int motor_init(void)
{
_watchdog_id = watchdog_create(WATCHDOG_TIMEOUT_MSEC);
if (_watchdog_id < 0) {
return _watchdog_id;
}
int ret = motor_rtctl_init();
if (ret) {
return ret;
}
chMtxInit(&_mutex);
chEvtInit(&_setpoint_update_event);
configure();
init_filters();
if (_state.input_voltage < MIN_VALID_INPUT_VOLTAGE || _state.input_voltage > MAX_VALID_INPUT_VOLTAGE) {
lowsyslog("Motor: Invalid input voltage: %f\n", _state.input_voltage);
return -1;
}
ret = rpmctl_init();
if (ret) {
return ret;
}
motor_rtctl_stop();
assert_always(chThdCreateStatic(_wa_control_thread, sizeof(_wa_control_thread),
HIGHPRIO, control_thread, NULL));
return 0;
}
void
watchdog(var_t *table, char *stage)
{
watchdog_t *wd;
char *id;
if (pthread_mutex_lock(&watchdog_mutex))
{
log_sys_error("watchdog: pthread_mutex_lock");
return;
}
watchdog_init();
// In init id is not set. No problem.
id = vtable_get(table, "id");
if (id == NULL)
{
goto exit;
}
// Record does not exist
wd = sht_lookup(&watchdog_table, id);
if (wd == NULL)
{
wd = watchdog_create(id, stage);
if (wd == NULL)
{
log_error("watchdog: watchdog_create failed");
goto exit;
}
if (sht_insert(&watchdog_table, id, wd))
{
log_error("watchdog: sht_insert failed");
goto exit;
}
}
else
{
wd->wd_stage = stage;
wd->wd_instage = time(NULL);
}
exit:
if (pthread_mutex_unlock(&watchdog_mutex))
{
log_sys_error("watchdog: pthread_mutex_unlock");
}
return;
}
main(int unused_argc, char **unused_argv)
{
WATCHDOG *wp;
msg_verbose = 1;
wp = watchdog_create(10, (WATCHDOG_FN) 0, (char *) 0);
watchdog_start(wp);
do {
watchdog_pat();
} while (VSTREAM_GETCHAR() != VSTREAM_EOF);
watchdog_destroy(wp);
}
static void cmd_wdt(BaseSequentialStream *chp, int argc, char *argv[])
{
if (argc == 0) {
puts("Makes a watchdog timeout after X ms. Usage:\n wdt <X>");
return;
}
int timeout_ms = atoi(argv[0]);
if (timeout_ms < 1) {
timeout_ms = 1;
}
const int wdid = watchdog_create(timeout_ms);
lowsyslog("WDID: %i\n", wdid);
}
NORETURN multi_server_main(int argc, char **argv, MULTI_SERVER_FN service,...)
{
const char *myname = "multi_server_main";
VSTREAM *stream = 0;
char *root_dir = 0;
char *user_name = 0;
int debug_me = 0;
int daemon_mode = 1;
char *service_name = basename(argv[0]);
int delay;
int c;
int fd;
va_list ap;
MAIL_SERVER_INIT_FN pre_init = 0;
MAIL_SERVER_INIT_FN post_init = 0;
MAIL_SERVER_LOOP_FN loop = 0;
int key;
char *transport = 0;
#if 0
char *lock_path;
VSTRING *why;
#endif
int alone = 0;
int zerolimit = 0;
WATCHDOG *watchdog;
char *oname_val;
char *oname;
char *oval;
const char *err;
char *generation;
int msg_vstream_needed = 0;
int redo_syslog_init = 0;
/*
* Process environment options as early as we can.
*/
if (getenv(CONF_ENV_VERB))
msg_verbose = 1;
if (getenv(CONF_ENV_DEBUG))
debug_me = 1;
/*
* Don't die when a process goes away unexpectedly.
*/
signal(SIGPIPE, SIG_IGN);
/*
* Don't die for frivolous reasons.
*/
#ifdef SIGXFSZ
signal(SIGXFSZ, SIG_IGN);
#endif
/*
* May need this every now and then.
*/
var_procname = mystrdup(basename(argv[0]));
set_mail_conf_str(VAR_PROCNAME, var_procname);
/*
* Initialize logging and exit handler. Do the syslog first, so that its
* initialization completes before we enter the optional chroot jail.
