/* Later we can separate the rotation and scaler calc. If
* rotation is enabled, simply swap the destination dimension.
* And then pass the already swapped output size to this
* function. */
static int vpe_update_scaler(struct video_crop_t *pcrop)
{
uint32_t out_ROI_width, out_ROI_height;
uint32_t src_ROI_width, src_ROI_height;
uint32_t rc = 0; /* default to no zoom. */
/*
* phase_step_x, phase_step_y, phase_init_x and phase_init_y
* are represented in fixed-point, unsigned 3.29 format
*/
uint32_t phase_step_x = 0;
uint32_t phase_step_y = 0;
uint32_t phase_init_x = 0;
uint32_t phase_init_y = 0;
uint32_t src_roi, src_x, src_y, src_xy, temp;
uint32_t yscale_filter_sel, xscale_filter_sel;
uint32_t scale_unit_sel_x, scale_unit_sel_y;
uint64_t numerator, denominator;
if ((pcrop->in2_w >= pcrop->out2_w) &&
(pcrop->in2_h >= pcrop->out2_h)) {
CDBG(" =======VPE no zoom needed.\n");
temp = msm_io_r(vpe_device->vpebase + VPE_OP_MODE_OFFSET)
& 0xfffffffc;
msm_io_w(temp, vpe_device->vpebase + VPE_OP_MODE_OFFSET);
msm_io_w(0, vpe_device->vpebase + VPE_SRC_XY_OFFSET);
CDBG("vpe_ctrl->in_h_w = %d \n", vpe_ctrl->in_h_w);
msm_io_w(vpe_ctrl->in_h_w , vpe_device->vpebase +
VPE_SRC_SIZE_OFFSET);
return rc;
}
/* If fall through then scaler is needed.*/
CDBG("========VPE zoom needed.\n");
/* assumption is both direction need zoom. this can be
improved. */
temp =
msm_io_r(vpe_device->vpebase + VPE_OP_MODE_OFFSET) | 0x3;
msm_io_w(temp, vpe_device->vpebase + VPE_OP_MODE_OFFSET);
src_ROI_width = pcrop->in2_w;
src_ROI_height = pcrop->in2_h;
out_ROI_width = pcrop->out2_w;
out_ROI_height = pcrop->out2_h;
CDBG("src w = 0x%x, h=0x%x, dst w = 0x%x, h =0x%x.\n",
src_ROI_width, src_ROI_height, out_ROI_width,
out_ROI_height);
src_roi = (src_ROI_height << 16) + src_ROI_width;
msm_io_w(src_roi, vpe_device->vpebase + VPE_SRC_SIZE_OFFSET);
src_x = (out_ROI_width - src_ROI_width)/2;
src_y = (out_ROI_height - src_ROI_height)/2;
CDBG("src_x = %d, src_y=%d.\n", src_x, src_y);
src_xy = src_y*(1<<16) + src_x;
msm_io_w(src_xy, vpe_device->vpebase +
VPE_SRC_XY_OFFSET);
CDBG("src_xy = %d, src_roi=%d.\n", src_xy, src_roi);
/* decide whether to use FIR or M/N for scaling */
if ((out_ROI_width == 1 && src_ROI_width < 4) ||
(src_ROI_width < 4 * out_ROI_width - 3))
scale_unit_sel_x = 0;/* use FIR scalar */
else
scale_unit_sel_x = 1;/* use M/N scalar */
if ((out_ROI_height == 1 && src_ROI_height < 4) ||
(src_ROI_height < 4 * out_ROI_height - 3))
scale_unit_sel_y = 0;/* use FIR scalar */
else
scale_unit_sel_y = 1;/* use M/N scalar */
/* calculate phase step for the x direction */
/* if destination is only 1 pixel wide,
the value of phase_step_x
is unimportant. Assigning phase_step_x to
src ROI width as an arbitrary value. */
if (out_ROI_width == 1)
phase_step_x = (uint32_t) ((src_ROI_width) <<
SCALER_PHASE_BITS);
/* if using FIR scalar */
else if (scale_unit_sel_x == 0) {
/* Calculate the quotient ( src_ROI_width - 1 )
