, &iface);
if (err) {
aprint_error("\n%s: failed to get interface, err=%s\n",
devname, usbd_errstr(err));
goto bad;
}
sc->sc_flags = uipaq_lookup(uaa->vendor, uaa->product)->uv_flags;
id = usbd_get_interface_descriptor(iface);
sc->sc_udev = dev;
sc->sc_iface = iface;
uca.ibufsize = UIPAQIBUFSIZE;
uca.obufsize = UIPAQOBUFSIZE;
uca.ibufsizepad = UIPAQIBUFSIZE;
uca.opkthdrlen = 0;
uca.device = dev;
uca.iface = iface;
uca.methods = &uipaq_methods;
uca.arg = sc;
uca.portno = UCOM_UNK_PORTNO;
uca.info = "Generic";
/* err = uipaq_init(sc);
if (err) {
printf("%s: init failed, %s\n", device_xname(sc->sc_dev),
usbd_errstr(err));
goto bad;
}*/
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
sc->sc_dev);
uca.bulkin = uca.bulkout = -1;
for (i=0; i<id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
aprint_error_dev(self,
"no endpoint descriptor for %d\n", i);
goto bad;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
(ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
uca.bulkin = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
(ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
uca.bulkout = ed->bEndpointAddress;
}
}
if (uca.bulkin == -1 || uca.bulkout == -1) {
aprint_error_dev(self, "no proper endpoints found (%d,%d) \n",
uca.bulkin, uca.bulkout);
return;
}
sc->sc_subdev = config_found_sm_loc(self, "ucombus", NULL, &uca,
ucomprint, ucomsubmatch);
return;
bad:
DPRINTF(("uipaq_attach: ATTACH ERROR\n"));
sc->sc_dying = 1;
return;
}
void
urio_attach(device_t parent, device_t self, void *aux)
{
struct urio_softc *sc = device_private(self);
struct usb_attach_arg *uaa = aux;
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
char *devinfop;
usbd_status err;
usb_endpoint_descriptor_t *ed;
u_int8_t epcount;
int i;
DPRINTFN(10,("urio_attach: sc=%p\n", sc));
sc->sc_dev = self;
aprint_naive("\n");
aprint_normal("\n");
devinfop = usbd_devinfo_alloc(dev, 0);
aprint_normal_dev(self, "%s\n", devinfop);
usbd_devinfo_free(devinfop);
err = usbd_set_config_no(dev, URIO_CONFIG_NO, 1);
if (err) {
aprint_error_dev(self, "failed to set configuration"
", err=%s\n", usbd_errstr(err));
return;
}
err = usbd_device2interface_handle(dev, URIO_IFACE_IDX, &iface);
if (err) {
aprint_error_dev(self, "getting interface handle failed\n");
return;
}
sc->sc_udev = dev;
sc->sc_iface = iface;
epcount = 0;
(void)usbd_endpoint_count(iface, &epcount);
sc->sc_in_addr = -1;
sc->sc_out_addr = -1;
for (i = 0; i < epcount; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
aprint_error_dev(self, "couldn't get ep %d\n", i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_in_addr = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_out_addr = ed->bEndpointAddress;
}
}
if (sc->sc_in_addr == -1 || sc->sc_out_addr == -1) {
aprint_error_dev(self, "missing endpoint\n");
return;
}
DPRINTFN(10, ("urio_attach: %p\n", sc->sc_udev));
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
sc->sc_dev);
return;
