Ejemplo n.º 1
0
static void pass1(vpx_image_t *raw, FILE *infile, const char *outfile_name,
                  const VpxInterface *encoder, const vpx_codec_enc_cfg_t *cfg) {
  VpxVideoInfo info = { encoder->fourcc,
                        cfg->g_w,
                        cfg->g_h,
                        { cfg->g_timebase.num, cfg->g_timebase.den } };
  VpxVideoWriter *writer = NULL;
  vpx_codec_ctx_t codec;
  int frame_count = 0;

  writer = vpx_video_writer_open(outfile_name, kContainerIVF, &info);
  if (!writer) die("Failed to open %s for writing", outfile_name);

  if (vpx_codec_enc_init(&codec, encoder->codec_interface(), cfg, 0))
    die_codec(&codec, "Failed to initialize encoder");

  // Encode frames.
  while (vpx_img_read(raw, infile)) {
    ++frame_count;
    encode_frame(&codec, raw, frame_count, 1, 0, VPX_DL_GOOD_QUALITY, writer);
  }

  // Flush encoder.
  while (encode_frame(&codec, NULL, -1, 1, 0, VPX_DL_GOOD_QUALITY, writer)) {
  }

  printf("\n");

  if (vpx_codec_destroy(&codec)) die_codec(&codec, "Failed to destroy codec.");

  vpx_video_writer_close(writer);

  printf("Pass 1 complete. Processed %d frames.\n", frame_count);
}
Ejemplo n.º 2
0
int main(int argc, char **argv) {
  VpxVideoWriter *outfile[VPX_TS_MAX_LAYERS] = {NULL};
  vpx_codec_ctx_t codec;
  vpx_codec_enc_cfg_t cfg;
  int frame_cnt = 0;
  vpx_image_t raw;
  vpx_codec_err_t res;
  unsigned int width;
  unsigned int height;
  int speed;
  int frame_avail;
  int got_data;
  int flags = 0;
  unsigned int i;
  int pts = 0;  // PTS starts at 0.
  int frame_duration = 1;  // 1 timebase tick per frame.
  int layering_mode = 0;
  int layer_flags[VPX_TS_MAX_PERIODICITY] = {0};
  int flag_periodicity = 1;
#if VPX_ENCODER_ABI_VERSION > (4 + VPX_CODEC_ABI_VERSION)
  vpx_svc_layer_id_t layer_id = {0, 0};
#else
  vpx_svc_layer_id_t layer_id = {0};
#endif
  const VpxInterface *encoder = NULL;
  FILE *infile = NULL;
  struct RateControlMetrics rc;
  int64_t cx_time = 0;
  const int min_args_base = 11;
#if CONFIG_VP9_HIGHBITDEPTH
  vpx_bit_depth_t bit_depth = VPX_BITS_8;
  int input_bit_depth = 8;
  const int min_args = min_args_base + 1;
#else
  const int min_args = min_args_base;
#endif  // CONFIG_VP9_HIGHBITDEPTH
  double sum_bitrate = 0.0;
  double sum_bitrate2 = 0.0;
  double framerate  = 30.0;

  exec_name = argv[0];
  // Check usage and arguments.
  if (argc < min_args) {
#if CONFIG_VP9_HIGHBITDEPTH
    die("Usage: %s <infile> <outfile> <codec_type(vp8/vp9)> <width> <height> "
        "<rate_num> <rate_den> <speed> <frame_drop_threshold> <mode> "
        "<Rate_0> ... <Rate_nlayers-1> <bit-depth> \n", argv[0]);
#else
    die("Usage: %s <infile> <outfile> <codec_type(vp8/vp9)> <width> <height> "
        "<rate_num> <rate_den> <speed> <frame_drop_threshold> <mode> "
        "<Rate_0> ... <Rate_nlayers-1> \n", argv[0]);
#endif  // CONFIG_VP9_HIGHBITDEPTH
  }

  encoder = get_vpx_encoder_by_name(argv[3]);
  if (!encoder)
    die("Unsupported codec.");

  printf("Using %s\n", vpx_codec_iface_name(encoder->codec_interface()));

  width = strtol(argv[4], NULL, 0);
  height = strtol(argv[5], NULL, 0);
  if (width < 16 || width % 2 || height < 16 || height % 2) {
    die("Invalid resolution: %d x %d", width, height);
  }

  layering_mode = strtol(argv[10], NULL, 0);
  if (layering_mode < 0 || layering_mode > 12) {
    die("Invalid layering mode (0..12) %s", argv[10]);
  }

  if (argc != min_args + mode_to_num_layers[layering_mode]) {
    die("Invalid number of arguments");
  }

#if CONFIG_VP9_HIGHBITDEPTH
  switch (strtol(argv[argc-1], NULL, 0)) {
    case 8:
      bit_depth = VPX_BITS_8;
      input_bit_depth = 8;
      break;
    case 10:
      bit_depth = VPX_BITS_10;
      input_bit_depth = 10;
      break;
    case 12:
      bit_depth = VPX_BITS_12;
      input_bit_depth = 12;
      break;
    default:
      die("Invalid bit depth (8, 10, 12) %s", argv[argc-1]);
  }
  if (!vpx_img_alloc(&raw,
                     bit_depth == VPX_BITS_8 ? VPX_IMG_FMT_I420 :
                                               VPX_IMG_FMT_I42016,
                     width, height, 32)) {
    die("Failed to allocate image", width, height);
  }
#else
  if (!vpx_img_alloc(&raw, VPX_IMG_FMT_I420, width, height, 32)) {
    die("Failed to allocate image", width, height);
  }
#endif  // CONFIG_VP9_HIGHBITDEPTH

  // Populate encoder configuration.
  res = vpx_codec_enc_config_default(encoder->codec_interface(), &cfg, 0);
  if (res) {
    printf("Failed to get config: %s\n", vpx_codec_err_to_string(res));
    return EXIT_FAILURE;
  }

  // Update the default configuration with our settings.
  cfg.g_w = width;
  cfg.g_h = height;

#if CONFIG_VP9_HIGHBITDEPTH
  if (bit_depth != VPX_BITS_8) {
    cfg.g_bit_depth = bit_depth;
    cfg.g_input_bit_depth = input_bit_depth;
    cfg.g_profile = 2;
  }
#endif  // CONFIG_VP9_HIGHBITDEPTH

  // Timebase format e.g. 30fps: numerator=1, demoninator = 30.
  cfg.g_timebase.num = strtol(argv[6], NULL, 0);
  cfg.g_timebase.den = strtol(argv[7], NULL, 0);

  speed = strtol(argv[8], NULL, 0);
  if (speed < 0) {
    die("Invalid speed setting: must be positive");
  }

  for (i = min_args_base;
       (int)i < min_args_base + mode_to_num_layers[layering_mode];
       ++i) {
    rc.layer_target_bitrate[i - 11] = strtol(argv[i], NULL, 0);
    if (strncmp(encoder->name, "vp8", 3) == 0)
      cfg.ts_target_bitrate[i - 11] = rc.layer_target_bitrate[i - 11];
    else if (strncmp(encoder->name, "vp9", 3) == 0)
      cfg.layer_target_bitrate[i - 11] = rc.layer_target_bitrate[i - 11];
  }

