bool wxGISServer::SetupLoc(const wxString &sLoc, const wxString &sLocPath)
{
wxLogVerbose(_("wxGISServer: Initialize locale"));
// if(m_pszOldLocale != NULL)
//setlocale(LC_NUMERIC, m_pszOldLocale);
//wxDELETE(m_pszOldLocale);
wxDELETE(m_pLocale);
//init locale
if ( !sLoc.IsEmpty() )
{
int iLocale(0);
const wxLanguageInfo* loc_info = wxLocale::FindLanguageInfo(sLoc);
if(loc_info != NULL)
{
iLocale = loc_info->Language;
wxLogMessage(_("wxGISServer: Language is set to %s"), loc_info->Description.c_str());
}
// don't use wxLOCALE_LOAD_DEFAULT flag so that Init() doesn't return
// false just because it failed to load wxstd catalog
m_pLocale = new wxLocale();
if ( !m_pLocale->Init(iLocale) )
{
wxLogError(wxT("wxGISServer: This language is not supported by the system."));
return false;
}
}
//m_locale.Init(wxLANGUAGE_DEFAULT);
// normally this wouldn't be necessary as the catalog files would be found
// in the default locations, but when the program is not installed the
// catalogs are in the build directory where we wouldn't find them by
// default
wxString sLocalePath = sLocPath + wxFileName::GetPathSeparator() + sLoc;
if(wxDirExists(sLocalePath))
{
wxLocale::AddCatalogLookupPathPrefix(sLocalePath);
// Initialize the catalogs we'll be using
//load multicat from locale
wxArrayString trans_arr;
wxDir::GetAllFiles(sLocalePath, &trans_arr, wxT("*.mo"));
for(size_t i = 0; i < trans_arr.size(); ++i)
{
wxFileName name(trans_arr[i]);
m_pLocale->AddCatalog(name.GetName());
}
// this catalog is installed in standard location on Linux systems and
// shows that you may make use of the standard message catalogs as well
//
// if it's not installed on your system, it is just silently ignored
#ifdef __LINUX__
{
wxLogNull noLog;
m_pLocale->AddCatalog(_T("fileutils"));
}
#endif
}
//support of dot in doubles and floats
//m_pszOldLocale = strdup(setlocale(LC_NUMERIC, NULL));
// if( setlocale(LC_NUMERIC,"C") == NULL )
// m_pszOldLocale = NULL;
return true;
}
bool MoveDirWithFilebackupRename(wxString from, wxString to, bool backup, bool silent)
{
// first make sure that the source dir exists
if (!wxDir::Exists(from)) {
ErrorMsgBox(from + _T(" does not exist. Can not copy directory."), silent);
return false;
}
if (from == to) {
ErrorMsgBox(_T("Cannot copy: source == destination: ") + from, silent);
return false;
}
if (from.empty() || to.empty()) {
ErrorMsgBox(_T("Cannot copy empty directory"), silent);
return false;
}
SafeMkdir(to);
wxString sep = wxFileName::GetPathSeparator();
wxDir dir(from);
wxString filename;
if (!dir.GetFirst(&filename)) {
return false;
}
// append a slash if there is not one (for easier parsing)
// because who knows what people will pass to the function.
if (!to.EndsWith(sep)) {
to += sep;
}
// for both dirs
if (!from.EndsWith(sep)) {
from += sep;
}
do {
const wxString srcfile = from + filename;
const wxString dstfile = to + filename;
if (wxDirExists(srcfile)) { //check if srcfile is a directory
MoveDirWithFilebackupRename(srcfile, dstfile, false, silent); //no backup in subdirs
} else {
//if files exists move it to backup, this way we can use this func on windows to replace 'active' files
if (backup && wxFileExists(dstfile)) {
const wxString backupfile = dstfile + _T(".old");
if (!MoveFile(dstfile, backupfile)) {
ErrorMsgBox(wxString::Format(_T("could not rename %s to %s. copydir aborted"), dstfile.c_str(), backupfile.c_str()), silent);
return false;
}
}
//do the actual copy
if (!wxCopyFile(srcfile, dstfile, true)) {
ErrorMsgBox(wxString::Format(_T("could not copy %s to %s, copydir aborted"), srcfile, dstfile), silent);
return false;
}
}
} while (dir.GetNext(&filename));
return true;
}
void RegisterVSTEffects()
{
PluginManager & pm = PluginManager::Get();
pm.Open();
if (gPrefs->Read(wxT("/VST/Rescan"), (long) false) != false) {
pm.PurgeType(VSTPLUGINTYPE);
gPrefs->Write(wxT("/VST/Rescan"), false);
}
if (!pm.HasType(VSTPLUGINTYPE)) {
pm.Close();
VSTEffect::Scan();
pm.Open();
}
EffectManager & em = EffectManager::Get();
wxString path = pm.GetFirstPlugin(VSTPLUGINTYPE);
while (!path.IsEmpty()) {
#if defined(__WXMAC__)
if (wxDirExists(path)) {
#else
if (wxFileExists(path)) {
#endif
em.RegisterEffect(new VSTEffect(path));
}
path = pm.GetNextPlugin(VSTPLUGINTYPE);
}
pm.Close();
}
///////////////////////////////////////////////////////////////////////////////
//
// VSTEffectDialog
//
///////////////////////////////////////////////////////////////////////////////
class VSTEffectDialog:public wxDialog, XMLTagHandler
{
public:
VSTEffectDialog(wxWindow * parent,
const wxString & title,
VSTEffect *effect,
AEffect *aeffect);
virtual ~VSTEffectDialog();
void RemoveHandler();
void OnIdle(wxIdleEvent & evt);
void OnProgram(wxCommandEvent & evt);
void OnProgramText(wxCommandEvent & evt);
void OnLoad(wxCommandEvent & evt);
void OnSave(wxCommandEvent & evt);
void OnSlider(wxCommandEvent &event);
void OnOk(wxCommandEvent & evt);
void OnCancel(wxCommandEvent & evt);
void OnClose(wxCloseEvent & evt);
void OnPreview(wxCommandEvent & evt);
private:
void DescriptorFrame::save()
{
bool empty=true;
FILE *cadfile_;
FILE *outputfile;
char line[100];
// check unbound components
if (!(noDestinationInfoList.size()==0)) {
empty=false;
wxString message="placements without destination are left. Continue ?";
wxMessageDialog* mess_dialog=new wxMessageDialog(this,message,"Message box",wxYES_NO | wxCENTRE | wxICON_QUESTION, wxDefaultPosition);
int t=mess_dialog->ShowModal();
if (t==wxID_YES)
{
empty=true;
}
mess_dialog->~wxMessageDialog();
}
/** create tomporary directory for zipping the package */
if (!(wxDirExists("meta-inf")))
{
if (!wxMkdir("meta-inf"))
{
wxLogMessage(_T("Unable to create meta-inf directory temporarily"));
}
}
cadfile_=fopen(tmp_file.c_str(),"r");
wxString c_file="meta-inf/";
c_file.Append(cadfile.c_str());
outputfile=fopen(c_file,"w+");
wxString tmp_string;
wxString tmp_before_partit;
wxString tmp_after_partit;
wxString tmp_partit;
// reading the cadfile
while (!feof(cadfile_))
{
fgets(line,100,cadfile_);
tmp_string.Append(line);
}
// erase old partitioning
// divide into two strings
int erase_start=tmp_string.find("<partitioning>");
int erase_end=tmp_string.find("</partitioning>")+15;
tmp_before_partit=tmp_string.Mid(0,erase_start);
tmp_after_partit=tmp_string.Mid(erase_end,wxSTRING_MAXLEN);
tmp_partit=tmp_string.Mid(erase_start,erase_end-erase_start);
tmp_string.Empty();
// put new partitioning
tmp_string.Append(tmp_before_partit);
tmp_string.Append(get_partitioning_str(tmp_partit));
tmp_string.Append(tmp_after_partit);
// write into cad file
if (fputs(tmp_string ,outputfile) > -1)
{
//wxLogMessage(_T(line));
} else {
wxLogMessage(_T("Error writing"));
}
fclose(outputfile);
fclose(cadfile_);
// cadfile into assembly zip
into_zip(c_file.c_str(),file);
// delete tmp_cadfile
wxLogMessage("Save OK");
}
int CProxyParse::RunFromMem( wxString content )
{
char *pBuffer;
//http://www.51proxied.com/http_non_anonymous.html
//wxString path = wxT("f:/work/windows/wxUrlRefresh/data/最新透明HTTP代理服务器.htm");
//wxString path1 = wxT("f:/work/windows/wxUrlRefresh/data/result.xml");
wxString data_path = wxGetCwd() + "/data/";
wxString path1 = data_path + "_tmp.xml";
if (!wxDirExists(data_path))
wxMkdir(data_path);
pBuffer = (char*)calloc(content.Length()+1, 1);
wxStrncpy(pBuffer, content, content.Len()+1);
wxLogMessage("Run Tidy!");
TidyBuffer output;
TidyBuffer errbuf;
int rc = -1;
Bool ok;
TidyDoc tdoc = tidyCreate(); // Initialize "document"
tidyBufInit( &output );
tidyBufInit( &errbuf );
//printf( "Tidying:\t\%s\\n", input );
tidySetCharEncoding(tdoc, "utf8");
ok = tidyOptSetBool( tdoc, TidyXhtmlOut, yes ); // Convert to XHTML
if ( ok )
rc = tidySetErrorBuffer( tdoc, &errbuf ); // Capture diagnostics
if ( rc >= 0 )
rc = tidyParseString( tdoc, pBuffer ); // Parse the input
if ( rc >= 0 )
rc = tidyCleanAndRepair( tdoc ); // Tidy it up!
if ( rc >= 0 )
rc = tidyRunDiagnostics( tdoc ); // Kvetch
if ( rc > 1 ) // If error, force output.
