/*----------------------------------------------------------------------
Actually set up the tty driver (UNIX)
Args: state -- which state to put it in. 1 means go into raw, 0 out of
Result: returns 0 if successful and < 0 if not.
----*/
int
PineRaw(int state)
{
int result;
result = Raw(state);
if(result == 0 && state == 1){
/*
* Only go into 8 bit mode if we are doing something other
* than plain ASCII. This will save the folks that have
* their parity on their serial lines wrong the trouble of
* getting it right
*/
if((ps_global->keyboard_charmap && ps_global->keyboard_charmap[0] &&
strucmp(ps_global->keyboard_charmap, "us-ascii"))
|| (ps_global->display_charmap && ps_global->display_charmap[0] &&
strucmp(ps_global->display_charmap, "us-ascii")))
bit_strip_off();
#ifdef DEBUG
if(debug < 9) /* only on if full debugging set */
#endif
quit_char_off();
ps_global->low_speed = ttisslow();
crlf_proc(0);
xonxoff_proc(F_ON(F_PRESERVE_START_STOP, ps_global));
}
return(result);
}
/*
* ttopen - this function is called once to set up the terminal device
* streams. if called as pine composer, don't mess with
* tty modes, but set signal handlers.
*/
int
ttopen(void)
{
if(Pmaster == NULL){
Raw(1);
#ifdef MOUSE
if(gmode & MDMOUSE)
init_mouse();
#endif /* MOUSE */
xonxoff_proc(preserve_start_stop);
}
picosigs();
return(1);
}
/*----------------------------------------------------------------------
Close printer
If we're piping to a spooler close down the pipe and wait for the process
to finish. If we're sending to an attached printer send the escape sequence.
Also let the user know the result of the print
----*/
void
close_printer(void)
{
#ifndef _WINDOWS
if(trailer){
if(*trailer)
fputs(trailer, ps_global->print->fp);
fs_give((void **)&trailer);
}
if(ps_global->print->fp == stdout) {
if(ansi_off)
fputs("\033[4i", stdout);
else
printf("%c", 20); /* aux off for wyse60 */
fflush(stdout);
if(F_OFF(F_PRESERVE_START_STOP, ps_global))
xonxoff_proc(0); /* turn off XON/XOFF */
crlf_proc(0); /* turn off CF->LF xlantion */
} else {
(void) close_system_pipe(&ps_global->print->pipe, NULL, pipe_callback);
display_output_file(ps_global->print->result, "PRINT", NULL, 1);
if(ps_global->print && ps_global->print->result)
fs_give((void **) &ps_global->print->result);
}
#else /* _WINDOWS */
mswin_print_done();
#endif /* _WINDOWS */
if(ps_global->print)
fs_give((void **) &ps_global->print);
q_status_message(SM_ASYNC, 0, 3, "Print command completed");
display_message('x');
}
/*----------------------------------------------------------------------
Open the printer
Args: desc -- Description of item to print. Should have one trailing blank.
Return value: < 0 is a failure.
0 a success.
This does most of the work of popen so we can save the standard output of the
command we execute and send it back to the user.