  // Real time parameters.
  cfg.rc_dropframe_thresh = strtol(argv[9], NULL, 0);
  cfg.rc_end_usage = VPX_CBR;
  cfg.rc_min_quantizer = 2;
  cfg.rc_max_quantizer = 56;
  if (strncmp(encoder->name, "vp9", 3) == 0)
    cfg.rc_max_quantizer = 52;
  cfg.rc_undershoot_pct = 50;
  cfg.rc_overshoot_pct = 50;
  cfg.rc_buf_initial_sz = 500;
  cfg.rc_buf_optimal_sz = 600;
  cfg.rc_buf_sz = 1000;

  // Disable dynamic resizing by default.
  cfg.rc_resize_allowed = 0;

  // Use 1 thread as default.
  cfg.g_threads = 1;

  // Enable error resilient mode.
  cfg.g_error_resilient = 1;
  cfg.g_lag_in_frames   = 0;
  cfg.kf_mode = VPX_KF_AUTO;

  // Disable automatic keyframe placement.
  cfg.kf_min_dist = cfg.kf_max_dist = 3000;

  cfg.temporal_layering_mode = VP9E_TEMPORAL_LAYERING_MODE_BYPASS;

  set_temporal_layer_pattern(layering_mode,
                             &cfg,
                             layer_flags,
                             &flag_periodicity);

  set_rate_control_metrics(&rc, &cfg);

  // Target bandwidth for the whole stream.
  // Set to layer_target_bitrate for highest layer (total bitrate).
  cfg.rc_target_bitrate = rc.layer_target_bitrate[cfg.ts_number_layers - 1];

  // Open input file.
  if (!(infile = fopen(argv[1], "rb"))) {
    die("Failed to open %s for reading", argv[1]);
  }

  framerate = cfg.g_timebase.den / cfg.g_timebase.num;
  // Open an output file for each stream.
  for (i = 0; i < cfg.ts_number_layers; ++i) {
    char file_name[PATH_MAX];
    VpxVideoInfo info;
    info.codec_fourcc = encoder->fourcc;
    info.frame_width = cfg.g_w;
    info.frame_height = cfg.g_h;
    info.time_base.numerator = cfg.g_timebase.num;
    info.time_base.denominator = cfg.g_timebase.den;

    snprintf(file_name, sizeof(file_name), "%s_%d.ivf", argv[2], i);
    outfile[i] = vpx_video_writer_open(file_name, kContainerIVF, &info);
    if (!outfile[i])
      die("Failed to open %s for writing", file_name);

    assert(outfile[i] != NULL);
  }
  // No spatial layers in this encoder.
  cfg.ss_number_layers = 1;

  // Initialize codec.
#if CONFIG_VP9_HIGHBITDEPTH
  if (vpx_codec_enc_init(
          &codec, encoder->codec_interface(), &cfg,
          bit_depth == VPX_BITS_8 ? 0 : VPX_CODEC_USE_HIGHBITDEPTH))
#else
  if (vpx_codec_enc_init(&codec, encoder->codec_interface(), &cfg, 0))
#endif  // CONFIG_VP9_HIGHBITDEPTH
    die_codec(&codec, "Failed to initialize encoder");

  // configuration for vp8/vp9
  if (strncmp(encoder->name, "vp8", 3) == 0) {
    vpx_codec_control(&codec, VP8E_SET_CPUUSED, -speed);
    vpx_codec_control(&codec, VP8E_SET_NOISE_SENSITIVITY, kDenoiserOff);
    vpx_codec_control(&codec, VP8E_SET_STATIC_THRESHOLD, 0);
  } else if (strncmp(encoder->name, "vp9", 3) == 0) {
    vpx_svc_extra_cfg_t svc_params;
    vpx_codec_control(&codec, VP8E_SET_CPUUSED, speed);
    vpx_codec_control(&codec, VP9E_SET_AQ_MODE, 3);
    vpx_codec_control(&codec, VP9E_SET_FRAME_PERIODIC_BOOST, 0);
    vpx_codec_control(&codec, VP9E_SET_NOISE_SENSITIVITY, 0);
    vpx_codec_control(&codec, VP8E_SET_STATIC_THRESHOLD, 0);
    vpx_codec_control(&codec, VP9E_SET_TUNE_CONTENT, 0);
    vpx_codec_control(&codec, VP9E_SET_TILE_COLUMNS, (cfg.g_threads >> 1));
    if (vpx_codec_control(&codec, VP9E_SET_SVC, layering_mode > 0 ? 1: 0))
      die_codec(&codec, "Failed to set SVC");
    for (i = 0; i < cfg.ts_number_layers; ++i) {
      svc_params.max_quantizers[i] = cfg.rc_max_quantizer;
      svc_params.min_quantizers[i] = cfg.rc_min_quantizer;
    }
    svc_params.scaling_factor_num[0] = cfg.g_h;
    svc_params.scaling_factor_den[0] = cfg.g_h;
    vpx_codec_control(&codec, VP9E_SET_SVC_PARAMETERS, &svc_params);
  }
Ejemplo n.º 3
0
int main(int argc, char **argv) {
  FILE *infile = NULL;
  vpx_codec_ctx_t codec;
  vpx_codec_enc_cfg_t cfg;
  int frame_count = 0;
  vpx_image_t raw;
  vpx_codec_err_t res;
  VpxVideoInfo info;
  VpxVideoWriter *writer = NULL;
  const VpxInterface *encoder = NULL;
  const int fps = 2;        // TODO(dkovalev) add command line argument
  const double bits_per_pixel_per_frame = 0.067;

  exec_name = argv[0];
  if (argc != 6)
    die("Invalid number of arguments");

  memset(&info, 0, sizeof(info));

  encoder = get_vpx_encoder_by_name(argv[1]);
  if (encoder == NULL) {
    die("Unsupported codec.");
  }
  assert(encoder != NULL);
  info.codec_fourcc = encoder->fourcc;
  info.frame_width = strtol(argv[2], NULL, 0);
  info.frame_height = strtol(argv[3], NULL, 0);
  info.time_base.numerator = 1;
  info.time_base.denominator = fps;

  if (info.frame_width <= 0 ||
      info.frame_height <= 0 ||
      (info.frame_width % 2) != 0 ||
      (info.frame_height % 2) != 0) {
    die("Invalid frame size: %dx%d", info.frame_width, info.frame_height);
  }

  if (!vpx_img_alloc(&raw, VPX_IMG_FMT_I420, info.frame_width,
                                             info.frame_height, 1)) {
    die("Failed to allocate image.");
  }

  printf("Using %s\n", vpx_codec_iface_name(encoder->codec_interface()));

  res = vpx_codec_enc_config_default(encoder->codec_interface(), &cfg, 0);
  if (res)
    die_codec(&codec, "Failed to get default codec config.");

  cfg.g_w = info.frame_width;
  cfg.g_h = info.frame_height;
  cfg.g_timebase.num = info.time_base.numerator;
  cfg.g_timebase.den = info.time_base.denominator;
  cfg.rc_target_bitrate = (unsigned int)(bits_per_pixel_per_frame * cfg.g_w *
                                         cfg.g_h * fps / 1000);
  cfg.g_lag_in_frames = 0;

  writer = vpx_video_writer_open(argv[5], kContainerIVF, &info);
  if (!writer)
    die("Failed to open %s for writing.", argv[5]);

  if (!(infile = fopen(argv[4], "rb")))
    die("Failed to open %s for reading.", argv[4]);

  if (vpx_codec_enc_init(&codec, encoder->codec_interface(), &cfg, 0))
    die_codec(&codec, "Failed to initialize encoder");