rc = ( tidyOptSetBool(tdoc, TidyForceOutput, yes) ? rc : -1 );
if ( rc >= 0 )
rc = tidySaveBuffer( tdoc, &output ); // Pretty Print
if ( rc >= 0 )
{
#ifdef _DEBUG
//if ( rc > 0 )
// WriteAllToFile("f:/work/windows/wxUrlRefresh/data/error.xml", (char*)errbuf.bp, errbuf.size);
WriteAllToFile(path1, (char*)output.bp, output.size);
#endif
}
else
wxLogError("tidyFail");
tidyBufFree( &output );
tidyBufFree( &errbuf );
tidyRelease( tdoc );
if (pBuffer) free(pBuffer);
wxLogMessage("Fetch data!");
// 解析数据
TiXmlDocument doc(path1);
if (doc.LoadFile())
{
// root
CTiXmlProxyVistor vistor(&m_array);
TiXmlElement *pRoot = doc.RootElement();
pRoot->Accept(&vistor);
}
else
{
wxLogMessage("shit");
return -2;
}
return 0;
}
InstIconList::InstIconList(int width, int height, wxString customIconDirName)
{
if (customIconDirName == wxEmptyString)
customIconDirName = settings->GetIconsDir().GetFullPath();
this->width = width;
this->height = height;
const InstIconDef builtInIcons[] =
{
InstIconDef("default", _("Default icon"), wxMEMORY_IMAGE(grass)),
InstIconDef("grass", _("Grass block"), wxMEMORY_IMAGE(grass)),
InstIconDef("dirt", _("Dirt block"), wxMEMORY_IMAGE(dirt)),
InstIconDef("stone", _("Stone block"), wxMEMORY_IMAGE(stone)),
InstIconDef("planks", _("Planks"), wxMEMORY_IMAGE(planks)),
InstIconDef("iron", _("Solid iron"), wxMEMORY_IMAGE(iron)),
InstIconDef("gold", _("Shiny gold"), wxMEMORY_IMAGE(gold)),
InstIconDef("diamond", _("Diamond!"), wxMEMORY_IMAGE(diamond)),
InstIconDef("tnt", _("TNT"), wxMEMORY_IMAGE(tnt)),
InstIconDef("enderman",_("Enderman"), wxMEMORY_IMAGE(enderman)),
InstIconDef("ftb-logo",_("FTB logo"), wxMEMORY_IMAGE(ftb_logo), wxMEMORY_IMAGE(ftb_logo128)),
InstIconDef("ftb-glow",_("FTB glow"), wxMEMORY_IMAGE(ftb_glow), wxMEMORY_IMAGE(ftb_glow128)),
InstIconDef("infinity",_("Infinity"), wxMEMORY_IMAGE(infinity), wxMEMORY_IMAGE(infinity128)),
InstIconDef("netherstar",_("Nether Star"), wxMEMORY_IMAGE(netherstar), wxMEMORY_IMAGE(netherstar128)),
InstIconDef("creeper",_("Creeper"), wxMEMORY_IMAGE(creeper), wxMEMORY_IMAGE(creeper128)),
InstIconDef("square creeper",_("Square creeper"), wxMEMORY_IMAGE(squarecreeper), wxMEMORY_IMAGE(squarecreeper128)),
InstIconDef("skeleton",_("Skeleton"), wxMEMORY_IMAGE(skeleton), wxMEMORY_IMAGE(skeleton128)),
InstIconDef("gear",_("Golden gear"), wxMEMORY_IMAGE(gear), wxMEMORY_IMAGE(gear128)),
InstIconDef("magitech",_("Magitech"), wxMEMORY_IMAGE(magitech), wxMEMORY_IMAGE(magitech128)),
InstIconDef("enderpearl",_("Enderpearl"), wxMEMORY_IMAGE(enderpearl), wxMEMORY_IMAGE(enderpearl128)),
InstIconDef("herobrine",_("Herobrine"), wxMEMORY_IMAGE(herobrine), wxMEMORY_IMAGE(herobrine128)),
InstIconDef("meat",_("The Meat"), wxMEMORY_IMAGE(meat), wxMEMORY_IMAGE(meat128)),
InstIconDef("chicken",_("Chicken"), wxMEMORY_IMAGE(chicken), wxMEMORY_IMAGE(chicken128)),
InstIconDef("steve",_("Steve"), wxMEMORY_IMAGE(steve), wxMEMORY_IMAGE(steve128)),
InstIconDef("derp",_("Derp"), wxMEMORY_IMAGE(derp)),
};
const int builtInIconCount = sizeof(builtInIcons)/sizeof(InstIconDef);
for (int i = 0; i < builtInIconCount; i++)
{
#ifdef DEBUG_ICONS
if(!builtInIcons[i].image.HasAlpha())
{
wxLogMessage(_("Image %d %s has no alpha."), i, builtInIcons[i].key.c_str() );
}
#endif
wxImage highlightIcon = tintImage(builtInIcons[i].image,wxSystemSettings::GetColour(wxSYS_COLOUR_HIGHLIGHT));
Add(builtInIcons[i].image, highlightIcon, builtInIcons[i].image128, builtInIcons[i].key, builtInIcons[i].name);
}
if (wxDirExists(customIconDirName))
{
wxDir customIconDir(customIconDirName);
if (!customIconDir.IsOpened())
return;
wxString iconFile;
if (customIconDir.GetFirst(&iconFile))
{
do
{
// Check file extensions
bool isAllowedImage = false;
for (int i = 0; i < allowedImgExtensionsCount; i++)
{
if (iconFile.Lower().EndsWith(allowedImgExtensions[i]))
{
isAllowedImage = true;
break;
}
}
if (!isAllowedImage)
continue;
if (!AddFile(Path::Combine(customIconDirName, iconFile)))
{
if(customIconDir.GetNext(&iconFile))
continue;
break;
}
} while (customIconDir.GetNext(&iconFile));
}
}
}
void wxGenericFileDialog::HandleAction( const wxString &fn )
{
if (ignoreChanges)
return;
wxString filename( fn );
if (filename.empty())
{
#ifdef __WXWINCE__
EndModal(wxID_CANCEL);
#endif
return;
}
if (filename == wxT(".")) return;
wxString dir = m_list->GetDir();
// "some/place/" means they want to chdir not try to load "place"
bool want_dir = filename.Last() == wxFILE_SEP_PATH;
if (want_dir)
filename = filename.RemoveLast();
if (filename == wxT(".."))
{
ignoreChanges = true;
m_list->GoToParentDir();
m_list->SetFocus();
UpdateControls();
ignoreChanges = false;
return;
}
#ifdef __UNIX__
if (filename == wxT("~"))
{
ignoreChanges = true;
m_list->GoToHomeDir();
m_list->SetFocus();
UpdateControls();
ignoreChanges = false;
return;
}
if (filename.BeforeFirst(wxT('/')) == wxT("~"))
{
filename = wxString(wxGetUserHome()) + filename.Remove(0, 1);
}
#endif // __UNIX__
if (!HasFdFlag(wxFD_SAVE))
{
if ((filename.Find(wxT('*')) != wxNOT_FOUND) ||
(filename.Find(wxT('?')) != wxNOT_FOUND))
{
if (filename.Find(wxFILE_SEP_PATH) != wxNOT_FOUND)
{
wxMessageBox(_("Illegal file specification."), _("Error"), wxOK | wxICON_ERROR );
return;
}
m_list->SetWild( filename );
return;
}
}
if (!IsTopMostDir(dir))
dir += wxFILE_SEP_PATH;
if (!wxIsAbsolutePath(filename))
{
dir += filename;
filename = dir;
}
if (wxDirExists(filename))
{
ignoreChanges = true;
m_list->GoToDir( filename );
UpdateControls();
ignoreChanges = false;
return;
}
// they really wanted a dir, but it doesn't exist
if (want_dir)
{
wxMessageBox(_("Directory doesn't exist."), _("Error"),
wxOK | wxICON_ERROR );
return;
}
// append the default extension to the filename if it doesn't have any
//
// VZ: the logic of testing for !wxFileExists() only for the open file
// dialog is not entirely clear to me, why don't we allow saving to a
// file without extension as well?
if ( !HasFdFlag(wxFD_OPEN) || !wxFileExists(filename) )
{
filename = AppendExtension(filename, m_filterExtension);
}
// check that the file [doesn't] exist if necessary
if ( HasFdFlag(wxFD_SAVE) && HasFdFlag(wxFD_OVERWRITE_PROMPT) &&
wxFileExists( filename ) )
{
wxString msg;
msg.Printf( _("File '%s' already exists, do you really want to overwrite it?"), filename.c_str() );
if (wxMessageBox(msg, _("Confirm"), wxYES_NO) != wxYES)
return;
}
else if ( HasFdFlag(wxFD_OPEN) && HasFdFlag(wxFD_FILE_MUST_EXIST) &&
!wxFileExists(filename) )
{
wxMessageBox(_("Please choose an existing file."), _("Error"),
wxOK | wxICON_ERROR );
return;
}
SetPath( filename );
// change to the directory where the user went if asked
if ( HasFdFlag(wxFD_CHANGE_DIR) )
{
wxString cwd;
wxSplitPath(filename, &cwd, NULL, NULL);
if ( cwd != wxGetCwd() )
{
wxSetWorkingDirectory(cwd);
}
}
EndModal(wxID_OK);
}
wxString wxStandardPaths::GetUserDir(Dir userDir) const
{
{
wxLogNull logNull;
wxString homeDir = wxFileName::GetHomeDir();
wxString configPath;
if (wxGetenv(wxT("XDG_CONFIG_HOME")))
configPath = wxGetenv(wxT("XDG_CONFIG_HOME"));
else
configPath = homeDir + wxT("/.config");
wxString dirsFile = configPath + wxT("/user-dirs.dirs");
if (wxFileExists(dirsFile))
{
wxString userDirId;
switch (userDir)
{
case Dir_Desktop:
userDirId = "XDG_DESKTOP_DIR";
break;
case Dir_Downloads:
userDirId = "XDG_DOWNLOAD_DIR";
break;
case Dir_Music:
userDirId = "XDG_MUSIC_DIR";
break;
case Dir_Pictures:
userDirId = "XDG_PICTURES_DIR";
break;
case Dir_Videos:
userDirId = "XDG_VIDEOS_DIR";
break;
default:
userDirId = "XDG_DOCUMENTS_DIR";
break;
}
wxTextFile textFile;
if (textFile.Open(dirsFile))
{
size_t i;
#if defined(__INTEL_COMPILER) && 1 /* VDM auto patch */
# pragma ivdep
# pragma swp
# pragma unroll
# pragma prefetch
# if 0
# pragma simd noassert
# endif
#endif /* VDM auto patch */
for (i = 0; i < textFile.GetLineCount(); i++)
{
wxString line(textFile[i]);
int pos = line.Find(userDirId);
if (pos != wxNOT_FOUND)
{
wxString value = line.AfterFirst(wxT('='));
value.Replace(wxT("$HOME"), homeDir);
value.Trim(true);
value.Trim(false);
// Remove quotes
value.Replace("\"", "", true /* replace all */);
if (!value.IsEmpty() && wxDirExists(value))
return value;
else
break;
}
}
}
}
}
return wxStandardPathsBase::GetUserDir(userDir);
}
void KICAD_MANAGER_FRAME::CreateNewProject( const wxString& aPrjFullFileName,
bool aTemplateSelector = false )
{
wxFileName newProjectName = aPrjFullFileName;
wxChar sep[2] = { SEP(), 0 }; // nul terminated separator wxChar string.
ClearMsg();
// If we are creating a project from a template, make sure the template directory is sane
if( aTemplateSelector )
{
DIALOG_TEMPLATE_SELECTOR* ps = new DIALOG_TEMPLATE_SELECTOR( this );
wxFileName templatePath;
wxString envStr;
#ifndef __WXMAC__
wxGetEnv( wxT( "KICAD" ), &envStr );
// Add a new tab for system templates
if( !envStr.empty() )
{
// user may or may not have including terminating separator.
if( !envStr.EndsWith( sep ) )
envStr += sep;
templatePath = envStr + wxT( "template" ) + sep;
}
else
{
// The standard path should be in the share directory for kicad. As
// it is normal on Windows to only have the share directory and not
// the kicad sub-directory we fall back to that if the directory
// doesn't exist
templatePath = wxPathOnly( wxStandardPaths::Get().GetExecutablePath() ) +
sep + wxT( ".." ) + sep + wxT( "share" ) + sep + wxT( "kicad" ) +
sep + wxT( "template" ) + sep;
if( !wxDirExists( templatePath.GetFullPath() ) )
{
templatePath = wxPathOnly( wxStandardPaths::Get().GetExecutablePath() ) +
sep + wxT( ".." ) + sep + wxT( "share" ) + sep + wxT( "template" ) + sep;
}
}
#else
// Use what is provided in the bundle data dir
templatePath = GetOSXKicadDataDir() + sep + wxT( "template" );
#endif
ps->AddTemplatesPage( _( "System Templates" ), templatePath );
// Add a new tab for user templates
wxFileName userPath = wxStandardPaths::Get().GetDocumentsDir() +
sep + wxT( "kicad" ) + sep + wxT( "template" ) + sep;
ps->AddTemplatesPage( _( "User Templates" ), userPath );
// Check to see if a custom template location is available and setup a
// new selection tab if there is.
envStr.clear();
wxGetEnv( wxT( "KICAD_PTEMPLATES" ), &envStr );
if( !envStr.empty() )
{
if( !envStr.EndsWith( sep ) )
envStr += sep;
wxFileName envPath = envStr;
ps->AddTemplatesPage( _( "Portable Templates" ), envPath );
}
// Show the project template selector dialog
int result = ps->ShowModal();
if( ( result != wxID_OK ) || ( ps->GetSelectedTemplate() == NULL ) )
{
if( ps->GetSelectedTemplate() == NULL )
{
wxMessageBox( _( "No project template was selected. Cannot generate new "
"project." ),
_( "Error" ),
wxOK | wxICON_ERROR,
this );
}
}
else
{
// The selected template widget contains the template we're attempting to use to
// create a project
if( !ps->GetSelectedTemplate()->CreateProject( newProjectName ) )
{
wxMessageBox( _( "Problem whilst creating new project from template!" ),
_( "Template Error" ),
wxOK | wxICON_ERROR,
this );
}
}
}
// Init project filename
SetProjectFileName( newProjectName.GetFullPath() );
// Write settings to project file
// was: wxGetApp().WriteProjectConfig( aPrjFullFileName, GeneralGroupName, s_KicadManagerParams );
Prj().ConfigSave( PgmTop().SysSearch(), GeneralGroupName, s_KicadManagerParams );
// Ensure a "stub" for a schematic root sheet and a board exist.