*/
msg_syslog_init(mail_task(var_procname), LOG_PID, LOG_FACILITY);
if (msg_verbose)
msg_info("daemon started");
/*
* Check the Postfix library version as soon as we enable logging.
*/
MAIL_VERSION_CHECK;
/*
* Initialize from the configuration file. Allow command-line options to
* override compiled-in defaults or configured parameter values.
*/
mail_conf_suck();
/*
* Register dictionaries that use higher-level interfaces and protocols.
*/
mail_dict_init();
/*
* After database open error, continue execution with reduced
* functionality.
*/
dict_allow_surrogate = 1;
/*
* Pick up policy settings from master process. Shut up error messages to
* stderr, because no-one is going to see them.
*/
opterr = 0;
while ((c = GETOPT(argc, argv, "cdDi:lm:n:o:s:St:uvVz")) > 0) {
switch (c) {
case 'c':
root_dir = "setme";
break;
case 'd':
daemon_mode = 0;
break;
case 'D':
debug_me = 1;
break;
case 'i':
mail_conf_update(VAR_MAX_IDLE, optarg);
break;
case 'l':
alone = 1;
break;
case 'm':
mail_conf_update(VAR_MAX_USE, optarg);
break;
case 'n':
service_name = optarg;
break;
case 'o':
oname_val = mystrdup(optarg);
if ((err = split_nameval(oname_val, &oname, &oval)) != 0)
msg_fatal("invalid \"-o %s\" option value: %s", optarg, err);
mail_conf_update(oname, oval);
if (strcmp(oname, VAR_SYSLOG_NAME) == 0)
redo_syslog_init = 1;
myfree(oname_val);
break;
case 's':
if ((socket_count = atoi(optarg)) <= 0)
msg_fatal("invalid socket_count: %s", optarg);
break;
case 'S':
stream = VSTREAM_IN;
break;
case 'u':
user_name = "setme";
break;
case 't':
transport = optarg;
break;
case 'v':
msg_verbose++;
break;
case 'V':
if (++msg_vstream_needed == 1)
msg_vstream_init(mail_task(var_procname), VSTREAM_ERR);
break;
case 'z':
zerolimit = 1;
break;
default:
msg_fatal("invalid option: %c", c);
break;
}
}
/*
* Initialize generic parameters.
*/
mail_params_init();
if (redo_syslog_init)
msg_syslog_init(mail_task(var_procname), LOG_PID, LOG_FACILITY);
/*
* If not connected to stdin, stdin must not be a terminal.
*/
if (daemon_mode && stream == 0 && isatty(STDIN_FILENO)) {
msg_vstream_init(var_procname, VSTREAM_ERR);
msg_fatal("do not run this command by hand");
}
/*
* Application-specific initialization.
*/
va_start(ap, service);
while ((key = va_arg(ap, int)) != 0) {
switch (key) {
case MAIL_SERVER_INT_TABLE:
get_mail_conf_int_table(va_arg(ap, CONFIG_INT_TABLE *));
break;
case MAIL_SERVER_LONG_TABLE:
get_mail_conf_long_table(va_arg(ap, CONFIG_LONG_TABLE *));
break;
case MAIL_SERVER_STR_TABLE:
get_mail_conf_str_table(va_arg(ap, CONFIG_STR_TABLE *));
break;
case MAIL_SERVER_BOOL_TABLE:
get_mail_conf_bool_table(va_arg(ap, CONFIG_BOOL_TABLE *));
break;
case MAIL_SERVER_TIME_TABLE:
get_mail_conf_time_table(va_arg(ap, CONFIG_TIME_TABLE *));
break;
case MAIL_SERVER_RAW_TABLE:
get_mail_conf_raw_table(va_arg(ap, CONFIG_RAW_TABLE *));
break;
case MAIL_SERVER_NINT_TABLE:
get_mail_conf_nint_table(va_arg(ap, CONFIG_NINT_TABLE *));
break;
case MAIL_SERVER_NBOOL_TABLE:
get_mail_conf_nbool_table(va_arg(ap, CONFIG_NBOOL_TABLE *));
break;
case MAIL_SERVER_PRE_INIT:
pre_init = va_arg(ap, MAIL_SERVER_INIT_FN);
break;
case MAIL_SERVER_POST_INIT:
post_init = va_arg(ap, MAIL_SERVER_INIT_FN);
break;
case MAIL_SERVER_LOOP:
