static void
g_modem_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct g_modem_softc *sc = usbd_xfer_softc(xfer);
int actlen;
int aframes;
usbd_xfer_status(xfer, &actlen, NULL, &aframes, NULL);
DPRINTF("st=%d aframes=%d actlen=%d bytes\n",
USB_GET_STATE(xfer), aframes, actlen);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
sc->sc_throughput += actlen;
if (sc->sc_mode == G_MODEM_MODE_LOOP) {
sc->sc_tx_busy = 1;
sc->sc_data_len = actlen;
usbd_transfer_start(sc->sc_xfer[G_MODEM_BULK_WR]);
break;
}
case USB_ST_SETUP:
tr_setup:
if ((sc->sc_mode == G_MODEM_MODE_SILENT) ||
(sc->sc_tx_busy != 0))
break;
usbd_xfer_set_frame_data(xfer, 0, sc->sc_data_buf, G_MODEM_BUFSIZE);
usbd_xfer_set_frames(xfer, 1);
usbd_transfer_submit(xfer);
break;
default: /* Error */
DPRINTF("error=%s\n", usbd_errstr(error));
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
break;
}
}
/*------------------------------------------------------------------------*
* usb_handle_request
*
* Internal state sequence:
*
* USB_HR_NOT_COMPLETE -> USB_HR_COMPLETE_OK v USB_HR_COMPLETE_ERR
*
* Returns:
* 0: Ready to start hardware
* Else: Stall current transfer, if any
*------------------------------------------------------------------------*/
static usb_error_t
usb_handle_request(struct usb_xfer *xfer)
{
struct usb_device_request req;
struct usb_device *udev;
const void *src_zcopy; /* zero-copy source pointer */
const void *src_mcopy; /* non zero-copy source pointer */
uint16_t off; /* data offset */
uint16_t rem; /* data remainder */
uint16_t max_len; /* max fragment length */
uint16_t wValue;
uint16_t wIndex;
uint8_t state;
uint8_t is_complete = 1;
usb_error_t err;
union {
uWord wStatus;
uint8_t buf[2];
} temp;
/*
* Filter the USB transfer state into
* something which we understand:
*/
switch (USB_GET_STATE(xfer)) {
case USB_ST_SETUP:
state = USB_HR_NOT_COMPLETE;
if (!xfer->flags_int.control_act) {
/* nothing to do */
goto tr_stalled;
}
break;
case USB_ST_TRANSFERRED:
if (!xfer->flags_int.control_act) {
state = USB_HR_COMPLETE_OK;
} else {
state = USB_HR_NOT_COMPLETE;
}
break;
default:
state = USB_HR_COMPLETE_ERR;
break;
}
/* reset frame stuff */
usbd_xfer_set_frame_len(xfer, 0, 0);
usbd_xfer_set_frame_offset(xfer, 0, 0);
usbd_xfer_set_frame_offset(xfer, sizeof(req), 1);
/* get the current request, if any */
usbd_copy_out(xfer->frbuffers, 0, &req, sizeof(req));
if (xfer->flags_int.control_rem == 0xFFFF) {
/* first time - not initialised */
rem = UGETW(req.wLength);
off = 0;
} else {
/* not first time - initialised */
rem = xfer->flags_int.control_rem;
off = UGETW(req.wLength) - rem;