/ ( out_ROI_width - 1)
with u3.29 precision. Quotient is rounded up to
the larger 29th decimal point. */
numerator = (uint64_t)(src_ROI_width - 1) <<
SCALER_PHASE_BITS;
/* never equals to 0 because of the
"(out_ROI_width == 1 )"*/
denominator = (uint64_t)(out_ROI_width - 1);
/* divide and round up to the larger 29th
decimal point. */
phase_step_x = (uint32_t) vpe_do_div((numerator +
denominator - 1), denominator);
} else if (scale_unit_sel_x == 1) { /* if M/N scalar */
/* Calculate the quotient ( src_ROI_width ) /
( out_ROI_width)
with u3.29 precision. Quotient is rounded down to the
smaller 29th decimal point. */
numerator = (uint64_t)(src_ROI_width) <<
SCALER_PHASE_BITS;
denominator = (uint64_t)(out_ROI_width);
phase_step_x =
(uint32_t) vpe_do_div(numerator, denominator);
}
/* calculate phase step for the y direction */
/* if destination is only 1 pixel wide, the value of
phase_step_x is unimportant. Assigning phase_step_x
to src ROI width as an arbitrary value. */
if (out_ROI_height == 1)
phase_step_y =
(uint32_t) ((src_ROI_height) << SCALER_PHASE_BITS);
/* if FIR scalar */
else if (scale_unit_sel_y == 0) {
/* Calculate the quotient ( src_ROI_height - 1 ) /
( out_ROI_height - 1)
with u3.29 precision. Quotient is rounded up to the
larger 29th decimal point. */
numerator = (uint64_t)(src_ROI_height - 1) <<
SCALER_PHASE_BITS;
/* never equals to 0 because of the "
( out_ROI_height == 1 )" case */
denominator = (uint64_t)(out_ROI_height - 1);
/* Quotient is rounded up to the larger
29th decimal point. */
phase_step_y =
(uint32_t) vpe_do_div(
(numerator + denominator - 1), denominator);
} else if (scale_unit_sel_y == 1) { /* if M/N scalar */
/* Calculate the quotient ( src_ROI_height )
/ ( out_ROI_height)
with u3.29 precision. Quotient is rounded down
to the smaller 29th decimal point. */
numerator = (uint64_t)(src_ROI_height) <<
SCALER_PHASE_BITS;
denominator = (uint64_t)(out_ROI_height);
phase_step_y = (uint32_t) vpe_do_div(
numerator, denominator);
}
/* decide which set of FIR coefficients to use */
if (phase_step_x > HAL_MDP_PHASE_STEP_2P50)
xscale_filter_sel = 0;
else if (phase_step_x > HAL_MDP_PHASE_STEP_1P66)
xscale_filter_sel = 1;
else if (phase_step_x > HAL_MDP_PHASE_STEP_1P25)
xscale_filter_sel = 2;
else
xscale_filter_sel = 3;
if (phase_step_y > HAL_MDP_PHASE_STEP_2P50)
yscale_filter_sel = 0;
else if (phase_step_y > HAL_MDP_PHASE_STEP_1P66)
yscale_filter_sel = 1;
else if (phase_step_y > HAL_MDP_PHASE_STEP_1P25)
yscale_filter_sel = 2;
else
yscale_filter_sel = 3;
/* calculate phase init for the x direction */
/* if using FIR scalar */
if (scale_unit_sel_x == 0) {
if (out_ROI_width == 1)
phase_init_x =
(uint32_t) ((src_ROI_width - 1) <<
SCALER_PHASE_BITS);
else
phase_init_x = 0;
} else if (scale_unit_sel_x == 1) /* M over N scalar */
phase_init_x = 0;
/* calculate phase init for the y direction
if using FIR scalar */
if (scale_unit_sel_y == 0) {