// It will avoid messages from the schematic editor or the board editor to create a new file
// And forces the user to create main files under the right name for the project manager
wxFileName fn( newProjectName.GetFullPath() );
fn.SetExt( SchematicFileExtension );
// If a <project>.sch file does not exist, create a "stub" file
// ( minimal schematic file )
if( !fn.FileExists() )
{
wxFile file( fn.GetFullPath(), wxFile::write );
if( file.IsOpened() )
file.Write( wxT( "EESchema Schematic File Version 2\n"
"EELAYER 25 0\nEELAYER END\n$EndSCHEMATC\n" ) );
// wxFile dtor will close the file
}
// If a <project>.kicad_pcb or <project>.brd file does not exist,
// create a .kicad_pcb "stub" file
fn.SetExt( KiCadPcbFileExtension );
wxFileName leg_fn( fn );
leg_fn.SetExt( LegacyPcbFileExtension );
if( !fn.FileExists() && !leg_fn.FileExists() )
{
wxFile file( fn.GetFullPath(), wxFile::write );
if( file.IsOpened() )
file.Write( wxT( "(kicad_pcb (version 4) (host kicad \"dummy file\") )\n" ) );
// wxFile dtor will close the file
}
// Enable the toolbar and menubar buttons and clear the help text.
m_active_project = true;
m_MessagesBox->Clear();
}
bool CBOINCGUIApp::OnInit() {
// Initialize globals
#ifdef SANDBOX
g_use_sandbox = true;
#else
g_use_sandbox = false;
#endif
s_bSkipExitConfirmation = false;
m_bFilterEvents = false;
m_bAboutDialogIsOpen = false;
// Initialize class variables
m_pLocale = NULL;
m_pSkinManager = NULL;
m_pFrame = NULL;
m_pDocument = NULL;
m_pTaskBarIcon = NULL;
m_pEventLog = NULL;
#ifdef __WXMAC__
m_pMacDockIcon = NULL;
#endif
m_strBOINCMGRExecutableName = wxEmptyString;
m_strBOINCMGRRootDirectory = wxEmptyString;
m_strBOINCMGRDataDirectory = wxEmptyString;
m_strHostNameArg = wxEmptyString;
m_strPasswordArg = wxEmptyString;
m_iRPCPortArg = GUI_RPC_PORT;
m_strBOINCArguments = wxEmptyString;
m_bGUIVisible = true;
m_bDebugSkins = false;
m_bMultipleInstancesOK = false;
m_bBOINCMGRAutoStarted = false;
m_iBOINCMGRDisableAutoStart = 0;
m_iShutdownCoreClient = 0;
m_iDisplayExitDialog = 1;
m_iGUISelected = BOINC_SIMPLEGUI;
m_bSafeMessageBoxDisplayed = 0;
#ifdef __WXMSW__
m_hClientLibraryDll = NULL;
#endif
// Initialize local variables
int iErrorCode = 0;
int iSelectedLanguage = 0;
bool bOpenEventLog = false;
wxString strDesiredSkinName = wxEmptyString;
wxString strDialogMessage = wxEmptyString;
bool success = false;
// Configure wxWidgets platform specific code
#ifdef __WXMSW__
wxSystemOptions::SetOption(wxT("msw.staticbox.optimized-paint"), 0);
#endif
#ifdef __WXMAC__
// In wxMac-2.8.7, default wxListCtrl::RefreshItem() does not work
// so use traditional generic implementation.
// This has been fixed in wxMac-2.8.8, but the Mac native implementation:
// - takes 3 times the CPU time as the Mac generic version.
// - seems to always redraw entire control even if asked to refresh only one row.
// - causes major flicker of progress bars, (probably due to full redraws.)
wxSystemOptions::SetOption(wxT("mac.listctrl.always_use_generic"), 1);
AEInstallEventHandler( kCoreEventClass, kAEQuitApplication, NewAEEventHandlerUPP((AEEventHandlerProcPtr)QuitAppleEventHandler), 0, false );
// Cache the current process serial number
GetCurrentProcess(&m_psnCurrentProcess);
#endif
// Commandline parsing is done in wxApp::OnInit()
if (!wxApp::OnInit()) {
return false;
}
if (g_use_sandbox) {
wxCHANGE_UMASK(2); // Set file creation mask to be writable by both user and group
// Our umask will be inherited by all our child processes
}
// Setup application and company information
SetAppName(wxT("BOINC Manager"));
SetVendorName(wxT("Space Sciences Laboratory, U.C. Berkeley"));
// Initialize the configuration storage module
m_pConfig = new wxConfig(GetAppName());
wxConfigBase::Set(m_pConfig);
wxASSERT(m_pConfig);
// Restore Application State
m_pConfig->SetPath(wxT("/"));
m_pConfig->Read(wxT("AutomaticallyShutdownClient"), &m_iShutdownCoreClient, 0L);
m_pConfig->Read(wxT("DisplayShutdownClientDialog"), &m_iDisplayExitDialog, 1L);
m_pConfig->Read(wxT("DisableAutoStart"), &m_iBOINCMGRDisableAutoStart, 0L);
m_pConfig->Read(wxT("Language"), &iSelectedLanguage, 0L);
m_pConfig->Read(wxT("GUISelection"), &m_iGUISelected, BOINC_SIMPLEGUI);
m_pConfig->Read(wxT("EventLogOpen"), &bOpenEventLog);
// Should we abort the BOINC Manager startup process?
if (m_bBOINCMGRAutoStarted && m_iBOINCMGRDisableAutoStart) {
return false;
}
// Detect where BOINC Manager executable name.
DetectExecutableName();
// Detect where BOINC Manager was installed too.
DetectRootDirectory();
// Detect where the BOINC Data files are.
DetectDataDirectory();
// Switch the current directory to the BOINC Data directory
if (!GetDataDirectory().IsEmpty()) {
success = wxSetWorkingDirectory(GetDataDirectory());
if (!success) {
if (!g_use_sandbox) {
if (!wxDirExists(GetDataDirectory())) {
success = wxMkdir(GetDataDirectory(), 0777); // Does nothing if dir exists
}
}
}
}
if (!success) iErrorCode = -1016;
// Initialize the BOINC Diagnostics Framework
int dwDiagnosticsFlags =
BOINC_DIAG_DUMPCALLSTACKENABLED |
BOINC_DIAG_HEAPCHECKENABLED |
BOINC_DIAG_MEMORYLEAKCHECKENABLED |
#if defined(__WXMSW__) || defined(__WXMAC__)
BOINC_DIAG_REDIRECTSTDERR |
BOINC_DIAG_REDIRECTSTDOUT |
#endif
BOINC_DIAG_TRACETOSTDOUT;
diagnostics_init(
dwDiagnosticsFlags,
"stdoutgui",
"stderrgui"
);
// Enable Logging and Trace Masks
m_pLog = new wxLogBOINC();
wxLog::SetActiveTarget(m_pLog);
m_pLog->AddTraceMask(wxT("Function Start/End"));
m_pLog->AddTraceMask(wxT("Function Status"));
// Initialize the internationalization module
#ifdef __WXMSW__
// On Windows, set all locales for this thread on a per-thread basis
_configthreadlocale(_ENABLE_PER_THREAD_LOCALE);
#endif
m_pLocale = new wxLocale();
wxASSERT(m_pLocale);
// Look for the localization files by absolute and relative locations.
// preference given to the absolute location.
m_pLocale->Init(iSelectedLanguage);
if (!m_strBOINCMGRRootDirectory.IsEmpty()) {
m_pLocale->AddCatalogLookupPathPrefix(
wxString(m_strBOINCMGRRootDirectory + wxT("locale"))
);
}
m_pLocale->AddCatalogLookupPathPrefix(wxT("locale"));
m_pLocale->AddCatalog(wxT("BOINC-Manager"));
m_pLocale->AddCatalog(wxT("BOINC-Client"));
m_pLocale->AddCatalog(wxT("BOINC-Web"));
InitSupportedLanguages();
language = m_pLocale->GetCanonicalName();
// Note: JAWS for Windows will only speak the context-sensitive
// help if you use this help provider:
wxHelpProvider::Set(new wxHelpControllerHelpProvider());
// Enable known image types
wxInitAllImageHandlers();
// Initialize the skin manager
m_pSkinManager = new CSkinManager(m_bDebugSkins);
wxASSERT(m_pSkinManager);
// Load desired manager skin
m_pConfig->Read(wxT("Skin"), &strDesiredSkinName, m_pSkinManager->GetDefaultSkinName());
m_pSkinManager->ReloadSkin(strDesiredSkinName);
#ifdef SANDBOX
// Make sure owners, groups and permissions are correct for the current setting of g_use_sandbox
char path_to_error[MAXPATHLEN];
path_to_error[0] = '\0';
if (!iErrorCode) {
#if (defined(__WXMAC__) && defined(_DEBUG)) // TODO: implement this for other platforms
// GDB can't attach to applications which are running as a different user
// or group, so fix up data with current user and group during debugging
if (check_security(g_use_sandbox, true, NULL, 0)) {
CreateBOINCUsersAndGroups();
SetBOINCDataOwnersGroupsAndPermissions();
SetBOINCAppOwnersGroupsAndPermissions(NULL);
}
#endif
iErrorCode = check_security(
g_use_sandbox, true, path_to_error, sizeof(path_to_error)
);
}
if (iErrorCode) {
ShowApplication(true);
if (iErrorCode == -1099) {
strDialogMessage.Printf(
_("You currently are not authorized to manage the client.\n\nTo run %s as this user, please:\n - reinstall %s answering \"Yes\" to the question about\n non-administrative users\n or\n - contact your administrator to add you to the 'boinc_master'\n user group."),
m_pSkinManager->GetAdvanced()->GetApplicationShortName().c_str(),
m_pSkinManager->GetAdvanced()->GetApplicationShortName().c_str()
);
} else {
strDialogMessage.Printf(
_("%s ownership or permissions are not set properly; please reinstall %s.\n(Error code %d"),
m_pSkinManager->GetAdvanced()->GetApplicationShortName().c_str(),
m_pSkinManager->GetAdvanced()->GetApplicationShortName().c_str(),
iErrorCode
);
if (path_to_error[0]) {
strDialogMessage += _(" at ");
strDialogMessage += wxString::FromUTF8(path_to_error);
}
strDialogMessage += _(")");
fprintf(stderr, "%s\n", (const char*)strDialogMessage.utf8_str());
}
wxMessageDialog* pDlg = new wxMessageDialog(
NULL,
strDialogMessage,
m_pSkinManager->GetAdvanced()->GetApplicationName(),
wxOK
);
pDlg->ShowModal();
if (pDlg)
pDlg->Destroy();
return false;
}
#endif // SANDBOX
#ifdef __WXMSW__
// Perform any last minute checks that should keep the manager
// from starting up.
