void vFullDemoIdleHook( void )
{
static TimerHandle_t xCheckTimer = NULL;
if( xCheckTimer == NULL )
{
/* Create the software timer that performs the 'check'
functionality, in the full demo. This is not done before the
scheduler is started as to do so would prevent the standard demo
timer tasks from passing their tests (they expect the timer
command queue to be empty. */
xCheckTimer = xTimerCreate( "CheckTimer", /* A text name, purely to help debugging. */
mainCHECK_TIMER_PERIOD_MS, /* The timer period, in this case 3000ms (3s). */
pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
( void * ) 0, /* The ID is not used, so can be set to anything. */
prvCheckTimerCallback /* The callback function that inspects the status of all the other tasks. */
);
if( xCheckTimer != NULL )
{
xTimerStart( xCheckTimer, mainDONT_BLOCK );
}
/* Also start some timers that just flash LEDs. */
vStartLEDFlashTimers( mainNUMBER_OF_FLASH_TIMERS_LEDS );
}
}
/*
* Create the demo tasks then start the scheduler.
*/
int main_full( void )
{
TimerHandle_t xTimer = NULL;
/* Create the LCD task - this returns the queue to use when writing
messages to the LCD. */
xLCDQueue = xStartLCDTask();
/* Create all the other standard demo tasks. */
vStartLEDFlashTimers( mainNUM_FLASH_TIMER_LEDS );
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartQueuePeekTasks();
vStartInterruptQueueTasks();
/* Create the tasks defined within this file. */
xTaskCreate( prvRegTestTask1, "Reg1", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvRegTestTask2, "Reg2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
/* The PIC32MX795 uses an 8 deep fifo where TX interrupts are asserted
whilst the TX buffer is empty. This causes an issue with the test driver so
it is not used in this demo */
#if !defined(__32MX795F512L__)
vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
#endif
/* Create the software timer that performs the 'check' functionality, as
described at the top of this file. */
xTimer = xTimerCreate( "CheckTimer",/* A text name, purely to help debugging. */
( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */
pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
( void * ) 0, /* The ID is not used, so can be set to anything. */
prvCheckTimerCallback /* The callback function that inspects the status of all the other tasks. */
);
if( xTimer != NULL )
{
xTimerStart( xTimer, mainDONT_BLOCK );
}
/* A software timer is also used to start the high frequency timer test.
This is to ensure the test does not start before the kernel. This time a
one shot software timer is used. */
xTimer = xTimerCreate( "HighHzTimerSetup", 1, pdFALSE, ( void * ) 0, prvSetupHighFrequencyTimerTest );
if( xTimer != NULL )
{
xTimerStart( xTimer, mainDONT_BLOCK );
}
/* Finally start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. */
for( ;; );
}
/*
* Create the demo tasks then start the scheduler.
*/
int main_full( void )
{
xTimerHandle xTimer = NULL;
/* Create all the other standard demo tasks. */
vStartLEDFlashTimers( mainNUM_FLASH_TIMER_LEDS );
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartQueuePeekTasks();
vStartInterruptQueueTasks();
vStartISRTriggeredTask();
vStartCountingSemaphoreTasks();
vStartDynamicPriorityTasks();
vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_TASK_PRIORITY );
vStartQueueSetTasks();
vStartRecursiveMutexTasks();
/* Create the tasks defined within this file. */
xTaskCreate( prvRegTestTask1, /* The function that implements the task. */
"Reg1", /* Text name for the task to assist debugger - not used by FreeRTOS itself. */
configMINIMAL_STACK_SIZE, /* The stack size to allocate for the task - specified in words not bytes. */
NULL, /* The parameter to pass into the task - not used in this case so set to NULL. */
tskIDLE_PRIORITY, /* The priority to assign to the task. */
NULL ); /* Used to obtain a handle to the task being created - not used in this case so set to NULL. */
xTaskCreate( prvRegTestTask2, "Reg2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
/* Create the software timer that performs the 'check' functionality, as
described at the top of this file. */
xTimer = xTimerCreate( "CheckTimer",/* A text name, purely to help debugging. */
( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */
pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
( void * ) 0, /* The ID is not used, so can be set to anything. */
prvCheckTimerCallback ); /* The callback function that inspects the status of all the other tasks. */
if( xTimer != NULL )
{
xTimerStart( xTimer, mainDONT_BLOCK );
}
/* A software timer is also used to start the high frequency timer test.