}
/* set some defaults */
max_len = 0;
src_zcopy = NULL;
src_mcopy = NULL;
udev = xfer->xroot->udev;
/* get some request fields decoded */
wValue = UGETW(req.wValue);
wIndex = UGETW(req.wIndex);
DPRINTF("req 0x%02x 0x%02x 0x%04x 0x%04x "
"off=0x%x rem=0x%x, state=%d\n", req.bmRequestType,
req.bRequest, wValue, wIndex, off, rem, state);
/* demultiplex the control request */
switch (req.bmRequestType) {
case UT_READ_DEVICE:
if (state != USB_HR_NOT_COMPLETE) {
break;
}
switch (req.bRequest) {
case UR_GET_DESCRIPTOR:
goto tr_handle_get_descriptor;
case UR_GET_CONFIG:
goto tr_handle_get_config;
case UR_GET_STATUS:
goto tr_handle_get_status;
default:
goto tr_stalled;
}
break;
case UT_WRITE_DEVICE:
switch (req.bRequest) {
case UR_SET_ADDRESS:
goto tr_handle_set_address;
case UR_SET_CONFIG:
goto tr_handle_set_config;
case UR_CLEAR_FEATURE:
switch (wValue) {
case UF_DEVICE_REMOTE_WAKEUP:
goto tr_handle_clear_wakeup;
default:
goto tr_stalled;
}
break;
case UR_SET_FEATURE:
switch (wValue) {
case UF_DEVICE_REMOTE_WAKEUP:
goto tr_handle_set_wakeup;
default:
goto tr_stalled;
}
break;
default:
goto tr_stalled;
}
break;
case UT_WRITE_ENDPOINT:
switch (req.bRequest) {
case UR_CLEAR_FEATURE:
switch (wValue) {
case UF_ENDPOINT_HALT:
goto tr_handle_clear_halt;
default:
goto tr_stalled;
}
break;
case UR_SET_FEATURE:
switch (wValue) {
case UF_ENDPOINT_HALT:
goto tr_handle_set_halt;
default:
goto tr_stalled;
}
break;
default:
goto tr_stalled;
}
break;
case UT_READ_ENDPOINT:
switch (req.bRequest) {
case UR_GET_STATUS:
goto tr_handle_get_ep_status;
default:
goto tr_stalled;
}
break;
default:
/* we use "USB_ADD_BYTES" to de-const the src_zcopy */
err = usb_handle_iface_request(xfer,
USB_ADD_BYTES(&src_zcopy, 0),
&max_len, req, off, state);
if (err == 0) {
is_complete = 0;
goto tr_valid;
} else if (err == USB_ERR_SHORT_XFER) {
goto tr_valid;
}
/*
* Reset zero-copy pointer and max length
* variable in case they were unintentionally
* set:
*/
src_zcopy = NULL;
max_len = 0;
/*
* Check if we have a vendor specific
* descriptor:
*/
goto tr_handle_get_descriptor;
}
goto tr_valid;
tr_handle_get_descriptor:
err = (usb_temp_get_desc_p) (udev, &req, &src_zcopy, &max_len);
if (err)
goto tr_stalled;
if (src_zcopy == NULL)
goto tr_stalled;
goto tr_valid;
tr_handle_get_config:
temp.buf[0] = udev->curr_config_no;
src_mcopy = temp.buf;
max_len = 1;
goto tr_valid;
tr_handle_get_status:
wValue = 0;
USB_BUS_LOCK(udev->bus);
if (udev->flags.remote_wakeup) {
wValue |= UDS_REMOTE_WAKEUP;
}
if (udev->flags.self_powered) {
wValue |= UDS_SELF_POWERED;
}
USB_BUS_UNLOCK(udev->bus);