loop = va_arg(ap, MAIL_SERVER_LOOP_FN);
break;
case MAIL_SERVER_EXIT:
multi_server_onexit = va_arg(ap, MAIL_SERVER_EXIT_FN);
break;
case MAIL_SERVER_PRE_ACCEPT:
multi_server_pre_accept = va_arg(ap, MAIL_SERVER_ACCEPT_FN);
break;
case MAIL_SERVER_PRE_DISCONN:
multi_server_pre_disconn = va_arg(ap, MAIL_SERVER_DISCONN_FN);
break;
case MAIL_SERVER_IN_FLOW_DELAY:
multi_server_in_flow_delay = 1;
break;
case MAIL_SERVER_SOLITARY:
if (stream == 0 && !alone)
msg_fatal("service %s requires a process limit of 1",
service_name);
break;
case MAIL_SERVER_UNLIMITED:
if (stream == 0 && !zerolimit)
msg_fatal("service %s requires a process limit of 0",
service_name);
break;
case MAIL_SERVER_PRIVILEGED:
if (user_name)
msg_fatal("service %s requires privileged operation",
service_name);
break;
default:
msg_panic("%s: unknown argument type: %d", myname, key);
}
}
va_end(ap);
if (root_dir)
root_dir = var_queue_dir;
if (user_name)
user_name = var_mail_owner;
/*
* Can options be required?
*/
if (stream == 0) {
if (transport == 0)
msg_fatal("no transport type specified");
if (strcasecmp(transport, MASTER_XPORT_NAME_INET) == 0)
multi_server_accept = multi_server_accept_inet;
else if (strcasecmp(transport, MASTER_XPORT_NAME_UNIX) == 0)
multi_server_accept = multi_server_accept_local;
#ifdef MASTER_XPORT_NAME_PASS
else if (strcasecmp(transport, MASTER_XPORT_NAME_PASS) == 0)
multi_server_accept = multi_server_accept_pass;
#endif
else
msg_fatal("unsupported transport type: %s", transport);
}
/*
* Retrieve process generation from environment.
*/
if ((generation = getenv(MASTER_GEN_NAME)) != 0) {
if (!alldig(generation))
msg_fatal("bad generation: %s", generation);
OCTAL_TO_UNSIGNED(multi_server_generation, generation);
if (msg_verbose)
msg_info("process generation: %s (%o)",
generation, multi_server_generation);
}
/*
* Optionally start the debugger on ourself.
*/
if (debug_me)
debug_process();
/*
* Traditionally, BSD select() can't handle multiple processes selecting
* on the same socket, and wakes up every process in select(). See TCP/IP
* Illustrated volume 2 page 532. We avoid select() collisions with an
* external lock file.
*/
/*
* XXX Can't compete for exclusive access to the listen socket because we
* also have to monitor existing client connections for service requests.
*/
#if 0
if (stream == 0 && !alone) {
lock_path = concatenate(DEF_PID_DIR, "/", transport,
".", service_name, (char *) 0);
why = vstring_alloc(1);
if ((multi_server_lock = safe_open(lock_path, O_CREAT | O_RDWR, 0600,
(struct stat *) 0, -1, -1, why)) == 0)
msg_fatal("open lock file %s: %s", lock_path, vstring_str(why));
close_on_exec(vstream_fileno(multi_server_lock), CLOSE_ON_EXEC);
myfree(lock_path);
vstring_free(why);
}
#endif
/*
* Set up call-back info.
*/
multi_server_service = service;
multi_server_name = service_name;
multi_server_argv = argv + optind;
/*
* Run pre-jail initialization.
*/
if (chdir(var_queue_dir) < 0)
msg_fatal("chdir(\"%s\"): %m", var_queue_dir);
if (pre_init)
pre_init(multi_server_name, multi_server_argv);
/*
* Optionally, restrict the damage that this process can do.
*/
resolve_local_init();
tzset();
chroot_uid(root_dir, user_name);
/*
* Run post-jail initialization.