  // Encode frames.
  while (vpx_img_read(&raw, infile)) {
    ++frame_count;

    if (frame_count == 22 && encoder->fourcc == VP8_FOURCC) {
      set_roi_map(&cfg, &codec);
    } else if (frame_count == 33) {
      set_active_map(&cfg, &codec);
    } else if (frame_count == 44) {
      unset_active_map(&cfg, &codec);
    }

    encode_frame(&codec, &raw, frame_count, writer);
  }

  // Flush encoder.
  while (encode_frame(&codec, NULL, -1, writer)) {}

  printf("\n");
  fclose(infile);
  printf("Processed %d frames.\n", frame_count);

  vpx_img_free(&raw);
  if (vpx_codec_destroy(&codec))
    die_codec(&codec, "Failed to destroy codec.");

  vpx_video_writer_close(writer);

  return EXIT_SUCCESS;
}
Ejemplo n.º 4
0
// TODO(tomfinegan): Improve command line parsing and add args for bitrate/fps.
int main(int argc, char **argv) {
  FILE *infile = NULL;
  vpx_codec_ctx_t codec;
  vpx_codec_enc_cfg_t cfg;
  int frame_count = 0;
  vpx_image_t raw;
  vpx_codec_err_t res;
  VpxVideoInfo info = { 0, 0, 0, { 0, 0 } };
  VpxVideoWriter *writer = NULL;
  const VpxInterface *encoder = NULL;
  const int fps = 30;
  const int bitrate = 200;
  int keyframe_interval = 0;
  int max_frames = 0;
  int frames_encoded = 0;
  const char *codec_arg = NULL;
  const char *width_arg = NULL;
  const char *height_arg = NULL;
  const char *infile_arg = NULL;
  const char *outfile_arg = NULL;
  const char *keyframe_interval_arg = NULL;

  exec_name = argv[0];

  if (argc != 9) die("Invalid number of arguments");

  codec_arg = argv[1];
  width_arg = argv[2];
  height_arg = argv[3];
  infile_arg = argv[4];
  outfile_arg = argv[5];
  keyframe_interval_arg = argv[6];
  max_frames = (int)strtol(argv[8], NULL, 0);

  encoder = get_vpx_encoder_by_name(codec_arg);
  if (!encoder) die("Unsupported codec.");

  info.codec_fourcc = encoder->fourcc;
  info.frame_width = (int)strtol(width_arg, NULL, 0);
  info.frame_height = (int)strtol(height_arg, NULL, 0);
  info.time_base.numerator = 1;
  info.time_base.denominator = fps;

  if (info.frame_width <= 0 || info.frame_height <= 0 ||
      (info.frame_width % 2) != 0 || (info.frame_height % 2) != 0) {
    die("Invalid frame size: %dx%d", info.frame_width, info.frame_height);
  }

  if (!vpx_img_alloc(&raw, VPX_IMG_FMT_I420, info.frame_width,
                     info.frame_height, 1)) {
    die("Failed to allocate image.");
  }

  keyframe_interval = (int)strtol(keyframe_interval_arg, NULL, 0);
  if (keyframe_interval < 0) die("Invalid keyframe interval value.");

  printf("Using %s\n", vpx_codec_iface_name(encoder->codec_interface()));

  res = vpx_codec_enc_config_default(encoder->codec_interface(), &cfg, 0);
  if (res) die_codec(&codec, "Failed to get default codec config.");

  cfg.g_w = info.frame_width;
  cfg.g_h = info.frame_height;
  cfg.g_timebase.num = info.time_base.numerator;
  cfg.g_timebase.den = info.time_base.denominator;
  cfg.rc_target_bitrate = bitrate;
  cfg.g_error_resilient = (vpx_codec_er_flags_t)strtoul(argv[7], NULL, 0);

  writer = vpx_video_writer_open(outfile_arg, kContainerIVF, &info);
  if (!writer) die("Failed to open %s for writing.", outfile_arg);

  if (!(infile = fopen(infile_arg, "rb")))
    die("Failed to open %s for reading.", infile_arg);

  if (vpx_codec_enc_init(&codec, encoder->codec_interface(), &cfg, 0))
    die_codec(&codec, "Failed to initialize encoder");

  // Encode frames.
  while (vpx_img_read(&raw, infile)) {
    int flags = 0;
    if (keyframe_interval > 0 && frame_count % keyframe_interval == 0)
      flags |= VPX_EFLAG_FORCE_KF;
    encode_frame(&codec, &raw, frame_count++, flags, writer);
    frames_encoded++;
    if (max_frames > 0 && frames_encoded >= max_frames) break;
  }

  // Flush encoder.
  while (encode_frame(&codec, NULL, -1, 0, writer)) {
  }

  printf("\n");
  fclose(infile);
  printf("Processed %d frames.\n", frame_count);

  vpx_img_free(&raw);
  if (vpx_codec_destroy(&codec)) die_codec(&codec, "Failed to destroy codec.");

  vpx_video_writer_close(writer);

  return EXIT_SUCCESS;
}
Ejemplo n.º 5
0
int main(int argc, char **argv) {
  FILE *infile = NULL;
  // Encoder
  vpx_codec_ctx_t ecodec = {0};
  vpx_codec_enc_cfg_t cfg = {0};
  unsigned int frame_in = 0;
  vpx_image_t raw;
  vpx_codec_err_t res;
  VpxVideoInfo info = {0};
  VpxVideoWriter *writer = NULL;
  const VpxInterface *encoder = NULL;

  // Test encoder/decoder mismatch.
  int test_decode = 1;
  // Decoder
  vpx_codec_ctx_t dcodec;
  unsigned int frame_out = 0;

  // The frame number to set reference frame on
  unsigned int update_frame_num = 0;
  int mismatch_seen = 0;

  const int fps = 30;
  const int bitrate = 500;

  const char *width_arg = NULL;
  const char *height_arg = NULL;
  const char *infile_arg = NULL;
  const char *outfile_arg = NULL;
  unsigned int limit = 0;
  exec_name = argv[0];

  if (argc < 6)
    die("Invalid number of arguments");

  width_arg = argv[1];
  height_arg = argv[2];
  infile_arg = argv[3];
  outfile_arg = argv[4];

  encoder = get_vpx_encoder_by_name("vp9");
  if (!encoder)
    die("Unsupported codec.");

  update_frame_num = atoi(argv[5]);
  // In VP9, the reference buffers (cm->buffer_pool->frame_bufs[i].buf) are
  // allocated while calling vpx_codec_encode(), thus, setting reference for
  // 1st frame isn't supported.
  if (update_frame_num <= 1)
    die("Couldn't parse frame number '%s'\n", argv[5]);

  if (argc > 6) {
    limit = atoi(argv[6]);
    if (update_frame_num > limit)
      die("Update frame number couldn't larger than limit\n");
  }

  info.codec_fourcc = encoder->fourcc;
  info.frame_width = strtol(width_arg, NULL, 0);
  info.frame_height = strtol(height_arg, NULL, 0);
  info.time_base.numerator = 1;
  info.time_base.denominator = fps;

  if (info.frame_width <= 0 ||
      info.frame_height <= 0 ||
      (info.frame_width % 2) != 0 ||
      (info.frame_height % 2) != 0) {
    die("Invalid frame size: %dx%d", info.frame_width, info.frame_height);
  }