wxString strRebootPendingFile =
GetRootDirectory() + wxFileName::GetPathSeparator() + wxT("RebootPending.txt");
if (wxFile::Exists(strRebootPendingFile)) {
wxMessageDialog dialog(
NULL,
_("A reboot is required in order for BOINC to run properly.\nPlease reboot your computer and try again."),
_("BOINC Manager"),
wxOK|wxICON_ERROR
);
dialog.ShowModal();
return false;
}
#endif
// Detect if BOINC Manager is already running, if so, bring it into the
// foreground and then exit.
if (!m_bMultipleInstancesOK) {
if (DetectDuplicateInstance()) {
return false;
}
}
// Initialize the main document
m_pDocument = new CMainDocument();
wxASSERT(m_pDocument);
m_pDocument->OnInit();
// Is there a condition in which the Simple GUI should not be used?
if (BOINC_SIMPLEGUI == m_iGUISelected) {
// Screen too small?
if (wxGetDisplaySize().GetHeight() < 600) {
m_iGUISelected = BOINC_ADVANCEDGUI;
}
}
// Initialize the task bar icon
m_pTaskBarIcon = new CTaskBarIcon(
m_pSkinManager->GetAdvanced()->GetApplicationName(),
#ifdef __WXMSW__
new wxIcon(wxICON(BOINCGUIAPP)),
#else
m_pSkinManager->GetAdvanced()->GetApplicationIcon(),
#endif
m_pSkinManager->GetAdvanced()->GetApplicationDisconnectedIcon(),
m_pSkinManager->GetAdvanced()->GetApplicationSnoozeIcon()
#ifdef __WXMAC__
, wxTBI_CUSTOM_STATUSITEM
#endif
);
#ifdef __WXMAC__
m_pMacDockIcon = new CTaskBarIcon(
m_pSkinManager->GetAdvanced()->GetApplicationName(),
m_pSkinManager->GetAdvanced()->GetApplicationIcon(),
m_pSkinManager->GetAdvanced()->GetApplicationDisconnectedIcon(),
m_pSkinManager->GetAdvanced()->GetApplicationSnoozeIcon()
, wxTBI_DOCK
);
wxASSERT(m_pMacDockIcon);
#endif
wxASSERT(m_pTaskBarIcon);
// Startup the System Idle Detection code
IdleTrackerAttach();
#ifdef __WXMAC__
ProcessSerialNumber psn;
ProcessInfoRec pInfo;
OSStatus err;
memset(&pInfo, 0, sizeof(pInfo));
pInfo.processInfoLength = sizeof( ProcessInfoRec );
err = GetProcessInformation(&m_psnCurrentProcess, &pInfo);
if (!err) {
psn = pInfo.processLauncher;
memset(&pInfo, 0, sizeof(pInfo));
pInfo.processInfoLength = sizeof( ProcessInfoRec );
err = GetProcessInformation(&psn, &pInfo);
}
// Don't open main window if we were started automatically at login
if (pInfo.processSignature == 'lgnw') { // Login Window app
m_bGUIVisible = false;
// If the system was just started, we usually get a "Connection
// failed" error if we try to connect too soon, so delay a bit.
sleep(10);
}
#endif
// Show the UI
SetActiveGUI(m_iGUISelected, m_bGUIVisible);
if (!m_bGUIVisible) {
#ifdef __WXMAC__
// We don't call Hide() or Show(false) for the main frame
// under wxCocoa 2.9.5 because it bounces the Dock icon
// (as in notification.) We work around this by moving
// the main window/frame off screen here.
// The position will be restored in one of these methods:
// CBOINCGUIApp::OnActivateApp(), CSimpleFrame::SaveState()
// or CAdvancedFrame::SaveWindowDimensions().
if (m_pFrame) {
m_pFrame->MoveFrameOffScreen();
m_pFrame->Show();
}
#endif
ShowApplication(false);
}
if (bOpenEventLog) {
DisplayEventLog(m_bGUIVisible);
if (m_bGUIVisible && m_pFrame) {
m_pFrame->Raise();
}
}
return true;
}
Calendario::Calendario(const wxString& title, const wxPoint& pos, const wxSize& size)
: wxFrame((wxFrame *)NULL, -1, title, pos, size)
{
//SetIcon(wxICON(ICONOCAL));
wxMenu *archivo = new wxMenu;
wxMenu* ventana=new wxMenu;
wxMenu* ayuda=new wxMenu;
this->SetTitle(_("Divel Calendar"));
this->SetSize(800,600);
ayuda->Append(ID_OPT, _("Configuracion"),_("Ajuste las configuraciones"));
ayuda->Append( ID_About, _("&Acerca") );
archivo->Append(ID_ADDEVT, _("&Anadir evento"));
archivo->Append(ID_ADDREC, _("A&nadir recordatorio"));
//archivo->AppendSeparator();
//archivo->Append(ID_OPEN, "A&brir calendario");
//archivo->Append(ID_SAVE, "&Guardar calendario");
archivo->AppendSeparator();
archivo->Append( ID_Quit, _("&Salir") );
ventana->Append(ID_CHAT,_("&DivChat"),_("Abre la ventana de chat"));
//ventana->Append(ID_EVENTS, "D&ivelEvents","Abre la ventana de eventos Divel");
//ventana->Append(ID_NOTES, "Divel &Notes","Abre la ventana de apuntes");
wxMenuBar *menuBar = new wxMenuBar;
menuBar->Append( archivo, _("&Archivo") );
menuBar->Append(ventana,_("&Ventana"));
menuBar->Append(ayuda,_("A&yuda"));
SetMenuBar( menuBar );
//Crear Frame principal
wxInitAllImageHandlers();
wxString appdata=wxString::FromUTF8(getenv("HOME"));
if(wxDirExists(appdata+_("/Divel/Calendar"))==false)
{
wxMkdir(appdata+_("/Divel"));
wxMkdir(appdata+_("/Divel/Calendar"));
//wxCopyFile("./conf.cfg",appdata+"\\Divel\\Calendar\\conf.cfg");
}else if(wxFileExists(appdata+_("/Divel/Calendar/conf.cfg"))==true){
int fuente=0, color=0,posicion=0,premium=0;
wxString situacionconf=appdata+_("/Divel/Calendar/conf.cfg");
ifstream configfile(situacionconf.mb_str(),ifstream::in);
if(configfile.good())
{
char buffer;
buffer=configfile.get();
wxString conffile=wxChar(buffer);
while(!configfile.eof())
{
buffer=configfile.get();
if(buffer=='1'){
printf("Uno detectado");
switch(posicion){
case 0: {fondo=1;posicion++;}break;
case 1: {fuente=1;posicion++;}break;
case 2: {color=1;posicion++;}break;
case 3: {premium=1;posicion++;}break;
}}
if(buffer=='0'){
printf("Cero detectado");
posicion++;
}
conffile+=buffer;
}
configfile.close();
}
if(fondo==1){
}
if(premium==1){
wxMessageBox(_("Bienvenido usuario premium"));
}
}
panel=new wxPanel(this);
panel->SetBackgroundColour(wxColour(_("white")));
calendar=new wxPanel(panel,1,1,600,400);
//calendar->SetBackgroundColour(wxColour("red"));
calendar->Connect(wxEVT_PAINT,wxPaintEventHandler(Calendario::Paint));
/*this->SetFont(wxFont(14,1,1,3,true));
this->SetFont(wxFont(12,2,1,3,true));
panel->SetFont(wxFont(12,3,1,3,true));*/
//wxFontPickerCtrl* fuentedlg=new wxFontPickerCtrl(panel,wxID_ANY,wxNullFont,wxPoint(-1,-1));
//Sistema de fuentes
/*
wxFontDialog* fuente=new wxFontDialog();
fuente->ShowModal();
wxFontData mifuente=fuente->GetFontData();
wxFont lafuente=mifuente.GetChosenFont();
panel->SetFont(lafuente);
this->SetFont(lafuente);
*/
if(fondo==1){
wxBitmap fondo(appdata+_("/Divel/Calendar/fondo.png"),wxBITMAP_TYPE_PNG);
wxStaticBitmap* fonpantalla=new wxStaticBitmap(panel,wxID_ANY,fondo,wxDefaultPosition,wxDefaultSize);
}
wxButton* anadirevt=new wxButton(panel,ID_ADDEVT,_("Anadir evento"),wxPoint(610,20),wxSize(150,50));
wxButton* anadirrec=new wxButton(panel,ID_ADDREC,_("Anadir recordatorio"),wxPoint(610,80),wxSize(150,50));
wxButton* del=new wxButton(panel,ID_DELETE,_("Borrar evento"),wxPoint(610,140),wxSize(150,50));
wxButton* ver=new wxButton(panel,ID_VER,_("Ver evento"),wxPoint(610,200),wxSize(150,50));
wxButton* divchat=new wxButton(panel,ID_CHAT,_("DivChat"),wxPoint(610,260),wxSize(150,50));
desc=new wxStaticText(panel,wxID_ANY,_("Ningun evento seleccionado"),wxPoint(1,410));
//wxPanel* calendar=new wxPanel(panel,-1,-1,600,400);
/*wxMemoryDC* memoria=new wxMemoryDC;
wxClientDC calendario(panel);
//memoria->DrawCircle(wxPoint(1,1),wxCoord(32));
//calendario.Blit(wxPoint(-1,-1),wxSize(600,400),memoria,wxPoint(-1,-1));
calendario.DrawCircle(wxPoint(1,1),wxCoord(32));*/
wxCalendarCtrl* calendarctrl=new wxCalendarCtrl(calendar,ID_CAL,wxDefaultDateTime,wxPoint(1,1),wxSize(600,400),wxCAL_MONDAY_FIRST);
Connect(ID_ADDEVT, wxEVT_COMMAND_BUTTON_CLICKED,wxCommandEventHandler(Calendario::CrearEvento));
Connect(ID_ADDREC, wxEVT_COMMAND_BUTTON_CLICKED,wxCommandEventHandler(Calendario::CrearRecordatorio));
Connect(ID_VER, wxEVT_COMMAND_BUTTON_CLICKED,wxCommandEventHandler(Calendario::VerEvento));
Connect(ID_DELETE, wxEVT_COMMAND_BUTTON_CLICKED,wxCommandEventHandler(Calendario::BorrarEvento));
Connect(ID_CHAT,wxEVT_COMMAND_BUTTON_CLICKED,wxCommandEventHandler(Calendario::DivelChat));
CreateStatusBar();
SetStatusText(_("Bienvenido a Divel Calendar"));
}
void ThemeBase::SaveComponents()
{
// IF directory doesn't exist THEN create it
if( !wxDirExists( FileNames::ThemeComponentsDir() ))
{
/// \bug 1 in wxWidgets documentation; wxMkDir returns false if
/// directory didn't exist, even if it successfully creates it.
/// so we create and then test if it exists instead.
