/**
* int reset_and_enable_port(const u8 port)
*
* @brief Reset port and make enable status the specific port
*
* @param [IN] port : port number
*
* @return USB_ERR_SUCCESS : If success \n
* USB_ERR_FAIL : If call fail \n
*
* @remark
*
*/
int reset_and_enable_port(const u8 port)
{
hprt_t hprt;
u32 count = 0;
u32 max_error_count = 1000;
mdelay(50);
hprt.d32 = read_reg_32(HPRT);
if(!hprt.b.prtena)
{
hprt.b.prtrst = 1; // drive reset
write_reg_32(HPRT, hprt.d32);
mdelay(80);
hprt.b.prtrst = 0;
write_reg_32(HPRT, hprt.d32);
mdelay(60);
do
{
hprt.d32 = read_reg_32(HPRT);
udelay(10);
if(count > max_error_count)
{
otg_dbg(OTG_DBG_ROOTHUB,"Port Reset Fail : HPRT : 0x%x\n",(u16)read_reg_32(HPRT));
return USB_ERR_FAIL;
}
count++;
}while(!hprt.b.prtena);
}
return USB_ERR_SUCCESS;
}
/*Internal function of isr */
static void process_port_intr(struct usb_hcd *hcd)
{
hprt_t hprt; /* by ss1, clear_hprt; */
struct sec_otghost *otghost = hcd_to_sec_otghost(hcd);
hprt.d32 = read_reg_32(HPRT);
otg_dbg(OTG_DBG_ISR, "Port Interrupt() : HPRT = 0x%x\n", hprt.d32);
if (hprt.b.prtconndet) {
otg_dbg(true, "detect connection");
otghost->port_flag.b.port_connect_status_change = 1;
if (hprt.b.prtconnsts)
otghost->port_flag.b.port_connect_status = 1;
/* wake_lock(&otghost->wake_lock); */
}
if (hprt.b.prtenchng) {
otg_dbg(true, "port enable/disable changed\n");
otghost->port_flag.b.port_enable_change = 1;
// kevinh - it seems the hw implicitly disables the interface on unplug, so mark that we are unplugged
if(!hprt.b.prtconnsts) {
otghost->port_flag.b.port_connect_status_change = 1;
otghost->port_flag.b.port_connect_status = 0;
}
}
if (hprt.b.prtovrcurrchng) {
otg_dbg(true, "over current condition is changed\n");
if (hprt.b.prtovrcurract) {
otg_dbg(true, "port_over_current_change = 1\n");
otghost->port_flag.b.port_over_current_change = 1;
} else {
otghost->port_flag.b.port_over_current_change = 0;
}
/* defer otg power control into a kernel thread */
queue_work(otghost->wq, &otghost->work);
}
hprt.b.prtena = 0; /* prtena를 writeclear시키면 안됨. */
/* hprt.b.prtpwr = 0; */
hprt.b.prtrst = 0;
hprt.b.prtconnsts = 0;
write_reg_32(HPRT, hprt.d32);
}
/**
* int root_hub_feature(const u8 port,
* const u16 type_req,
* const u16 feature,
* void* buf)
*
* @brief Get port change bitmap information
*
* @param [IN] port : port number
* [IN] type_req : request type of hub feature as usb 2.0 spec
* [IN] feature : hub feature as usb 2.0 spec
* [OUT] status : buffer to store results
*
* @return USB_ERR_SUCCESS : If success \n
* USB_ERR_FAIL : If call fail \n
*
* @remark
*
*/
__inline__ int root_hub_feature(const u8 port,
const u16 type_req,
const u16 feature,
void *buf)
{
int retval = USB_ERR_SUCCESS;
usb_hub_descriptor_t *desc = NULL;
u32 port_status = 0;
hprt_t hprt = {.d32 = 0};
switch (type_req)
{
case ClearHubFeature:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearHubFeature\n");
switch (feature)
{
case C_HUB_LOCAL_POWER:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearHubFeature -C_HUB_LOCAL_POWER \n");
break;
case C_HUB_OVER_CURRENT:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearHubFeature -C_HUB_OVER_CURRENT \n");
/* Nothing required here */
break;
default:
retval = USB_ERR_FAIL;
}
break;
case ClearPortFeature:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearPortFeature\n");
switch (feature)
{
case USB_PORT_FEAT_ENABLE:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearPortFeature -USB_PORT_FEAT_ENABLE \n");
hprt.b.prtena = 1;
update_reg_32(HPRT, hprt.d32);
break;
case USB_PORT_FEAT_SUSPEND:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearPortFeature -USB_PORT_FEAT_SUSPEND \n");
bus_resume();
break;
case USB_PORT_FEAT_POWER:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearPortFeature -USB_PORT_FEAT_POWER \n");
hprt.b.prtpwr = 1;
clear_reg_32(HPRT, hprt.d32);
break;
case USB_PORT_FEAT_INDICATOR:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearPortFeature -USB_PORT_FEAT_INDICATOR \n");
/* Port inidicator not supported */
break;
case USB_PORT_FEAT_C_CONNECTION:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearPortFeature -USB_PORT_FEAT_C_CONNECTION \n");
/* Clears drivers internal connect status change
* flag */
port_flag.b.port_connect_status_change = 0;
break;
case USB_PORT_FEAT_C_RESET:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearPortFeature -USB_PORT_FEAT_C_RESET \n");
/* Clears the driver's internal Port Reset Change
* flag */
port_flag.b.port_reset_change = 0;
break;