This is to ensure the test does not start before the kernel. This time a
one shot software timer is used. */
xTimer = xTimerCreate( "HighHzTimerSetup", 1, pdFALSE, ( void * ) 0, prvSetupHighFrequencyTimerTest );
if( xTimer != NULL )
{
xTimerStart( xTimer, mainDONT_BLOCK );
}
/* Finally start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. http://www.freertos.org/a00111.html */
for( ;; );
}
void main_full( void )
{
TimerHandle_t xCheckTimer = NULL;
/* Prepare to run the full demo: Configure the IO, register the CLI
commands, and depending on configuration, generate a set of sample files on
a RAM disk. */
prvPrepareForFullDemo();
/* Start all the other standard demo/test tasks. The have not particular
functionality, but do demonstrate how to use the FreeRTOS API and test the
kernel port. */
vStartIntegerMathTasks( tskIDLE_PRIORITY );
vStartDynamicPriorityTasks();
vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
vCreateBlockTimeTasks();
vStartCountingSemaphoreTasks();
vStartGenericQueueTasks( tskIDLE_PRIORITY );
vStartRecursiveMutexTasks();
vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartLEDFlashTimers( mainNUMBER_OF_FLASH_TIMERS_LEDS );
/* Start the tasks that implements the command console on the UART, as
described above. */
vUARTCommandConsoleStart( mainUART_COMMAND_CONSOLE_STACK_SIZE, mainUART_COMMAND_CONSOLE_TASK_PRIORITY );
/* Create the software timer that performs the 'check' functionality,
as described at the top of this file. */
xCheckTimer = xTimerCreate( "CheckTimer", /* A text name, purely to help debugging. */
( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */
pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
( void * ) 0, /* The ID is not used, so can be set to anything. */
prvCheckTimerCallback /* The callback function that inspects the status of all the other tasks. */
);
if( xCheckTimer != NULL )
{
xTimerStart( xCheckTimer, mainDONT_BLOCK );
}
/* The set of tasks created by the following function call have to be
created last as they keep account of the number of tasks they expect to see
running. */
vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
/* Start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. */
for( ;; );
}
void vFullDemoIdleHook( void )
{
static uint32_t ulStartedTimers = pdFALSE;
if( ulStartedTimers == pdFALSE )
{
/* The flash timers are not created from main() as the timer demo needs
the entire timer command queue in order to perform some tests. */
vStartLEDFlashTimers( mainNUM_FLASH_TIMERS );
ulStartedTimers = pdTRUE;
}
}
void vFullDemoIdleHook( void )
{
static TimerHandle_t xCheckTimer = NULL;
if( xCheckTimer == NULL )
{
/* Create the software timer that performs the 'check'
functionality, in the full demo. This is not done before the
scheduler is started as to do so would prevent the standard demo
timer tasks from passing their tests (they expect the timer
command queue to be empty. */
xCheckTimer = xTimerCreate( "CheckTimer", /* A text name, purely to help debugging. */
( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */
pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
( void * ) 0, /* The ID is not used, so can be set to anything. */
prvCheckTimerCallback ); /* The callback function that inspects the status of all the other tasks. */
if( xCheckTimer != NULL )
{
xTimerStart( xCheckTimer, mainDONT_BLOCK );
}
/* Also start some timers that just flash LEDs. */
vStartLEDFlashTimers( mainNUM_FLASH_TIMER_LEDS );
}
/* If the file system is only going to be accessed from one task then
F_FS_THREAD_AWARE can be set to 0 and the set of example files is created
before the RTOS scheduler is started. If the file system is going to be
access from more than one task then F_FS_THREAD_AWARE must be set to 1 and
the set of sample files are created from the idle task hook function. */
#if( F_FS_THREAD_AWARE == 1 )
{
static portBASE_TYPE xCreatedSampleFiles = pdFALSE;
/* Initialise the drive and file system, then create a few example
files. The output from this function just goes to the stdout window,
allowing the output to be viewed when the UDP command console is not
connected. */
if( xCreatedSampleFiles == pdFALSE )
{
vCreateAndVerifySampleFiles();
xCreatedSampleFiles = pdTRUE;
}
}
#endif
}
int main_full( void )
{
TimerHandle_t xTimer = NULL;
/* Usage instructions on http://www.FreeRTOS.org/Atmel_SAM4E_RTOS_Demo.html */
/* Initialise the LCD and output a bitmap. The IP address will also be
displayed on the LCD when it has been obtained. */
vInitialiseLCD();
/* If the file system is only going to be accessed from one task then
F_FS_THREAD_AWARE can be set to 0 and the set of example files are created
before the RTOS scheduler is started. If the file system is going to be
access from more than one task then F_FS_THREAD_AWARE must be set to 1 and
the set of sample files are created from the idle task hook function
vApplicationIdleHook(). */
#if( F_FS_THREAD_AWARE == 0 )
{
/* Initialise the drive and file system, then create a few example
files. The files can be viewed and accessed via the CLI. View the
documentation page for this demo (link at the top of this file) for more
information. */
vCreateAndVerifySampleFiles();
}
#endif
/* Register example generic, file system related and UDP related CLI
commands respectively. Type 'help' into the command console to view a list
of registered commands. */
vRegisterSampleCLICommands();
vRegisterFileSystemCLICommands();
vRegisterUDPCLICommands();
/* Initialise the network interface. Tasks that use the network are
created in the network event hook when the network is connected and ready
for use. The address values passed in here are used if ipconfigUSE_DHCP is
set to 0, or if ipconfigUSE_DHCP is set to 1 but a DHCP server cannot be
contacted. The IP address actually used is displayed on the LCD (after DHCP
has completed if DHCP is used). */
FreeRTOS_IPInit( ucIPAddress, ucNetMask, ucGatewayAddress, ucDNSServerAddress, ucMACAddress );
/* Create all the other standard demo tasks. */
vStartLEDFlashTimers( mainNUM_FLASH_TIMER_LEDS );
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartQueuePeekTasks();
vStartCountingSemaphoreTasks();
vStartDynamicPriorityTasks();
vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_TASK_PRIORITY );
vStartQueueSetTasks();
vStartRecursiveMutexTasks();
vStartEventGroupTasks();
/* Create the software timer that performs the 'check' functionality, as
described at the top of this file. */
xTimer = xTimerCreate( "CheckTimer", /* A text name, purely to help debugging. */
( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */
pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
( void * ) 0, /* The ID is not used, so can be set to anything. */
prvCheckTimerCallback ); /* The callback function that inspects the status of all the other tasks. */
if( xTimer != NULL )
{
xTimerStart( xTimer, mainDONT_BLOCK );
}
/* Start the scheduler itself. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. */
for( ;; );
}
