Ejemplos de write_go_p2p_dev_addr en C++ (Cpp)

Ejemplo n.º 1

Archivo: config_file.c Proyecto: GabberBaby/peapwn

static void wpa_config_write_network(FILE *f, struct wpa_ssid *ssid)
{
	int i;

#define STR(t) write_str(f, #t, ssid)
#define INT(t) write_int(f, #t, ssid->t, 0)
#define INTe(t) write_int(f, #t, ssid->eap.t, 0)
#define INT_DEF(t, def) write_int(f, #t, ssid->t, def)
#define INT_DEFe(t, def) write_int(f, #t, ssid->eap.t, def)

	STR(ssid);
	INT(scan_ssid);
	write_bssid(f, ssid);
	write_psk(f, ssid);
	write_proto(f, ssid);
	write_key_mgmt(f, ssid);
	INT_DEF(bg_scan_period, DEFAULT_BG_SCAN_PERIOD);
	write_pairwise(f, ssid);
	write_group(f, ssid);
	write_auth_alg(f, ssid);
	STR(bgscan);
	STR(autoscan);
	STR(scan_freq);
#ifdef IEEE8021X_EAPOL
	write_eap(f, ssid);
	STR(identity);
	STR(anonymous_identity);
	STR(password);
	STR(ca_cert);
	STR(ca_path);
	STR(client_cert);
	STR(private_key);
	STR(private_key_passwd);
	STR(dh_file);
	STR(subject_match);
	STR(altsubject_match);
	STR(domain_suffix_match);
	STR(ca_cert2);
	STR(ca_path2);
	STR(client_cert2);
	STR(private_key2);
	STR(private_key2_passwd);
	STR(dh_file2);
	STR(subject_match2);
	STR(altsubject_match2);
	STR(domain_suffix_match2);
	STR(phase1);
	STR(phase2);
	STR(pcsc);
	STR(pin);
	STR(engine_id);
	STR(key_id);
	STR(cert_id);
	STR(ca_cert_id);
	STR(key2_id);
	STR(pin2);
	STR(engine2_id);
	STR(cert2_id);
	STR(ca_cert2_id);
	INTe(engine);
	INTe(engine2);
	INT_DEF(eapol_flags, DEFAULT_EAPOL_FLAGS);
#endif /* IEEE8021X_EAPOL */
	for (i = 0; i < 4; i++)
		write_wep_key(f, i, ssid);
	INT(wep_tx_keyidx);
	INT(priority);
#ifdef IEEE8021X_EAPOL
	INT_DEF(eap_workaround, DEFAULT_EAP_WORKAROUND);
	STR(pac_file);
	INT_DEFe(fragment_size, DEFAULT_FRAGMENT_SIZE);
#endif /* IEEE8021X_EAPOL */
	INT(mode);
	INT(frequency);
	write_int(f, "proactive_key_caching", ssid->proactive_key_caching, -1);
	INT(disabled);
	INT(peerkey);
#ifdef CONFIG_IEEE80211W
	write_int(f, "ieee80211w", ssid->ieee80211w,
		  MGMT_FRAME_PROTECTION_DEFAULT);
#endif /* CONFIG_IEEE80211W */
	STR(id_str);
#ifdef CONFIG_P2P
	write_go_p2p_dev_addr(f, ssid);
	write_p2p_client_list(f, ssid);
	write_psk_list(f, ssid);
#endif /* CONFIG_P2P */
	INT(dtim_period);
	INT(beacon_int);

#undef STR
#undef INT
#undef INT_DEF
}

Ejemplo n.º 2

static void wpa_config_write_network(FILE *f, struct wpa_ssid *ssid)
{
	int i;

#define STR(t) write_str(f, #t, ssid)
#define INT(t) write_int(f, #t, ssid->t, 0)
#define INTe(t) write_int(f, #t, ssid->eap.t, 0)
#define INT_DEF(t, def) write_int(f, #t, ssid->t, def)
#define INT_DEFe(t, def) write_int(f, #t, ssid->eap.t, def)

