Ejemplos de wpa_driver_bsd_set_wpa_ie en C++ (Cpp)

Ejemplo n.º 1

Archivo: driver_bsd.c Proyecto: vutukurikishore/wpa_supplicant

static int
wpa_driver_bsd_associate(void *priv, struct wpa_driver_associate_params *params)
{
	struct wpa_driver_bsd_data *drv = priv;
	struct ieee80211req_mlme mlme;
	int privacy;

	wpa_printf(MSG_DEBUG,
		"%s: ssid '%.*s' wpa ie len %u pairwise %u group %u key mgmt %u"
		, __func__
		, params->ssid_len, params->ssid
		, params->wpa_ie_len
		, params->pairwise_suite
		, params->group_suite
		, params->key_mgmt_suite
	);

	/* XXX error handling is wrong but unclear what to do... */
	if (wpa_driver_bsd_set_wpa_ie(drv, params->wpa_ie, params->wpa_ie_len) < 0)
		return -1;
#ifndef NEW_FREEBSD_MLME_ASSOC
	if (wpa_driver_bsd_set_ssid(drv, params->ssid, params->ssid_len) < 0)
		return -1;
#endif

	privacy = !(params->pairwise_suite == CIPHER_NONE &&
	    params->group_suite == CIPHER_NONE &&
	    params->key_mgmt_suite == KEY_MGMT_NONE &&
	    params->wpa_ie_len == 0);
	wpa_printf(MSG_DEBUG, "%s: set PRIVACY %u", __func__, privacy);

	if (set80211param(drv, IEEE80211_IOC_PRIVACY, privacy) < 0)
		return -1;

	if (params->wpa_ie_len &&
	    set80211param(drv, IEEE80211_IOC_WPA,
			  params->wpa_ie[0] == RSN_INFO_ELEM ? 2 : 1) < 0)
		return -1;

	memset(&mlme, 0, sizeof(mlme));
	mlme.im_op = IEEE80211_MLME_ASSOC;
#ifdef NEW_FREEBSD_MLME_ASSOC
	if (params->ssid != NULL)
		memcpy(mlme.im_ssid, params->ssid, params->ssid_len);
	mlme.im_ssid_len = params->ssid_len;
#endif
	if (params->bssid != NULL)
		memcpy(mlme.im_macaddr, params->bssid, IEEE80211_ADDR_LEN);
	if (set80211var(drv, IEEE80211_IOC_MLME, &mlme, sizeof(mlme)) < 0)
		return -1;
	return 0;
}

Ejemplo n.º 2

Archivo: driver_bsd.c Proyecto: MindShow/amlogic_s905_kernel_merges

static int
wpa_driver_bsd_set_wpa_internal(void *priv, int wpa, int privacy)
{
	int ret = 0;

	wpa_printf(MSG_DEBUG, "%s: wpa=%d privacy=%d",
		__FUNCTION__, wpa, privacy);

	if (!wpa && wpa_driver_bsd_set_wpa_ie(priv, NULL, 0) < 0)
		ret = -1;
	if (set80211param(priv, IEEE80211_IOC_PRIVACY, privacy) < 0)
		ret = -1;
	if (set80211param(priv, IEEE80211_IOC_WPA, wpa) < 0)
		ret = -1;

	return ret;
}

Ejemplo n.º 3

Archivo: driver_dragonfly.c Proyecto: mihaicarabas/dragonfly

static int
wpa_driver_bsd_set_wpa_internal(void *priv, int wpa, int privacy)
{
	struct wpa_driver_bsd_data *drv = priv;
	int ret = 0;

	wpa_printf(MSG_DEBUG, "%s: wpa=%d privacy=%d",
		__func__, wpa, privacy);

	if (!wpa && wpa_driver_bsd_set_wpa_ie(drv, NULL, 0) < 0)
		ret = -1;
	if (set80211param(drv, IEEE80211_IOC_PRIVACY, privacy) < 0)
		ret = -1;
	if (set80211param(drv, IEEE80211_IOC_WPA, wpa) < 0)
		ret = -1;

	return ret;
}

Ejemplo n.º 4

Archivo: driver_bsd.c Proyecto: MindShow/amlogic_s905_kernel_merges

static int
wpa_driver_bsd_associate(void *priv, struct wpa_driver_associate_params *params)
{
	struct bsd_driver_data *drv = priv;
	struct ieee80211req_mlme mlme;
	u32 mode;
	int privacy;
	int ret = 0;

	wpa_printf(MSG_DEBUG,
		"%s: ssid '%.*s' wpa ie len %u pairwise %u group %u key mgmt %u"
		, __func__
		   , (unsigned int) params->ssid_len, params->ssid
		, (unsigned int) params->wpa_ie_len
		, params->pairwise_suite
		, params->group_suite
		, params->key_mgmt_suite
	);

	switch (params->mode) {
	case IEEE80211_MODE_INFRA:
		mode = 0 /* STA */;
		break;
	case IEEE80211_MODE_IBSS:
		mode = IFM_IEEE80211_IBSS;
		break;
	case IEEE80211_MODE_AP:
		mode = IFM_IEEE80211_HOSTAP;
		break;
	default:
		wpa_printf(MSG_ERROR, "%s: unknown operation mode", __func__);
		return -1;
	}
	if (bsd_set_mediaopt(drv, IFM_OMASK, mode) < 0) {
		wpa_printf(MSG_ERROR, "%s: failed to set operation mode",
			   __func__);
		return -1;
	}

	if (params->mode == IEEE80211_MODE_AP) {
		drv->sock_xmit = l2_packet_init(drv->ifname, NULL, ETH_P_EAPOL,
						handle_read, drv, 0);
		if (drv->sock_xmit == NULL)
			return -1;
		drv->is_ap = 1;
		return 0;
	}

	if (wpa_driver_bsd_set_drop_unencrypted(drv, params->drop_unencrypted)
	    < 0)
		ret = -1;
	if (wpa_driver_bsd_set_auth_alg(drv, params->auth_alg) < 0)
		ret = -1;
	/* XXX error handling is wrong but unclear what to do... */
	if (wpa_driver_bsd_set_wpa_ie(drv, params->wpa_ie, params->wpa_ie_len) < 0)
		return -1;

	privacy = !(params->pairwise_suite == CIPHER_NONE &&
	    params->group_suite == CIPHER_NONE &&
	    params->key_mgmt_suite == KEY_MGMT_NONE &&
	    params->wpa_ie_len == 0);
	wpa_printf(MSG_DEBUG, "%s: set PRIVACY %u", __func__, privacy);

	if (set80211param(drv, IEEE80211_IOC_PRIVACY, privacy) < 0)
		return -1;

	if (params->wpa_ie_len &&
	    set80211param(drv, IEEE80211_IOC_WPA,
			  params->wpa_ie[0] == WLAN_EID_RSN ? 2 : 1) < 0)
		return -1;

	os_memset(&mlme, 0, sizeof(mlme));
	mlme.im_op = IEEE80211_MLME_ASSOC;
	if (params->ssid != NULL)
		os_memcpy(mlme.im_ssid, params->ssid, params->ssid_len);
	mlme.im_ssid_len = params->ssid_len;
	if (params->bssid != NULL)
		os_memcpy(mlme.im_macaddr, params->bssid, IEEE80211_ADDR_LEN);
	if (set80211var(drv, IEEE80211_IOC_MLME, &mlme, sizeof(mlme)) < 0)
		return -1;
	return ret;
}