*/
if (post_init)
post_init(multi_server_name, multi_server_argv);
/*
* Are we running as a one-shot server with the client connection on
* standard input? If so, make sure the output is written to stdout so as
* to satisfy common expectation.
*/
if (stream != 0) {
vstream_control(stream,
VSTREAM_CTL_DOUBLE,
VSTREAM_CTL_WRITE_FD, STDOUT_FILENO,
VSTREAM_CTL_END);
service(stream, multi_server_name, multi_server_argv);
vstream_fflush(stream);
multi_server_exit();
}
/*
* Running as a semi-resident server. Service connection requests.
* Terminate when we have serviced a sufficient number of clients, when
* no-one has been talking to us for a configurable amount of time, or
* when the master process terminated abnormally.
*/
if (var_idle_limit > 0)
event_request_timer(multi_server_timeout, (char *) 0, var_idle_limit);
for (fd = MASTER_LISTEN_FD; fd < MASTER_LISTEN_FD + socket_count; fd++) {
event_enable_read(fd, multi_server_accept, CAST_INT_TO_CHAR_PTR(fd));
close_on_exec(fd, CLOSE_ON_EXEC);
}
event_enable_read(MASTER_STATUS_FD, multi_server_abort, (char *) 0);
close_on_exec(MASTER_STATUS_FD, CLOSE_ON_EXEC);
close_on_exec(MASTER_FLOW_READ, CLOSE_ON_EXEC);
close_on_exec(MASTER_FLOW_WRITE, CLOSE_ON_EXEC);
watchdog = watchdog_create(var_daemon_timeout, (WATCHDOG_FN) 0, (char *) 0);
/*
* The event loop, at last.
*/
while (var_use_limit == 0 || use_count < var_use_limit || client_count > 0) {
if (multi_server_lock != 0) {
watchdog_stop(watchdog);
if (myflock(vstream_fileno(multi_server_lock), INTERNAL_LOCK,
MYFLOCK_OP_EXCLUSIVE) < 0)
msg_fatal("select lock: %m");
}
watchdog_start(watchdog);
delay = loop ? loop(multi_server_name, multi_server_argv) : -1;
event_loop(delay);
}
multi_server_exit();
}
int main(int argc, char **argv)
{
static VSTREAM *lock_fp;
static VSTREAM *data_lock_fp;
VSTRING *lock_path;
VSTRING *data_lock_path;
off_t inherited_limit;
int debug_me = 0;
int ch;
int fd;
int n;
int test_lock = 0;
VSTRING *why;
WATCHDOG *watchdog;
ARGV *import_env;
/*
* Fingerprint executables and core dumps.
*/
MAIL_VERSION_STAMP_ALLOCATE;
/*
* Initialize.
*/
umask(077); /* never fails! */
/*
* Process environment options as early as we can.
*/
if (getenv(CONF_ENV_VERB))
msg_verbose = 1;
if (getenv(CONF_ENV_DEBUG))
debug_me = 1;
/*
* Don't die when a process goes away unexpectedly.
*/
signal(SIGPIPE, SIG_IGN);
/*
* Strip and save the process name for diagnostics etc.
*/
var_procname = mystrdup(basename(argv[0]));
/*
* When running a child process, don't leak any open files that were
* leaked to us by our own (privileged) parent process. Descriptors 0-2
* are taken care of after we have initialized error logging.
*
* Some systems such as AIX have a huge per-process open file limit. In
* those cases, limit the search for potential file descriptor leaks to
* just the first couple hundred.
*
* The Debian post-installation script passes an open file descriptor into
* the master process and waits forever for someone to close it. Because
* of this we have to close descriptors > 2, and pray that doing so does
* not break things.
*/
closefrom(3);
/*
* Initialize logging and exit handler.
*/
msg_syslog_init(mail_task(var_procname), LOG_PID, LOG_FACILITY);
/*
* Check the Postfix library version as soon as we enable logging.
*/
MAIL_VERSION_CHECK;
/*
* The mail system must be run by the superuser so it can revoke
* privileges for selected operations. That's right - it takes privileges
* to toss privileges.
*/
if (getuid() != 0)
msg_fatal("the master command is reserved for the superuser");
if (unsafe() != 0)
msg_fatal("the master command must not run as a set-uid process");
/*
* Process JCL.
