static void __init init_hvm_pv_info(void)
{
int major, minor;
uint32_t eax, ebx, ecx, edx, base;
base = xen_cpuid_base();
eax = cpuid_eax(base + 1);
major = eax >> 16;
minor = eax & 0xffff;
printk(KERN_INFO "Xen version %d.%d.\n", major, minor);
xen_domain_type = XEN_HVM_DOMAIN;
/* PVH set up hypercall page in xen_prepare_pvh(). */
if (xen_pvh_domain())
pv_info.name = "Xen PVH";
else {
u64 pfn;
uint32_t msr;
pv_info.name = "Xen HVM";
msr = cpuid_ebx(base + 2);
pfn = __pa(hypercall_page);
wrmsr_safe(msr, (u32)pfn, (u32)(pfn >> 32));
}
xen_setup_features();
cpuid(base + 4, &eax, &ebx, &ecx, &edx);
if (eax & XEN_HVM_CPUID_VCPU_ID_PRESENT)
this_cpu_write(xen_vcpu_id, ebx);
else
this_cpu_write(xen_vcpu_id, smp_processor_id());
}
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
pgd_t *pgd;
if (!xen_start_info)
return;
xen_domain_type = XEN_PV_DOMAIN;
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
pv_time_ops = xen_time_ops;
pv_cpu_ops = xen_cpu_ops;
pv_apic_ops = xen_apic_ops;
pv_mmu_ops = xen_mmu_ops;
#ifdef CONFIG_X86_64
/*
* Setup percpu state. We only need to do this for 64-bit
* because 32-bit already has %fs set properly.
*/
load_percpu_segment(0);
#endif
xen_init_irq_ops();
xen_init_cpuid_mask();
#ifdef CONFIG_X86_LOCAL_APIC
/*
* set up the basic apic ops.
*/
set_xen_basic_apic_ops();
#endif
xen_setup_features();
if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
}
machine_ops = xen_machine_ops;
/*
* The only reliable way to retain the initial address of the
* percpu gdt_page is to remember it here, so we can go and
* mark it RW later, when the initial percpu area is freed.
*/
xen_initial_gdt = &per_cpu(gdt_page, 0);
xen_smp_init();
/* Get mfn list */
if (!xen_feature(XENFEAT_auto_translated_physmap))
xen_build_dynamic_phys_to_machine();
pgd = (pgd_t *)xen_start_info->pt_base;
/* Prevent unwanted bits from being set in PTEs. */
__supported_pte_mask &= ~_PAGE_GLOBAL;
if (!xen_initial_domain())
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
#ifdef CONFIG_X86_64
/* Work out if we support NX */
check_efer();
#endif
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
local_irq_disable();
early_boot_irqs_off();
xen_raw_console_write("mapping kernel into physical memory\n");
pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
init_mm.pgd = pgd;
/* keep using Xen gdt for now; no urgent need to change it */
pv_info.kernel_rpl = 1;
if (xen_feature(XENFEAT_supervisor_mode_kernel))
pv_info.kernel_rpl = 0;
/* set the limit of our address space */
xen_reserve_top();
#ifdef CONFIG_X86_32
/* set up basic CPUID stuff */
cpu_detect(&new_cpu_data);
new_cpu_data.hard_math = 1;
new_cpu_data.wp_works_ok = 1;
new_cpu_data.x86_capability[0] = cpuid_edx(1);
#endif
/* Poke various useful things into boot_params */
boot_params.hdr.type_of_loader = (9 << 4) | 0;
boot_params.hdr.ramdisk_image = xen_start_info->mod_start
? __pa(xen_start_info->mod_start) : 0;
boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
if (!xen_initial_domain()) {
add_preferred_console("xenboot", 0, NULL);
add_preferred_console("tty", 0, NULL);
add_preferred_console("hvc", 0, NULL);
}
xen_raw_console_write("about to get started...\n");
/* Start the world */
#ifdef CONFIG_X86_32
i386_start_kernel();
#else
x86_64_start_reservations((char *)__pa_symbol(&boot_params));
#endif
}
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
pgd_t *pgd;
if (!xen_start_info)
return;
xen_domain_type = XEN_PV_DOMAIN;
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
pv_time_ops = xen_time_ops;
pv_cpu_ops = xen_cpu_ops;
pv_apic_ops = xen_apic_ops;
x86_init.resources.memory_setup = xen_memory_setup;
x86_init.oem.arch_setup = xen_arch_setup;
x86_init.oem.banner = xen_banner;
x86_init.timers.timer_init = xen_time_init;
x86_init.timers.setup_percpu_clockev = x86_init_noop;
x86_cpuinit.setup_percpu_clockev = x86_init_noop;
x86_platform.calibrate_tsc = xen_tsc_khz;
x86_platform.get_wallclock = xen_get_wallclock;
x86_platform.set_wallclock = xen_set_wallclock;
/*
* Set up some pagetable state before starting to set any ptes.