if (out_ROI_height == 1)
phase_init_y =
(uint32_t) ((src_ROI_height -
1) << SCALER_PHASE_BITS);
else
phase_init_y = 0;
} else if (scale_unit_sel_y == 1) /* M over N scalar */
phase_init_y = 0;
CDBG("phase step x = %d, step y = %d.\n",
phase_step_x, phase_step_y);
CDBG("phase init x = %d, init y = %d.\n",
phase_init_x, phase_init_y);
msm_io_w(phase_step_x, vpe_device->vpebase +
VPE_SCALE_PHASEX_STEP_OFFSET);
msm_io_w(phase_step_y, vpe_device->vpebase +
VPE_SCALE_PHASEY_STEP_OFFSET);
msm_io_w(phase_init_x, vpe_device->vpebase +
VPE_SCALE_PHASEX_INIT_OFFSET);
msm_io_w(phase_init_y, vpe_device->vpebase +
VPE_SCALE_PHASEY_INIT_OFFSET);
return 1;
}
static int vpe_update_scaler_with_dis(struct video_crop_t *pcrop,
struct dis_offset_type *dis_offset)
{
uint32_t out_ROI_width, out_ROI_height;
uint32_t src_ROI_width, src_ROI_height;
uint32_t rc = 0; /* default to no zoom. */
/*
* phase_step_x, phase_step_y, phase_init_x and phase_init_y
* are represented in fixed-point, unsigned 3.29 format
*/
uint32_t phase_step_x = 0;
uint32_t phase_step_y = 0;
uint32_t phase_init_x = 0;
uint32_t phase_init_y = 0;
uint32_t src_roi, temp;
int32_t src_x, src_y, src_xy;
uint32_t yscale_filter_sel, xscale_filter_sel;
uint32_t scale_unit_sel_x, scale_unit_sel_y;
uint64_t numerator, denominator;
int32_t zoom_dis_x, zoom_dis_y;
CDBG("%s: pcrop->in2_w = %d, pcrop->in2_h = %d\n", __func__,
pcrop->in2_w, pcrop->in2_h);
CDBG("%s: pcrop->out2_w = %d, pcrop->out2_h = %d\n", __func__,
pcrop->out2_w, pcrop->out2_h);
if ((pcrop->in2_w >= pcrop->out2_w) &&
(pcrop->in2_h >= pcrop->out2_h)) {
CDBG(" =======VPE no zoom needed, DIS is still enabled. \n");
temp = msm_io_r(vpe_device->vpebase + VPE_OP_MODE_OFFSET)
& 0xfffffffc;
msm_io_w(temp, vpe_device->vpebase + VPE_OP_MODE_OFFSET);
/* no zoom, use dis offset directly. */
src_xy = dis_offset->dis_offset_y * (1<<16) +
dis_offset->dis_offset_x;
msm_io_w(src_xy, vpe_device->vpebase + VPE_SRC_XY_OFFSET);
CDBG("vpe_ctrl->in_h_w = 0x%x \n", vpe_ctrl->in_h_w);
msm_io_w(vpe_ctrl->in_h_w, vpe_device->vpebase +
VPE_SRC_SIZE_OFFSET);
return rc;
}
/* If fall through then scaler is needed.*/
CDBG("========VPE zoom needed + DIS enabled.\n");
/* assumption is both direction need zoom. this can be
improved. */
temp = msm_io_r(vpe_device->vpebase +
VPE_OP_MODE_OFFSET) | 0x3;
msm_io_w(temp, vpe_device->vpebase +
VPE_OP_MODE_OFFSET);
zoom_dis_x = dis_offset->dis_offset_x *
pcrop->in2_w / pcrop->out2_w;
zoom_dis_y = dis_offset->dis_offset_y *
pcrop->in2_h / pcrop->out2_h;
src_x = zoom_dis_x + (pcrop->out2_w-pcrop->in2_w)/2;
src_y = zoom_dis_y + (pcrop->out2_h-pcrop->in2_h)/2;
out_ROI_width = vpe_ctrl->out_w;
out_ROI_height = vpe_ctrl->out_h;
src_ROI_width = out_ROI_width * pcrop->in2_w / pcrop->out2_w;
src_ROI_height = out_ROI_height * pcrop->in2_h / pcrop->out2_h;
/* clamp to output size. This is because along
processing, we mostly do truncation, therefore
dis_offset tends to be