}
/* Attach */
void
url_attach(device_t parent, device_t self, void *aux)
{
struct url_softc *sc = device_private(self);
struct usb_attach_arg *uaa = aux;
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
usbd_status err;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
char *devinfop;
struct ifnet *ifp;
struct mii_data *mii;
u_char eaddr[ETHER_ADDR_LEN];
int i, s;
sc->sc_dev = self;
aprint_naive("\n");
aprint_normal("\n");
devinfop = usbd_devinfo_alloc(dev, 0);
aprint_normal_dev(self, "%s\n", devinfop);
usbd_devinfo_free(devinfop);
/* Move the device into the configured state. */
err = usbd_set_config_no(dev, URL_CONFIG_NO, 1);
if (err) {
aprint_error_dev(self, "failed to set configuration"
", err=%s\n", usbd_errstr(err));
goto bad;
}
usb_init_task(&sc->sc_tick_task, url_tick_task, sc, 0);
rw_init(&sc->sc_mii_rwlock);
usb_init_task(&sc->sc_stop_task, (void (*)(void *))url_stop_task, sc, 0);
/* get control interface */
err = usbd_device2interface_handle(dev, URL_IFACE_INDEX, &iface);
if (err) {
aprint_error_dev(self, "failed to get interface, err=%s\n",
usbd_errstr(err));
goto bad;
}
sc->sc_udev = dev;
sc->sc_ctl_iface = iface;
sc->sc_flags = url_lookup(uaa->vendor, uaa->product)->url_flags;
/* get interface descriptor */
id = usbd_get_interface_descriptor(sc->sc_ctl_iface);
/* find endpoints */
sc->sc_bulkin_no = sc->sc_bulkout_no = sc->sc_intrin_no = -1;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_ctl_iface, i);
if (ed == NULL) {
aprint_error_dev(self,
"couldn't get endpoint %d\n", i);
goto bad;
}
if ((ed->bmAttributes & UE_XFERTYPE) == UE_BULK &&
UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN)
sc->sc_bulkin_no = ed->bEndpointAddress; /* RX */
else if ((ed->bmAttributes & UE_XFERTYPE) == UE_BULK &&
UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT)
sc->sc_bulkout_no = ed->bEndpointAddress; /* TX */
else if ((ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT &&
UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN)
sc->sc_intrin_no = ed->bEndpointAddress; /* Status */
}
if (sc->sc_bulkin_no == -1 || sc->sc_bulkout_no == -1 ||
sc->sc_intrin_no == -1) {
aprint_error_dev(self, "missing endpoint\n");
goto bad;
}
s = splnet();
/* reset the adapter */
url_reset(sc);
/* Get Ethernet Address */
err = url_mem(sc, URL_CMD_READMEM, URL_IDR0, (void *)eaddr,
ETHER_ADDR_LEN);
if (err) {
aprint_error_dev(self, "read MAC address failed\n");
splx(s);
goto bad;
}
/* Print Ethernet Address */
aprint_normal_dev(self, "Ethernet address %s\n", ether_sprintf(eaddr));
/* initialize interface information */
ifp = GET_IFP(sc);
ifp->if_softc = sc;
ifp->if_mtu = ETHERMTU;
strncpy(ifp->if_xname, device_xname(self), IFNAMSIZ);
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_start = url_start;
ifp->if_ioctl = url_ioctl;
ifp->if_watchdog = url_watchdog;
ifp->if_init = url_init;
ifp->if_stop = url_stop;
IFQ_SET_READY(&ifp->if_snd);
/*
* Do ifmedia setup.
