Ejemplo n.º 1
0
static void write_at_offset(const char *key, const void *buffer,
                            int buf_len, unsigned int sector_offset)
{
    int key_len = strlen(key) + 1;
    unsigned int record_size = key_len + buf_len + sizeof(record_size);
    unsigned int flash_addr = (unsigned int)STORAGE_ADDRESS + sector_offset;

    write_to_flash(flash_addr, (unsigned char *)&record_size, sizeof(record_size));
    write_to_flash(flash_addr+sizeof(record_size), (unsigned char *)key, key_len);
    write_to_flash(flash_addr+sizeof(record_size)+key_len, buffer, buf_len);
    flush_cpu_dcache();
}
Ejemplo n.º 2
0
//Writes new serial number to flash space from ptr
void write_serialnumber(char* new_serialnumber)
{
	int i;
	
	char new_settings[256];

	char *current_settings_ptr;
	current_settings_ptr = (char*)SETTINGS_ADDR_L;
	
	//Read the current settings
	for(i = 0 ; i < 256 ; i++)
	{
		new_settings[i] = current_settings_ptr[i];
	}
	
	//Splice in new serial number
	//Move 16 bytes of serial number data to settings array
	for(i = 0 ; i < 16 ; i++)
	{
		new_settings[i + (256-16)] = new_serialnumber[i];
	}
	
	//Record settings to memory
	write_to_flash(new_settings);
}
Ejemplo n.º 3
0
//Writes a blank record to flash
void erase_settings(void)
{
	int i;
	
	char new_settings[256];

	//Read the current settings
	for(i = 0 ; i < 256 ; i++)
	{
		new_settings[i] = 0xFF;
	}
	
	//Record settings to memory
	write_to_flash(new_settings);
}
Ejemplo n.º 4
0
//Writes a given option setting to flash
void write_option(int spot_number, unsigned char user_byte)
{
	int i;
	
	char new_settings[256];

	char *current_settings_ptr;
	current_settings_ptr = (char*)USER_SETTING_START;
	
	//Read the current settings
	for(i = 0 ; i < 256 ; i++)
	{
		new_settings[i] = current_settings_ptr[i];
	}
	
	//Splice in new byte
	new_settings[spot_number] = user_byte;
	
	//Record settings to memory
	write_to_flash(new_settings);
}
Ejemplo n.º 5
0
static int secure_writer_monitor(void *arg)
{
	struct secure_monitor_arg *parg = (struct secure_monitor_arg*)arg;
	unsigned char *pfbuf = parg->pfbuf;	
	unsigned long flags;
	
	NS_SHARE_MEM_HEAD *pshead = (NS_SHARE_MEM_HEAD*)(parg->psbuf+SHARE_MEM_HEAD_OFFSET);
	unsigned char *psdata = parg->psbuf + SHARE_MEM_DATA_OFFSET;
	bool w_busy = false;	
		
	while(1){
			if(w_busy){
				write_to_flash(pfbuf, FLASH_BUF_SIZE);
				w_busy=false;
			}						
			//arch_local_irq_save();
			local_fiq_disable();
			lock_mutex(&(pshead->cmdlock));						
			if(pshead->cmd == SHARE_MEM_CMD_WRITE){				
				memcpy(pfbuf, psdata, FLASH_BUF_SIZE);
				pshead->cmd=SHARE_MEM_CMD_FREE;
				w_busy = true;
				printk("************kernel detect write flag*****\n");
			}
			unlock_mutex(&(pshead->cmdlock));		
			//arch_local_irq_restore(flags);
			local_fiq_enable();			
			
			if(!w_busy){				
				if(kthread_should_stop())
					break;
				else
					msleep(200);			
			}
	}	
	return 0;
}
Ejemplo n.º 6
0
static void run_routine(void)
{
	static uint8_t running_queue_index = 0;
	static  uint8_t beat_count = 0 ;  
	static uint8_t rever_heartled = 0 ;
	uint16_t co2_temp ;
	if(task_ready_num == 0)
	{
		return;
	}

	if(running_queue_index == TASK_END)
	{
		running_queue_index = 0;
	}

	switch(ready_task_queue[running_queue_index])
	{
		case TASK_OUTPUT:
			Press_Task();
		break;
		case TASK_HUM:
			HTU21_TASK();
		break;		
		case TASK_AQ:
			AD1_CreateSampleGroup(AdDataPTR, (LDD_ADC_TSample *)&ADC_AQ_Sample, 1U);
			AD1_StartSingleMeasurement(AdDataPTR);
			while(AD1_GetMeasurementCompleteStatus(AdDataPTR) != TRUE); 
			AD1_GetMeasuredValues(AdDataPTR, (LDD_TData *)&modbus.Aq_Ad)	;
			aq_analog_input = modbus.Aq_Ad /64;		
			check_Air_Quality();
//		if(rever_heartled)
//		{
//			GPIO1_SetFieldValue(GPIO1_Ptr, AQ_CTR, 1);
//			rever_heartled = 0 ;
//		}
//		else
//		{
//			GPIO1_ClearFieldBits(GPIO1_Ptr, AQ_CTR, 1);
//			rever_heartled = 1 ;
//		}
		break;
		case TASK_RTD:
			AD1_CreateSampleGroup(AdDataPTR, (LDD_ADC_TSample *)&ADC_TEMP_Sample, 1U);
			AD1_StartSingleMeasurement(AdDataPTR);
			while(AD1_GetMeasurementCompleteStatus(AdDataPTR) != TRUE); 
			AD1_GetMeasuredValues(AdDataPTR, (LDD_TData *)&modbus.Rtd_Ad)	;
		break;
		case TASK_FLASH: 
		write_to_flash();
		break;
		case TASK_CO2:
			if(modbus.co2_fac_cus_table == 0)
			{
			  co2_temp= Calculate(modbus.Co2_Ad, modbus.co2_fac_ad, modbus.co2_fac_ppm, modbus.co2_fac_point);
			  modbus.Co2= Filter(co2_temp ) ;
			}
////		else if(modbus.co2_fac_cus_table == 1) 
////			modbus.Co2 = Calculate(modbus.Co2_Ad, modbus.co2_cus_ad, modbus.co2_cus_ppm, modbus.co2_cus_point);	
		break;
		default:
		break;
	}
	reset_task_tick(ready_task_queue[running_queue_index]);
	running_queue_index++;
	task_ready_num--;
}