/// \bug 2 in wxWidgets documentation; wxMkDir has only one argument
/// under MSW
#ifdef __WXMSW__
wxMkDir( FileNames::ThemeComponentsDir().fn_str() );
#else
wxMkDir( FileNames::ThemeComponentsDir().fn_str(), 0700 );
#endif
if( !wxDirExists( FileNames::ThemeComponentsDir() ))
{
wxMessageBox(
wxString::Format(
_("Could not create directory:\n %s"),
FileNames::ThemeComponentsDir().c_str() ));
return;
}
}
wxBusyCursor busy;
int i;
int n=0;
wxString FileName;
for(i=0;i<(int)mImages.GetCount();i++)
{
if( (mBitmapFlags[i] & resFlagInternal)==0)
{
FileName = FileNames::ThemeComponent( mBitmapNames[i] );
if( !wxFileExists( FileName ))
{
if( !mImages[i].SaveFile( FileName, wxBITMAP_TYPE_PNG ))
{
wxMessageBox(
wxString::Format(
_("Audacity could not save file:\n %s"),
FileName.c_str() ));
return;
}
n++;
}
}
}
if( n==0 )
{
wxMessageBox(
wxString::Format(
_("All required files in:\n %s\nwere already present."),
FileNames::ThemeComponentsDir().c_str() ));
return;
}
wxMessageBox(
wxString::Format(
wxT("Theme written to:\n %s."),
FileNames::ThemeComponentsDir().c_str() ));
}
void OnOptions2(int event_id)
{//==========================
wxString string;
int value;
switch(event_id)
{
case MENU_OPT_SPEED:
value = wxGetNumberFromUser(_T(""),_T(""),_T("Speed"),option_speed,80,500);
if(value > 0)
{
option_speed = value;
SetParameter(espeakRATE,option_speed,0);
SetSpeed(3);
}
break;
case MENU_OPT_PUNCT:
transldlg->t_source->SetValue(_T("<tts:style field=\"punctuation\" mode=\"all\">\n"));
transldlg->t_source->SetInsertionPointEnd();
notebook->SetSelection(1);
break;
case MENU_OPT_SPELL:
transldlg->t_source->SetValue(_T("<say-as interpret-as=\"characters\">\n"));
transldlg->t_source->SetInsertionPointEnd();
notebook->SetSelection(1);
break;
case MENU_OPT_SPELL2:
transldlg->t_source->SetValue(_T("<say-as interpret-as=\"tts:char\">\n"));
transldlg->t_source->SetInsertionPointEnd();
notebook->SetSelection(1);
break;
case MENU_PATH_DATA:
string = wxDirSelector(_T("espeak_data directory"), wxEmptyString);
if(!string.IsEmpty())
{
if(!wxDirExists(string+_T("/voices")))
{
wxLogError(_T("No 'voices' directory in ") + string);
break;
}
path_espeakdata = string;
wxLogMessage(_T("Quit and restart espeakedit to use the new espeak_data location"));
}
break;
case MENU_PATH0:
string = wxFileSelector(_T("Master phonemes file"),wxFileName(path_phfile).GetPath(),
_T("phonemes"),_T(""),_T("*"),wxOPEN);
if(!string.IsEmpty())
{
path_phfile = string;
}
break;
case MENU_PATH1:
string = wxDirSelector(_T("Phoneme source directory"),path_phsource);
if(!string.IsEmpty())
{
path_phsource = string;
}
break;
case MENU_PATH2:
string = wxDirSelector(_T("Dictionary source directory"),path_dictsource);
if(!string.IsEmpty())
{
path_dictsource = string;
}
break;
case MENU_PATH3:
string = wxFileSelector(_T("Sound output file"),wxFileName(path_speech).GetPath(),
_T(""),_T("WAV"),_T("*"),wxSAVE);
if(!string.IsEmpty())
{
path_speech = string;
}
break;
case MENU_PATH4:
string = wxFileSelector(_T("Voice file to modify formant peaks"),wxFileName(path_speech).GetPath(),
_T(""),_T(""),_T("*"),wxOPEN);
if(!string.IsEmpty())
{
path_modifiervoice = string;
}
break;
}
ConfigSetPaths();
}
void wxGenericFileCtrl::HandleAction( const wxString &fn )
{
if ( m_ignoreChanges )
return;
wxString filename( fn );
if ( filename.empty() )
{
return;
}
if ( filename == wxT( "." ) ) return;
wxString dir = m_list->GetDir();
// "some/place/" means they want to chdir not try to load "place"
const bool want_dir = filename.Last() == wxFILE_SEP_PATH;
if ( want_dir )
filename = filename.RemoveLast();
if ( filename == wxT( ".." ) )
{
m_ignoreChanges = true;
m_list->GoToParentDir();
GenerateFolderChangedEvent( this, this );
UpdateControls();
m_ignoreChanges = false;
return;
}
#ifdef __UNIX__
if ( filename == wxT( "~" ) )
{
m_ignoreChanges = true;
m_list->GoToHomeDir();
GenerateFolderChangedEvent( this, this );
UpdateControls();
m_ignoreChanges = false;
return;
}
if ( filename.BeforeFirst( wxT( '/' ) ) == wxT( "~" ) )
{
filename = wxString( wxGetUserHome() ) + filename.Remove( 0, 1 );
}
#endif // __UNIX__
if ( !( m_style & wxFC_SAVE ) )
{
if ( ( filename.Find( wxT( '*' ) ) != wxNOT_FOUND ) ||
( filename.Find( wxT( '?' ) ) != wxNOT_FOUND ) )
{
if ( filename.Find( wxFILE_SEP_PATH ) != wxNOT_FOUND )
{
wxMessageBox( _( "Illegal file specification." ),
_( "Error" ), wxOK | wxICON_ERROR, this );
return;
}
m_list->SetWild( filename );
return;
}
}
if ( !IsTopMostDir( dir ) )
dir += wxFILE_SEP_PATH;
if ( !wxIsAbsolutePath( filename ) )
{
dir += filename;
filename = dir;
}
if ( wxDirExists( filename ) )
{
m_ignoreChanges = true;
m_list->GoToDir( filename );
UpdateControls();
GenerateFolderChangedEvent( this, this );
m_ignoreChanges = false;
return;
}
// they really wanted a dir, but it doesn't exist
if ( want_dir )
{
wxMessageBox( _( "Directory doesn't exist." ), _( "Error" ),
wxOK | wxICON_ERROR, this );
return;
}
// append the default extension to the filename if it doesn't have any
//
// VZ: the logic of testing for !wxFileExists() only for the open file
// dialog is not entirely clear to me, why don't we allow saving to a
// file without extension as well?
if ( !( m_style & wxFC_OPEN ) || !wxFileExists( filename ) )
{
filename = wxFileDialogBase::AppendExtension( filename, m_filterExtension );
GenerateFileActivatedEvent( this, this, wxFileName( filename ).GetFullName() );
return;
}
GenerateFileActivatedEvent( this, this );
}
bool AbstractFileManager::isDirectory(const String& path) {
return wxDirExists(path);
}
bool NativeFileSystem::DirExists(const std::string & path)
{
return wxDirExists(path);
}
//////////////////////////////////////////////////////////////////////////
// Get system wide configuration file names
//////////////////////////////////////////////////////////////////////////
wxString sysSettings::GetConfigFile(configFileName cfgname)
{
wxASSERT_MSG(cfgname == sysSettings::PGPASS,
wxT("Handles only pgpass configuration"));
if (cfgname == PGPASS)
{
#if wxCHECK_VERSION(2, 9, 5)
wxStandardPaths &stdp = wxStandardPaths::Get();
#else
wxStandardPaths stdp;
#endif
wxString fname;
bool bpsfile = wxGetEnv(wxT("PGPASSFILE"), &fname);
if (!bpsfile)
{
fname = stdp.GetUserConfigDir();
#ifdef WIN32
fname += wxT("\\postgresql");
if (!wxDirExists(fname))
wxMkdir(fname);
fname += wxT("\\pgpass.conf");
}
#else
fname += wxT("/.pgpass");
}
#endif
else
{
if(!wxFileName::FileExists(fname))
{
wxFileName dirTemp = wxFileName::DirName(fname);
/*
* wxFileName::DirName() does not return the directory path of
* the file. It assumes that the given path is of a directory,
* when the specified file/directory does not exist.
*
* Hence - removeing it to get the actual parent directory.
*/
dirTemp.RemoveLastDir();
if (!dirTemp.DirExists())
{
wxFileName dir = dirTemp;
// Decide which are folders we need to create
wxString sRemoveOnError = dirTemp.GetPath();
while(!dirTemp.DirExists())
{
sRemoveOnError = dirTemp.GetPath();
dirTemp.RemoveLastDir();
}
if (!dir.Mkdir(0755, wxPATH_MKDIR_FULL))
{
// In case of failure decide - we may need to delete
// the created directory structure from exists parent
// directory.
if (wxDir::Exists(sRemoveOnError))
wxFileName::Rmdir(sRemoveOnError);
}
}
}
}
wxFile f;
if (!f.Exists(fname))
f.Create(fname, false, wxS_IRUSR | wxS_IWUSR);
return fname;
}
bool wxvbamApp::OnInit()
{
// use consistent names for config
SetAppName(_("vbam"));
#if (wxMAJOR_VERSION >= 3)
SetAppDisplayName(_T("VisualBoyAdvance-M"));
#endif
// load system default locale, if available
locale.Init();
locale.AddCatalog(_T("wxvbam"));
// make built-in xrc file available
// this has to be done before parent OnInit() so xrc dump works
wxFileSystem::AddHandler(new wxMemoryFSHandler);
wxFileSystem::AddHandler(new wxArchiveFSHandler);
wxMemoryFSHandler::AddFileWithMimeType(wxT("wxvbam.xrs"), builtin_xrs, sizeof(builtin_xrs), wxT("application/zip"));
if (!wxApp::OnInit())
return false;
// prepare for loading xrc files
wxXmlResource* xr = wxXmlResource::Get();
// note: if linking statically, next 2 pull in lot of unused code
// maybe in future if not wxSHARED, load only builtin-needed handlers
xr->InitAllHandlers();
wxInitAllImageHandlers();
get_config_path(config_path);
// first, load override xrcs
// this can only override entire root nodes
// 2.9 has LoadAllFiles(), but this is 2.8, so we'll do it manually
wxString cwd = wxGetCwd();
for (int i = 0; i < config_path.size(); i++)
if (wxDirExists(config_path[i]) && wxSetWorkingDirectory(config_path[i]))
{
// *.xr[cs] doesn't work (double the number of scans)
// 2.9 gives errors for no files found, so manual precheck needed
// (yet another double the number of scans)
if (!wxFindFirstFile(wxT("*.xrc")).empty())
xr->Load(wxT("*.xrc"));
if (!wxFindFirstFile(wxT("*.xrs")).empty())
xr->Load(wxT("*.xrs"));
}
wxFileName xrcDir(GetConfigurationPath() + wxT("//xrc"), wxEmptyString);
if (xrcDir.DirExists() && wxSetWorkingDirectory(xrcDir.GetFullPath()) && !wxFindFirstFile(wxT("*.xrc")).empty())
{
xr->Load(wxT("*.xrc"));
}
else
{
// finally, load built-in xrc
xr->Load(wxT("memory:wxvbam.xrs"));
}
wxSetWorkingDirectory(cwd);
// set up config file
// this needs to be in a subdir to support other config as well
// but subdir flag behaves differently 2.8 vs. 2.9. Oh well.