	STR(ssid);
	INT(scan_ssid);
	write_bssid(f, ssid);
	write_str(f, "bssid_blacklist", ssid);
	write_str(f, "bssid_whitelist", ssid);
	write_psk(f, ssid);
	INT(mem_only_psk);
	write_proto(f, ssid);
	write_key_mgmt(f, ssid);
	INT_DEF(bg_scan_period, DEFAULT_BG_SCAN_PERIOD);
	write_pairwise(f, ssid);
	write_group(f, ssid);
	write_auth_alg(f, ssid);
	STR(bgscan);
	STR(autoscan);
	STR(scan_freq);
#ifdef IEEE8021X_EAPOL
	write_eap(f, ssid);
	STR(identity);
	STR(anonymous_identity);
	STR(password);
	STR(ca_cert);
	STR(ca_path);
	STR(client_cert);
	STR(private_key);
	STR(private_key_passwd);
	STR(dh_file);
	STR(subject_match);
	STR(altsubject_match);
	STR(domain_suffix_match);
	STR(domain_match);
	STR(ca_cert2);
	STR(ca_path2);
	STR(client_cert2);
	STR(private_key2);
	STR(private_key2_passwd);
	STR(dh_file2);
	STR(subject_match2);
	STR(altsubject_match2);
	STR(domain_suffix_match2);
	STR(domain_match2);
	STR(phase1);
	STR(phase2);
	STR(pcsc);
	STR(pin);
	STR(engine_id);
	STR(key_id);
	STR(cert_id);
	STR(ca_cert_id);
	STR(key2_id);
	STR(pin2);
	STR(engine2_id);
	STR(cert2_id);
	STR(ca_cert2_id);
	INTe(engine);
	INTe(engine2);
	INT_DEF(eapol_flags, DEFAULT_EAPOL_FLAGS);
	STR(openssl_ciphers);
	INTe(erp);
#endif /* IEEE8021X_EAPOL */
	for (i = 0; i < 4; i++)
		write_wep_key(f, i, ssid);
	INT(wep_tx_keyidx);
	INT(priority);
#ifdef IEEE8021X_EAPOL
	INT_DEF(eap_workaround, DEFAULT_EAP_WORKAROUND);
	STR(pac_file);
	INT_DEFe(fragment_size, DEFAULT_FRAGMENT_SIZE);
	INTe(ocsp);
	INT_DEFe(sim_num, DEFAULT_USER_SELECTED_SIM);
#endif /* IEEE8021X_EAPOL */
	INT(mode);
	INT(no_auto_peer);
	INT(frequency);
	INT(fixed_freq);
#ifdef CONFIG_ACS
	INT(acs);
#endif /* CONFIG_ACS */
	write_int(f, "proactive_key_caching", ssid->proactive_key_caching, -1);
	INT(disabled);
	INT(peerkey);
	INT(mixed_cell);
	INT(max_oper_chwidth);
	INT(pbss);
#ifdef CONFIG_IEEE80211W
	write_int(f, "ieee80211w", ssid->ieee80211w,
		  MGMT_FRAME_PROTECTION_DEFAULT);
#endif /* CONFIG_IEEE80211W */
	STR(id_str);
#ifdef CONFIG_P2P
	write_go_p2p_dev_addr(f, ssid);
	write_p2p_client_list(f, ssid);
	write_psk_list(f, ssid);
#endif /* CONFIG_P2P */
	INT(ap_max_inactivity);
	INT(dtim_period);
	INT(beacon_int);
#ifdef CONFIG_MACSEC
	INT(macsec_policy);
#endif /* CONFIG_MACSEC */
#ifdef CONFIG_HS20
	INT(update_identifier);
#endif /* CONFIG_HS20 */
	write_int(f, "mac_addr", ssid->mac_addr, -1);
#ifdef CONFIG_MESH
	STR(mesh_basic_rates);
	INT_DEF(dot11MeshMaxRetries, DEFAULT_MESH_MAX_RETRIES);
	INT_DEF(dot11MeshRetryTimeout, DEFAULT_MESH_RETRY_TIMEOUT);
	INT_DEF(dot11MeshConfirmTimeout, DEFAULT_MESH_CONFIRM_TIMEOUT);
	INT_DEF(dot11MeshHoldingTimeout, DEFAULT_MESH_HOLDING_TIMEOUT);
#endif /* CONFIG_MESH */
	INT(wpa_ptk_rekey);
	INT(ignore_broadcast_ssid);
#ifdef CONFIG_HT_OVERRIDES
	INT_DEF(disable_ht, DEFAULT_DISABLE_HT);
	INT_DEF(disable_ht40, DEFAULT_DISABLE_HT40);
	INT_DEF(disable_sgi, DEFAULT_DISABLE_SGI);
	INT_DEF(disable_ldpc, DEFAULT_DISABLE_LDPC);
	INT(ht40_intolerant);
	INT_DEF(disable_max_amsdu, DEFAULT_DISABLE_MAX_AMSDU);
	INT_DEF(ampdu_factor, DEFAULT_AMPDU_FACTOR);
	INT_DEF(ampdu_density, DEFAULT_AMPDU_DENSITY);
	STR(ht_mcs);
#endif /* CONFIG_HT_OVERRIDES */
#ifdef CONFIG_VHT_OVERRIDES
	INT(disable_vht);
	INT(vht_capa);
	INT(vht_capa_mask);
	INT_DEF(vht_rx_mcs_nss_1, -1);
	INT_DEF(vht_rx_mcs_nss_2, -1);
	INT_DEF(vht_rx_mcs_nss_3, -1);
	INT_DEF(vht_rx_mcs_nss_4, -1);
	INT_DEF(vht_rx_mcs_nss_5, -1);
	INT_DEF(vht_rx_mcs_nss_6, -1);
	INT_DEF(vht_rx_mcs_nss_7, -1);
	INT_DEF(vht_rx_mcs_nss_8, -1);
	INT_DEF(vht_tx_mcs_nss_1, -1);
	INT_DEF(vht_tx_mcs_nss_2, -1);
	INT_DEF(vht_tx_mcs_nss_3, -1);
	INT_DEF(vht_tx_mcs_nss_4, -1);
	INT_DEF(vht_tx_mcs_nss_5, -1);
	INT_DEF(vht_tx_mcs_nss_6, -1);
	INT_DEF(vht_tx_mcs_nss_7, -1);
	INT_DEF(vht_tx_mcs_nss_8, -1);
#endif /* CONFIG_VHT_OVERRIDES */