*/
mii = &sc->sc_mii;
mii->mii_ifp = ifp;
mii->mii_readreg = url_int_miibus_readreg;
mii->mii_writereg = url_int_miibus_writereg;
#if 0
if (sc->sc_flags & URL_EXT_PHY) {
mii->mii_readreg = url_ext_miibus_readreg;
mii->mii_writereg = url_ext_miibus_writereg;
}
#endif
mii->mii_statchg = url_miibus_statchg;
mii->mii_flags = MIIF_AUTOTSLEEP;
sc->sc_ec.ec_mii = mii;
ifmedia_init(&mii->mii_media, 0,
url_ifmedia_change, url_ifmedia_status);
mii_attach(self, mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0);
if (LIST_FIRST(&mii->mii_phys) == NULL) {
ifmedia_add(&mii->mii_media, IFM_ETHER | IFM_NONE, 0, NULL);
ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_NONE);
} else
ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_AUTO);
/* attach the interface */
if_attach(ifp);
ether_ifattach(ifp, eaddr);
rnd_attach_source(&sc->rnd_source, device_xname(self),
RND_TYPE_NET, 0);
callout_init(&sc->sc_stat_ch, 0);
sc->sc_attached = 1;
splx(s);
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, dev, sc->sc_dev);
return;
bad:
sc->sc_dying = 1;
return;
}
int
ugen_set_config(struct ugen_softc *sc, int configno)
{
struct usbd_device *dev = sc->sc_udev;
usb_config_descriptor_t *cdesc;
struct usbd_interface *iface;
usb_endpoint_descriptor_t *ed;
struct ugen_endpoint *sce;
u_int8_t niface, nendpt;
int ifaceno, endptno, endpt;
int err;
int dir;
DPRINTFN(1,("ugen_set_config: %s to configno %d, sc=%p\n",
sc->sc_dev.dv_xname, configno, sc));
/*
* We start at 1, not 0, because we don't care whether the
* control endpoint is open or not. It is always present.
*/
for (endptno = 1; endptno < USB_MAX_ENDPOINTS; endptno++)
if (sc->sc_is_open[endptno]) {
DPRINTFN(1,
("ugen_set_config: %s - endpoint %d is open\n",
sc->sc_dev.dv_xname, endptno));
return (USBD_IN_USE);
}
/* Avoid setting the current value. */
cdesc = usbd_get_config_descriptor(dev);
if (!cdesc || cdesc->bConfigurationValue != configno) {
if (sc->sc_secondary) {
printf("%s: secondary, not changing config to %d\n",
__func__, configno);
return (USBD_IN_USE);
} else {
err = usbd_set_config_no(dev, configno, 1);
if (err)
return (err);
}
}
err = usbd_interface_count(dev, &niface);
if (err)
return (err);
memset(sc->sc_endpoints, 0, sizeof sc->sc_endpoints);
for (ifaceno = 0; ifaceno < niface; ifaceno++) {
DPRINTFN(1,("ugen_set_config: ifaceno %d\n", ifaceno));
if (usbd_iface_claimed(sc->sc_udev, ifaceno)) {
DPRINTF(("%s: iface %d not available\n", __func__,
ifaceno));
continue;
}
err = usbd_device2interface_handle(dev, ifaceno, &iface);
if (err)
return (err);
err = usbd_endpoint_count(iface, &nendpt);
if (err)
return (err);
for (endptno = 0; endptno < nendpt; endptno++) {
ed = usbd_interface2endpoint_descriptor(iface,endptno);
endpt = ed->bEndpointAddress;
dir = UE_GET_DIR(endpt) == UE_DIR_IN ? IN : OUT;
sce = &sc->sc_endpoints[UE_GET_ADDR(endpt)][dir];
DPRINTFN(1,("ugen_set_config: endptno %d, endpt=0x%02x"
"(%d,%d), sce=%p\n",
endptno, endpt, UE_GET_ADDR(endpt),
UE_GET_DIR(endpt), sce));
sce->sc = sc;
sce->edesc = ed;
sce->iface = iface;
}
}
return (0);
}
void
ugl_attach(struct device *parent, struct device *self, void *aux)
{
struct ugl_softc *sc = (struct ugl_softc *)self;
struct usb_attach_arg *uaa = aux;
int s;
struct usbd_device *dev = uaa->device;
struct usbd_interface *iface;
usbd_status err;