  if (!vpx_img_alloc(&raw, VPX_IMG_FMT_I420, info.frame_width,
                                             info.frame_height, 1)) {
    die("Failed to allocate image.");
  }

  printf("Using %s\n", vpx_codec_iface_name(encoder->codec_interface()));

  res = vpx_codec_enc_config_default(encoder->codec_interface(), &cfg, 0);
  if (res)
    die_codec(&ecodec, "Failed to get default codec config.");

  cfg.g_w = info.frame_width;
  cfg.g_h = info.frame_height;
  cfg.g_timebase.num = info.time_base.numerator;
  cfg.g_timebase.den = info.time_base.denominator;
  cfg.rc_target_bitrate = bitrate;
  cfg.g_lag_in_frames = 3;

  writer = vpx_video_writer_open(outfile_arg, kContainerIVF, &info);
  if (!writer)
    die("Failed to open %s for writing.", outfile_arg);

  if (!(infile = fopen(infile_arg, "rb")))
    die("Failed to open %s for reading.", infile_arg);

  if (vpx_codec_enc_init(&ecodec, encoder->codec_interface(), &cfg, 0))
    die_codec(&ecodec, "Failed to initialize encoder");

  // Disable alt_ref.
  if (vpx_codec_control(&ecodec, VP8E_SET_ENABLEAUTOALTREF, 0))
    die_codec(&ecodec, "Failed to set enable auto alt ref");

  if (test_decode) {
      const VpxInterface *decoder = get_vpx_decoder_by_name("vp9");
      if (vpx_codec_dec_init(&dcodec, decoder->codec_interface(), NULL, 0))
        die_codec(&dcodec, "Failed to initialize decoder.");
  }

  // Encode frames.
  while (vpx_img_read(&raw, infile)) {
    if (limit && frame_in >= limit)
      break;
    if (update_frame_num > 1 && frame_out + 1 == update_frame_num) {
      vpx_ref_frame_t ref;
      ref.frame_type = VP8_LAST_FRAME;
      ref.img = raw;
      // Set reference frame in encoder.
      if (vpx_codec_control(&ecodec, VP8_SET_REFERENCE, &ref))
        die_codec(&ecodec, "Failed to set reference frame");
      printf(" <SET_REF>");

      // If set_reference in decoder is commented out, the enc/dec mismatch
      // would be seen.
      if (test_decode) {
        if (vpx_codec_control(&dcodec, VP8_SET_REFERENCE, &ref))
          die_codec(&dcodec, "Failed to set reference frame");
      }
    }

    encode_frame(&ecodec, &cfg, &raw, frame_in, writer, test_decode,
                 &dcodec, &frame_out, &mismatch_seen);
    frame_in++;
    if (mismatch_seen)
      break;
  }

  // Flush encoder.
  if (!mismatch_seen)
    while (encode_frame(&ecodec, &cfg, NULL, frame_in, writer, test_decode,
                        &dcodec, &frame_out, &mismatch_seen)) {}

  printf("\n");
  fclose(infile);
  printf("Processed %d frames.\n", frame_out);

  if (test_decode) {
    if (!mismatch_seen)
      printf("Encoder/decoder results are matching.\n");
    else
      printf("Encoder/decoder results are NOT matching.\n");
  }

  if (test_decode)
    if (vpx_codec_destroy(&dcodec))
      die_codec(&dcodec, "Failed to destroy decoder");

  vpx_img_free(&raw);
  if (vpx_codec_destroy(&ecodec))
    die_codec(&ecodec, "Failed to destroy encoder.");

  vpx_video_writer_close(writer);

  return EXIT_SUCCESS;
}
Ejemplo n.º 6
0
int main(int argc, char **argv) {
  VpxVideoWriter *outfile[VPX_TS_MAX_LAYERS] = {NULL};
  vpx_codec_ctx_t codec;
  vpx_codec_enc_cfg_t cfg;
  int frame_cnt = 0;
  vpx_image_t raw;
  vpx_codec_err_t res;
  unsigned int width;
  unsigned int height;
  int speed;
  int frame_avail;
  int got_data;
  int flags = 0;
  unsigned int i;
  int pts = 0;  // PTS starts at 0.
  int frame_duration = 1;  // 1 timebase tick per frame.
  int layering_mode = 0;
  int layer_flags[VPX_TS_MAX_PERIODICITY] = {0};
  int flag_periodicity = 1;
  vpx_svc_layer_id_t layer_id = {0, 0};
  const VpxInterface *encoder = NULL;
  FILE *infile = NULL;
  struct RateControlMetrics rc;
  int64_t cx_time = 0;
  const int min_args_base = 11;
#if CONFIG_VP9_HIGHBITDEPTH
  vpx_bit_depth_t bit_depth = VPX_BITS_8;
  int input_bit_depth = 8;
  const int min_args = min_args_base + 1;
#else
  const int min_args = min_args_base;
#endif  // CONFIG_VP9_HIGHBITDEPTH
  double sum_bitrate = 0.0;
  double sum_bitrate2 = 0.0;
  double framerate  = 30.0;

  exec_name = argv[0];
  // Check usage and arguments.
  if (argc < min_args) {
#if CONFIG_VP9_HIGHBITDEPTH
    die("Usage: %s <infile> <outfile> <codec_type(vp8/vp9)> <width> <height> "
        "<rate_num> <rate_den> <speed> <frame_drop_threshold> <mode> "
        "<Rate_0> ... <Rate_nlayers-1> <bit-depth> \n", argv[0]);
#else
    die("Usage: %s <infile> <outfile> <codec_type(vp8/vp9)> <width> <height> "
        "<rate_num> <rate_den> <speed> <frame_drop_threshold> <mode> "
        "<Rate_0> ... <Rate_nlayers-1> \n", argv[0]);
#endif  // CONFIG_VP9_HIGHBITDEPTH
  }

  encoder = get_vpx_encoder_by_name(argv[3]);
  if (!encoder)
    die("Unsupported codec.");

  printf("Using %s\n", vpx_codec_iface_name(encoder->codec_interface()));

  width = strtol(argv[4], NULL, 0);
  height = strtol(argv[5], NULL, 0);
  if (width < 16 || width % 2 || height < 16 || height % 2) {
    die("Invalid resolution: %d x %d", width, height);
  }

  layering_mode = strtol(argv[10], NULL, 0);
  if (layering_mode < 0 || layering_mode > 12) {
    die("Invalid layering mode (0..12) %s", argv[10]);
  }

  if (argc != min_args + mode_to_num_layers[layering_mode]) {
    die("Invalid number of arguments");
  }

#if CONFIG_VP9_HIGHBITDEPTH
  switch (strtol(argv[argc-1], NULL, 0)) {
    case 8:
      bit_depth = VPX_BITS_8;
      input_bit_depth = 8;
      break;
    case 10:
      bit_depth = VPX_BITS_10;
      input_bit_depth = 10;
      break;
    case 12:
      bit_depth = VPX_BITS_12;
      input_bit_depth = 12;
      break;
    default:
      die("Invalid bit depth (8, 10, 12) %s", argv[argc-1]);
  }
  if (!vpx_img_alloc(&raw,
                     bit_depth == VPX_BITS_8 ? VPX_IMG_FMT_I420 :
                                               VPX_IMG_FMT_I42016,
                     width, height, 32)) {
    die("Failed to allocate image", width, height);
  }
#else
  if (!vpx_img_alloc(&raw, VPX_IMG_FMT_I420, width, height, 32)) {
    die("Failed to allocate image", width, height);
  }
#endif  // CONFIG_VP9_HIGHBITDEPTH