// NOTE: this does not support XDG (freedesktop.org) paths
#if defined(__WXMSW__) || defined(__APPLE__)
wxFileName vbamconf(GetConfigurationPath(), _T("vbam.ini"));
cfg = new wxFileConfig(wxT("vbam"), wxEmptyString,
vbamconf.GetFullPath(),
wxEmptyString, wxCONFIG_USE_LOCAL_FILE);
#else
cfg = new wxFileConfig(wxEmptyString, wxEmptyString, wxEmptyString,
wxEmptyString,
// style =
wxCONFIG_USE_GLOBAL_FILE | wxCONFIG_USE_LOCAL_FILE |
wxCONFIG_USE_SUBDIR);
#endif
// set global config for e.g. Windows font mapping
wxFileConfig::Set(cfg);
// yet another bug/deficiency in wxConfig: dirs are not created if needed
// since a default config is always written, dirs are always needed
// Can't figure out statically if using wxFileConfig w/o duplicating wx's
// logic, so do it at run-time
// wxFileConfig *f = wxDynamicCast(cfg, wxFileConfig);
// wxConfigBase does not derive from wxObject!!! so no wxDynamicCast
wxFileConfig* fc = dynamic_cast<wxFileConfig*>(cfg);
if (fc)
{
wxFileName s(wxFileConfig::GetLocalFileName(GetAppName()));
// at least up to 2.8.12, GetLocalFileName returns the dir if
// SUBDIR is specified instead of actual file name
// and SUBDIR only affects UNIX
#if defined(__UNIX__) && !wxCHECK_VERSION(2,9,0)
s.AppendDir(s.GetFullName());
#endif
// only the path part gets created
// note that 0777 is default (assumes umask will do og-w)
s.Mkdir(0777, wxPATH_MKDIR_FULL);
s = wxFileName::DirName(GetConfigurationPath());
s.Mkdir(0777, wxPATH_MKDIR_FULL);
}
load_opts();
// process command-line options
for (int i = 0; i < pending_optset.size(); i++)
{
wxString p = pending_optset[i];
size_t eqat = p.find(wxT('='));
p[eqat] = 0;
opt_set(p.c_str(), p.c_str() + eqat + 1);
}
pending_optset.clear();
wxFileName vba_over(GetConfigurationPath(), wxT("vba-over.ini"));
wxFileName rdb(GetConfigurationPath(), wxT("Nintendo - Game Boy Advance*.dat"));
wxFileName scene_rdb(GetConfigurationPath(), wxT("Nintendo - Game Boy Advance (Scene)*.dat"));
wxFileName nointro_rdb(GetConfigurationPath(), wxT("Official No-Intro Nintendo Gameboy Advance Number (Date).xml"));
wxString f = wxFindFirstFile(nointro_rdb.GetFullPath(), wxFILE);
if (!f.empty() && wxFileName(f).IsFileReadable())
rom_database_nointro = f;
f = wxFindFirstFile(scene_rdb.GetFullPath(), wxFILE);
if (!f.empty() && wxFileName(f).IsFileReadable())
rom_database_scene = f;
f = wxFindFirstFile(rdb.GetFullPath(), wxFILE);
while (!f.empty())
{
if (f == rom_database_scene.GetFullPath())
{
f = wxFindNextFile();
}
else if (wxFileName(f).IsFileReadable())
{
rom_database = f;
break;
}
}
// load vba-over.ini
// rather than dealing with wxConfig's broken search path, just use
// the same one that the xrc overrides use
// this also allows us to override a group at a time, add commments, and
// add the file from which the group came
wxMemoryInputStream mis(builtin_over, sizeof(builtin_over));
overrides = new wxFileConfig(mis);
wxRegEx cmtre;
// not the most efficient thing to do: read entire file into a string
// just to parse the comments out
wxString bovs((const char*)builtin_over, wxConvUTF8, sizeof(builtin_over));
bool cont;
wxString s;
long grp_idx;
#define CMT_RE_START wxT("(^|[\n\r])# ?([^\n\r]*)(\r?\n|\r)\\[")
for (cont = overrides->GetFirstGroup(s, grp_idx); cont;
cont = overrides->GetNextGroup(s, grp_idx))
{
// apparently even MacOSX sometimes uses the old \r by itself
wxString cmt(CMT_RE_START);
cmt += s + wxT("\\]");
if (cmtre.Compile(cmt) && cmtre.Matches(bovs))
cmt = cmtre.GetMatch(bovs, 2);
else
cmt = wxEmptyString;
overrides->Write(s + wxT("/comment"), cmt);
}
if (vba_over.FileExists())
{
wxStringOutputStream sos;
wxFileInputStream fis(vba_over.GetFullPath());
// not the most efficient thing to do: read entire file into a string
// just to parse the comments out
fis.Read(sos);
// rather than assuming the file is seekable, use the string we just
// read as an input stream
wxStringInputStream sis(sos.GetString());
wxFileConfig ov(sis);
for (cont = ov.GetFirstGroup(s, grp_idx); cont;
cont = ov.GetNextGroup(s, grp_idx))
{
overrides->DeleteGroup(s);
overrides->SetPath(s);
ov.SetPath(s);
overrides->Write(wxT("path"), GetConfigurationPath());
// apparently even MacOSX sometimes uses \r by itself
wxString cmt(CMT_RE_START);
cmt += s + wxT("\\]");
if (cmtre.Compile(cmt) && cmtre.Matches(sos.GetString()))
cmt = cmtre.GetMatch(sos.GetString(), 2);
else
cmt = wxEmptyString;
overrides->Write(wxT("comment"), cmt);
long ent_idx;
for (cont = ov.GetFirstEntry(s, ent_idx); cont;
cont = ov.GetNextEntry(s, ent_idx))
overrides->Write(s, ov.Read(s, wxEmptyString));
ov.SetPath(wxT("/"));
overrides->SetPath(wxT("/"));
}
}
// create the main window
frame = wxDynamicCast(xr->LoadFrame(NULL, wxT("MainFrame")), MainFrame);
if (!frame)
{
wxLogError(_("Could not create main window"));
return false;
}
// Create() cannot be overridden easily
if (!frame->BindControls())
return false;
frame->Show(true);
return true;
}
void EditorColourSet::LoadAvailableSets()
{
// no need for syntax highlighting if batch building
if (Manager::IsBatchBuild())
return;
wxDir dir;
wxString filename;
FileManager *fm = FileManager::Get();
std::list<LoaderBase*> loaders;
int count = 0;
// user paths first
wxString path = ConfigManager::GetFolder(sdDataUser) + _T("/lexers/");
if (wxDirExists(path) && dir.Open(path))
{
Manager::Get()->GetLogManager()->Log(F(_("Scanning for lexers in %s..."), path.wx_str()));
bool ok = dir.GetFirst(&filename, _T("lexer_*.xml"), wxDIR_FILES);
while (ok)
{
loaders.push_back(fm->Load(path + filename));
ok = dir.GetNext(&filename);
++count;
}
Manager::Get()->GetLogManager()->Log(F(_("Found %d lexers"), count));
count = 0;
}
// global paths next
path = ConfigManager::GetFolder(sdDataGlobal) + _T("/lexers/");
if (wxDirExists(path) && dir.Open(path))
{
Manager::Get()->GetLogManager()->Log(F(_("Scanning for lexers in %s..."), path.wx_str()));
bool ok = dir.GetFirst(&filename, _T("lexer_*.xml"), wxDIR_FILES);
while (ok)
{
loaders.push_back(fm->Load(path + filename));
ok = dir.GetNext(&filename);
++count;
}
Manager::Get()->GetLogManager()->Log(F(_("Found %d lexers"), count));
}
EditorLexerLoader lex(this);
for (std::list<LoaderBase*>::iterator it = loaders.begin(); it != loaders.end(); ++it)
lex.Load(*it);
::Delete(loaders);
for (OptionSetsMap::iterator it = m_Sets.begin(); it != m_Sets.end(); ++it)
{
wxString lang = it->second.m_Langs;
if (lang.IsEmpty())
continue;
// keep the original filemasks and keywords, so we know what needs saving later
for (int i = 0; i <= wxSCI_KEYWORDSET_MAX; ++i)
{
it->second.m_originalKeywords[i] = it->second.m_Keywords[i];
}
it->second.m_originalFileMasks = it->second.m_FileMasks;
// remove old settings, no longer used
unsigned int i = 0;
while (i < it->second.m_Colours.GetCount())
{
OptionColour* opt = it->second.m_Colours.Item(i);
// valid values are:
if (opt->value < 0 && // styles >= 0
opt->value != cbSELECTION && // cbSELECTION
opt->value != cbHIGHLIGHT_LINE) // cbHIGHLIGHT_LINE
{
it->second.m_Colours.Remove(opt);
delete opt;
}
else
++i;
}
}
}
/* static */
bool wxDir::Exists(const wxString& dir)
{
return wxDirExists(dir);
}
//=============================================================================
// Function: BuildListFromNN
// Purpose: Append or remove items from the list
// Notes: - There is no way to find all disconnected NN items, or even to find
// all items while determining which are connected and not. So this
// function will find either all items or connected items.
//=============================================================================
static void BuildListFromNN(wxArrayString& list, NETRESOURCE* pResSrc,
unsigned flagsSet, unsigned flagsUnset)
{
HANDLE hEnum;
int rc;
//-----------------------------------------------
// Scope may be all drives or all mounted drives.
//-----------------------------------------------
unsigned scope = RESOURCE_GLOBALNET;
if (flagsSet & wxFS_VOL_MOUNTED)
scope = RESOURCE_CONNECTED;
//----------------------------------------------------------------------
// Enumerate all items, adding only non-containers (ie. network shares).
// Containers cause a recursive call to this function for their own
// enumeration.
//----------------------------------------------------------------------
if (rc = s_pWNetOpenEnum(scope, RESOURCETYPE_DISK, 0, pResSrc, &hEnum), rc == NO_ERROR)
{
DWORD count = 1;
DWORD size = 256;
NETRESOURCE* pRes = (NETRESOURCE*)malloc(size);
memset(pRes, 0, sizeof(NETRESOURCE));
while (rc = s_pWNetEnumResource(hEnum, &count, pRes, &size), rc == NO_ERROR || rc == ERROR_MORE_DATA)
{
if (s_cancelSearch)
break;
if (rc == ERROR_MORE_DATA)
{
pRes = (NETRESOURCE*)realloc(pRes, size);
count = 1;
}
else if (count == 1)
{
// Enumerate the container.
if (pRes->dwUsage & RESOURCEUSAGE_CONTAINER)
{
BuildListFromNN(list, pRes, flagsSet, flagsUnset);
}
// Add the network share.
else
{
wxString filename(pRes->lpRemoteName);
// if the drive is unavailable, FilteredAdd() can hang for
// a long time and, moreover, its failure appears to be not
// cached so this will happen every time we use it, so try
// a much quicker wxDirExists() test (which still hangs but
// for much shorter time) for locally mapped drives first
// to try to avoid this
if ( pRes->lpLocalName &&
*pRes->lpLocalName &&
!wxDirExists(pRes->lpLocalName) )
continue;
if (!filename.empty())
{
if (filename.Last() != '\\')
filename.Append('\\');
// The filter function will not know mounted from unmounted, and neither do we unless
// we are iterating using RESOURCE_CONNECTED, in which case they all are mounted.
// Volumes on disconnected servers, however, will correctly show as unmounted.
FilteredAdd(list, filename.t_str(), flagsSet, flagsUnset&~wxFS_VOL_MOUNTED);
if (scope == RESOURCE_GLOBALNET)
s_fileInfo[filename].m_flags &= ~wxFS_VOL_MOUNTED;
}
}
}
else if (count == 0)
break;
}
free(pRes);
s_pWNetCloseEnum(hEnum);
}
} // BuildListFromNN
//! @brief Initializes the application.
//!
