Ejemplo n.º 1
0
/** 
 *  @brief This function prepares domain info from scan table and 
 *         downloads the domain info command to the FW.
 *
 *  @param pmpriv       A pointer to mlan_private structure
 *
 *  @return             MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
 */
mlan_status
wlan_11d_prepare_dnld_domain_info_cmd(mlan_private * pmpriv)
{
    mlan_status ret = MLAN_STATUS_SUCCESS;
    mlan_adapter *pmadapter = pmpriv->adapter;
    IEEEtypes_CountryInfoFullSet_t *pcountry_full = MNULL;
    t_u32 idx;

    ENTER();

    /* Only valid if 11D is enabled */
    if (wlan_11d_get_state(pmpriv) == ENABLE_11D &&
        pmadapter->num_in_scan_table != 0) {
        for (idx = 0; idx < pmadapter->num_in_scan_table; idx++) {
            pcountry_full = &pmadapter->pscan_table[idx].country_info;

            if (*(pcountry_full->country_code) == 0 ||
                (pcountry_full->len <= COUNTRY_CODE_LEN)) {
                /* Country info not found in the BSS descriptor */
                ret =
                    wlan_11d_update_chan_pwr_table(pmpriv,
                                                   &pmadapter->
                                                   pscan_table[idx]);
            } else {
                /* Country info found in the BSS Descriptor */
                ret =
                    wlan_11d_process_country_info(pmpriv,
                                                  &pmadapter->pscan_table[idx]);
                /* 
                 * If valid country IE found, in BSS, channel table is updated
                 * Send FW command
                 */
                if (ret == MLAN_STATUS_SUCCESS)
                    break;
            }
        }

        /* Check if connected */
        if (pmpriv->media_connected == MTRUE) {
            ret =
                wlan_11d_parse_dnld_countryinfo(pmpriv,
                                                &pmpriv->curr_bss_params.
                                                bss_descriptor);
        } else {
            ret = wlan_11d_parse_dnld_countryinfo(pmpriv, MNULL);
        }
    }

    LEAVE();
    return ret;
}
Ejemplo n.º 2
0
/**
 *  @brief This function prepares domain info from scan table and
 *         downloads the domain info command to the FW.
 *
 *  @param pmpriv       A pointer to mlan_private structure
 *
 *  @return             MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
 */
mlan_status
wlan_11d_prepare_dnld_domain_info_cmd(mlan_private * pmpriv)
{
	mlan_status ret = MLAN_STATUS_SUCCESS;
	mlan_adapter *pmadapter = pmpriv->adapter;
	IEEEtypes_CountryInfoFullSet_t *pcountry_full = MNULL;
	t_u32 idx;

	ENTER();

	/* Only valid if 11D is enabled */
	if (wlan_11d_is_enabled(pmpriv) && pmadapter->num_in_scan_table != 0) {
		for (idx = 0; idx < pmadapter->num_in_scan_table; idx++) {
			pcountry_full =
				&pmadapter->pscan_table[idx].country_info;

			ret = wlan_11d_update_chan_pwr_table(pmpriv,
							     &pmadapter->
							     pscan_table[idx]);

			if (*(pcountry_full->country_code) != 0 &&
			    (pcountry_full->len > COUNTRY_CODE_LEN)) {
				/* Country info found in the BSS Descriptor */
				ret = wlan_11d_process_country_info(pmpriv,
								    &pmadapter->
								    pscan_table
								    [idx]);
			}
		}

		/* Sort parsed_region_chan in ascending channel number */
		wlan_11d_sort_parsed_region_chan(&pmadapter->
						 parsed_region_chan);

		/* Check if connected */
		if (pmpriv->media_connected == MTRUE) {
			ret = wlan_11d_parse_dnld_countryinfo(pmpriv,
							      &pmpriv->
							      curr_bss_params.
							      bss_descriptor);
		} else {
			ret = wlan_11d_parse_dnld_countryinfo(pmpriv, MNULL);
		}
	}

	LEAVE();
	return ret;
}
Ejemplo n.º 3
0
/**
 *  @brief Process an TLV buffer for a pending BSS Join command for
 *         both adhoc and infra networks
 *
 *  The TLV command processing for a BSS join for either adhoc or
 *    infrastructure network is performed with this function.  The
 *    capability bits are inspected for the IBSS flag and the appropriate
 *    local routines are called to setup the necessary TLVs.
 *
 *  Activate 11h functionality in the firmware if the spectrum management
 *    capability bit is found in the network information for the BSS we are
 *    joining.
 *
 *  @param priv          Private driver information structure
 *  @param ppbuffer      Output parameter: Pointer to the TLV output buffer, 
 *                       modified on return to point after the appended 11h TLVs
 *  @param pcap_info     Pointer to the capability info for the BSS to join
 *  @param channel       Channel on which we are joining the BSS
 *  @param p11h_bss_info Pointer to the 11h BSS information for this
 *                       network that was parsed out of the scan response.
 *
 *  @return              Integer number of bytes appended to the TLV output
 *                       buffer (ppbuffer), MLAN_STATUS_FAILURE (-1), 
 *                       or MLAN_STATUS_SUCCESS (0)
 */
int
wlan_11h_process_join(mlan_private * priv,
                      t_u8 ** ppbuffer,
                      IEEEtypes_CapInfo_t * pcap_info,
                      t_u32 channel, wlan_11h_bss_info_t * p11h_bss_info)
{
    int ret = 0;

    ENTER();

    if (priv->media_connected == MTRUE) {
        if (wlan_11h_is_active(priv) == p11h_bss_info->sensed_11h) {
            /* Assume DFS parameters are the same for roaming as long as the
               current & next APs have the same spectrum mgmt capability bit
               setting */
            ret = MLAN_STATUS_SUCCESS;

        } else {
            /* No support for roaming between DFS/non-DFS yet */
            ret = MLAN_STATUS_FAILURE;
        }

        LEAVE();
        return ret;
    }

    if (p11h_bss_info->sensed_11h) {
        /* No use having 11h enabled without 11d enabled */
        wlan_11d_enable(priv, MNULL, ENABLE_11D);
        wlan_11d_parse_dnld_countryinfo(priv, priv->pattempted_bss_desc);

        /* Activate 11h functions in firmware, turns on capability bit */
        wlan_11h_activate(priv, MTRUE);
        pcap_info->spectrum_mgmt = 1;

        if (pcap_info->ibss) {
            PRINTM(MINFO, "11h: Adhoc join: Sensed\n");
            ret = wlan_11h_process_adhoc(priv, ppbuffer, channel,
                                         p11h_bss_info);
        } else {
            PRINTM(MINFO, "11h: Infra join: Sensed\n");
            ret = wlan_11h_process_infra_join(priv, ppbuffer,
                                              channel, p11h_bss_info);
        }
    } else {
        /* Deactivate 11h functions in the firmware */
        wlan_11h_activate(priv, MFALSE);
        pcap_info->spectrum_mgmt = 0;
    }

    LEAVE();

    return ret;
}