  // Populate encoder configuration.
  res = vpx_codec_enc_config_default(encoder->codec_interface(), &cfg, 0);
  if (res) {
    printf("Failed to get config: %s\n", vpx_codec_err_to_string(res));
    return EXIT_FAILURE;
  }

  // Update the default configuration with our settings.
  cfg.g_w = width;
  cfg.g_h = height;

#if CONFIG_VP9_HIGHBITDEPTH
  if (bit_depth != VPX_BITS_8) {
    cfg.g_bit_depth = bit_depth;
    cfg.g_input_bit_depth = input_bit_depth;
    cfg.g_profile = 2;
  }
#endif  // CONFIG_VP9_HIGHBITDEPTH

  // Timebase format e.g. 30fps: numerator=1, demoninator = 30.
  cfg.g_timebase.num = strtol(argv[6], NULL, 0);
  cfg.g_timebase.den = strtol(argv[7], NULL, 0);

  speed = strtol(argv[8], NULL, 0);
  if (speed < 0) {
    die("Invalid speed setting: must be positive");
  }

  for (i = min_args_base;
       (int)i < min_args_base + mode_to_num_layers[layering_mode];
       ++i) {
    cfg.ts_target_bitrate[i - 11] = strtol(argv[i], NULL, 0);
  }

  // Real time parameters.
  cfg.rc_dropframe_thresh = strtol(argv[9], NULL, 0);
  cfg.rc_end_usage = VPX_CBR;
  cfg.rc_resize_allowed = 0;
  cfg.rc_min_quantizer = 2;
  cfg.rc_max_quantizer = 56;
  cfg.rc_undershoot_pct = 50;
  cfg.rc_overshoot_pct = 50;
  cfg.rc_buf_initial_sz = 500;
  cfg.rc_buf_optimal_sz = 600;
  cfg.rc_buf_sz = 1000;

  // Enable error resilient mode.
  cfg.g_error_resilient = 1;
  cfg.g_lag_in_frames   = 0;
  cfg.kf_mode = VPX_KF_AUTO;

  // Disable automatic keyframe placement.
  cfg.kf_min_dist = cfg.kf_max_dist = 3000;

  set_temporal_layer_pattern(layering_mode,
                             &cfg,
                             layer_flags,
                             &flag_periodicity);

  set_rate_control_metrics(&rc, &cfg);

  // Target bandwidth for the whole stream.
  // Set to ts_target_bitrate for highest layer (total bitrate).
  cfg.rc_target_bitrate = cfg.ts_target_bitrate[cfg.ts_number_layers - 1];

  // Open input file.
  if (!(infile = fopen(argv[1], "rb"))) {
    die("Failed to open %s for reading", argv[1]);
  }

  framerate = cfg.g_timebase.den / cfg.g_timebase.num;
  // Open an output file for each stream.
  for (i = 0; i < cfg.ts_number_layers; ++i) {
    char file_name[PATH_MAX];
    VpxVideoInfo info;
    info.codec_fourcc = encoder->fourcc;
    info.frame_width = cfg.g_w;
    info.frame_height = cfg.g_h;
    info.time_base.numerator = cfg.g_timebase.num;
    info.time_base.denominator = cfg.g_timebase.den;

    snprintf(file_name, sizeof(file_name), "%s_%d.ivf", argv[2], i);
    outfile[i] = vpx_video_writer_open(file_name, kContainerIVF, &info);
    if (!outfile[i])
      die("Failed to open %s for writing", file_name);

    assert(outfile[i] != NULL);
  }
  // No spatial layers in this encoder.
  cfg.ss_number_layers = 1;

  // Initialize codec.
#if CONFIG_VP9_HIGHBITDEPTH
  if (vpx_codec_enc_init(
          &codec, encoder->codec_interface(), &cfg,
          bit_depth == VPX_BITS_8 ? 0 : VPX_CODEC_USE_HIGHBITDEPTH))
#else
  if (vpx_codec_enc_init(&codec, encoder->codec_interface(), &cfg, 0))
#endif  // CONFIG_VP9_HIGHBITDEPTH
    die_codec(&codec, "Failed to initialize encoder");

  if (strncmp(encoder->name, "vp8", 3) == 0) {
    vpx_codec_control(&codec, VP8E_SET_CPUUSED, -speed);
    vpx_codec_control(&codec, VP8E_SET_NOISE_SENSITIVITY, kDenoiserOnYOnly);
  } else if (strncmp(encoder->name, "vp9", 3) == 0) {
      vpx_codec_control(&codec, VP8E_SET_CPUUSED, speed);
      vpx_codec_control(&codec, VP9E_SET_AQ_MODE, 3);
      vpx_codec_control(&codec, VP9E_SET_FRAME_PERIODIC_BOOST, 0);
      vpx_codec_control(&codec, VP9E_SET_NOISE_SENSITIVITY, 0);
      if (vpx_codec_control(&codec, VP9E_SET_SVC, layering_mode > 0 ? 1: 0)) {
        die_codec(&codec, "Failed to set SVC");
    }
  }
  vpx_codec_control(&codec, VP8E_SET_STATIC_THRESHOLD, 1);
  vpx_codec_control(&codec, VP8E_SET_TOKEN_PARTITIONS, 1);
  // This controls the maximum target size of the key frame.
  // For generating smaller key frames, use a smaller max_intra_size_pct
  // value, like 100 or 200.
  {
    const int max_intra_size_pct = 900;
    vpx_codec_control(&codec, VP8E_SET_MAX_INTRA_BITRATE_PCT,
                      max_intra_size_pct);
  }