struct ifnet *ifp;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
int i;
u_int16_t macaddr_hi;
DPRINTFN(5,(" : ugl_attach: sc=%p, dev=%p", sc, dev));
err = usbd_set_config_no(dev, UGL_CONFIG_NO, 1);
if (err) {
printf("%s: setting config no failed\n",
sc->sc_dev.dv_xname);
return;
}
sc->sc_udev = dev;
err = usbd_device2interface_handle(dev, UGL_IFACE_IDX, &iface);
if (err) {
printf("%s: getting interface handle failed\n",
sc->sc_dev.dv_xname);
return;
}
sc->sc_iface = iface;
id = usbd_get_interface_descriptor(iface);
/* Find endpoints. */
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
printf("%s: couldn't get ep %d\n",
sc->sc_dev.dv_xname, i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_ed[UGL_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_ed[UGL_ENDPT_TX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->sc_ed[UGL_ENDPT_INTR] = ed->bEndpointAddress;
}
}
if (sc->sc_ed[UGL_ENDPT_RX] == 0 || sc->sc_ed[UGL_ENDPT_TX] == 0 ||
sc->sc_ed[UGL_ENDPT_INTR] == 0) {
printf("%s: missing endpoint\n", sc->sc_dev.dv_xname);
return;
}
s = splnet();
macaddr_hi = htons(0x2acb);
bcopy(&macaddr_hi, &sc->sc_arpcom.ac_enaddr[0], sizeof(u_int16_t));
bcopy(&ticks, &sc->sc_arpcom.ac_enaddr[2], sizeof(u_int32_t));
sc->sc_arpcom.ac_enaddr[5] = (u_int8_t)(sc->sc_dev.dv_unit);
printf("%s: address %s\n",
sc->sc_dev.dv_xname, ether_sprintf(sc->sc_arpcom.ac_enaddr));
/* Initialize interface info.*/
ifp = GET_IFP(sc);
ifp->if_softc = sc;
ifp->if_hardmtu = UGL_MAX_MTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = ugl_ioctl;
ifp->if_start = ugl_start;
ifp->if_watchdog = ugl_watchdog;
strlcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ);
IFQ_SET_READY(&ifp->if_snd);
/* Attach the interface. */
if_attach(ifp);
ether_ifattach(ifp);
splx(s);
}
void
ueagle_attach(struct device *parent, struct device *self, void *aux)
{
struct ueagle_softc *sc = (struct ueagle_softc *)self;
struct usb_attach_arg *uaa = aux;
struct ifnet *ifp = &sc->sc_if;
uint8_t addr[ETHER_ADDR_LEN];
sc->sc_udev = uaa->device;
/*
* Pre-firmware modems must be flashed and reset first. They will
* automatically detach themselves from the bus and reattach later
* with a new product Id.
*/
sc->fw = ueagle_lookup(uaa->vendor, uaa->product)->fw;
if (sc->fw != NULL) {
if (rootvp == NULL)
mountroothook_establish(ueagle_attachhook, sc);
else
ueagle_attachhook(sc);
/* processing of pre-firmware modems ends here */
return;
}
if (usbd_set_config_no(sc->sc_udev, UEAGLE_CONFIG_NO, 0) != 0) {
printf("%s: could not set configuration no\n",
sc->sc_dev.dv_xname);
return;
}
if (ueagle_getesi(sc, addr) != 0) {
printf("%s: could not read end system identifier\n",
sc->sc_dev.dv_xname);
return;
}
printf("%s: address: %02x:%02x:%02x:%02x:%02x:%02x\n",
sc->sc_dev.dv_xname, addr[0], addr[1], addr[2], addr[3],
addr[4], addr[5]);
usb_init_task(&sc->sc_swap_task, ueagle_loadpage, sc,
USB_TASK_TYPE_GENERIC);
ifp->if_softc = sc;
ifp->if_flags = IFF_SIMPLEX;
ifp->if_ioctl = ueagle_ioctl;
ifp->if_start = ueagle_start;
IFQ_SET_READY(&ifp->if_snd);
memcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ);
if_attach(ifp);
atm_ifattach(ifp);
/* override default MTU value (9180 is too large for us) */
ifp->if_mtu = UEAGLE_IFMTU;
#if NBPFILTER > 0
bpfattach(&ifp->if_bpf, ifp, DLT_RAW, 0);
#endif
}
/*
* Attach the interface.