smaller values. The intention was to make sure that the
offset does not exceed margin. But in the case it could
result src_roi bigger, due to subtract a smaller value. */
CDBG("src w = 0x%x, h=0x%x, dst w = 0x%x, h =0x%x.\n",
src_ROI_width, src_ROI_height, out_ROI_width,
out_ROI_height);
src_roi = (src_ROI_height << 16) + src_ROI_width;
msm_io_w(src_roi, vpe_device->vpebase + VPE_SRC_SIZE_OFFSET);
CDBG("src_x = %d, src_y=%d.\n", src_x, src_y);
src_xy = src_y*(1<<16) + src_x;
msm_io_w(src_xy, vpe_device->vpebase +
VPE_SRC_XY_OFFSET);
CDBG("src_xy = 0x%x, src_roi=0x%x.\n", src_xy, src_roi);
/* decide whether to use FIR or M/N for scaling */
if ((out_ROI_width == 1 && src_ROI_width < 4) ||
(src_ROI_width < 4 * out_ROI_width - 3))
scale_unit_sel_x = 0;/* use FIR scalar */
else
scale_unit_sel_x = 1;/* use M/N scalar */
if ((out_ROI_height == 1 && src_ROI_height < 4) ||
(src_ROI_height < 4 * out_ROI_height - 3))
scale_unit_sel_y = 0;/* use FIR scalar */
else
scale_unit_sel_y = 1;/* use M/N scalar */
/* calculate phase step for the x direction */
/* if destination is only 1 pixel wide, the value of
phase_step_x is unimportant. Assigning phase_step_x
to src ROI width as an arbitrary value. */
if (out_ROI_width == 1)
phase_step_x = (uint32_t) ((src_ROI_width) <<
SCALER_PHASE_BITS);
else if (scale_unit_sel_x == 0) { /* if using FIR scalar */
/* Calculate the quotient ( src_ROI_width - 1 )
/ ( out_ROI_width - 1)with u3.29 precision.
Quotient is rounded up to the larger
29th decimal point. */
numerator =
(uint64_t)(src_ROI_width - 1) <<
SCALER_PHASE_BITS;
/* never equals to 0 because of the "
(out_ROI_width == 1 )"*/
denominator = (uint64_t)(out_ROI_width - 1);
/* divide and round up to the larger 29th
decimal point. */
phase_step_x = (uint32_t) vpe_do_div(
(numerator + denominator - 1), denominator);
} else if (scale_unit_sel_x == 1) { /* if M/N scalar */
/* Calculate the quotient
( src_ROI_width ) / ( out_ROI_width)
with u3.29 precision. Quotient is rounded
down to the smaller 29th decimal point. */
numerator = (uint64_t)(src_ROI_width) <<
SCALER_PHASE_BITS;
denominator = (uint64_t)(out_ROI_width);
phase_step_x =
(uint32_t) vpe_do_div(numerator, denominator);
}
/* calculate phase step for the y direction */
/* if destination is only 1 pixel wide, the value of
phase_step_x is unimportant. Assigning phase_step_x
to src ROI width as an arbitrary value. */
if (out_ROI_height == 1)
phase_step_y =
(uint32_t) ((src_ROI_height) << SCALER_PHASE_BITS);
else if (scale_unit_sel_y == 0) { /* if FIR scalar */
/* Calculate the quotient
( src_ROI_height - 1 ) / ( out_ROI_height - 1)
with u3.29 precision. Quotient is rounded up to the
larger 29th decimal point. */
numerator = (uint64_t)(src_ROI_height - 1) <<
SCALER_PHASE_BITS;
/* never equals to 0 because of the
"( out_ROI_height == 1 )" case */
denominator = (uint64_t)(out_ROI_height - 1);
/* Quotient is rounded up to the larger 29th