USETW(temp.wStatus, wValue);
src_mcopy = temp.wStatus;
max_len = sizeof(temp.wStatus);
goto tr_valid;
tr_handle_set_address:
if (state == USB_HR_NOT_COMPLETE) {
if (wValue >= 0x80) {
/* invalid value */
goto tr_stalled;
} else if (udev->curr_config_no != 0) {
/* we are configured ! */
goto tr_stalled;
}
} else if (state != USB_HR_NOT_COMPLETE) {
udev->address = (wValue & 0x7F);
goto tr_bad_context;
}
goto tr_valid;
tr_handle_set_config:
if (state == USB_HR_NOT_COMPLETE) {
if (usb_handle_set_config(xfer, req.wValue[0])) {
goto tr_stalled;
}
}
goto tr_valid;
tr_handle_clear_halt:
if (state == USB_HR_NOT_COMPLETE) {
if (usb_handle_set_stall(xfer, req.wIndex[0], 0)) {
goto tr_stalled;
}
}
goto tr_valid;
tr_handle_clear_wakeup:
if (state == USB_HR_NOT_COMPLETE) {
if (usb_handle_remote_wakeup(xfer, 0)) {
goto tr_stalled;
}
}
goto tr_valid;
tr_handle_set_halt:
if (state == USB_HR_NOT_COMPLETE) {
if (usb_handle_set_stall(xfer, req.wIndex[0], 1)) {
goto tr_stalled;
}
}
goto tr_valid;
tr_handle_set_wakeup:
if (state == USB_HR_NOT_COMPLETE) {
if (usb_handle_remote_wakeup(xfer, 1)) {
goto tr_stalled;
}
}
goto tr_valid;
tr_handle_get_ep_status:
if (state == USB_HR_NOT_COMPLETE) {
temp.wStatus[0] =
usb_handle_get_stall(udev, req.wIndex[0]);
temp.wStatus[1] = 0;
src_mcopy = temp.wStatus;
max_len = sizeof(temp.wStatus);
}
goto tr_valid;
tr_valid:
if (state != USB_HR_NOT_COMPLETE) {
goto tr_stalled;
}
/* subtract offset from length */
max_len -= off;
/* Compute the real maximum data length */
if (max_len > xfer->max_data_length) {
max_len = usbd_xfer_max_len(xfer);
}
if (max_len > rem) {
max_len = rem;
}
/*
* If the remainder is greater than the maximum data length,
* we need to truncate the value for the sake of the
* comparison below:
*/
if (rem > xfer->max_data_length) {
rem = usbd_xfer_max_len(xfer);
}
if ((rem != max_len) && (is_complete != 0)) {
/*
* If we don't transfer the data we can transfer, then
* the transfer is short !
*/
xfer->flags.force_short_xfer = 1;
xfer->nframes = 2;
} else {
/*
* Default case
*/
xfer->flags.force_short_xfer = 0;
xfer->nframes = max_len ? 2 : 1;
}
if (max_len > 0) {
if (src_mcopy) {
src_mcopy = USB_ADD_BYTES(src_mcopy, off);
usbd_copy_in(xfer->frbuffers + 1, 0,
src_mcopy, max_len);
usbd_xfer_set_frame_len(xfer, 1, max_len);
} else {
usbd_xfer_set_frame_data(xfer, 1,
USB_ADD_BYTES(src_zcopy, off), max_len);
}
} else {
/* the end is reached, send status */
xfer->flags.manual_status = 0;
usbd_xfer_set_frame_len(xfer, 1, 0);
}
DPRINTF("success\n");
return (0); /* success */
tr_stalled:
DPRINTF("%s\n", (state != USB_HR_NOT_COMPLETE) ?