*/
static int
lgue_attach(device_t dev)
{
struct lgue_softc *sc;
struct usb_attach_arg *uaa;
struct ifnet *ifp;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
int i;
u_char eaddr[ETHER_ADDR_LEN];
usbd_status err;
sc = device_get_softc(dev);
uaa = device_get_ivars(dev);
sc->lgue_ctl_iface = uaa->iface;
sc->lgue_udev = uaa->device;
/* It has only config but in case... */
if (usbd_set_config_no(sc->lgue_udev, LGUE_CONFIG_NO, 0)) {
device_printf(dev, "setting config no %d failed\n",
LGUE_CONFIG_NO);
return(ENXIO);
}
/* Get control and data intefaces */
id = usbd_get_interface_descriptor(uaa->iface);
sc->lgue_ctl_iface_no = id->bInterfaceNumber;
sc->lgue_data_iface_no = lgue_get_data_iface_no(sc->lgue_udev, id);
if (sc->lgue_data_iface_no == -1) {
device_printf(dev, "no data interface number\n");
goto bad;
}
/* Claim data interface */
for (i = 0; i < uaa->nifaces; ++i) {
if (uaa->ifaces[i] != NULL) {
id = usbd_get_interface_descriptor(uaa->ifaces[i]);
if (id != NULL &&
id->bInterfaceNumber == sc->lgue_data_iface_no) {
err = usbd_set_interface(uaa->ifaces[i],
LGUE_ALTERNATE_SETTING);
if ( err != USBD_NORMAL_COMPLETION) {
device_printf(dev,
"no alternate data interface. err:%s\n",
usbd_errstr(err));
goto bad;
}
sc->lgue_data_iface = uaa->ifaces[i];
uaa->ifaces[i] = NULL;
}
}
}
if (sc->lgue_data_iface == NULL) {
device_printf(dev, "no data interface\n");
goto bad;
}
/* Find data interface endpoints */
id = usbd_get_interface_descriptor(sc->lgue_data_iface);
sc->lgue_ed[LGUE_ENDPT_RX] = sc->lgue_ed[LGUE_ENDPT_TX] = -1;
for (i = 0; i < id->bNumEndpoints; ++i) {
ed = usbd_interface2endpoint_descriptor(sc->lgue_data_iface, i);
if (!ed) {
device_printf(dev,
"couldn't get endpoint descriptor %d\n", i);
goto bad;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->lgue_ed[LGUE_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->lgue_ed[LGUE_ENDPT_TX] = ed->bEndpointAddress;
}
}
if (sc->lgue_ed[LGUE_ENDPT_RX] == -1) {
device_printf(dev, "couldn't find data bilk in\n");
goto bad;
}
if (sc->lgue_ed[LGUE_ENDPT_TX] == -1) {
device_printf(dev, "couldn't find data bilk out\n");
goto bad;
}
/* Find control interface endpoint */
id = usbd_get_interface_descriptor(sc->lgue_ctl_iface);
sc->lgue_ed[LGUE_ENDPT_INTR] = -1;
for (i = 0; i < id->bNumEndpoints; ++i) {
ed = usbd_interface2endpoint_descriptor(sc->lgue_ctl_iface, i);
if (!ed) {
device_printf(dev,
"couldn't get endpoint descriptor %d\n", i);
goto bad;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->lgue_ed[LGUE_ENDPT_INTR] = ed->bEndpointAddress;
}
}
if (sc->lgue_ed[LGUE_ENDPT_INTR] == -1) {
device_printf(dev, "couldn't find interrupt bilk in\n");
goto bad;
}
/* Create interface */
ifp = &sc->lgue_arpcom.ac_if;
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
lgue_getmac(sc, eaddr);
ifp->if_mtu = lgue_getmtu(sc);
ifp->if_data.ifi_mtu = ifp->if_mtu;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_baudrate = 10000000;
ifp->if_ioctl = lgue_ioctl;
ifp->if_start = lgue_start;
ifp->if_watchdog = lgue_watchdog;
ifp->if_init = lgue_init;
ifq_set_maxlen(&ifp->if_snd, IFQ_MAXLEN);
ifq_set_ready(&ifp->if_snd);
/* Call attach routine */
ether_ifattach(ifp, eaddr, NULL);
usb_register_netisr();
sc->lgue_dying = 0;
return(0);
bad:
return(ENXIO);
}
/*
* Attach the interface. Allocate softc structures, do
* setup and ethernet/BPF attach.