----*/
int
open_printer(char *desc)
{
#ifndef _WINDOWS
char command[201], prompt[200];
int cmd, rc, just_one;
char *p, *init, *nick;
char aname[100], wname[100];
char *printer;
int done = 0, i, lastprinter, cur_printer = 0;
HelpType help;
char **list;
static ESCKEY_S ekey[] = {
/* TRANSLATORS: these are command labels for printing screen */
{'y', 'y', "Y", N_("Yes")},
{'n', 'n', "N", N_("No")},
/* TRANSLATORS: go to Previous Printer in list */
{ctrl('P'), 10, "^P", N_("Prev Printer")},
{ctrl('N'), 11, "^N", N_("Next Printer")},
{-2, 0, NULL, NULL},
/* TRANSLATORS: use Custom Print command */
{'c', 'c', "C", N_("CustomPrint")},
{KEY_UP, 10, "", ""},
{KEY_DOWN, 11, "", ""},
{-1, 0, NULL, NULL}};
#define PREV_KEY 2
#define NEXT_KEY 3
#define CUSTOM_KEY 5
#define UP_KEY 6
#define DOWN_KEY 7
trailer = NULL;
init = NULL;
nick = NULL;
command[sizeof(command)-1] = '\0';
if(ps_global->VAR_PRINTER == NULL){
q_status_message(SM_ORDER | SM_DING, 3, 5,
"No printer has been chosen. Use SETUP on main menu to make choice.");
return(-1);
}
/* Is there just one print command available? */
just_one = (ps_global->printer_category!=3&&ps_global->printer_category!=2)
|| (ps_global->printer_category == 2
&& !(ps_global->VAR_STANDARD_PRINTER
&& ps_global->VAR_STANDARD_PRINTER[0]
&& ps_global->VAR_STANDARD_PRINTER[1]))
|| (ps_global->printer_category == 3
&& !(ps_global->VAR_PERSONAL_PRINT_COMMAND
&& ps_global->VAR_PERSONAL_PRINT_COMMAND[0]
&& ps_global->VAR_PERSONAL_PRINT_COMMAND[1]));
if(F_ON(F_CUSTOM_PRINT, ps_global))
ekey[CUSTOM_KEY].ch = 'c'; /* turn this key on */
else
ekey[CUSTOM_KEY].ch = -2; /* turn this key off */
if(just_one){
ekey[PREV_KEY].ch = -2; /* turn these keys off */
ekey[NEXT_KEY].ch = -2;
ekey[UP_KEY].ch = -2;
ekey[DOWN_KEY].ch = -2;
}
else{
ekey[PREV_KEY].ch = ctrl('P'); /* turn these keys on */
ekey[NEXT_KEY].ch = ctrl('N');
ekey[UP_KEY].ch = KEY_UP;
ekey[DOWN_KEY].ch = KEY_DOWN;
/*
* count how many printers in list and find the default in the list
*/
if(ps_global->printer_category == 2)
list = ps_global->VAR_STANDARD_PRINTER;
else
list = ps_global->VAR_PERSONAL_PRINT_COMMAND;
for(i = 0; list[i]; i++)
if(strcmp(ps_global->VAR_PRINTER, list[i]) == 0)
cur_printer = i;
lastprinter = i - 1;
}
help = NO_HELP;
ps_global->mangled_footer = 1;
while(!done){
if(init)
fs_give((void **)&init);
if(trailer)
fs_give((void **)&trailer);
if(just_one)
printer = ps_global->VAR_PRINTER;
else
printer = list[cur_printer];
parse_printer(printer, &nick, &p, &init, &trailer, NULL, NULL);
strncpy(command, p, sizeof(command)-1);
command[sizeof(command)-1] = '\0';
fs_give((void **)&p);
/* TRANSLATORS: Print something1 using something2.
For example, Print configuration using printer three. */
snprintf(prompt, sizeof(prompt), _("Print %s using \"%s\" ? "),
desc ? desc : "",
*nick ? nick : command);
prompt[sizeof(prompt)-1] = '\0';
fs_give((void **)&nick);
cmd = radio_buttons(prompt, -FOOTER_ROWS(ps_global),
ekey, 'y', 'x', help, RB_NORM);
switch(cmd){
case 'y':
q_status_message1(SM_ORDER, 0, 9,
"Printing with command \"%s\"", command);
done++;
break;
case 10:
cur_printer = (cur_printer>0)
? (cur_printer-1)
: lastprinter;
break;
case 11:
cur_printer = (cur_printer<lastprinter)
? (cur_printer+1)
: 0;
break;
case 'n':
case 'x':
done++;
break;
case 'c':
done++;
break;
default:
break;
}
}
if(cmd == 'c'){
if(init)
fs_give((void **)&init);
if(trailer)
fs_give((void **)&trailer);
snprintf(prompt, sizeof(prompt), "Enter custom command : ");
prompt[sizeof(prompt)-1] = '\0';
command[0] = '\0';
rc = 1;