#undef STR
#undef INT
#undef INT_DEF
}

Ejemplo n.º 3

static void wpa_config_write_network(FILE *f, struct wpa_ssid *ssid)
{
	int i;

#define STR(t) write_str(f, #t, ssid)
#define INT(t) write_int(f, #t, ssid->t, 0)
#define INTe(t) write_int(f, #t, ssid->eap.t, 0)
#define INT_DEF(t, def) write_int(f, #t, ssid->t, def)
#define INT_DEFe(t, def) write_int(f, #t, ssid->eap.t, def)

	STR(ssid);
	INT(scan_ssid);
#ifdef CONFIG_WAPI_SUPPORT  
    if ((ssid->proto & WPA_PROTO_WAPI)!=0){
        /*WAPI Case need to place proto type to network setting header!!!*/
        /*We will use proto to decide the seting if WAPI setting*/
        write_proto(f, ssid);
        write_bssid(f, ssid);
    		write_psk(f, ssid);
    }
    else {
	write_bssid(f, ssid);
	write_psk(f, ssid);
	write_proto(f, ssid);
    }
#else
	write_bssid(f, ssid);
	write_psk(f, ssid);
	write_proto(f, ssid);
#endif
	write_key_mgmt(f, ssid);
	INT_DEF(bg_scan_period, DEFAULT_BG_SCAN_PERIOD);
	write_pairwise(f, ssid);
	write_group(f, ssid);
	write_auth_alg(f, ssid);
	STR(bgscan);
	STR(autoscan);
	STR(scan_freq);
#ifdef IEEE8021X_EAPOL
	write_eap(f, ssid);
	STR(identity);
	STR(anonymous_identity);
	STR(password);
	STR(ca_cert);
	STR(ca_path);
	STR(client_cert);
	STR(private_key);
	STR(private_key_passwd);
#ifdef CONFIG_RILD_FUNCS
	STR(sim_slot);
	STR(imsi);
#endif
	STR(dh_file);
	STR(subject_match);
	STR(altsubject_match);
	STR(domain_suffix_match);
	STR(ca_cert2);
	STR(ca_path2);
	STR(client_cert2);
	STR(private_key2);
	STR(private_key2_passwd);
	STR(dh_file2);
	STR(subject_match2);
	STR(altsubject_match2);
	STR(domain_suffix_match2);
	STR(phase1);
	STR(phase2);
	STR(pcsc);
	STR(pin);
	STR(engine_id);
	STR(key_id);
	STR(cert_id);
	STR(ca_cert_id);
	STR(key2_id);
	STR(pin2);
	STR(engine2_id);
	STR(cert2_id);
	STR(ca_cert2_id);
	INTe(engine);
	INTe(engine2);
	INT_DEF(eapol_flags, DEFAULT_EAPOL_FLAGS);
#endif /* IEEE8021X_EAPOL */
	for (i = 0; i < 4; i++)
		write_wep_key(f, i, ssid);
	INT(wep_tx_keyidx);
	INT(priority);
#ifdef IEEE8021X_EAPOL
	INT_DEF(eap_workaround, DEFAULT_EAP_WORKAROUND);
	STR(pac_file);
	INT_DEFe(fragment_size, DEFAULT_FRAGMENT_SIZE);
	INTe(ocsp);
	INT_DEFe(sim_num, DEFAULT_USER_SELECTED_SIM);
#endif /* IEEE8021X_EAPOL */
	INT(mode);
	INT(frequency);
	write_int(f, "proactive_key_caching", ssid->proactive_key_caching, -1);
	INT(disabled);
	INT(peerkey);
#ifdef CONFIG_IEEE80211W
	write_int(f, "ieee80211w", ssid->ieee80211w,
		  MGMT_FRAME_PROTECTION_DEFAULT);
#endif /* CONFIG_IEEE80211W */
	STR(id_str);
#ifdef CONFIG_P2P
	write_go_p2p_dev_addr(f, ssid);
	write_p2p_client_list(f, ssid);
	write_psk_list(f, ssid);
#endif /* CONFIG_P2P */
	INT(dtim_period);
	INT(beacon_int);
#ifdef CONFIG_MACSEC
	INT(macsec_policy);
#endif /* CONFIG_MACSEC */
#ifdef CONFIG_HS20
	INT(update_identifier);
#endif /* CONFIG_HS20 */
#ifdef CONFIG_MTK_PRESET_SSID
	INT(read_only);
#endif
#undef STR
#undef INT
#undef INT_DEF
}