*/
void
kue_attach(device_t parent, device_t self, void *aux)
{
struct kue_softc *sc = device_private(self);
struct usb_attach_arg *uaa = aux;
char *devinfop;
int s;
struct ifnet *ifp;
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
usbd_status err;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
int i;
DPRINTFN(5,(" : kue_attach: sc=%p, dev=%p", sc, dev));
sc->kue_dev = self;
aprint_naive("\n");
aprint_normal("\n");
devinfop = usbd_devinfo_alloc(dev, 0);
aprint_normal_dev(self, "%s\n", devinfop);
usbd_devinfo_free(devinfop);
err = usbd_set_config_no(dev, KUE_CONFIG_NO, 1);
if (err) {
aprint_error_dev(self, "failed to set configuration"
", err=%s\n", usbd_errstr(err));
return;
}
sc->kue_udev = dev;
sc->kue_product = uaa->product;
sc->kue_vendor = uaa->vendor;
/* Load the firmware into the NIC. */
if (kue_load_fw(sc)) {
aprint_error_dev(self, "loading firmware failed\n");
return;
}
err = usbd_device2interface_handle(dev, KUE_IFACE_IDX, &iface);
if (err) {
aprint_error_dev(self, "getting interface handle failed\n");
return;
}
sc->kue_iface = iface;
id = usbd_get_interface_descriptor(iface);
/* Find endpoints. */
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
aprint_error_dev(self, "couldn't get ep %d\n", i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->kue_ed[KUE_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->kue_ed[KUE_ENDPT_TX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->kue_ed[KUE_ENDPT_INTR] = ed->bEndpointAddress;
}
}
if (sc->kue_ed[KUE_ENDPT_RX] == 0 || sc->kue_ed[KUE_ENDPT_TX] == 0) {
aprint_error_dev(self, "missing endpoint\n");
return;
}
/* Read ethernet descriptor */
err = kue_ctl(sc, KUE_CTL_READ, KUE_CMD_GET_ETHER_DESCRIPTOR,
0, &sc->kue_desc, sizeof(sc->kue_desc));
if (err) {
aprint_error_dev(self, "could not read Ethernet descriptor\n");
return;
}
sc->kue_mcfilters = malloc(KUE_MCFILTCNT(sc) * ETHER_ADDR_LEN,
M_USBDEV, M_NOWAIT);
if (sc->kue_mcfilters == NULL) {
aprint_error_dev(self,
"no memory for multicast filter buffer\n");
return;
}
s = splnet();
/*
* A KLSI chip was detected. Inform the world.