"complete" : "stalled");
return (USB_ERR_STALLED);
tr_bad_context:
DPRINTF("bad context\n");
return (USB_ERR_BAD_CONTEXT);
}
static void
g_modem_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct g_modem_softc *sc = usbd_xfer_softc(xfer);
int actlen;
int aframes;
int mod;
int x;
int max;
usbd_xfer_status(xfer, &actlen, NULL, &aframes, NULL);
DPRINTF("st=%d aframes=%d actlen=%d bytes\n",
USB_GET_STATE(xfer), aframes, actlen);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
sc->sc_tx_busy = 0;
sc->sc_throughput += actlen;
if (sc->sc_mode == G_MODEM_MODE_LOOP) {
/* start loop */
usbd_transfer_start(sc->sc_xfer[G_MODEM_BULK_RD]);
break;
} else if ((sc->sc_mode == G_MODEM_MODE_PATTERN) && (sc->sc_tx_interval != 0)) {
/* wait for next timeout */
break;
}
case USB_ST_SETUP:
tr_setup:
if (sc->sc_mode == G_MODEM_MODE_PATTERN) {
mod = sc->sc_pattern_len;
max = sc->sc_tx_interval ? mod : G_MODEM_BUFSIZE;
if (mod == 0) {
for (x = 0; x != max; x++)
sc->sc_data_buf[x] = x % 255;
} else {
for (x = 0; x != max; x++)
sc->sc_data_buf[x] = sc->sc_pattern[x % mod];
}
usbd_xfer_set_frame_data(xfer, 0, sc->sc_data_buf, max);
usbd_xfer_set_interval(xfer, 0);
usbd_xfer_set_frames(xfer, 1);
usbd_transfer_submit(xfer);
} else if (sc->sc_mode == G_MODEM_MODE_LOOP) {
if (sc->sc_tx_busy == 0)
break;
x = sc->sc_tx_interval;
if (x < 0)
x = 0;
else if (x > 256)
x = 256;
usbd_xfer_set_frame_data(xfer, 0, sc->sc_data_buf, sc->sc_data_len);
usbd_xfer_set_interval(xfer, x);
usbd_xfer_set_frames(xfer, 1);
usbd_transfer_submit(xfer);
} else {
sc->sc_tx_busy = 0;
}
break;
default: /* Error */
DPRINTF("error=%s\n", usbd_errstr(error));
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
break;
}
}
static void
usie_if_rx_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct usie_softc *sc = usbd_xfer_softc(xfer);
struct ifnet *ifp = sc->sc_ifp;
struct mbuf *m0;
struct mbuf *m = NULL;
struct usie_desc *rxd;
uint32_t actlen;
uint16_t err;
uint16_t pkt;
uint16_t ipl;
uint16_t len;
uint16_t diff;
uint8_t pad;
uint8_t ipv;
usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
DPRINTFN(15, "rx done, actlen=%u\n", actlen);
if (actlen < sizeof(struct usie_hip)) {
DPRINTF("data too short %u\n", actlen);
goto tr_setup;
}
m = sc->sc_rxm;
sc->sc_rxm = NULL;
/* fall though */
case USB_ST_SETUP:
tr_setup:
if (sc->sc_rxm == NULL) {
sc->sc_rxm = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR,
MJUMPAGESIZE /* could be bigger than MCLBYTES */ );
}
if (sc->sc_rxm == NULL) {
DPRINTF("could not allocate Rx mbuf\n");
ifp->if_ierrors++;
usbd_xfer_set_stall(xfer);
usbd_xfer_set_frames(xfer, 0);
} else {
/*
* Directly loading a mbuf cluster into DMA to
* save some data copying. This works because
* there is only one cluster.
