int main_full( void )
{
/* Usage instructions on http://www.FreeRTOS.org/Atmel_SAM4E_RTOS_Demo.html */
/* Initialise the LCD and output a bitmap. The IP address will also be
displayed on the LCD when it has been obtained. */
vInitialiseLCD();
/* If the file system is only going to be accessed from one task then
F_FS_THREAD_AWARE can be set to 0 and the set of example files are created
before the RTOS scheduler is started. If the file system is going to be
access from more than one task then F_FS_THREAD_AWARE must be set to 1 and
the set of sample files are created from the idle task hook function
vApplicationIdleHook(). */
#if( F_FS_THREAD_AWARE == 0 )
{
/* Initialise the drive and file system, then create a few example
files. The files can be viewed and accessed via the CLI. View the
documentation page for this demo (link at the top of this file) for more
information. */
vCreateAndVerifySampleFiles();
}
#endif
/* Register example generic, file system related and UDP related CLI
commands respectively. Type 'help' into the command console to view a list
of registered commands. */
vRegisterSampleCLICommands();
vRegisterFileSystemCLICommands();
vRegisterUDPCLICommands();
/* Initialise the network interface. Tasks that use the network are
created in the network event hook when the network is connected and ready
for use. The address values passed in here are used if ipconfigUSE_DHCP is
set to 0, or if ipconfigUSE_DHCP is set to 1 but a DHCP server cannot be
contacted. The IP address actually used is displayed on the LCD (after DHCP
has completed if DHCP is used). */
FreeRTOS_IPInit( ucIPAddress, ucNetMask, ucGatewayAddress, ucDNSServerAddress, ucMACAddress );
/* Create all the other standard demo tasks. */
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartQueuePeekTasks();
vStartCountingSemaphoreTasks();
vStartDynamicPriorityTasks();
vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_TASK_PRIORITY );
vStartQueueSetTasks();
vStartRecursiveMutexTasks();
vStartEventGroupTasks();
vStartTaskNotifyTask();
vStartInterruptSemaphoreTasks();
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
vStartInterruptQueueTasks();
/* Create the register check tasks, as described at the top of this
file */
xTaskCreate( prvRegTest1Task, "Reg1", configMINIMAL_STACK_SIZE, ( void * ) NULL, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvRegTest2Task, "Reg2", configMINIMAL_STACK_SIZE, ( void * ) NULL, tskIDLE_PRIORITY, NULL );
/* Start the scheduler itself. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. */
for( ;; );
}
int main_full( void )
{
TimerHandle_t xTimer = NULL;
/* Usage instructions on http://www.FreeRTOS.org/Atmel_SAM4E_RTOS_Demo.html */
/* Initialise the LCD and output a bitmap. The IP address will also be
displayed on the LCD when it has been obtained. */
vInitialiseLCD();
/* If the file system is only going to be accessed from one task then
F_FS_THREAD_AWARE can be set to 0 and the set of example files are created
before the RTOS scheduler is started. If the file system is going to be
access from more than one task then F_FS_THREAD_AWARE must be set to 1 and
the set of sample files are created from the idle task hook function
vApplicationIdleHook(). */
#if( F_FS_THREAD_AWARE == 0 )
{
/* Initialise the drive and file system, then create a few example
files. The files can be viewed and accessed via the CLI. View the
documentation page for this demo (link at the top of this file) for more
information. */
vCreateAndVerifySampleFiles();
}
#endif
/* Register example generic, file system related and UDP related CLI
commands respectively. Type 'help' into the command console to view a list
of registered commands. */
vRegisterSampleCLICommands();
vRegisterFileSystemCLICommands();
vRegisterUDPCLICommands();
/* Initialise the network interface. Tasks that use the network are
created in the network event hook when the network is connected and ready
for use. The address values passed in here are used if ipconfigUSE_DHCP is
set to 0, or if ipconfigUSE_DHCP is set to 1 but a DHCP server cannot be
contacted. The IP address actually used is displayed on the LCD (after DHCP
has completed if DHCP is used). */
FreeRTOS_IPInit( ucIPAddress, ucNetMask, ucGatewayAddress, ucDNSServerAddress, ucMACAddress );
/* Create all the other standard demo tasks. */
vStartLEDFlashTimers( mainNUM_FLASH_TIMER_LEDS );
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartQueuePeekTasks();
vStartCountingSemaphoreTasks();
vStartDynamicPriorityTasks();
vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_TASK_PRIORITY );
vStartQueueSetTasks();
vStartRecursiveMutexTasks();
vStartEventGroupTasks();
/* Create the software timer that performs the 'check' functionality, as
described at the top of this file. */
xTimer = xTimerCreate( "CheckTimer", /* A text name, purely to help debugging. */
( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */
pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
( void * ) 0, /* The ID is not used, so can be set to anything. */
prvCheckTimerCallback ); /* The callback function that inspects the status of all the other tasks. */
if( xTimer != NULL )
{
xTimerStart( xTimer, mainDONT_BLOCK );
}
/* Start the scheduler itself. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. */
for( ;; );
}