decimal point. */
phase_step_y =
(uint32_t) vpe_do_div(
(numerator + denominator - 1), denominator);
} else if (scale_unit_sel_y == 1) { /* if M/N scalar */
/* Calculate the quotient ( src_ROI_height ) / ( out_ROI_height)
with u3.29 precision. Quotient is rounded down to the smaller
29th decimal point. */
numerator = (uint64_t)(src_ROI_height) <<
SCALER_PHASE_BITS;
denominator = (uint64_t)(out_ROI_height);
phase_step_y = (uint32_t) vpe_do_div(
numerator, denominator);
}
/* decide which set of FIR coefficients to use */
if (phase_step_x > HAL_MDP_PHASE_STEP_2P50)
xscale_filter_sel = 0;
else if (phase_step_x > HAL_MDP_PHASE_STEP_1P66)
xscale_filter_sel = 1;
else if (phase_step_x > HAL_MDP_PHASE_STEP_1P25)
xscale_filter_sel = 2;
else
xscale_filter_sel = 3;
if (phase_step_y > HAL_MDP_PHASE_STEP_2P50)
yscale_filter_sel = 0;
else if (phase_step_y > HAL_MDP_PHASE_STEP_1P66)
yscale_filter_sel = 1;
else if (phase_step_y > HAL_MDP_PHASE_STEP_1P25)
yscale_filter_sel = 2;
else
yscale_filter_sel = 3;
/* calculate phase init for the x direction */
/* if using FIR scalar */
if (scale_unit_sel_x == 0) {
if (out_ROI_width == 1)
phase_init_x =
(uint32_t) ((src_ROI_width - 1) <<
SCALER_PHASE_BITS);
else
phase_init_x = 0;
} else if (scale_unit_sel_x == 1) /* M over N scalar */
phase_init_x = 0;
/* calculate phase init for the y direction
if using FIR scalar */
if (scale_unit_sel_y == 0) {
if (out_ROI_height == 1)
phase_init_y =
(uint32_t) ((src_ROI_height -
1) << SCALER_PHASE_BITS);
else
phase_init_y = 0;
} else if (scale_unit_sel_y == 1) /* M over N scalar */
phase_init_y = 0;
CDBG("phase step x = %d, step y = %d.\n",
phase_step_x, phase_step_y);
CDBG("phase init x = %d, init y = %d.\n",
phase_init_x, phase_init_y);
msm_io_w(phase_step_x, vpe_device->vpebase +
VPE_SCALE_PHASEX_STEP_OFFSET);
msm_io_w(phase_step_y, vpe_device->vpebase +
VPE_SCALE_PHASEY_STEP_OFFSET);
msm_io_w(phase_init_x, vpe_device->vpebase +
VPE_SCALE_PHASEX_INIT_OFFSET);
msm_io_w(phase_init_y, vpe_device->vpebase +
VPE_SCALE_PHASEY_INIT_OFFSET);
return 1;
}
static int vpe_update_scaler(struct msm_pp_crop *pcrop)
{
uint32_t out_ROI_width, out_ROI_height;
uint32_t src_ROI_width, src_ROI_height;
uint32_t phase_step_x = 0;
uint32_t phase_step_y = 0;
uint32_t phase_init_x = 0;
uint32_t phase_init_y = 0;
uint32_t src_roi, src_x, src_y, src_xy, temp;
uint32_t yscale_filter_sel, xscale_filter_sel;
uint32_t scale_unit_sel_x, scale_unit_sel_y;
uint64_t numerator, denominator;
temp =
msm_io_r(vpe_ctrl->vpebase + VPE_OP_MODE_OFFSET) | 0x3;
msm_io_w(temp, vpe_ctrl->vpebase + VPE_OP_MODE_OFFSET);
src_ROI_width = pcrop->src_w;
src_ROI_height = pcrop->src_h;
out_ROI_width = pcrop->dst_w;
out_ROI_height = pcrop->dst_h;
CDBG("src w = 0x%x, h=0x%x, dst w = 0x%x, h =0x%x.\n",
src_ROI_width, src_ROI_height, out_ROI_width,
out_ROI_height);
src_roi = (src_ROI_height << 16) + src_ROI_width;
msm_io_w(src_roi, vpe_ctrl->vpebase + VPE_SRC_SIZE_OFFSET);