help = NO_HELP;
while(rc){
int flags = OE_APPEND_CURRENT;
rc = optionally_enter(command, -FOOTER_ROWS(ps_global), 0,
sizeof(command), prompt, NULL, help, &flags);
if(rc == 1){
cmd = 'x';
rc = 0;
}
else if(rc == 3)
help = (help == NO_HELP) ? h_custom_print : NO_HELP;
else if(rc == 0){
removing_trailing_white_space(command);
removing_leading_white_space(command);
q_status_message1(SM_ORDER, 0, 9,
"Printing with command \"%s\"", command);
}
}
}
if(cmd == 'x' || cmd == 'n'){
q_status_message(SM_ORDER, 0, 2, "Print cancelled");
if(init)
fs_give((void **)&init);
if(trailer)
fs_give((void **)&trailer);
return(-1);
}
display_message('x');
ps_global->print = (PRINT_S *)fs_get(sizeof(PRINT_S));
memset(ps_global->print, 0, sizeof(PRINT_S));
strncpy(aname, ANSI_PRINTER, sizeof(aname)-1);
aname[sizeof(aname)-1] = '\0';
strncat(aname, "-no-formfeed", sizeof(aname)-strlen(aname)-1);
strncpy(wname, WYSE_PRINTER, sizeof(wname)-1);
wname[sizeof(wname)-1] = '\0';
strncat(wname, "-no-formfeed", sizeof(wname)-strlen(wname)-1);
if(strucmp(command, ANSI_PRINTER) == 0
|| strucmp(command, aname) == 0
|| strucmp(command, WYSE_PRINTER) == 0
|| strucmp(command, wname) == 0){
/*----------- Attached printer ---------*/
q_status_message(SM_ORDER, 0, 9,
"Printing to attached desktop printer...");
display_message('x');
xonxoff_proc(1); /* make sure XON/XOFF used */
crlf_proc(1); /* AND LF->CR xlation */
if(strucmp(command, ANSI_PRINTER) == 0
|| strucmp(command, aname) == 0){
fputs("\033[5i", stdout);
ansi_off = 1;
}
else{
ansi_off = 0;
printf("%c", 18); /* aux on for wyse60,
Chuck Everett <*****@*****.**> */
}
ps_global->print->fp = stdout;
if(strucmp(command, ANSI_PRINTER) == 0
|| strucmp(command, WYSE_PRINTER) == 0){
/* put formfeed at the end of the trailer string */
if(trailer){
int len = strlen(trailer);
fs_resize((void **)&trailer, len+2);
trailer[len] = '\f';
trailer[len+1] = '\0';
}
else
trailer = cpystr("\f");
}
}
else{
/*----------- Print by forking off a UNIX command ------------*/
dprint((4, "Printing using command \"%s\"\n",
command ? command : "?"));
ps_global->print->result = temp_nam(NULL, "pine_prt");
if(ps_global->print->result &&
(ps_global->print->pipe = open_system_pipe(command,
&ps_global->print->result, NULL,
PIPE_WRITE | PIPE_STDERR, 0,
pipe_callback, NULL))){
ps_global->print->fp = ps_global->print->pipe->out.f;
}
else{
if(ps_global->print->result){
our_unlink(ps_global->print->result);
fs_give((void **)&ps_global->print->result);
}
q_status_message1(SM_ORDER | SM_DING, 3, 4,
"Error opening printer: %s",
error_description(errno));
dprint((2, "Error popening printer \"%s\"\n",
error_description(errno)));
if(init)
fs_give((void **)&init);
if(trailer)
fs_give((void **)&trailer);
return(-1);
}
}
ps_global->print->err = 0;
if(init){
if(*init)
fputs(init, ps_global->print->fp);
fs_give((void **)&init);
}
cb.cbuf[0] = '\0';
cb.cbufp = cb.cbuf;
cb.cbufend = cb.cbuf;
#else /* _WINDOWS */
int status;
LPTSTR desclpt = NULL;
if(desc)
desclpt = utf8_to_lptstr(desc);
if (status = mswin_print_ready (0, desclpt)) {
q_status_message1(SM_ORDER | SM_DING, 3, 4,
"Error starting print job: %s",
mswin_print_error(status));
if(desclpt)
fs_give((void **) &desclpt);
return(-1);
}
if(desclpt)
fs_give((void **) &desclpt);
q_status_message(SM_ORDER, 0, 9, "Printing to windows printer...");
display_message('x');
/* init print control structure */
ps_global->print = (PRINT_S *)fs_get(sizeof(PRINT_S));
memset(ps_global->print, 0, sizeof(PRINT_S));
ps_global->print->err = 0;
#endif /* _WINDOWS */
return(0);
}