static void mainboard_enable(device_t dev)
{
device_t dev0;
u16 pmbase;
dev->ops->init = mainboard_init;
pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)),
PMBASE) & 0xff80;
printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
outl(0, pmbase + SMI_EN);
enable_lapic();
pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_BASE,
DEFAULT_GPIOBASE | 1);
pci_write_config8(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_CNTL,
0x10);
/* If we're resuming from suspend, blink suspend LED */
dev0 = dev_find_slot(0, PCI_DEVFN(0, 0));
if (dev0 && pci_read_config32(dev0, SKPAD) == SKPAD_ACPI_S3_MAGIC)
ec_write(0x0c, 0xc7);
#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE
/* Install custom int15 handler for VGA OPROM */
mainboard_interrupt_handlers(0x15, &int15_handler);
#endif
verb_setup();
}
static void mainboard_enable(device_t dev)
{
#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE
/* Install custom int15 handler for VGA OPROM */
mainboard_interrupt_handlers(0x15, &int15_handler);
#endif
verb_setup();
unsigned disable = 0;
if ((get_option(&disable, "ethernet1") == CB_SUCCESS) && disable) {
device_t nic = dev_find_slot(0, PCI_DEVFN(0x1c, 2));
if (nic) {
printk(BIOS_DEBUG, "DISABLE FIRST NIC!\n");
nic->enabled = 0;
}
}
disable = 0;
if ((get_option(&disable, "ethernet2") == CB_SUCCESS) && disable) {
device_t nic = dev_find_slot(0, PCI_DEVFN(0x1c, 3));
if (nic) {
printk(BIOS_DEBUG, "DISABLE SECOND NIC!\n");
nic->enabled = 0;
}
}
}
static void mainboard_enable(device_t dev)
{
#if CONFIG_PCI_ROM_RUN || CONFIG_VGA_ROM_RUN
/* Install custom int15 handler for VGA OPROM */
mainboard_interrupt_handlers(0x15, &int15_handler);
#endif
verb_setup();
}
static void mainboard_enable(device_t dev)
{
dev->ops->init = mainboard_init;
dev->ops->get_smbios_data = lumpy_onboard_smbios_data;
#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE
/* Install custom int15 handler for VGA OPROM */
mainboard_interrupt_handlers(0x15, &int15_handler);
#endif
verb_setup();
}
static void mainboard_enable(device_t dev)
{
dev->ops->init = mainboard_init;
dev->ops->get_smbios_data = butterfly_onboard_smbios_data;
#if CONFIG_PCI_ROM_RUN || CONFIG_VGA_ROM_RUN
/* Install custom int15 handler for VGA OPROM */
mainboard_interrupt_handlers(0x15, &int15_handler);
#endif
verb_setup();
}
static void mainboard_enable(device_t dev)
{
ec_setup();
verb_setup();
/* LCD panel type is SIO GPIO40-43.
It's controlled by a DIP switch but was always
set to 4 while only values of 5 and 6 worked. */
install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, (inb(0x60f) & 0x0f) + 1);
/* We have no driver for the embedded controller since the firmware
does most of the job. Hence, initialize keyboards here. */
pc_keyboard_init();
}
static void mainboard_enable(device_t dev)
{
dev->ops->init = mainboard_init;
install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
verb_setup();
}
static void mainboard_enable(device_t dev)
{
verb_setup();
}
static void mainboard_enable(device_t dev)
{
u16 pmbase;
printk(BIOS_SPEW, "starting SPI configuration\n");
/* Configure SPI. */
RCBA32(0x3800) = 0x07ff0500;
RCBA32(0x3804) = 0x3f046008;
RCBA32(0x3808) = 0x0058efc0;
RCBA32(0x384c) = 0x92000000;
RCBA32(0x3850) = 0x00000a0b;
RCBA32(0x3858) = 0x07ff0500;
RCBA32(0x385c) = 0x04ff0003;
RCBA32(0x3860) = 0x00020001;
RCBA32(0x3864) = 0x00000fff;
RCBA32(0x3874) = 0;
RCBA32(0x3890) = 0xf8400000;
RCBA32(0x3894) = 0x143b5006;
RCBA32(0x3898) = 0x05200302;
RCBA32(0x389c) = 0x0601209f;
RCBA32(0x38b0) = 0x00000004;
RCBA32(0x38b4) = 0x03040002;
RCBA32(0x38c0) = 0x00000007;
RCBA32(0x38c8) = 0x00002005;
RCBA32(0x38c4) = 0x00802005;
RCBA32(0x3804) = 0x3f04e008;
printk(BIOS_SPEW, "SPI configured\n");
int i;
const u8 dmp[256] = {
0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x89, 0xe4, 0x30, 0x00, 0x40, 0x14, 0x00, 0x00, 0x00, 0x11,
0x03, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0x00, 0xf4, 0x01, 0x00, 0x00, 0x01,
0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x62, 0x01, 0x04, 0x00, 0x08, 0x73, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08,
0x42, 0x07, 0x09, 0x09, 0xf0, 0x00, 0x00, 0xf0, 0xa9, 0x00, 0x00, 0x06, 0x00, 0x00, 0xff, 0x00,
0x00, 0x01, 0x00, 0x04, 0xff, 0xff, 0x00, 0x00, 0x00, 0xb1, 0x00, 0x00, 0x00, 0x00, 0x04, 0x0b,
0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x28, 0x1b, 0x21, 0x00, 0x2c, 0x3b, 0x13, 0x00,
0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x55, 0x5a, 0x57, 0x5c, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x45, 0x00, 0x00, 0x00,
0x52, 0x10, 0x52, 0x10, 0x64, 0x00, 0x00, 0x00, 0x74, 0x30, 0x00, 0x60, 0x00, 0x00, 0xaf, 0x0b,
0x30, 0x45, 0x2e, 0x30, 0x38, 0x41, 0x43, 0x2e, 0x30, 0x31, 0x2e, 0x31, 0x36, 0x20, 0x00, 0x00,
};
for (i = 0; i < 256; i++)
ec_write (i, dmp[i]);
pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)),
PMBASE) & 0xff80;
printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
outl(0, pmbase + SMI_EN);
enable_lapic();
pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_BASE,
DEFAULT_GPIOBASE | 1);
pci_write_config8(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_CNTL,
0x10);
#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE
/* Install custom int15 handler for VGA OPROM */
mainboard_interrupt_handlers(0x15, &int15_handler);
#endif
/* This sneaked in here, because EasyNote has no SuperIO chip.
*/
pc_keyboard_init();
verb_setup();
}
static void mainboard_enable(device_t dev)
{
install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
verb_setup();
}
// mainboard_enable is executed as first thing after
// enumerate_buses(). Is there no mainboard_init()?
static void mainboard_enable(device_t dev)
{
dev->ops->init = mainboard_init;
pcie_limit_power();
verb_setup();
}