//! It will open the main window and connect default to server or open the connect window.
bool SpringLobbyApp::OnInit()
{
//this triggers the Cli Parser amongst other stuff
if (!wxApp::OnInit())
return false;
SetAppName( m_appname );
if (!m_crash_handle_disable) {
#if wxUSE_ON_FATAL_EXCEPTION
wxHandleFatalExceptions( true );
#endif
#if defined(__WXMSW__) && defined(ENABLE_DEBUG_REPORT)
//this undocumented function acts as a workaround for the dysfunctional
// wxUSE_ON_FATAL_EXCEPTION on msw when mingw is used (or any other non SEH-capable compiler )
SetUnhandledExceptionFilter(filter);
#endif
}
//initialize all loggers, we'll use the returned pointer to set correct parent window later
wxLogChain* logchain = 0;
wxLogWindow *loggerwin = InitializeLoggingTargets( 0, m_log_console, m_log_file_path, m_log_window_show, !m_crash_handle_disable, m_log_verbosity, logchain );
//this needs to called _before_ mainwindow instance is created
wxInitAllImageHandlers();
wxFileSystem::AddHandler(new wxZipFSHandler);
wxSocketBase::Initialize();
#ifdef __WXMSW__
wxString path = wxPathOnly( wxStandardPaths::Get().GetExecutablePath() ) + wxFileName::GetPathSeparator() + _T("locale");
#else
#if defined(LOCALE_INSTALL_DIR)
wxString path ( _T(LOCALE_INSTALL_DIR) );
#else
// use a dummy name here, we're only interested in the base path
wxString path = wxStandardPaths::Get().GetLocalizedResourcesDir(_T("noneWH"),wxStandardPaths::ResourceCat_Messages);
path = path.Left( path.First(_T("noneWH") ) );
#endif
#endif
m_translationhelper = new wxTranslationHelper( *( (wxApp*)this ), path );
m_translationhelper->Load();
if ( !wxDirExists( GetConfigfileDir() ) )
wxMkdir( GetConfigfileDir() );
#ifdef __WXMSW__
sett().SetSearchSpringOnlyInSLPath( sett().GetSearchSpringOnlyInSLPath() );
#endif
sett().SetSpringBinary( sett().GetCurrentUsedSpringIndex(), sett().GetCurrentUsedSpringBinary() );
sett().SetUnitSync( sett().GetCurrentUsedSpringIndex(), sett().GetCurrentUsedUnitSync() );
if ( sett().DoResetPerspectives() )
{
//we do this early on and reset the config var a little later so we can save a def. perps once mw is created
sett().RemoveLayouts();
sett().SetDoResetPerspectives( false );
ui().mw().SavePerspectives( _T("SpringLobby-default") );
}
sett().RefreshSpringVersionList();
//!currently we cannot use the dialog in simple, because it uses Ui and therefore creates mainwindow
if ( !m_start_simple_interface )
//this should take off the firstload time considerably *ie nil it :P )
mapSelectDialog();
//unitsync first load, NEEDS to be blocking
usync().ReloadUnitSyncLib();
#ifndef DISABLE_SOUND
//sound sources/buffer init
sound();
#endif
CacheAndSettingsSetup();
if ( !m_customizer_modname.IsEmpty() ) {
if ( SLcustomizations().Init( m_customizer_modname ) ) {
if ( m_start_simple_interface ) {
SimpleFront* sp = new SimpleFront( 0 );
SetTopWindow( sp );
sp->Show();
return true;
}
ui().mw().SetIcon( SLcustomizations().GetAppIcon() );
}
else {
customMessageBox( 3, _("Couldn't load customizations for ") + m_customizer_modname + _("\nPlease check that that is the correct name, passed in qoutation"), _("Fatal error"), wxOK );
// wxLogError( _("Couldn't load customizations for ") + m_customizer_modname + _("\nPlease check that that is the correct name, passed in qoutation"), _("Fatal error") );
exit( OnExit() );//for some twisted reason returning false here does not terminate the app
}
}
notificationManager(); //needs to be initialized too
ui().ShowMainWindow();
SetTopWindow( &ui().mw() );
if ( sett().DoResetPerspectives() )
{
//now that mainwindow is shown, we can save what is the default layout and remove the flag to reset
sett().SetDoResetPerspectives( false );
ui().mw().SavePerspectives( _T("SpringLobby-default") );
}
//interim fix for resize crashes on metacity and kwin
#ifdef __WXMSW__
mapSelectDialog().Reparent( &ui().mw() );
#endif
ui().FirstRunWelcome();
m_timer->Start( TIMER_INTERVAL );
ui().mw().SetLogWin( loggerwin, logchain );
#ifndef NO_TORRENT_SYSTEM
plasmaInterface();
// plasmaInterface().InitResourceList();
// plasmaInterface().FetchResourceList();
#endif
return true;
}
bool PhdApp::OnInit()
{
if (!wxApp::OnInit())
{
return false;
}
m_instanceChecker = new wxSingleInstanceChecker(wxString::Format("%s.%ld", GetAppName(), m_instanceNumber));
if (m_instanceChecker->IsAnotherRunning())
{
wxLogError(wxString::Format(_("PHD2 instance %ld is already running. Use the "
"-i INSTANCE_NUM command-line option to start a different instance."), m_instanceNumber));
delete m_instanceChecker; // OnExit() won't be called if we return false
m_instanceChecker = 0;
return false;
}
#ifndef DEBUG
#if (wxMAJOR_VERSION > 2 || wxMINOR_VERSION > 8)
wxDisableAsserts();
#endif
#endif
SetVendorName(_T("StarkLabs"));
pConfig = new PhdConfig(_T("PHDGuidingV2"), m_instanceNumber);
Debug.Init("debug", true);
Debug.AddLine(wxString::Format("PHD2 version %s begins execution with:", FULLVER));
Debug.AddLine(wxString::Format(" %s", wxVERSION_STRING));
float dummy;
Debug.AddLine(wxString::Format(" cfitsio %.2lf", ffvers(&dummy)));
#if defined(CV_VERSION)
Debug.AddLine(wxString::Format(" opencv %s", CV_VERSION));
#endif
#if defined(__WINDOWS__)
HRESULT hr = CoInitializeEx(NULL, COINIT_APARTMENTTHREADED);
Debug.AddLine("CoInitializeEx returns %x", hr);
#endif
DisableOSXAppNap();
if (m_resetConfig)
{
pConfig->DeleteAll();
}
wxString ldir = wxStandardPaths::Get().GetResourcesDir() + PATHSEPSTR "locale";
if (!wxDirExists(ldir))
{
// for development environments
ldir = _T("locale");
}
bool ex = wxDirExists(ldir);
Debug.AddLine(wxString::Format("Using Locale Dir %s exists=%d", ldir, ex));
wxLocale::AddCatalogLookupPathPrefix(ldir);
m_localeDir = ldir;
m_locale.Init(pConfig->Global.GetInt("/wxLanguage", wxLANGUAGE_DEFAULT));
if (!m_locale.AddCatalog(PHD_MESSAGES_CATALOG))
{
Debug.AddLine("locale.AddCatalog failed");
}
wxSetlocale(LC_NUMERIC, "C");
pConfig->InitializeProfile();
PhdController::OnAppInit();
wxImage::AddHandler(new wxJPEGHandler);
wxImage::AddHandler(new wxPNGHandler);
pFrame = new MyFrame(m_instanceNumber, &m_locale);
pFrame->Show(true);
if (pConfig->IsNewInstance() || (pConfig->NumProfiles() == 1 && pFrame->pGearDialog->IsEmptyProfile()))
{
pFrame->pGearDialog->ShowProfileWizard(); // First-light version of profile wizard
}
return true;
}
void SpringLobbyApp::CacheAndSettingsSetup()
{
SetSettingsStandAlone( false );
const wxString userConfigDir = GetConfigfileDir();
if ( sett().IsFirstRun() && !wxDirExists( userConfigDir ) )
{
wxMkdir( userConfigDir );
}
if ( (sett().GetCacheVersion() < CACHE_VERSION) && !sett().IsFirstRun() )
{
sett().SetMapCachingThreadProgress( 0 ); // reset map cache thread
sett().SetModCachingThreadProgress( 0 ); // reset mod cache thread
if ( wxDirExists( sett().GetCachePath() ) )
{
wxLogWarning( _T("erasing old cache ver %d (app cache ver %d)"), sett().GetCacheVersion(), CACHE_VERSION );
wxString file = wxFindFirstFile( sett().GetCachePath() + wxFILE_SEP_PATH + _T("*") );
while ( !file.empty() )
{
wxRemoveFile( file );
file = wxFindNextFile();
}
}
}
if ( !sett().IsFirstRun() )
{
int settversion = sett().GetSettingsVersion();
if ( settversion < 3 )
{
sett().ConvertOldSpringDirsOptions();
}
if ( settversion < 4 )
{
if ( sett().GetTorrentPort() == DEFSETT_SPRING_PORT ) sett().SetTorrentPort( DEFSETT_SPRING_PORT + 1 );
}
if ( settversion < 5 )
{
wxArrayString list = sett().GetServers();
int count = list.GetCount();
wxArrayString wordlist = sett().GetHighlightedWords();
for ( int i= 0; i < count; i++ )
{
wxString nick = sett().GetServerAccountNick( list[i] );
if ( wordlist.Index( nick ) == -1 )
{
wordlist.Add( nick );
}
}
sett().SetHighlightedWords( wordlist );
}
if ( settversion < 6 )
{
sett().ConvertOldServerSettings();
}
if ( settversion < 7 )
{
sett().AddChannelJoin( _T("springlobby"), _T("") );
}
if ( settversion < 8 )
{
sett().DeleteServer( _T("Backup server") );
sett().SetServer( _T("Backup server 1"), _T("springbackup1.servegame.com"), 8200 );
sett().SetServer( _T("Backup server 2"), _T("springbackup2.servegame.org"), 8200 );
sett().SetServer( _T("Test server"), _T("taspringmaster.servegame.com"), 8300 );
}
if ( settversion < 10 )
{
sett().ConvertOldColorSettings();
}
if ( settversion < 11 )
{
if( IsUACenabled() )
{
usync().ReloadUnitSyncLib();
if ( usync().IsLoaded() ) usync().SetSpringDataPath(_T("")); // UAC is on, fix the spring data path
}
}
if ( settversion < 12 )
{
sett().ConvertOldChannelSettings();
}
if ( settversion < 13 )
{
sett().ConvertOldHiglightSettings();
}
if ( settversion < 15 )
{
sett().TranslateSavedColumWidths();
}
if ( settversion < 21 )
{
sett().RemoveLayouts();
}
if ( settversion < 18 )
{
//new downloader was introduced
sett().ClearTorrentListToResume();
}
if( settversion < 19 )
{
//the dummy column hack was removed on win
sett().NukeColumnWidths();
}
if ( settversion < 22 )
{
if ( m_translationhelper )
{
// add locale's language code to autojoin
if ( m_translationhelper->GetLocale() )
{
wxString localecode = m_translationhelper->GetLocale()->GetCanonicalName();
if ( localecode.Find(_T("_")) != -1 ) localecode = localecode.BeforeFirst(_T('_'));
if ( localecode == _T("en") ) // we'll skip en for now, maybe in the future we'll reactivate it
sett().AddChannelJoin( localecode, _T("") );
}
}
}
}
if ( sett().ShouldAddDefaultServerSettings() || ( sett().GetSettingsVersion() < 14 && sett().GetServers().Count() < 2 ) )
sett().SetDefaultServerSettings();
if ( sett().ShouldAddDefaultChannelSettings() )
{
sett().AddChannelJoin( _T("main"), _T("") );
sett().AddChannelJoin( _T("newbies"), _T("") );
if ( m_translationhelper )
{
if ( m_translationhelper->GetLocale() )
{
wxString localecode = m_translationhelper->GetLocale()->GetCanonicalName();
if ( localecode.Find(_T("_")) != -1 ) localecode = localecode.BeforeFirst(_T('_'));
sett().AddChannelJoin( localecode, _T("") ); // add locale's language code to autojoin
}
}
}
if ( sett().ShouldAddDefaultGroupSettings() )
{
sett().AddGroup( _("Default") );
sett().AddGroup( _("Ignore PM") );
useractions().ChangeAction( _("Ignore PM"), UserActions::ActIgnorePM );
sett().AddGroup( _("Ignore chat") );
useractions().ChangeAction( _("Ignore chat"), UserActions::ActIgnoreChat );
sett().AddGroup( _("Battle Autokick") );
useractions().ChangeAction( _("Battle Autokick"), UserActions::ActAutokick );
sett().AddGroup( _("Friends") );
useractions().ChangeAction( _("Friends"), UserActions::ActNotifBattle );
useractions().ChangeAction( _("Friends"), UserActions::ActHighlight );
useractions().ChangeAction( _("Friends"), UserActions::ActNotifLogin );
useractions().SetGroupColor( _("Friends"), wxColour( 0, 0, 255 ) );
}
}
static bool SafeMkdir(const wxString& dir)
{
if (!wxDirExists(dir))
return wxMkdir(dir);
return true;
}
bool DirManager::SetProject(wxString & projPath, wxString & projName,
bool create)
{
wxString oldPath = this->projPath;
wxString oldName = this->projName;
wxString oldFull = projFull;
wxString oldLoc = projFull;
if (oldLoc == wxT(""))
oldLoc = mytemp;
if (projPath == wxT(""))
projPath = ::wxGetCwd();
this->projPath = projPath;
this->projName = projName;
this->projFull = projPath + wxFILE_SEP_PATH + projName;
wxString cleanupLoc1=oldLoc;
wxString cleanupLoc2=projFull;
if (create) {
if (!wxDirExists(projFull))
if (!wxMkdir(projFull))
return false;
#ifdef __UNIX__
chmod(OSFILENAME(projFull), 0775);
#endif
} else {
#ifndef __WXMAC__
if (!wxDirExists(projFull))
return false;
#endif
}
/* Move all files into this new directory. Files which are
"locked" get copied instead of moved. (This happens when
we perform a Save As - the files which belonged to the last
saved version of the old project must not be moved,
otherwise the old project would not be safe. */
AudacityProject *p = GetActiveProject();
if (p)
p->ProgressShow(_("Progress"),
_("Saving project data files"));
int total=blockFileHash.size();
int count=0;
BlockHash::iterator i=blockFileHash.begin();
bool success = true;
while(i != blockFileHash.end() && success) {
BlockFile *b = i->second;
if (b->IsLocked())
success = CopyToNewProjectDirectory(b);
else{
success = MoveToNewProjectDirectory(b);
}
if (p)
p->ProgressUpdate(int ((count * 1000.0) / total));
i++;
count++;
}
if (!success) {
// If the move failed, we try to move/copy as many files
// back as possible so that no damage was done. (No sense
// in checking for errors this time around - there's nothing
// that could be done about it.)