*/
xen_init_mmu_ops();
/* Prevent unwanted bits from being set in PTEs. */
__supported_pte_mask &= ~_PAGE_GLOBAL;
if (!xen_initial_domain())
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
__supported_pte_mask |= _PAGE_IOMAP;
/*
* Prevent page tables from being allocated in highmem, even
* if CONFIG_HIGHPTE is enabled.
*/
__userpte_alloc_gfp &= ~__GFP_HIGHMEM;
#ifdef CONFIG_X86_64
/* Work out if we support NX */
check_efer();
#endif
xen_setup_features();
/* Get mfn list */
if (!xen_feature(XENFEAT_auto_translated_physmap))
xen_build_dynamic_phys_to_machine();
/*
* Set up kernel GDT and segment registers, mainly so that
* -fstack-protector code can be executed.
*/
xen_setup_stackprotector();
xen_init_irq_ops();
xen_init_cpuid_mask();
#ifdef CONFIG_X86_LOCAL_APIC
/*
* set up the basic apic ops.
*/
set_xen_basic_apic_ops();
#endif
if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
}
machine_ops = xen_machine_ops;
/*
* The only reliable way to retain the initial address of the
* percpu gdt_page is to remember it here, so we can go and
* mark it RW later, when the initial percpu area is freed.
*/
xen_initial_gdt = &per_cpu(gdt_page, 0);
xen_smp_init();
pgd = (pgd_t *)xen_start_info->pt_base;
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
local_irq_disable();
early_boot_irqs_off();
xen_raw_console_write("mapping kernel into physical memory\n");
pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
init_mm.pgd = pgd;
/* keep using Xen gdt for now; no urgent need to change it */
pv_info.kernel_rpl = 1;
if (xen_feature(XENFEAT_supervisor_mode_kernel))
pv_info.kernel_rpl = 0;
/* set the limit of our address space */
xen_reserve_top();
#ifdef CONFIG_X86_32
/* set up basic CPUID stuff */
cpu_detect(&new_cpu_data);
new_cpu_data.hard_math = 1;
new_cpu_data.wp_works_ok = 1;
new_cpu_data.x86_capability[0] = cpuid_edx(1);
#endif
/* Poke various useful things into boot_params */
boot_params.hdr.type_of_loader = (9 << 4) | 0;
boot_params.hdr.ramdisk_image = xen_start_info->mod_start
? __pa(xen_start_info->mod_start) : 0;
boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
if (!xen_initial_domain()) {
add_preferred_console("xenboot", 0, NULL);
add_preferred_console("tty", 0, NULL);
add_preferred_console("hvc", 0, NULL);
}
xen_raw_console_write("about to get started...\n");
xen_setup_runstate_info(0);
/* Start the world */
#ifdef CONFIG_X86_32
i386_start_kernel();
#else
x86_64_start_reservations((char *)__pa_symbol(&boot_params));
#endif
}
static int __init xen_guest_init(void)
{
struct xen_add_to_physmap xatp;
static struct shared_info *shared_info_page = 0;
struct device_node *node;
int len;
const char *s = NULL;
const char *version = NULL;
const char *xen_prefix = "xen,xen-";
struct resource res;
node = of_find_compatible_node(NULL, NULL, "xen,xen");
if (!node) {
pr_debug("No Xen support\n");
return 0;
}
s = of_get_property(node, "compatible", &len);
if (strlen(xen_prefix) + 3 < len &&
!strncmp(xen_prefix, s, strlen(xen_prefix)))
version = s + strlen(xen_prefix);
if (version == NULL) {
pr_debug("Xen version not found\n");
return 0;
}
if (of_address_to_resource(node, GRANT_TABLE_PHYSADDR, &res))
return 0;
xen_hvm_resume_frames = res.start >> PAGE_SHIFT;
xen_events_irq = irq_of_parse_and_map(node, 0);
pr_info("Xen %s support found, events_irq=%d gnttab_frame_pfn=%lx\n",
version, xen_events_irq, xen_hvm_resume_frames);
xen_domain_type = XEN_HVM_DOMAIN;
xen_setup_features();
if (xen_feature(XENFEAT_dom0))
xen_start_info->flags |= SIF_INITDOMAIN|SIF_PRIVILEGED;
else
xen_start_info->flags &= ~(SIF_INITDOMAIN|SIF_PRIVILEGED);
if (!shared_info_page)
shared_info_page = (struct shared_info *)
get_zeroed_page(GFP_KERNEL);
if (!shared_info_page) {
pr_err("not enough memory\n");
return -ENOMEM;
}
xatp.domid = DOMID_SELF;
xatp.idx = 0;
xatp.space = XENMAPSPACE_shared_info;
xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT;
if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp))
BUG();
HYPERVISOR_shared_info = (struct shared_info *)shared_info_page;
/* xen_vcpu is a pointer to the vcpu_info struct in the shared_info
* page, we use it in the event channel upcall and in some pvclock
* related functions.