  frame_avail = 1;
  while (frame_avail || got_data) {
    struct vpx_usec_timer timer;
    vpx_codec_iter_t iter = NULL;
    const vpx_codec_cx_pkt_t *pkt;
    // Update the temporal layer_id. No spatial layers in this test.
    layer_id.spatial_layer_id = 0;
    layer_id.temporal_layer_id =
        cfg.ts_layer_id[frame_cnt % cfg.ts_periodicity];
    if (strncmp(encoder->name, "vp9", 3) == 0) {
      vpx_codec_control(&codec, VP9E_SET_SVC_LAYER_ID, &layer_id);
    }
    flags = layer_flags[frame_cnt % flag_periodicity];
    frame_avail = vpx_img_read(&raw, infile);
    if (frame_avail)
      ++rc.layer_input_frames[layer_id.temporal_layer_id];
    vpx_usec_timer_start(&timer);
    if (vpx_codec_encode(&codec, frame_avail? &raw : NULL, pts, 1, flags,
        VPX_DL_REALTIME)) {
      die_codec(&codec, "Failed to encode frame");
    }
    vpx_usec_timer_mark(&timer);
    cx_time += vpx_usec_timer_elapsed(&timer);
    // Reset KF flag.
    if (layering_mode != 7) {
      layer_flags[0] &= ~VPX_EFLAG_FORCE_KF;
    }
    got_data = 0;
    while ( (pkt = vpx_codec_get_cx_data(&codec, &iter)) ) {
      got_data = 1;
      switch (pkt->kind) {
        case VPX_CODEC_CX_FRAME_PKT:
          for (i = cfg.ts_layer_id[frame_cnt % cfg.ts_periodicity];
              i < cfg.ts_number_layers; ++i) {
            vpx_video_writer_write_frame(outfile[i], pkt->data.frame.buf,
                                         pkt->data.frame.sz, pts);
            ++rc.layer_tot_enc_frames[i];
            rc.layer_encoding_bitrate[i] += 8.0 * pkt->data.frame.sz;
            // Keep count of rate control stats per layer (for non-key frames).
            if (i == cfg.ts_layer_id[frame_cnt % cfg.ts_periodicity] &&
                !(pkt->data.frame.flags & VPX_FRAME_IS_KEY)) {
              rc.layer_avg_frame_size[i] += 8.0 * pkt->data.frame.sz;
              rc.layer_avg_rate_mismatch[i] +=
                  fabs(8.0 * pkt->data.frame.sz - rc.layer_pfb[i]) /
                  rc.layer_pfb[i];
              ++rc.layer_enc_frames[i];
            }
          }
          // Update for short-time encoding bitrate states, for moving window
          // of size rc->window, shifted by rc->window / 2.
          // Ignore first window segment, due to key frame.
          if (frame_cnt > rc.window_size) {
            sum_bitrate += 0.001 * 8.0 * pkt->data.frame.sz * framerate;
            if (frame_cnt % rc.window_size == 0) {
              rc.window_count += 1;
              rc.avg_st_encoding_bitrate += sum_bitrate / rc.window_size;
              rc.variance_st_encoding_bitrate +=
                  (sum_bitrate / rc.window_size) *
                  (sum_bitrate / rc.window_size);
              sum_bitrate = 0.0;
            }
          }
          // Second shifted window.
          if (frame_cnt > rc.window_size + rc.window_size / 2) {
            sum_bitrate2 += 0.001 * 8.0 * pkt->data.frame.sz * framerate;
            if (frame_cnt > 2 * rc.window_size &&
                frame_cnt % rc.window_size == 0) {
              rc.window_count += 1;
              rc.avg_st_encoding_bitrate += sum_bitrate2 / rc.window_size;
              rc.variance_st_encoding_bitrate +=
                  (sum_bitrate2 / rc.window_size) *
                  (sum_bitrate2 / rc.window_size);
              sum_bitrate2 = 0.0;
            }
          }
          break;
          default:
            break;
      }
    }
    ++frame_cnt;
    pts += frame_duration;
  }
  fclose(infile);
  printout_rate_control_summary(&rc, &cfg, frame_cnt);
  printf("\n");
  printf("Frame cnt and encoding time/FPS stats for encoding: %d %f %f \n",
          frame_cnt,
          1000 * (float)cx_time / (double)(frame_cnt * 1000000),
          1000000 * (double)frame_cnt / (double)cx_time);

  if (vpx_codec_destroy(&codec))
    die_codec(&codec, "Failed to destroy codec");

  // Try to rewrite the output file headers with the actual frame count.
  for (i = 0; i < cfg.ts_number_layers; ++i)
    vpx_video_writer_close(outfile[i]);

  vpx_img_free(&raw);
  return EXIT_SUCCESS;
}
int main(int argc, const char **argv) {
  AppInput app_input = {0};
  VpxVideoWriter *writer = NULL;
  VpxVideoInfo info = {0};
  vpx_codec_ctx_t codec;
  vpx_codec_enc_cfg_t enc_cfg;
  SvcContext svc_ctx;
  uint32_t i;
  uint32_t frame_cnt = 0;
  vpx_image_t raw;
  vpx_codec_err_t res;
  int pts = 0;            /* PTS starts at 0 */
  int frame_duration = 1; /* 1 timebase tick per frame */
  FILE *infile = NULL;

  memset(&svc_ctx, 0, sizeof(svc_ctx));
  svc_ctx.log_print = 1;
  exec_name = argv[0];
  parse_command_line(argc, argv, &app_input, &svc_ctx, &enc_cfg);

  // Allocate image buffer
  if (!vpx_img_alloc(&raw, VPX_IMG_FMT_I420, enc_cfg.g_w, enc_cfg.g_h, 32))
    die("Failed to allocate image %dx%d\n", enc_cfg.g_w, enc_cfg.g_h);

  if (!(infile = fopen(app_input.input_filename, "rb")))
    die("Failed to open %s for reading\n", app_input.input_filename);

  // Initialize codec
  if (vpx_svc_init(&svc_ctx, &codec, vpx_codec_vp9_cx(), &enc_cfg) !=
      VPX_CODEC_OK)
    die("Failed to initialize encoder\n");

  info.codec_fourcc = VP9_FOURCC;
  info.time_base.numerator = enc_cfg.g_timebase.num;
  info.time_base.denominator = enc_cfg.g_timebase.den;
  if (vpx_svc_get_layer_resolution(&svc_ctx, svc_ctx.spatial_layers - 1,
                                   (unsigned int *)&info.frame_width,
                                   (unsigned int *)&info.frame_height) !=
      VPX_CODEC_OK) {
    die("Failed to get output resolution");
  }
  writer = vpx_video_writer_open(app_input.output_filename, kContainerIVF,
                                 &info);
  if (!writer)
    die("Failed to open %s for writing\n", app_input.output_filename);

  // skip initial frames
  for (i = 0; i < app_input.frames_to_skip; ++i)
    vpx_img_read(&raw, infile);

  // Encode frames
  while (frame_cnt < app_input.frames_to_code) {
    if (!vpx_img_read(&raw, infile))
      break;

    res = vpx_svc_encode(&svc_ctx, &codec, &raw, pts, frame_duration,
                         VPX_DL_REALTIME);
    printf("%s", vpx_svc_get_message(&svc_ctx));
    if (res != VPX_CODEC_OK) {
      die_codec(&codec, "Failed to encode frame");
    }
    if (vpx_svc_get_frame_size(&svc_ctx) > 0) {
      vpx_video_writer_write_frame(writer,
                                   vpx_svc_get_buffer(&svc_ctx),
                                   vpx_svc_get_frame_size(&svc_ctx),
                                   pts);
    }
    ++frame_cnt;
    pts += frame_duration;
  }

  printf("Processed %d frames\n", frame_cnt);

  fclose(infile);
  if (vpx_codec_destroy(&codec)) die_codec(&codec, "Failed to destroy codec");

  vpx_video_writer_close(writer);

  vpx_img_free(&raw);

  // display average size, psnr
  printf("%s", vpx_svc_dump_statistics(&svc_ctx));

  vpx_svc_release(&svc_ctx);

  return EXIT_SUCCESS;
}
int main(int argc, const char **argv) {
  AppInput app_input = {0};
  VpxVideoWriter *writer = NULL;
  VpxVideoInfo info = {0};
  vpx_codec_ctx_t codec;
  vpx_codec_enc_cfg_t enc_cfg;
  SvcContext svc_ctx;
  uint32_t i;
  uint32_t frame_cnt = 0;
  vpx_image_t raw;
  vpx_codec_err_t res;
  int pts = 0;            /* PTS starts at 0 */
  int frame_duration = 1; /* 1 timebase tick per frame */
  FILE *infile = NULL;
  int end_of_stream = 0;
  int frames_received = 0;

  memset(&svc_ctx, 0, sizeof(svc_ctx));
  svc_ctx.log_print = 1;
  exec_name = argv[0];
  parse_command_line(argc, argv, &app_input, &svc_ctx, &enc_cfg);