case USB_PORT_FEAT_C_ENABLE:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearPortFeature -USB_PORT_FEAT_C_ENABLE \n");
/* Clears the driver's internal Port
* Enable/Disable Change flag */
port_flag.b.port_enable_change = 0;
break;
case USB_PORT_FEAT_C_SUSPEND:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearPortFeature -USB_PORT_FEAT_C_SUSPEND \n");
/* Clears the driver's internal Port Suspend
* Change flag, which is set when resume signaling on
* the host port is complete */
port_flag.b.port_suspend_change = 0;
break;
case USB_PORT_FEAT_C_OVER_CURRENT:
otg_dbg(OTG_DBG_ROOTHUB,"case ClearPortFeature -USB_PORT_FEAT_C_OVER_CURRENT \n");
port_flag.b.port_over_current_change = 0;
break;
default:
retval = USB_ERR_FAIL;
}
break;
case GetHubDescriptor:
otg_dbg(OTG_DBG_ROOTHUB,"case GetHubDescriptor\n");
desc = (usb_hub_descriptor_t *)buf;
desc->desc_length = 9;
desc->desc_type = 0x29;
desc->port_number = 1;
desc->hub_characteristics = 0x08;
desc->power_on_to_power_good = 1;
desc->hub_control_current = 0;
desc->bitmap[0] = 0;
desc->bitmap[1] = 0xff;
break;
case GetHubStatus:
otg_dbg(OTG_DBG_ROOTHUB,"case GetHubStatus\n");
otg_mem_set(buf, 0, 4);
break;
case GetPortStatus:
//otg_dbg(OTG_DBG_ROOTHUB_KH,"case GetPortStatus\n");
if (port_flag.b.port_connect_status_change)
port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
if (port_flag.b.port_enable_change)
port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
if (port_flag.b.port_suspend_change)
port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
if (port_flag.b.port_reset_change)
port_status|= (1 << USB_PORT_FEAT_C_RESET);
if (port_flag.b.port_over_current_change)
port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
if (!port_flag.b.port_connect_status)
{
//
// The port is disconnected, which means the core is
// either in device mode or it soon will be. Just
// return 0's for the remainder of the port status
// since the port register can't be read if the core
// is in device mode.
*((__le32*)buf) = cpu_to_le32(port_status);
break;
}
hprt.d32 = read_reg_32(HPRT);
if (hprt.b.prtconnsts)
port_status|= (1 << USB_PORT_FEAT_CONNECTION);
if (hprt.b.prtena)
port_status |= (1 << USB_PORT_FEAT_ENABLE);
if (hprt.b.prtsusp)
port_status |= (1 << USB_PORT_FEAT_SUSPEND);
if (hprt.b.prtovrcurract)
port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
if (hprt.b.prtrst)
port_status |= (1 << USB_PORT_FEAT_RESET);
if (hprt.b.prtpwr)
port_status |= (1 << USB_PORT_FEAT_POWER);
if (hprt.b.prtspd == 0)
port_status |= (1 << USB_PORT_FEAT_HIGHSPEED);
else if (hprt.b.prtspd == 2)
port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
if (hprt.b.prttstctl)
port_status |= (1 << USB_PORT_FEAT_TEST);
*((__le32*)buf) = cpu_to_le32(port_status);
break;
case SetHubFeature:
otg_dbg(OTG_DBG_ROOTHUB,"case SetHubFeature\n");
/* No HUB features supported */
break;
case SetPortFeature:
otg_dbg(OTG_DBG_ROOTHUB,"case SetPortFeature\n");
if (!port_flag.b.port_connect_status) {
/*
* The port is disconnected, which means the core is
* either in device mode or it soon will be. Just
* return without doing anything since the port
* register can't be written if the core is in device
* mode.
*/
break;
}
switch (feature)
{
case USB_PORT_FEAT_SUSPEND:
otg_dbg(OTG_DBG_ROOTHUB,"case SetPortFeature -USB_PORT_FEAT_SUSPEND \n");
bus_suspend();
break;
case USB_PORT_FEAT_POWER:
otg_dbg(OTG_DBG_ROOTHUB,"case SetPortFeature -USB_PORT_FEAT_POWER \n");
hprt.d32 = read_reg_32(HPRT);
if(!hprt.b.prtpwr)
{
//hprt.d32 = 0;
hprt.b.prtpwr = 1;
write_reg_32(HPRT, hprt.d32);
}
break;
case USB_PORT_FEAT_RESET:
otg_dbg(OTG_DBG_ROOTHUB,"case SetPortFeature -USB_PORT_FEAT_RESET \n");
retval = reset_and_enable_port(port);
break;
case USB_PORT_FEAT_INDICATOR:
otg_dbg(OTG_DBG_ROOTHUB,"case USB_PORT_FEAT_INDICATOR\n");
break;
default :
retval = USB_ERR_FAIL;
break;
}
break;
default:
retval = USB_ERR_FAIL;
otg_dbg(OTG_DBG_ROOTHUB,"root_hub_feature() Function Error\n");
break;
}
if(retval != USB_ERR_SUCCESS)
retval = USB_ERR_FAIL;
return retval;
}
/**
* void bus_suspend(void)
*
* @brief Make suspend status when this platform support PM Mode
*
* @param None
*
* @return None
*
* @remark
*
*/
void bus_suspend(void)
{
hprt_t hprt;
pcgcctl_t pcgcctl;
hprt.d32 = 0;
pcgcctl.d32 = 0;
hprt.b.prtsusp = 1;
update_reg_32(HPRT, hprt.d32);
pcgcctl.b.pwrclmp = 1;
update_reg_32(PCGCCTL,pcgcctl.d32);
udelay(1);
pcgcctl.b.rstpdwnmodule = 1;
update_reg_32(PCGCCTL,pcgcctl.d32);
udelay(1);
pcgcctl.b.stoppclk = 1;
update_reg_32(PCGCCTL,pcgcctl.d32);
udelay(1);
}