// Likely causes: directory was not writeable, disk was full
projFull = oldLoc;
BlockHash::iterator i=blockFileHash.begin();
while(i != blockFileHash.end()) {
BlockFile *b = i->second;
MoveToNewProjectDirectory(b);
if (count>=0 && p)
p->ProgressUpdate(int ((count * 1000.0) / total));
i++;
count--;
}
this->projFull = oldFull;
this->projPath = oldPath;
this->projName = oldName;
if (p)
p->ProgressHide();
return false;
}
if (p)
p->ProgressHide();
// Some subtlety; SetProject is used both to move a temp project
// into a permanent home as well as just set up path variables when
// loading a project; in this latter case, the movement code does
// nothing because SetProject is called before there are any
// blockfiles. Cleanup code trigger is the same
if(blockFileHash.size()>0){
// Clean up after ourselves; look for empty directories in the old
// and new project directories. The easiest way to do this is to
// recurse depth-first and rmdir every directory seen in old and
// new; rmdir will fail on non-empty dirs.
wxArrayString dirlist;
count=rm_dash_rf_enumerate(cleanupLoc1,dirlist,wxEmptyString,0,1);
count+=rm_dash_rf_enumerate(cleanupLoc2,dirlist,wxEmptyString,0,1);
if(count)
rm_dash_rf_execute(dirlist,count,0,1,_("Cleaning up cache directories"));
}
return true;
}
bool vfsDirBase::IsExists(const wxString& path) const
{
return wxDirExists(path);
}
wxString KicadDatasPath()
{
bool found = false;
wxString data_path;
if( Pgm().IsKicadEnvVariableDefined() ) // Path defined by the KICAD environment variable.
{
data_path = Pgm().GetKicadEnvVariable();
found = true;
}
else // Path of executables.
{
wxString tmp = Pgm().GetExecutablePath();
#ifdef __WINDOWS__
tmp.MakeLower();
#endif
if( tmp.Contains( wxT( "kicad" ) ) )
{
#ifdef __WINDOWS__
tmp = Pgm().GetExecutablePath();
#endif
if( tmp.Last() == '/' )
tmp.RemoveLast();
data_path = tmp.BeforeLast( '/' ); // id cd ../
data_path += UNIX_STRING_DIR_SEP;
// Old versions of KiCad use kicad/ as default for data
// and last versions kicad/share/
// So we search for kicad/share/ first
wxString old_path = data_path;
data_path += wxT( "share/" );
if( wxDirExists( data_path ) )
{
found = true;
}
else if( wxDirExists( old_path ) )
{
data_path = old_path;
found = true;
}
}
}
if( !found )
{
// find KiCad from possibilities list:
// /usr/local/kicad/ or c:/kicad/
const static wxChar* possibilities[] = {
#ifdef __WINDOWS__
wxT( "c:/kicad/share/" ),
wxT( "d:/kicad/share/" ),
wxT( "c:/kicad/" ),
wxT( "d:/kicad/" ),
wxT( "c:/Program Files/kicad/share/" ),
wxT( "d:/Program Files/kicad/share/" ),
wxT( "c:/Program Files/kicad/" ),
wxT( "d:/Program Files/kicad/" ),
#else
wxT( "/usr/share/kicad/" ),
wxT( "/usr/local/share/kicad/" ),
wxT( "/usr/local/kicad/share/" ), // default data path for "universal
// tarballs" and build for a server
// (new)
wxT( "/usr/local/kicad/" ), // default data path for "universal
// tarballs" and build for a server
// (old)
#endif
};
for( unsigned i=0; i<DIM(possibilities); ++i )
{
data_path = possibilities[i];
if( wxDirExists( data_path ) )
{
found = true;
break;
}
}
}
if( found )
{
data_path.Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP );
if( data_path.Last() != '/' )
data_path += UNIX_STRING_DIR_SEP;
}
else
{
data_path.Empty();
}
return data_path;
}
bool wxWebUpdateActionExtract::Run() const
{
wxArrayString orig, output;
wxLogUsrMsg(wxT("wxWebUpdateActionExtract::Run - going to extract the file [")
+ m_strFile + wxT("] of type [") + m_strType + wxT("] in [")
+ m_strWhere + wxT("]"));
// wxFileName wants a path separator at the end of directory names
wxString dir(m_strWhere);
if (dir.Last() != wxFileName::GetPathSeparator())
dir += wxFileName::GetPathSeparator();
// be sure that the destination directory exists
wxFileName f(dir), f2(m_strFile);
if (!f.DirExists() || !f2.FileExists()) {
wxLogUsrMsg(wxT("wxWebUpdateActionExtract::Run - the folder \"") + m_strWhere +
wxT("\" or the file \"") + m_strFile + wxT("\" does not exist !"));
return FALSE;
}
// parse the namemap
wxArrayString compressed, extracted;
int count = wxWebUpdateInstaller::Get()->ParsePairValueList(m_strNameMap, compressed, extracted);
// do the substitutions also on the compressed filenames
for (int i=0; i < count; i++)
compressed[i] = wxWebUpdateInstaller::Get()->DoSubstitution(compressed[i]);
// create the archive factory
wxArchiveClassFactory *factory = NULL;
if (m_strType == wxT("zip"))
factory = new wxZipClassFactory;
// extract the package
wxArchiveEntryPtr entry;
wxFFileInputStream input(m_strFile);
wxArchiveInputStream *in = factory->NewStream(input);
delete factory;
while (entry.reset(in->GetNextEntry()), entry.get() != NULL)
{
// access meta-data
wxString name = entry->GetName();
// is this file/dir registered in the name map ?
int idx = compressed.Index(name);
if (idx != wxNOT_FOUND)
name = extracted[idx];
wxString output = dir + name;
// can be different from "dir" if "name" includes a relative path...
wxString outputdir = wxFileName(output).GetPath();
// intercept directories...
if (!wxDirExists(outputdir)) {
if (wxFileName(outputdir).Mkdir(0777, wxPATH_MKDIR_FULL))
wxLogAdvMsg(wxT("wxWebUpdateActionExtract::Run - created the [") +
outputdir + wxT("] folder"));
else
wxLogAdvMsg(wxT("wxWebUpdateActionExtract::Run - could not create the [") +
outputdir + wxT("] folder.. proceeding anyway"));
continue; // this entry contains no data
}
// this is a file...
wxLogUsrMsg(wxT("wxWebUpdateActionExtract::Run - extracting [") + name +
wxT("] as [") + output + wxT("]..."));
// now just dump this entry to a new uncompressed file...
wxFileOutputStream out(output);
if (!out.IsOk() || !out.Write(*in)) {
wxLogUsrMsg(wxT("wxWebUpdateActionExtract::Run - couldn't decompress ") + name);
delete in;
return FALSE;
}
}
delete in;
return TRUE;
}
void MyDialog::OnButton_GA(wxCommandEvent& event )
{
wxString aid=assemblyid->GetValue();
if (aid.IsEmpty())
{
wxLogMessage("Sorry, you have to specify an AssemblyID !");
} else {
wxFileDialog* file_dialog=new wxFileDialog(this,"Save AssemblyPackage as...","","","*.zip",wxSAVE,wxDefaultPosition);
int t=file_dialog->ShowModal();
wxString file;
wxString path;
wxString filename;
if (t==wxID_OK) {
file=file_dialog->GetPath();
path=file_dialog->GetDirectory();
filename=file_dialog->GetFilename();
wxString current_directory=wxGetCwd();
std::vector <AComponentTreeCtrl::fileinfo> filelist=a_TreeCtrl->getFiles();
std::vector <AComponentTreeCtrl::fileinfo> ::iterator iter;
for(iter = filelist.begin();
iter != filelist.end();
iter++)
{
AComponentTreeCtrl::fileinfo finfo=(*iter);
if (!(wxDirExists("tempqxml")))
{
wxMkdir("tempqxml");
}
//wxSetWorkingDirectory(current_directory.Append("tempqxml"));
wxString temp="tempqxml/";
wxCopyFile(finfo.link,temp.Append(finfo.filename), TRUE);
}
if (!(wxDirExists("tempqxml/meta-inf")))
{
wxMkdir("tempqxml/meta-inf");
}
// copy the instantiation properties fillearchives
p_TreeCtrl->copy_filearchive("tempqxml/meta-inf");
wxString cadfile="tempqxml/meta-inf/";
cadfile.Append(filename);
cadfile.Replace(".zip",".cad",TRUE);
wxFile* outputfile = new wxFile(cadfile,wxFile::write);
outputfile->Write(getOutputText().c_str(),wxConvLibc);
outputfile->Close();
wxString newDirectory=current_directory;
newDirectory.Append("\\");
newDirectory.Append("tempqxml");
wxSetWorkingDirectory(newDirectory);
//bool value;
wxProcess *process = new wxProcess(this);
wxString cmd = "zip -u ";
cmd.append(filename);
cmd.append(" ");
cmd.append("*.*");
std::cout << cmd.c_str() << std::endl;
wxExecute(cmd, wxEXEC_SYNC, NULL);
cadfile.Replace("tempqxml/","",TRUE);
wxString cmd2 = "zip -u ";
cmd2.append(filename);
cmd2.append(" ");
cmd2.append("meta-inf/*.*");
wxExecute(cmd2, wxEXEC_SYNC, NULL);
delete process;
wxCopyFile(filename,file, TRUE);
wxRemoveFile(filename);
for(iter = filelist.begin();
iter != filelist.end();
iter++)
{
AComponentTreeCtrl::fileinfo finfo=(*iter);
wxRemoveFile(finfo.filename);
}
p_TreeCtrl->remove_files();
wxRemoveFile(cadfile);
wxRmdir("meta-inf");
}
file_dialog->~wxFileDialog();
}
}