*/
while ((ch = GETOPT(argc, argv, "c:Dde:tv")) > 0) {
switch (ch) {
case 'c':
if (setenv(CONF_ENV_PATH, optarg, 1) < 0)
msg_fatal("out of memory");
break;
case 'd':
master_detach = 0;
break;
case 'e':
event_request_timer(master_exit_event, (char *) 0, atoi(optarg));
break;
case 'D':
debug_me = 1;
break;
case 't':
test_lock = 1;
break;
case 'v':
msg_verbose++;
break;
default:
usage(argv[0]);
/* NOTREACHED */
}
}
/*
* This program takes no other arguments.
*/
if (argc > optind)
usage(argv[0]);
/*
* If started from a terminal, get rid of any tty association. This also
* means that all errors and warnings must go to the syslog daemon.
*/
if (master_detach)
for (fd = 0; fd < 3; fd++) {
(void) close(fd);
if (open("/dev/null", O_RDWR, 0) != fd)
msg_fatal("open /dev/null: %m");
}
/*
* Run in a separate process group, so that "postfix stop" can terminate
* all MTA processes cleanly. Give up if we can't separate from our
* parent process. We're not supposed to blow away the parent.
*/
if (debug_me == 0 && master_detach != 0 && setsid() == -1 && getsid(0) != getpid())
msg_fatal("unable to set session and process group ID: %m");
/*
* Make some room for plumbing with file descriptors. XXX This breaks
* when a service listens on many ports. In order to do this right we
* must change the master-child interface so that descriptors do not need
* to have fixed numbers.
*
* In a child we need two descriptors for the flow control pipe, one for
* child->master status updates and at least one for listening.
*/
for (n = 0; n < 5; n++) {
if (close_on_exec(dup(0), CLOSE_ON_EXEC) < 0)
msg_fatal("dup(0): %m");
}
/*
* Final initializations. Unfortunately, we must read the global Postfix
* configuration file after doing command-line processing, so that we get
* consistent results when we SIGHUP the server to reload configuration
* files.
*/
master_vars_init();
/*
* In case of multi-protocol support. This needs to be done because
* master does not invoke mail_params_init() (it was written before that
* code existed).
*/
(void) inet_proto_init(VAR_INET_PROTOCOLS, var_inet_protocols);
/*
* Environment import filter, to enforce consistent behavior whether
* Postfix is started by hand, or at system boot time.
*/
import_env = argv_split(var_import_environ, ", \t\r\n");
clean_env(import_env->argv);
argv_free(import_env);
if ((inherited_limit = get_file_limit()) < 0)
set_file_limit(OFF_T_MAX);
if (chdir(var_queue_dir))
msg_fatal("chdir %s: %m", var_queue_dir);
/*
* Lock down the master.pid file. In test mode, no file means that it
* isn't locked.
*/
lock_path = vstring_alloc(10);
data_lock_path = vstring_alloc(10);
why = vstring_alloc(10);
vstring_sprintf(lock_path, "%s/%s.pid", DEF_PID_DIR, var_procname);
if (test_lock && access(vstring_str(lock_path), F_OK) < 0)
exit(0);
lock_fp = open_lock(vstring_str(lock_path), O_RDWR | O_CREAT, 0644, why);
if (test_lock)
exit(lock_fp ? 0 : 1);
if (lock_fp == 0)
msg_fatal("open lock file %s: %s",
vstring_str(lock_path), vstring_str(why));
vstream_fprintf(lock_fp, "%*lu\n", (int) sizeof(unsigned long) * 4,
(unsigned long) var_pid);
if (vstream_fflush(lock_fp))
msg_fatal("cannot update lock file %s: %m", vstring_str(lock_path));
close_on_exec(vstream_fileno(lock_fp), CLOSE_ON_EXEC);
/*
* Lock down the Postfix-writable data directory.
*/
vstring_sprintf(data_lock_path, "%s/%s.lock", var_data_dir, var_procname);
set_eugid(var_owner_uid, var_owner_gid);
data_lock_fp =
open_lock(vstring_str(data_lock_path), O_RDWR | O_CREAT, 0644, why);
set_ugid(getuid(), getgid());
if (data_lock_fp == 0)
msg_fatal("open lock file %s: %s",
vstring_str(data_lock_path), vstring_str(why));
vstream_fprintf(data_lock_fp, "%*lu\n", (int) sizeof(unsigned long) * 4,
(unsigned long) var_pid);
if (vstream_fflush(data_lock_fp))
msg_fatal("cannot update lock file %s: %m", vstring_str(data_lock_path));
close_on_exec(vstream_fileno(data_lock_fp), CLOSE_ON_EXEC);
/*
* Clean up.
