void
wb_control_sheet_add (WorkbookControl *wbc, SheetView *sv)
{
WorkbookControlClass *wbc_class;
g_return_if_fail (IS_WORKBOOK_CONTROL (wbc));
wbc_class = WBC_CLASS (wbc);
if (wbc_class != NULL && wbc_class->sheet.add != NULL) {
Sheet *new_sheet = sv_sheet (sv);
wbc_class->sheet.add (wbc, sv);
/* If this is the current sheet init the display */
if (new_sheet == wb_control_cur_sheet (wbc)) {
WorkbookView *wbv = wb_control_view (wbc);
wb_control_sheet_focus (wbc, new_sheet);
wb_view_selection_desc (wbv, TRUE, wbc);
wb_view_edit_line_set (wbv, wbc);
wb_control_style_feedback (wbc, NULL);
wb_control_menu_state_update (wbc, MS_ALL);
wb_control_update_action_sensitivity (wbc);
}
}
}
/**
* wbcg_edit_finish:
* @wbcg: #WBCGtk
* @result: what should we do with the content
* @showed_dialog: If non-NULL will indicate if a dialog was displayed.
*
* Return: TRUE if editing completed successfully, or we were no editing.
**/
gboolean
wbcg_edit_finish (WBCGtk *wbcg, WBCEditResult result,
gboolean *showed_dialog)
{
Sheet *sheet;
SheetView *sv;
WorkbookControl *wbc;
WorkbookView *wbv;
g_return_val_if_fail (GNM_IS_WBC_GTK (wbcg), FALSE);
wbc = GNM_WBC (wbcg);
wbv = wb_control_view (wbc);
wbcg_focus_cur_scg (wbcg);
gnm_expr_entry_close_tips (wbcg_get_entry_logical (wbcg));
if (showed_dialog != NULL)
*showed_dialog = FALSE;
/* Remove the range selection cursor if it exists */
if (NULL != wbcg->rangesel)
scg_rangesel_stop (wbcg->rangesel, result == WBC_EDIT_REJECT);
if (!wbcg_is_editing (wbcg)) {
/* We may have a guru up even if we are not editing. remove it.
* Do NOT remove until later it if we are editing, it is possible
* that we may want to continue editing.
*/
if (wbcg->edit_line.guru != NULL) {
GtkWidget *w = wbcg->edit_line.guru;
wbc_gtk_detach_guru (wbcg);
gtk_widget_destroy (w);
}
return TRUE;
}
g_return_val_if_fail (IS_SHEET (wbcg->editing_sheet), TRUE);
sheet = wbcg->editing_sheet;
sv = sheet_get_view (sheet, wbv);
/* Save the results before changing focus */
if (result != WBC_EDIT_REJECT) {
ValidationStatus valid = GNM_VALIDATION_STATUS_VALID;
char *free_txt = NULL;
char const *txt;
GnmStyle const *mstyle;
char const *expr_txt = NULL;
GOFormat const *fmt;
GnmValue *value;
GOUndo *u = NULL;
GSList *selection = selection_get_ranges (sv, FALSE);
GnmParsePos pp;
GnmExprTop const *texpr = NULL;
parse_pos_init_editpos (&pp, sv);
/* Array only works on single range. */
if (result == WBC_EDIT_ACCEPT_ARRAY &&
(selection == NULL || selection->next != NULL))
result = WBC_EDIT_ACCEPT_RANGE;
/******* Check whether we would split a range ********/
switch (result) {
case (WBC_EDIT_ACCEPT_RANGE):
case (WBC_EDIT_ACCEPT_ARRAY): {
if (sheet_ranges_split_region (sheet, selection,
GO_CMD_CONTEXT (wbc), _("Set Text"))) {
range_fragment_free (selection);
if (showed_dialog != NULL)
*showed_dialog = TRUE;
return FALSE;
}
if (result == WBC_EDIT_ACCEPT_ARRAY &&
sheet_range_contains_merges_or_arrays
(sheet, selection->data,
GO_CMD_CONTEXT (wbc), _("Set Text"),
TRUE, FALSE)) {
range_fragment_free (selection);
if (showed_dialog != NULL)