*/
usbd_xfer_set_frame_data(xfer, 0,
mtod(sc->sc_rxm, caddr_t), MIN(MJUMPAGESIZE, USIE_RXSZ_MAX));
usbd_xfer_set_frames(xfer, 1);
}
usbd_transfer_submit(xfer);
break;
default: /* Error */
DPRINTF("USB transfer error, %s\n", usbd_errstr(error));
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
ifp->if_ierrors++;
goto tr_setup;
}
if (sc->sc_rxm != NULL) {
m_freem(sc->sc_rxm);
sc->sc_rxm = NULL;
}
break;
}
if (m == NULL)
return;
mtx_unlock(&sc->sc_mtx);
m->m_pkthdr.len = m->m_len = actlen;
err = pkt = 0;
/* HW can aggregate multiple frames in a single USB xfer */
for (;;) {
rxd = mtod(m, struct usie_desc *);
len = be16toh(rxd->hip.len) & USIE_HIP_IP_LEN_MASK;
pad = (rxd->hip.id & USIE_HIP_PAD) ? 1 : 0;
ipl = (len - pad - ETHER_HDR_LEN);
if (ipl >= len) {
DPRINTF("Corrupt frame\n");
m_freem(m);
break;
}
diff = sizeof(struct usie_desc) + ipl + pad;
if (((rxd->hip.id & USIE_HIP_MASK) != USIE_HIP_IP) ||
(be16toh(rxd->desc_type) & USIE_TYPE_MASK) != USIE_IP_RX) {
DPRINTF("received wrong type of packet\n");
m->m_data += diff;
m->m_pkthdr.len = (m->m_len -= diff);
err++;
if (m->m_pkthdr.len > 0)
continue;
m_freem(m);
break;
}
switch (be16toh(rxd->ethhdr.ether_type)) {
case ETHERTYPE_IP:
ipv = NETISR_IP;
break;
#ifdef INET6
case ETHERTYPE_IPV6:
ipv = NETISR_IPV6;
break;
#endif
default:
DPRINTF("unsupported ether type\n");
err++;
break;
}
/* the last packet */
if (m->m_pkthdr.len <= diff) {
m->m_data += (sizeof(struct usie_desc) + pad);
m->m_pkthdr.len = m->m_len = ipl;
m->m_pkthdr.rcvif = ifp;
BPF_MTAP(sc->sc_ifp, m);
netisr_dispatch(ipv, m);
break;
}
/* copy aggregated frames to another mbuf */
m0 = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (__predict_false(m0 == NULL)) {
DPRINTF("could not allocate mbuf\n");
err++;
m_freem(m);
break;
}
m_copydata(m, sizeof(struct usie_desc) + pad, ipl, mtod(m0, caddr_t));
m0->m_pkthdr.rcvif = ifp;
m0->m_pkthdr.len = m0->m_len = ipl;
BPF_MTAP(sc->sc_ifp, m0);
netisr_dispatch(ipv, m0);
m->m_data += diff;
m->m_pkthdr.len = (m->m_len -= diff);
}
mtx_lock(&sc->sc_mtx);
ifp->if_ierrors += err;
ifp->if_ipackets += pkt;
}
static void
cdce_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct cdce_softc *sc = usbd_xfer_softc(xfer);
struct mbuf *m;
uint8_t x;
int actlen, aframes, len;
usbd_xfer_status(xfer, &actlen, NULL, &aframes, NULL);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
DPRINTF("received %u bytes in %u frames\n", actlen, aframes);
for (x = 0; x != aframes; x++) {
m = sc->sc_rx_buf[x];
sc->sc_rx_buf[x] = NULL;
len = usbd_xfer_frame_len(xfer, x);
/* Strip off CRC added by Zaurus, if any */
if ((sc->sc_flags & CDCE_FLAG_ZAURUS) && len >= 14)
len -= 4;
if (len < sizeof(struct ether_header)) {
m_freem(m);
continue;
}
/* queue up mbuf */
uether_rxmbuf(&sc->sc_ue, m, len);
}
/* FALLTHROUGH */
case USB_ST_SETUP:
/*
* TODO: Implement support for multi frame transfers,
* when the USB hardware supports it.