*/
vstring_free(why);
vstring_free(lock_path);
vstring_free(data_lock_path);
/*
* Optionally start the debugger on ourself.
*/
if (debug_me)
debug_process();
/*
* Finish initialization, last part. We must process configuration files
* after processing command-line parameters, so that we get consistent
* results when we SIGHUP the server to reload configuration files.
*/
master_config();
master_sigsetup();
master_flow_init();
msg_info("daemon started -- version %s, configuration %s",
var_mail_version, var_config_dir);
/*
* Process events. The event handler will execute the read/write/timer
* action routines. Whenever something has happened, see if we received
* any signal in the mean time. Although the master process appears to do
* multiple things at the same time, it really is all a single thread, so
* that there are no concurrency conflicts within the master process.
*/
#define MASTER_WATCHDOG_TIME 1000
watchdog = watchdog_create(MASTER_WATCHDOG_TIME, (WATCHDOG_FN) 0, (char *) 0);
for (;;) {
#ifdef HAS_VOLATILE_LOCKS
if (myflock(vstream_fileno(lock_fp), INTERNAL_LOCK,
MYFLOCK_OP_EXCLUSIVE) < 0)
msg_fatal("refresh exclusive lock: %m");
if (myflock(vstream_fileno(data_lock_fp), INTERNAL_LOCK,
MYFLOCK_OP_EXCLUSIVE) < 0)
msg_fatal("refresh exclusive lock: %m");
#endif
watchdog_start(watchdog); /* same as trigger servers */
event_loop(MASTER_WATCHDOG_TIME / 2);
if (master_gotsighup) {
msg_info("reload -- version %s, configuration %s",
var_mail_version, var_config_dir);
master_gotsighup = 0; /* this first */
master_vars_init(); /* then this */
master_refresh(); /* then this */
}
if (master_gotsigchld) {
if (msg_verbose)
msg_info("got sigchld");
master_gotsigchld = 0; /* this first */
master_reap_child(); /* then this */
}
}
}
NORETURN trigger_server_main(int argc, char **argv, TRIGGER_SERVER_FN service,...)
{
char *myname = "trigger_server_main";
char *root_dir = 0;
char *user_name = 0;
int debug_me = 0;
char *service_name = basename(argv[0]);
VSTREAM *stream = 0;
int delay;
int c;
int socket_count = 1;
int fd;
va_list ap;
MAIL_SERVER_INIT_FN pre_init = 0;
MAIL_SERVER_INIT_FN post_init = 0;
MAIL_SERVER_LOOP_FN loop = 0;
int key;
char buf[TRIGGER_BUF_SIZE];
int len;
char *transport = 0;
char *lock_path;
VSTRING *why;
int alone = 0;
int zerolimit = 0;
WATCHDOG *watchdog;
char *oval;
/*
* Process environment options as early as we can.
*/
if (getenv(CONF_ENV_VERB))
msg_verbose = 1;
if (getenv(CONF_ENV_DEBUG))
debug_me = 1;
/*
* Don't die when a process goes away unexpectedly.
*/
signal(SIGPIPE, SIG_IGN);
/*
* Don't die for frivolous reasons.
*/
#ifdef SIGXFSZ
signal(SIGXFSZ, SIG_IGN);
#endif
/*
* May need this every now and then.
*/
var_procname = mystrdup(basename(argv[0]));
set_mail_conf_str(VAR_PROCNAME, var_procname);
/*
* Initialize logging and exit handler. Do the syslog first, so that its
* initialization completes before we enter the optional chroot jail.
*/
msg_syslog_init(mail_task(var_procname), LOG_PID, LOG_FACILITY);
if (msg_verbose)
msg_info("daemon started");
/*
* Initialize from the configuration file. Allow command-line options to
* override compiled-in defaults or configured parameter values.
*/
mail_conf_suck();
/*
* Register dictionaries that use higher-level interfaces and protocols.