*showed_dialog = TRUE;
return FALSE;
}
break;
}
case (WBC_EDIT_ACCEPT_WO_AC):
case (WBC_EDIT_ACCEPT): {
GnmCell const *cell = sheet_cell_get
(sheet, sv->edit_pos.col, sv->edit_pos.row);
if (gnm_cell_is_nonsingleton_array (cell)) {
gnm_cmd_context_error_splits_array (GO_CMD_CONTEXT (wbc),
_("Set Text"), NULL);
if (showed_dialog != NULL)
*showed_dialog = TRUE;
range_fragment_free (selection);
return FALSE;
}
break;
}
case (WBC_EDIT_REJECT):
default:
/* We should not be able to get here! */
break;
}
/******* Check whether the range is locked ********/
switch (result) {
case (WBC_EDIT_ACCEPT_RANGE):
case (WBC_EDIT_ACCEPT_ARRAY): {
if (cmd_selection_is_locked_effective (sheet, selection, wbc,
_("Set Text"))) {
range_fragment_free (selection);
if (showed_dialog != NULL)
*showed_dialog = TRUE;
return FALSE;
}
break;
}
case (WBC_EDIT_ACCEPT_WO_AC):
case (WBC_EDIT_ACCEPT): {
GnmRange r;
r.end = r.start = pp.eval;
if (cmd_cell_range_is_locked_effective (sheet, &r, wbc,
_("Set Text"))) {
range_fragment_free (selection);
if (showed_dialog != NULL)
*showed_dialog = TRUE;
return FALSE;
}
break;
}
case (WBC_EDIT_REJECT):
default:
/* We should not be able to get here! */
break;
}
/*****************************************************/
txt = wbcg_edit_get_display_text (wbcg);
mstyle = sheet_style_get (sheet, sv->edit_pos.col, sv->edit_pos.row);
fmt = gnm_cell_get_format (sheet_cell_fetch (sheet, sv->edit_pos.col,
sv->edit_pos.row));
value = format_match (txt, fmt,
workbook_date_conv (sheet->workbook));
if (value == NULL)
expr_txt = gnm_expr_char_start_p (txt);
else
value_release (value);
/* NOTE : do not modify gnm_expr_char_start_p to exclude "-"
* it _can_ start an expression, which is required for rangesel
* it just isn't an expression. */
if (expr_txt != NULL && *expr_txt != '\0' && strcmp (expr_txt, "-")) {
GnmExprTop const *texpr_test = NULL;
GnmParseError perr;
parse_error_init (&perr);
texpr_test = gnm_expr_parse_str (expr_txt,
&pp, GNM_EXPR_PARSE_DEFAULT, NULL, &perr);
/* Try adding a single extra closing paren to see if it helps */
if (texpr_test == NULL && perr.err != NULL &&
perr.err->code == PERR_MISSING_PAREN_CLOSE) {
GnmParseError tmp_err;
char *tmp = g_strconcat (txt, ")", NULL);
parse_error_init (&tmp_err);
texpr_test = gnm_expr_parse_str (gnm_expr_char_start_p (tmp),
&pp, GNM_EXPR_PARSE_DEFAULT,
NULL, &tmp_err);
parse_error_free (&tmp_err);
if (texpr_test != NULL) {
txt = free_txt = tmp;
expr_txt = gnm_expr_char_start_p (txt);
} else
g_free (tmp);
}
if (texpr_test == NULL && perr.err != NULL) {
ValidationStatus reedit;
/* set focus _before_ selection. gtk2 seems to
* screw with selection in gtk_entry_grab_focus
* (no longer required now that we clear
* gtk-entry-select-on-focus) */
gtk_window_set_focus (wbcg_toplevel (wbcg),
(GtkWidget *) wbcg_get_entry (wbcg));
if (perr.begin_char != 0 || perr.end_char != 0) {
int offset = expr_txt - txt;
gtk_editable_select_region (GTK_EDITABLE (wbcg_get_entry (wbcg)),
offset + perr.begin_char,
offset + perr.end_char);
} else
gtk_editable_set_position (