src_x = pcrop->src_x;
src_y = pcrop->src_y;
CDBG("src_x = %d, src_y=%d.\n", src_x, src_y);
src_xy = src_y*(1<<16) + src_x;
msm_io_w(src_xy, vpe_ctrl->vpebase +
VPE_SRC_XY_OFFSET);
CDBG("src_xy = %d, src_roi=%d.\n", src_xy, src_roi);
if ((out_ROI_width == 1 && src_ROI_width < 4) ||
(src_ROI_width < 4 * out_ROI_width - 3))
scale_unit_sel_x = 0;
else
scale_unit_sel_x = 1;
if ((out_ROI_height == 1 && src_ROI_height < 4) ||
(src_ROI_height < 4 * out_ROI_height - 3))
scale_unit_sel_y = 0;
else
scale_unit_sel_y = 1;
if (out_ROI_width == 1)
phase_step_x = (uint32_t) ((src_ROI_width) <<
SCALER_PHASE_BITS);
else if (scale_unit_sel_x == 0) {
numerator = (uint64_t)(src_ROI_width - 1) <<
SCALER_PHASE_BITS;
denominator = (uint64_t)(out_ROI_width - 1);
phase_step_x = (uint32_t) vpe_do_div((numerator +
denominator - 1), denominator);
} else if (scale_unit_sel_x == 1) {
numerator = (uint64_t)(src_ROI_width) <<
SCALER_PHASE_BITS;
denominator = (uint64_t)(out_ROI_width);
phase_step_x =
(uint32_t) vpe_do_div(numerator, denominator);
}
if (out_ROI_height == 1)
phase_step_y =
(uint32_t) ((src_ROI_height) << SCALER_PHASE_BITS);
else if (scale_unit_sel_y == 0) {
numerator = (uint64_t)(src_ROI_height - 1) <<
SCALER_PHASE_BITS;
denominator = (uint64_t)(out_ROI_height - 1);
phase_step_y =
(uint32_t) vpe_do_div(
(numerator + denominator - 1), denominator);
} else if (scale_unit_sel_y == 1) {
numerator = (uint64_t)(src_ROI_height) <<
SCALER_PHASE_BITS;
denominator = (uint64_t)(out_ROI_height);
phase_step_y = (uint32_t) vpe_do_div(
numerator, denominator);
}
if (phase_step_x > HAL_MDP_PHASE_STEP_2P50)
xscale_filter_sel = 0;
else if (phase_step_x > HAL_MDP_PHASE_STEP_1P66)
xscale_filter_sel = 1;
else if (phase_step_x > HAL_MDP_PHASE_STEP_1P25)
xscale_filter_sel = 2;
else
xscale_filter_sel = 3;
if (phase_step_y > HAL_MDP_PHASE_STEP_2P50)
yscale_filter_sel = 0;
else if (phase_step_y > HAL_MDP_PHASE_STEP_1P66)
yscale_filter_sel = 1;
else if (phase_step_y > HAL_MDP_PHASE_STEP_1P25)
yscale_filter_sel = 2;
else
yscale_filter_sel = 3;
if (scale_unit_sel_x == 0) {
if (out_ROI_width == 1)
phase_init_x =
(uint32_t) ((src_ROI_width - 1) <<
SCALER_PHASE_BITS);
else
phase_init_x = 0;
} else if (scale_unit_sel_x == 1)
phase_init_x = 0;
if (scale_unit_sel_y == 0) {
if (out_ROI_height == 1)
phase_init_y =
(uint32_t) ((src_ROI_height -
1) << SCALER_PHASE_BITS);
else
phase_init_y = 0;
} else if (scale_unit_sel_y == 1)
phase_init_y = 0;
CDBG("phase step x = %d, step y = %d.\n",
phase_step_x, phase_step_y);
CDBG("phase init x = %d, init y = %d.\n",
phase_init_x, phase_init_y);
msm_io_w(phase_step_x, vpe_ctrl->vpebase +
VPE_SCALE_PHASEX_STEP_OFFSET);
msm_io_w(phase_step_y, vpe_ctrl->vpebase +
VPE_SCALE_PHASEY_STEP_OFFSET);
msm_io_w(phase_init_x, vpe_ctrl->vpebase +
VPE_SCALE_PHASEX_INIT_OFFSET);
msm_io_w(phase_init_y, vpe_ctrl->vpebase +
VPE_SCALE_PHASEY_INIT_OFFSET);
return 1;
}