*/
mail_dict_init();
/*
* Pick up policy settings from master process. Shut up error messages to
* stderr, because no-one is going to see them.
*/
opterr = 0;
while ((c = GETOPT(argc, argv, "cDi:lm:n:o:s:St:uvzZ")) > 0) {
switch (c) {
case 'c':
root_dir = "setme";
break;
case 'D':
debug_me = 1;
break;
case 'i':
mail_conf_update(VAR_MAX_IDLE, optarg);
break;
case 'l':
alone = 1;
break;
case 'm':
mail_conf_update(VAR_MAX_USE, optarg);
break;
case 'n':
service_name = optarg;
break;
case 'o':
if ((oval = split_at(optarg, '=')) == 0)
oval = "";
mail_conf_update(optarg, oval);
break;
case 's':
if ((socket_count = atoi(optarg)) <= 0)
msg_fatal("invalid socket_count: %s", optarg);
break;
case 'S':
stream = VSTREAM_IN;
break;
case 't':
transport = optarg;
break;
case 'u':
user_name = "setme";
break;
case 'v':
msg_verbose++;
break;
case 'z':
zerolimit = 1;
break;
case 'Z':
msg_debug++;
break;
default:
msg_fatal("invalid option: %c", c);
break;
}
}
/*
* Initialize generic parameters.
*/
mail_params_init();
/*
* Application-specific initialization.
*/
va_start(ap, service);
while ((key = va_arg(ap, int)) != 0) {
switch (key) {
case MAIL_SERVER_INT_TABLE:
get_mail_conf_int_table(va_arg(ap, CONFIG_INT_TABLE *));
break;
case MAIL_SERVER_STR_TABLE:
get_mail_conf_str_table(va_arg(ap, CONFIG_STR_TABLE *));
break;
case MAIL_SERVER_BOOL_TABLE:
get_mail_conf_bool_table(va_arg(ap, CONFIG_BOOL_TABLE *));
break;
case MAIL_SERVER_TIME_TABLE:
get_mail_conf_time_table(va_arg(ap, CONFIG_TIME_TABLE *));
break;
case MAIL_SERVER_RAW_TABLE:
get_mail_conf_raw_table(va_arg(ap, CONFIG_RAW_TABLE *));
break;
case MAIL_SERVER_PRE_INIT:
pre_init = va_arg(ap, MAIL_SERVER_INIT_FN);
break;
case MAIL_SERVER_POST_INIT:
post_init = va_arg(ap, MAIL_SERVER_INIT_FN);
break;
case MAIL_SERVER_LOOP:
loop = va_arg(ap, MAIL_SERVER_LOOP_FN);
break;
case MAIL_SERVER_EXIT:
trigger_server_onexit = va_arg(ap, MAIL_SERVER_EXIT_FN);
break;
case MAIL_SERVER_PRE_ACCEPT:
trigger_server_pre_accept = va_arg(ap, MAIL_SERVER_ACCEPT_FN);
break;
case MAIL_SERVER_IN_FLOW_DELAY:
trigger_server_in_flow_delay = 1;
break;
case MAIL_SERVER_SOLITARY:
if (!alone)
msg_fatal("service %s requires a process limit of 1",
service_name);
break;
case MAIL_SERVER_UNLIMITED:
if (!zerolimit)
msg_fatal("service %s requires a process limit of 0",
service_name);
break;
default:
msg_panic("%s: unknown argument type: %d", myname, key);
}
}
va_end(ap);
if (root_dir)
root_dir = var_queue_dir;
if (user_name)
user_name = var_mail_owner;
/*
* If not connected to stdin, stdin must not be a terminal.
*/
if (stream == 0 && isatty(STDIN_FILENO)) {
msg_vstream_init(var_procname, VSTREAM_ERR);
msg_fatal("do not run this command by hand");
}
/*
* Can options be required?
*
* XXX Initially this code was implemented with UNIX-domain sockets, but
* Solaris <= 2.5 UNIX-domain sockets misbehave hopelessly when the
* client disconnects before the server has accepted the connection.
* Symptom: the server accept() fails with EPIPE or EPROTO, but the
* socket stays readable, so that the program goes into a wasteful loop.
*
* The initial fix was to use FIFOs, but those turn out to have their own
* problems, witness the workarounds in the fifo_listen() routine.