GTK_EDITABLE (wbcg_get_entry (wbcg)), -1);
reedit = wb_control_validation_msg (GNM_WBC (wbcg),
GNM_VALIDATION_STYLE_PARSE_ERROR, NULL,
perr.err->message);
if (showed_dialog != NULL)
*showed_dialog = TRUE;
parse_error_free (&perr);
if (reedit == GNM_VALIDATION_STATUS_INVALID_EDIT) {
range_fragment_free (selection);
return FALSE;
}
/* restore focus to sheet , or we'll leave edit
* mode only to jump right back in the new
* cell because it looks like someone just
* focused on the edit line (eg hit F2) */
wbcg_focus_cur_scg (wbcg);
}
if (texpr_test != NULL)
gnm_expr_top_unref (texpr_test);
}
/* We only enter an array formula if the text is a formula */
if (result == WBC_EDIT_ACCEPT_ARRAY && !expr_txt)
result = WBC_EDIT_ACCEPT_RANGE;
if (result == WBC_EDIT_ACCEPT_ARRAY) {
GnmParsePos pp_array;
GnmRange *r = selection->data;
parse_pos_init (&pp_array, sheet->workbook, sheet, r->start.col, r->start.row);
if ((texpr = gnm_expr_parse_str
(expr_txt, &pp_array, GNM_EXPR_PARSE_DEFAULT,
sheet_get_conventions (sheet), NULL)) == NULL)
result = WBC_EDIT_ACCEPT_RANGE;
}
/* We need to save the information that we will temporarily overwrite */
/* We then assign the information. No need to worry about formatting */
/* Finally we can check the validation! */
switch (result) {
case (WBC_EDIT_ACCEPT_RANGE): {
GSList *l;
for (l = selection; l != NULL; l = l->next) {
GnmRange *r = l->data;
u = go_undo_combine (u, clipboard_copy_range_undo (sheet, r));
}
for (l = selection; l != NULL; l = l->next) {
GnmRange *r = l->data;
/* We do this separately since there may be overlap between ranges */
sheet_range_set_text (&pp, r, txt);
valid = gnm_validation_eval_range (wbc, sheet, &sv->edit_pos, r,
showed_dialog);
if (valid != GNM_VALIDATION_STATUS_VALID)
break;
}
break;
}
case (WBC_EDIT_ACCEPT_ARRAY): {
GnmRange *r = selection->data;
u = go_undo_combine (u, clipboard_copy_range_undo (sheet, r));
if (texpr) {
gnm_expr_top_ref (texpr);
gnm_cell_set_array_formula (sheet,
r->start.col, r->start.row,
r->end.col, r->end.row,
texpr);
sheet_region_queue_recalc (sheet, r);
}
valid = gnm_validation_eval_range (wbc, sheet, &sv->edit_pos, r,
showed_dialog);
break;
}
case (WBC_EDIT_ACCEPT_WO_AC):
case (WBC_EDIT_ACCEPT): {
GnmRange r;
GnmCell *cell;
range_init_cellpos (&r, &sv->edit_pos);
u = clipboard_copy_range_undo (sheet, &r);
cell = sheet_cell_fetch (sheet,
sv->edit_pos.col,
sv->edit_pos.row);
sheet_cell_set_text (cell, txt, wbcg->edit_line.markup);
valid = gnm_validation_eval (wbc, mstyle, sheet, &sv->edit_pos, showed_dialog);
break;
}
case (WBC_EDIT_REJECT):
default:
/* We should not be able to get here! */
break;
}
range_fragment_free (selection);
/* We need to rebuild the original info first. */
go_undo_undo (u);
g_object_unref (u);
/* Now we can respond to our validation information */
if (valid != GNM_VALIDATION_STATUS_VALID) {
result = WBC_EDIT_REJECT;
if (valid == GNM_VALIDATION_STATUS_INVALID_EDIT) {
gtk_window_set_focus (wbcg_toplevel (wbcg),
(GtkWidget *) wbcg_get_entry (wbcg));
g_free (free_txt);
if (texpr != NULL)
gnm_expr_top_unref (texpr);