  // Allocate image buffer
  if (!vpx_img_alloc(&raw, VPX_IMG_FMT_I420, enc_cfg.g_w, enc_cfg.g_h, 32))
    die("Failed to allocate image %dx%d\n", enc_cfg.g_w, enc_cfg.g_h);

  if (!(infile = fopen(app_input.input_filename, "rb")))
    die("Failed to open %s for reading\n", app_input.input_filename);

  // Initialize codec
  if (vpx_svc_init(&svc_ctx, &codec, vpx_codec_vp9_cx(), &enc_cfg) !=
      VPX_CODEC_OK)
    die("Failed to initialize encoder\n");

  info.codec_fourcc = VP9_FOURCC;
  info.time_base.numerator = enc_cfg.g_timebase.num;
  info.time_base.denominator = enc_cfg.g_timebase.den;
  if (vpx_svc_get_layer_resolution(&svc_ctx, svc_ctx.spatial_layers - 1,
                                   (unsigned int *)&info.frame_width,
                                   (unsigned int *)&info.frame_height) !=
      VPX_CODEC_OK) {
    die("Failed to get output resolution");
  }

  if (!(app_input.passes == 2 && app_input.pass == 1)) {
    // We don't save the bitstream for the 1st pass on two pass rate control
    writer = vpx_video_writer_open(app_input.output_filename, kContainerIVF,
                                   &info);
    if (!writer)
      die("Failed to open %s for writing\n", app_input.output_filename);
  }

  // skip initial frames
  for (i = 0; i < app_input.frames_to_skip; ++i)
    vpx_img_read(&raw, infile);

  // Encode frames
  while (!end_of_stream) {
    vpx_codec_iter_t iter = NULL;
    const vpx_codec_cx_pkt_t *cx_pkt;
    if (frame_cnt >= app_input.frames_to_code || !vpx_img_read(&raw, infile)) {
      // We need one extra vpx_svc_encode call at end of stream to flush
      // encoder and get remaining data
      end_of_stream = 1;
    }

    res = vpx_svc_encode(&svc_ctx, &codec, (end_of_stream ? NULL : &raw),
                         pts, frame_duration, VPX_DL_GOOD_QUALITY);
    printf("%s", vpx_svc_get_message(&svc_ctx));
    if (res != VPX_CODEC_OK) {
      die_codec(&codec, "Failed to encode frame");
    }

    while ((cx_pkt = vpx_codec_get_cx_data(&codec, &iter)) != NULL) {
      switch (cx_pkt->kind) {
        case VPX_CODEC_CX_FRAME_PKT: {
          if (cx_pkt->data.frame.sz > 0)
            vpx_video_writer_write_frame(writer,
                                         cx_pkt->data.frame.buf,
                                         cx_pkt->data.frame.sz,
                                         cx_pkt->data.frame.pts);

          printf("SVC frame: %d, kf: %d, size: %d, pts: %d\n", frames_received,
                 !!(cx_pkt->data.frame.flags & VPX_FRAME_IS_KEY),
                 (int)cx_pkt->data.frame.sz, (int)cx_pkt->data.frame.pts);
          ++frames_received;
          break;
        }
        case VPX_CODEC_STATS_PKT: {
          stats_write(&app_input.rc_stats,
                      cx_pkt->data.twopass_stats.buf,
                      cx_pkt->data.twopass_stats.sz);
          break;
        }
        default: {
          break;
        }
      }
    }

    if (!end_of_stream) {
      ++frame_cnt;
      pts += frame_duration;
    }
  }

  printf("Processed %d frames\n", frame_cnt);

  fclose(infile);
  if (vpx_codec_destroy(&codec)) die_codec(&codec, "Failed to destroy codec");

  if (app_input.passes == 2)
    stats_close(&app_input.rc_stats, 1);

  if (writer) {
    vpx_video_writer_close(writer);
  }

  vpx_img_free(&raw);

  // display average size, psnr
  printf("%s", vpx_svc_dump_statistics(&svc_ctx));

  vpx_svc_release(&svc_ctx);

  return EXIT_SUCCESS;
}
Ejemplo n.º 9
0
int main(int argc, char **argv) {
    FILE *infile = NULL;
    VpxVideoWriter *writer = NULL;
    vpx_codec_ctx_t codec;
    vpx_codec_enc_cfg_t cfg;
    vpx_image_t raw;
    vpx_codec_err_t res;
    vpx_fixed_buf_t stats = {0};
    VpxVideoInfo info = {0};
    const VpxInterface *encoder = NULL;
    int pass;
    const int fps = 30;        // TODO(dkovalev) add command line argument
    const int bitrate = 200;   // kbit/s TODO(dkovalev) add command line argument
    const char *const codec_arg = argv[1];
    const char *const width_arg = argv[2];
    const char *const height_arg = argv[3];
    const char *const infile_arg = argv[4];
    const char *const outfile_arg = argv[5];
    exec_name = argv[0];

    if (argc != 6)
        die("Invalid number of arguments.");

    encoder = get_vpx_encoder_by_name(codec_arg);
    if (!encoder)
        die("Unsupported codec.");

    info.codec_fourcc = encoder->fourcc;
    info.time_base.numerator = 1;
    info.time_base.denominator = fps;
    info.frame_width = strtol(width_arg, NULL, 0);
    info.frame_height = strtol(height_arg, NULL, 0);

    if (info.frame_width <= 0 ||
            info.frame_height <= 0 ||
            (info.frame_width % 2) != 0 ||
            (info.frame_height % 2) != 0) {
        die("Invalid frame size: %dx%d", info.frame_width, info.frame_height);
    }

    if (!vpx_img_alloc(&raw, VPX_IMG_FMT_I420, info.frame_width,
                       info.frame_height, 1)) {
        die("Failed to allocate image", info.frame_width, info.frame_height);
    }

    writer = vpx_video_writer_open(outfile_arg, kContainerIVF, &info);
    if (!writer)
        die("Failed to open %s for writing", outfile_arg);

    printf("Using %s\n", vpx_codec_iface_name(encoder->interface()));

    res = vpx_codec_enc_config_default(encoder->interface(), &cfg, 0);
    if (res)
        die_codec(&codec, "Failed to get default codec config.");

    cfg.g_w = info.frame_width;
    cfg.g_h = info.frame_height;
    cfg.g_timebase.num = info.time_base.numerator;
    cfg.g_timebase.den = info.time_base.denominator;
    cfg.rc_target_bitrate = bitrate;

    for (pass = 0; pass < 2; ++pass) {
        int frame_count = 0;

        if (pass == 0) {
            cfg.g_pass = VPX_RC_FIRST_PASS;
        } else {
            cfg.g_pass = VPX_RC_LAST_PASS;
            cfg.rc_twopass_stats_in = stats;
        }

        if (!(infile = fopen(infile_arg, "rb")))
            die("Failed to open %s for reading", infile_arg);

        if (vpx_codec_enc_init(&codec, encoder->interface(), &cfg, 0))
            die_codec(&codec, "Failed to initialize encoder");

        while (vpx_img_read(&raw, infile)) {
            ++frame_count;

            if (pass == 0) {
                get_frame_stats(&codec, &raw, frame_count, 1, 0, VPX_DL_BEST_QUALITY,
                                &stats);
            } else {
                encode_frame(&codec, &raw, frame_count, 1, 0, VPX_DL_BEST_QUALITY,
                             writer);
            }
        }