* Therefore we support both FIFOs and UNIX-domain sockets, so that the
* user can choose whatever works best.
*
* Well, I give up. Solaris UNIX-domain sockets still don't work properly,
* so it will have to limp along with a streams-specific alternative.
*/
if (stream == 0) {
if (transport == 0)
msg_fatal("no transport type specified");
if (strcasecmp(transport, MASTER_XPORT_NAME_UNIX) == 0)
trigger_server_accept = trigger_server_accept_local;
else if (strcasecmp(transport, MASTER_XPORT_NAME_FIFO) == 0)
trigger_server_accept = trigger_server_accept_fifo;
else
msg_fatal("unsupported transport type: %s", transport);
}
/*
* Optionally start the debugger on ourself.
*/
if (debug_me)
debug_process();
/*
* Traditionally, BSD select() can't handle multiple processes selecting
* on the same socket, and wakes up every process in select(). See TCP/IP
* Illustrated volume 2 page 532. We avoid select() collisions with an
* external lock file.
*/
if (stream == 0 && !alone) {
lock_path = concatenate(DEF_PID_DIR, "/", transport,
".", service_name, (char *) 0);
why = vstring_alloc(1);
if ((trigger_server_lock = safe_open(lock_path, O_CREAT | O_RDWR, 0600,
(struct stat *) 0, -1, -1, why)) == 0)
msg_fatal("open lock file %s: %s", lock_path, vstring_str(why));
close_on_exec(vstream_fileno(trigger_server_lock), CLOSE_ON_EXEC);
myfree(lock_path);
vstring_free(why);
}
/*
* Set up call-back info.
*/
trigger_server_service = service;
trigger_server_name = service_name;
trigger_server_argv = argv + optind;
/*
* Run pre-jail initialization.
*/
if (chdir(var_queue_dir) < 0)
msg_fatal("chdir(\"%s\"): %m", var_queue_dir);
if (pre_init)
pre_init(trigger_server_name, trigger_server_argv);
/*
* Optionally, restrict the damage that this process can do.
*/
resolve_local_init();
chroot_uid(root_dir, user_name);
/*
* Run post-jail initialization.
*/
if (post_init)
post_init(trigger_server_name, trigger_server_argv);
/*
* Are we running as a one-shot server with the client connection on
* standard input?
*/
if (stream != 0) {
if ((len = read(vstream_fileno(stream), buf, sizeof(buf))) <= 0)
msg_fatal("read: %m");
service(buf, len, trigger_server_name, trigger_server_argv);
vstream_fflush(stream);
trigger_server_exit();
}
/*
* Running as a semi-resident server. Service connection requests.
* Terminate when we have serviced a sufficient number of clients, when
* no-one has been talking to us for a configurable amount of time, or
* when the master process terminated abnormally.
*/
if (var_idle_limit > 0)
event_request_timer(trigger_server_timeout, (char *) 0, var_idle_limit);
for (fd = MASTER_LISTEN_FD; fd < MASTER_LISTEN_FD + socket_count; fd++) {
event_enable_read(fd, trigger_server_accept, CAST_INT_TO_CHAR_PTR(fd));
close_on_exec(fd, CLOSE_ON_EXEC);
}
event_enable_read(MASTER_STATUS_FD, trigger_server_abort, (char *) 0);
close_on_exec(MASTER_STATUS_FD, CLOSE_ON_EXEC);
close_on_exec(MASTER_FLOW_READ, CLOSE_ON_EXEC);
close_on_exec(MASTER_FLOW_WRITE, CLOSE_ON_EXEC);
watchdog = watchdog_create(1000, (WATCHDOG_FN) 0, (char *) 0);
/*
* The event loop, at last.
*/
while (var_use_limit == 0 || use_count < var_use_limit) {
if (trigger_server_lock != 0) {
watchdog_stop(watchdog);
if (myflock(vstream_fileno(trigger_server_lock), INTERNAL_LOCK,
MYFLOCK_OP_EXCLUSIVE) < 0)
msg_fatal("select lock: %m");
}
watchdog_start(watchdog);
delay = loop ? loop(trigger_server_name, trigger_server_argv) : -1;
event_loop(delay);
}
trigger_server_exit();
}