*/
for (x = 0; x != 1; x++) {
if (sc->sc_rx_buf[x] == NULL) {
m = uether_newbuf();
if (m == NULL)
goto tr_stall;
sc->sc_rx_buf[x] = m;
} else {
m = sc->sc_rx_buf[x];
}
usbd_xfer_set_frame_data(xfer, x, m->m_data, m->m_len);
}
/* set number of frames and start hardware */
usbd_xfer_set_frames(xfer, x);
usbd_transfer_submit(xfer);
/* flush any received frames */
uether_rxflush(&sc->sc_ue);
break;
default: /* Error */
DPRINTF("error = %s\n",
usbd_errstr(error));
if (error != USB_ERR_CANCELLED) {
tr_stall:
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
usbd_xfer_set_frames(xfer, 0);
usbd_transfer_submit(xfer);
break;
}
/* need to free the RX-mbufs when we are cancelled */
cdce_free_queue(sc->sc_rx_buf, CDCE_FRAMES_MAX);
break;
}
}
static void
cdce_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct cdce_softc *sc = usbd_xfer_softc(xfer);
struct ifnet *ifp = uether_getifp(&sc->sc_ue);
struct mbuf *m;
struct mbuf *mt;
uint32_t crc;
uint8_t x;
int actlen, aframes;
usbd_xfer_status(xfer, &actlen, NULL, &aframes, NULL);
DPRINTFN(1, "\n");
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
DPRINTFN(11, "transfer complete: %u bytes in %u frames\n",
actlen, aframes);
ifp->if_opackets++;
/* free all previous TX buffers */
cdce_free_queue(sc->sc_tx_buf, CDCE_FRAMES_MAX);
/* FALLTHROUGH */
case USB_ST_SETUP:
tr_setup:
for (x = 0; x != CDCE_FRAMES_MAX; x++) {
IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
if (m == NULL)
break;
if (sc->sc_flags & CDCE_FLAG_ZAURUS) {
/*
* Zaurus wants a 32-bit CRC appended
* to every frame
*/
crc = cdce_m_crc32(m, 0, m->m_pkthdr.len);
crc = htole32(crc);
if (!m_append(m, 4, (void *)&crc)) {
m_freem(m);
ifp->if_oerrors++;
continue;
}
}
if (m->m_len != m->m_pkthdr.len) {
mt = m_defrag(m, M_DONTWAIT);
if (mt == NULL) {
m_freem(m);
ifp->if_oerrors++;
continue;
}
m = mt;
}
if (m->m_pkthdr.len > MCLBYTES) {
m->m_pkthdr.len = MCLBYTES;
}
sc->sc_tx_buf[x] = m;
usbd_xfer_set_frame_data(xfer, x, m->m_data, m->m_len);
/*
* If there's a BPF listener, bounce a copy of
* this frame to him:
*/
BPF_MTAP(ifp, m);
}
if (x != 0) {
usbd_xfer_set_frames(xfer, x);
usbd_transfer_submit(xfer);
}
break;
default: /* Error */
DPRINTFN(11, "transfer error, %s\n",
usbd_errstr(error));
/* free all previous TX buffers */
cdce_free_queue(sc->sc_tx_buf, CDCE_FRAMES_MAX);
/* count output errors */
ifp->if_oerrors++;
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
break;
}
}
static void
ipheth_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct ipheth_softc *sc = usbd_xfer_softc(xfer);
struct mbuf *m;
uint8_t x;
int actlen;
int aframes;
int len;
usbd_xfer_status(xfer, &actlen, NULL, &aframes, NULL);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
DPRINTF("received %u bytes in %u frames\n", actlen, aframes);
for (x = 0; x != aframes; x++) {
m = sc->sc_rx_buf[x];
sc->sc_rx_buf[x] = NULL;
len = usbd_xfer_frame_len(xfer, x);
if (len < (sizeof(struct ether_header) +
IPHETH_RX_ADJ)) {
m_freem(m);
continue;
}
m_adj(m, IPHETH_RX_ADJ);
/* queue up mbuf */
uether_rxmbuf(&sc->sc_ue, m, len - IPHETH_RX_ADJ);
}
/* FALLTHROUGH */