        if (pass == 0) {
            get_frame_stats(&codec, NULL, frame_count, 1, 0, VPX_DL_BEST_QUALITY,
                            &stats);
        } else {
            printf("\n");
        }

        fclose(infile);
        printf("Pass %d complete. Processed %d frames.\n", pass + 1, frame_count);
        if (vpx_codec_destroy(&codec))
            die_codec(&codec, "Failed to destroy codec.");
    }

    vpx_img_free(&raw);
    free(stats.buf);

    vpx_video_writer_close(writer);

    return EXIT_SUCCESS;
}
Ejemplo n.º 10
0
int main(int argc, char **argv) {
  FILE *infile = NULL;
  vpx_codec_ctx_t codec = {0};
  vpx_codec_enc_cfg_t cfg = {0};
  int frame_count = 0;
  vpx_image_t raw = {0};
  vpx_codec_err_t res;
  VpxVideoInfo info = {0};
  VpxVideoWriter *writer = NULL;
  const VpxInterface *encoder = NULL;
  const int fps = 2;        // TODO(dkovalev) add command line argument
  const int bitrate = 200;   // kbit/s TODO(dkovalev) add command line argument

  exec_name = argv[0];

  if (argc != 5)
    die("Invalid number of arguments");

  encoder = get_vpx_encoder_by_name("vp8");  // only vp8 for now
  if (!encoder)
    die("Unsupported codec.");

  info.codec_fourcc = encoder->fourcc;
  info.frame_width = strtol(argv[1], NULL, 0);
  info.frame_height = strtol(argv[2], NULL, 0);
  info.time_base.numerator = 1;
  info.time_base.denominator = fps;

  if (info.frame_width <= 0 ||
      info.frame_height <= 0 ||
      (info.frame_width % 2) != 0 ||
      (info.frame_height % 2) != 0) {
    die("Invalid frame size: %dx%d", info.frame_width, info.frame_height);
  }

  if (!vpx_img_alloc(&raw, VPX_IMG_FMT_I420, info.frame_width,
                                             info.frame_height, 1)) {
    die("Failed to allocate image.");
  }

  printf("Using %s\n", vpx_codec_iface_name(encoder->interface()));

  res = vpx_codec_enc_config_default(encoder->interface(), &cfg, 0);
  if (res)
    die_codec(&codec, "Failed to get default codec config.");

  cfg.g_w = info.frame_width;
  cfg.g_h = info.frame_height;
  cfg.g_timebase.num = info.time_base.numerator;
  cfg.g_timebase.den = info.time_base.denominator;
  cfg.rc_target_bitrate = bitrate;

  writer = vpx_video_writer_open(argv[4], kContainerIVF, &info);
  if (!writer)
    die("Failed to open %s for writing.", argv[4]);

  if (!(infile = fopen(argv[3], "rb")))
    die("Failed to open %s for reading.", argv[3]);

  if (vpx_codec_enc_init(&codec, encoder->interface(), &cfg, 0))
    die_codec(&codec, "Failed to initialize encoder");

  while (vpx_img_read(&raw, infile)) {
    ++frame_count;

    if (frame_count == 22) {
      set_roi_map(&cfg, &codec);
    } else if (frame_count == 33) {
      set_active_map(&cfg, &codec);
    } else if (frame_count == 44) {
      unset_active_map(&cfg, &codec);
    }

    encode_frame(&codec, &raw, frame_count, writer);
  }
  encode_frame(&codec, NULL, -1, writer);
  printf("\n");
  fclose(infile);
  printf("Processed %d frames.\n", frame_count);

  vpx_img_free(&raw);
  if (vpx_codec_destroy(&codec))
    die_codec(&codec, "Failed to destroy codec.");

  vpx_video_writer_close(writer);

  return EXIT_SUCCESS;
}
Ejemplo n.º 11
-2
int main(int argc, char **argv) {
  FILE *infile = NULL;
  vpx_codec_ctx_t codec;
  vpx_codec_enc_cfg_t cfg;
  int frame_count = 0;
  vpx_image_t raw;
  vpx_codec_err_t res;
  VpxVideoInfo info;
  VpxVideoWriter *writer = NULL;
  const VpxInterface *encoder = NULL;
  int update_frame_num = 0;
  const int fps = 30;       // TODO(dkovalev) add command line argument
  const int bitrate = 200;  // kbit/s TODO(dkovalev) add command line argument

  vp8_zero(codec);
  vp8_zero(cfg);
  vp8_zero(info);

  exec_name = argv[0];

  if (argc != 6) die("Invalid number of arguments");

  // TODO(dkovalev): add vp9 support and rename the file accordingly
  encoder = get_vpx_encoder_by_name("vp8");
  if (!encoder) die("Unsupported codec.");

  update_frame_num = atoi(argv[5]);
  if (!update_frame_num) die("Couldn't parse frame number '%s'\n", argv[5]);

  info.codec_fourcc = encoder->fourcc;
  info.frame_width = (int)strtol(argv[1], NULL, 0);
  info.frame_height = (int)strtol(argv[2], NULL, 0);
  info.time_base.numerator = 1;
  info.time_base.denominator = fps;

  if (info.frame_width <= 0 || info.frame_height <= 0 ||
      (info.frame_width % 2) != 0 || (info.frame_height % 2) != 0) {
    die("Invalid frame size: %dx%d", info.frame_width, info.frame_height);
  }

  if (!vpx_img_alloc(&raw, VPX_IMG_FMT_I420, info.frame_width,
                     info.frame_height, 1)) {
    die("Failed to allocate image.");
  }

  printf("Using %s\n", vpx_codec_iface_name(encoder->codec_interface()));

  res = vpx_codec_enc_config_default(encoder->codec_interface(), &cfg, 0);
  if (res) die_codec(&codec, "Failed to get default codec config.");

  cfg.g_w = info.frame_width;
  cfg.g_h = info.frame_height;
  cfg.g_timebase.num = info.time_base.numerator;
  cfg.g_timebase.den = info.time_base.denominator;
  cfg.rc_target_bitrate = bitrate;

  writer = vpx_video_writer_open(argv[4], kContainerIVF, &info);
  if (!writer) die("Failed to open %s for writing.", argv[4]);

  if (!(infile = fopen(argv[3], "rb")))
    die("Failed to open %s for reading.", argv[3]);

  if (vpx_codec_enc_init(&codec, encoder->codec_interface(), &cfg, 0))
    die_codec(&codec, "Failed to initialize encoder");

  // Encode frames.
  while (vpx_img_read(&raw, infile)) {
    if (frame_count + 1 == update_frame_num) {
      vpx_ref_frame_t ref;
      ref.frame_type = VP8_LAST_FRAME;
      ref.img = raw;
      if (vpx_codec_control(&codec, VP8_SET_REFERENCE, &ref))
        die_codec(&codec, "Failed to set reference frame");
    }

    encode_frame(&codec, &raw, frame_count++, writer);
  }

  // Flush encoder.
  while (encode_frame(&codec, NULL, -1, writer)) {
  }

  printf("\n");
  fclose(infile);
  printf("Processed %d frames.\n", frame_count);

  vpx_img_free(&raw);
  if (vpx_codec_destroy(&codec)) die_codec(&codec, "Failed to destroy codec.");

  vpx_video_writer_close(writer);

  return EXIT_SUCCESS;
}