*/
aprint_normal_dev(self, "Ethernet address %s\n",
ether_sprintf(sc->kue_desc.kue_macaddr));
/* Initialize interface info.*/
ifp = GET_IFP(sc);
ifp->if_softc = sc;
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = kue_ioctl;
ifp->if_start = kue_start;
ifp->if_watchdog = kue_watchdog;
strncpy(ifp->if_xname, device_xname(sc->kue_dev), IFNAMSIZ);
IFQ_SET_READY(&ifp->if_snd);
/* Attach the interface. */
if_attach(ifp);
ether_ifattach(ifp, sc->kue_desc.kue_macaddr);
rnd_attach_source(&sc->rnd_source, device_xname(sc->kue_dev),
RND_TYPE_NET, RND_FLAG_DEFAULT);
sc->kue_attached = true;
splx(s);
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->kue_udev,
sc->kue_dev);
return;
}
void
uscanner_attach(device_t parent, device_t self, void *aux)
{
struct uscanner_softc *sc = device_private(self);
struct usb_attach_arg *uaa = aux;
usb_interface_descriptor_t *id = 0;
usb_endpoint_descriptor_t *ed, *ed_bulkin = NULL, *ed_bulkout = NULL;
char *devinfop;
int i;
usbd_status err;
sc->sc_dev = self;
aprint_naive("\n");
aprint_normal("\n");
devinfop = usbd_devinfo_alloc(uaa->device, 0);
aprint_normal_dev(self, "%s\n", devinfop);
usbd_devinfo_free(devinfop);
sc->sc_dev_flags = uscanner_lookup(uaa->vendor, uaa->product)->flags;
sc->sc_udev = uaa->device;
err = usbd_set_config_no(uaa->device, 1, 1); /* XXX */
if (err) {
aprint_error_dev(self, "failed to set configuration"
", err=%s\n", usbd_errstr(err));
sc->sc_dying = 1;
return;
}
/* XXX We only check the first interface */
err = usbd_device2interface_handle(sc->sc_udev, 0, &sc->sc_iface);
if (!err && sc->sc_iface)
id = usbd_get_interface_descriptor(sc->sc_iface);
if (err || id == 0) {
aprint_error_dev(self,
"could not get interface descriptor, err=%d,id=%p\n",
err, id);
sc->sc_dying = 1;
return;
}
/* Find the two first bulk endpoints */
for (i = 0 ; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (ed == 0) {
aprint_error_dev(self,
"could not read endpoint descriptor\n");
sc->sc_dying = 1;
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN
&& (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
ed_bulkin = ed;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT
&& (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
ed_bulkout = ed;
}
if (ed_bulkin && ed_bulkout) /* found all we need */
break;
}
/* Verify that we got something sensible */
if (ed_bulkin == NULL || ed_bulkout == NULL) {
aprint_error_dev(self,
"bulk-in and/or bulk-out endpoint not found\n");
sc->sc_dying = 1;
return;
}
sc->sc_bulkin = ed_bulkin->bEndpointAddress;
sc->sc_bulkout = ed_bulkout->bEndpointAddress;
selinit(&sc->sc_selq);
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
sc->sc_dev);
return;
}
static int
ndisusb_attach(device_t self)
{
struct drvdb_ent *db;
struct ndisusb_softc *dummy = device_get_softc(self);
struct usb_attach_arg *uaa = device_get_ivars(self);
struct ndis_softc *sc;
struct ndis_usb_type *t;
driver_object *drv;
int devidx = 0;
usbd_status status;
wlan_serialize_enter();
sc = (struct ndis_softc *)dummy;
if (uaa->device == NULL) {
wlan_serialize_exit();
return ENXIO;
}
db = windrv_match((matchfuncptr)ndisusb_devcompare, self);
if (db == NULL) {
wlan_serialize_exit();
return (ENXIO);
}
sc->ndis_dev = self;
sc->ndis_dobj = db->windrv_object;
sc->ndis_regvals = db->windrv_regvals;
sc->ndis_iftype = PNPBus;
/* Create PDO for this device instance */
drv = windrv_lookup(0, "USB Bus");
windrv_create_pdo(drv, self);
status = usbd_set_config_no(uaa->device, NDISUSB_CONFIG_NO, 0);
if (status != USBD_NORMAL_COMPLETION) {
device_printf(self, "setting config no failed\n");
wlan_serialize_exit();
return (ENXIO);
}
/* Figure out exactly which device we matched. */
t = db->windrv_devlist;
while (t->ndis_name != NULL) {
if ((uaa->vendor == t->ndis_vid) &&
(uaa->product == t->ndis_did)) {
sc->ndis_devidx = devidx;
break;
}
t++;
devidx++;
}
if (ndis_attach(self) != 0) {
wlan_serialize_exit();
return ENXIO;
}
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, uaa->device, self);
wlan_serialize_exit();
return 0;
}