case USB_ST_SETUP:
for (x = 0; x != IPHETH_RX_FRAMES_MAX; x++) {
if (sc->sc_rx_buf[x] == NULL) {
m = uether_newbuf();
if (m == NULL)
goto tr_stall;
/* cancel alignment for ethernet */
m_adj(m, ETHER_ALIGN);
sc->sc_rx_buf[x] = m;
} else {
m = sc->sc_rx_buf[x];
}
usbd_xfer_set_frame_data(xfer, x, m->m_data, m->m_len);
}
/* set number of frames and start hardware */
usbd_xfer_set_frames(xfer, x);
usbd_transfer_submit(xfer);
/* flush any received frames */
uether_rxflush(&sc->sc_ue);
break;
default: /* Error */
DPRINTF("error = %s\n", usbd_errstr(error));
if (error != USB_ERR_CANCELLED) {
tr_stall:
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
usbd_xfer_set_frames(xfer, 0);
usbd_transfer_submit(xfer);
break;
}
/* need to free the RX-mbufs when we are cancelled */
ipheth_free_queue(sc->sc_rx_buf, IPHETH_RX_FRAMES_MAX);
break;
}
}
void
rtwn_bulk_rx_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct rtwn_usb_softc *uc = usbd_xfer_softc(xfer);
struct rtwn_softc *sc = &uc->uc_sc;
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211_node *ni;
struct mbuf *m = NULL, *next;
struct rtwn_data *data;
int8_t nf, rssi;
RTWN_ASSERT_LOCKED(sc);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
data = STAILQ_FIRST(&uc->uc_rx_active);
if (data == NULL)
goto tr_setup;
STAILQ_REMOVE_HEAD(&uc->uc_rx_active, next);
m = rtwn_report_intr(uc, xfer, data);
STAILQ_INSERT_TAIL(&uc->uc_rx_inactive, data, next);
/* FALLTHROUGH */
case USB_ST_SETUP:
tr_setup:
data = STAILQ_FIRST(&uc->uc_rx_inactive);
if (data == NULL) {
KASSERT(m == NULL, ("mbuf isn't NULL"));
goto finish;
}
STAILQ_REMOVE_HEAD(&uc->uc_rx_inactive, next);
STAILQ_INSERT_TAIL(&uc->uc_rx_active, data, next);
usbd_xfer_set_frame_data(xfer, 0, data->buf,
usbd_xfer_max_len(xfer));
usbd_transfer_submit(xfer);
/*
* To avoid LOR we should unlock our private mutex here to call
* ieee80211_input() because here is at the end of a USB
* callback and safe to unlock.
*/
while (m != NULL) {
next = m->m_next;
m->m_next = NULL;
ni = rtwn_rx_frame(sc, m, &rssi);
RTWN_UNLOCK(sc);
nf = RTWN_NOISE_FLOOR;
if (ni != NULL) {
if (ni->ni_flags & IEEE80211_NODE_HT)
m->m_flags |= M_AMPDU;
(void)ieee80211_input(ni, m, rssi - nf, nf);
ieee80211_free_node(ni);
} else {
(void)ieee80211_input_all(ic, m,
rssi - nf, nf);
}
RTWN_LOCK(sc);
m = next;
}
break;
default:
/* needs it to the inactive queue due to a error. */
data = STAILQ_FIRST(&uc->uc_rx_active);
if (data != NULL) {
STAILQ_REMOVE_HEAD(&uc->uc_rx_active, next);
STAILQ_INSERT_TAIL(&uc->uc_rx_inactive, data, next);
}
if (error != USB_ERR_CANCELLED) {
usbd_xfer_set_stall(xfer);
counter_u64_add(ic->ic_ierrors, 1);
goto tr_setup;
}
break;
}
finish:
/* Finished receive; age anything left on the FF queue by a little bump */
/*
* XXX TODO: just make this a callout timer schedule so we can
* flush the FF staging queue if we're approaching idle.
*/
#ifdef IEEE80211_SUPPORT_SUPERG
if (!(sc->sc_flags & RTWN_FW_LOADED) ||
sc->sc_ratectl != RTWN_RATECTL_NET80211)
rtwn_cmd_sleepable(sc, NULL, 0, rtwn_ff_flush_all);
#endif
/* Kick-start more transmit in case we stalled */
rtwn_start(sc);
}