return FALSE;
}
} else {
if (result == WBC_EDIT_ACCEPT_ARRAY) {
cmd_area_set_array_expr (wbc, sv, texpr);
} else {
PangoAttrList *res_markup = wbcg->edit_line.markup
? pango_attr_list_copy (wbcg->edit_line.markup)
: NULL;
if (result == WBC_EDIT_ACCEPT)
cmd_set_text (wbc, sheet, &sv->edit_pos, txt, res_markup, TRUE);
else if (result == WBC_EDIT_ACCEPT_WO_AC)
cmd_set_text (wbc, sheet, &sv->edit_pos, txt, res_markup, FALSE);
else
cmd_area_set_text (wbc, sv, txt, res_markup);
if (res_markup)
pango_attr_list_unref (res_markup);
}
}
if (texpr != NULL)
gnm_expr_top_unref (texpr);
g_free (free_txt);
} else {
if (sv == wb_control_cur_sheet_view (wbc)) {
/* Redraw the cell contents in case there was a span */
GnmRange tmp; tmp.start = tmp.end = sv->edit_pos;
sheet_range_bounding_box (sv->sheet, &tmp);
sv_redraw_range (wb_control_cur_sheet_view (wbc), &tmp);
}
/* Reload the entry widget with the original contents */
wb_view_edit_line_set (wbv, wbc);
}
/* Stop editing */
wbcg->editing = FALSE;
wbcg->editing_sheet = NULL;
wbcg->editing_cell = NULL;
if (wbcg->edit_line.guru != NULL) {
GtkWidget *w = wbcg->edit_line.guru;
wbc_gtk_detach_guru (wbcg);
gtk_widget_destroy (w);
}
if (wbcg->edit_line.signal_insert) {
g_signal_handler_disconnect (wbcg_get_entry (wbcg),
wbcg->edit_line.signal_insert);
wbcg->edit_line.signal_insert = 0;
}
if (wbcg->edit_line.signal_delete) {
g_signal_handler_disconnect (wbcg_get_entry (wbcg),
wbcg->edit_line.signal_delete);
wbcg->edit_line.signal_delete = 0;
}
if (wbcg->edit_line.signal_cursor_pos) {
g_signal_handler_disconnect (wbcg_get_entry (wbcg),
wbcg->edit_line.signal_cursor_pos);
wbcg->edit_line.signal_cursor_pos = 0;
}
if (wbcg->edit_line.signal_selection_bound) {
g_signal_handler_disconnect (wbcg_get_entry (wbcg),
wbcg->edit_line.signal_selection_bound);
wbcg->edit_line.signal_selection_bound = 0;
}
if (wbcg->edit_line.cell_attrs != NULL) {
pango_attr_list_unref (wbcg->edit_line.cell_attrs);
wbcg->edit_line.cell_attrs = NULL;
}
if (wbcg->edit_line.markup) {
pango_attr_list_unref (wbcg->edit_line.markup);
wbcg->edit_line.markup = NULL;
}
if (wbcg->edit_line.full_content != NULL) {
pango_attr_list_unref (wbcg->edit_line.full_content);
wbcg->edit_line.full_content = NULL;
}
if (wbcg->edit_line.cur_fmt) {
pango_attr_list_unref (wbcg->edit_line.cur_fmt);
wbcg->edit_line.cur_fmt = NULL;
}
/* set pos to 0, to ensure that if we start editing by clicking on the
* editline at the last position, we'll get the right style feedback */
gtk_editable_set_position ((GtkEditable *) wbcg_get_entry (wbcg), 0);
wb_control_update_action_sensitivity (wbc);
if (!sheet->workbook->during_destruction) {
/* restore focus to original sheet in case things were being selected
* on a different page. Do no go through the view, rangesel is
* specific to the control. */
wb_control_sheet_focus (wbc, sheet);
/* Only the edit sheet has an edit cursor */
scg_edit_stop (wbcg_cur_scg (wbcg));
}
wbcg_auto_complete_destroy (wbcg);
wb_control_style_feedback (wbc, NULL); /* in case markup messed with things */
return TRUE;
}