* The shared info contains exactly 1 CPU (the boot CPU). The guest
* is required to use VCPUOP_register_vcpu_info to place vcpu info
* for secondary CPUs as they are brought up.
* For uniformity we use VCPUOP_register_vcpu_info even on cpu0.
*/
xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info),
sizeof(struct vcpu_info));
if (xen_vcpu_info == NULL)
return -ENOMEM;
gnttab_init();
if (!xen_initial_domain())
xenbus_probe(NULL);
return 0;
}
void __init xen_start_kernel(void)
{
unsigned int i;
struct xen_machphys_mapping mapping;
unsigned long machine_to_phys_nr_ents;
#ifdef CONFIG_X86_32
struct xen_platform_parameters pp;
extern pte_t swapper_pg_fixmap[PTRS_PER_PTE];
unsigned long addr;
#endif
xen_setup_features();
if (HYPERVISOR_memory_op(XENMEM_machphys_mapping, &mapping) == 0) {
machine_to_phys_mapping = (unsigned long *)mapping.v_start;
machine_to_phys_nr_ents = mapping.max_mfn + 1;
} else
machine_to_phys_nr_ents = MACH2PHYS_NR_ENTRIES;
while ((1UL << machine_to_phys_order) < machine_to_phys_nr_ents )
machine_to_phys_order++;
if (!xen_feature(XENFEAT_auto_translated_physmap))
phys_to_machine_mapping =
(unsigned long *)xen_start_info->mfn_list;
WARN_ON(HYPERVISOR_vm_assist(VMASST_CMD_enable,
VMASST_TYPE_writable_pagetables));
reserve_early(ALIGN(__pa_symbol(&_end), PAGE_SIZE),
__pa(xen_start_info->pt_base)
+ (xen_start_info->nr_pt_frames << PAGE_SHIFT),
"Xen provided");
#ifdef CONFIG_X86_32
WARN_ON(HYPERVISOR_vm_assist(VMASST_CMD_enable,
VMASST_TYPE_4gb_segments));
init_mm.pgd = swapper_pg_dir = (pgd_t *)xen_start_info->pt_base;
if (HYPERVISOR_xen_version(XENVER_platform_parameters, &pp) == 0) {
hypervisor_virt_start = pp.virt_start;
reserve_top_address(0UL - pp.virt_start);
}
BUG_ON(pte_index(hypervisor_virt_start));
/* Do an early initialization of the fixmap area */
make_lowmem_page_readonly(swapper_pg_fixmap, XENFEAT_writable_page_tables);
addr = __fix_to_virt(FIX_EARLYCON_MEM_BASE);
set_pmd(pmd_offset(pud_offset(swapper_pg_dir + pgd_index(addr),
addr),
addr),
__pmd(__pa_symbol(swapper_pg_fixmap) | _PAGE_TABLE));
#else
check_efer();
xen_init_pt();
#endif
#define __FIXADDR_TOP (-PAGE_SIZE)
#define pmd_index(addr) (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
#define FIX_BUG_ON(fix) BUILD_BUG_ON(pmd_index(__fix_to_virt(FIX_##fix)) \
!= pmd_index(__fix_to_virt(FIX_EARLYCON_MEM_BASE)))
FIX_BUG_ON(SHARED_INFO);
FIX_BUG_ON(ISAMAP_BEGIN);
FIX_BUG_ON(ISAMAP_END);
#undef pmd_index
#undef __FIXADDR_TOP
/* Switch to the real shared_info page, and clear the dummy page. */
set_fixmap(FIX_SHARED_INFO, xen_start_info->shared_info);
HYPERVISOR_shared_info = (shared_info_t *)fix_to_virt(FIX_SHARED_INFO);
memset(empty_zero_page, 0, sizeof(empty_zero_page));
setup_vcpu_info(0);
/* Set up mapping of lowest 1MB of physical memory. */
for (i = 0; i < NR_FIX_ISAMAPS; i++)
if (is_initial_xendomain())
set_fixmap(FIX_ISAMAP_BEGIN - i, i * PAGE_SIZE);
else
__set_fixmap(FIX_ISAMAP_BEGIN - i,
virt_to_machine(empty_zero_page),
PAGE_KERNEL_RO);
}