Ejemplos de yas_bma250_read_reg en C++ (Cpp)

Ejemplo n.º 1

Archivo: yas_acc_driver-bma25x.c Proyecto: 791254467/u8500_kernel

static int yas_bma250_measure(int *out_data, int *out_raw)
{
	struct yas_bma250_acceleration accel;
	unsigned char buf[6];
	int32_t raw[3], data[3];
	int pos = acc_data.position;
	int i, j;
#if 0
	int32_t sec;
	int32_t msec;
#endif

	/* Check initialize */
	if (acc_data.initialize == 0)
		return YAS_ERROR_NOT_INITIALIZED;

	/* Read acceleration data */
	if (yas_bma250_read_reg(YAS_BMA250_ACC_REG, buf, 6) != 0) {
		for (i = 0; i < 3; i++)
			raw[i] = 0;
	} else {
		if (acc_data.chip_id == YAS_BMA250_CHIP_ID_254)
			for (i = 0; i < 3; i++)
				raw[i] = ((int16_t)((buf[i*2+1] << 8)) |
					  (buf[i*2] & 0xfe)) >> 4;
		else
			for (i = 0; i < 3; i++)
				raw[i] = ((int16_t)((buf[i*2+1] << 8)) |
					  (buf[i*2] & 0xfe)) >> 6;
	}

Ejemplo n.º 2

static int yas_bma250_read_reg_byte(unsigned char adr)
{
unsigned char buf = 0xff;
int err;
err = yas_bma250_read_reg(adr, &buf, 1);
if (err == 0)
	return buf;
return 0;
}

Ejemplo n.º 3

Archivo: yas_acc_driver-bma250.c Proyecto: SerenityS/IM-A800S_Kernel

static int yas_bma250_measure(int *out_data, int *out_raw)
{
    struct yas_bma250_acceleration accel;
    unsigned char buf[6];
    int32_t raw[3], data[3];
    int pos = acc_data.position;
    int i,j;

    /* Check initialize */
    if (acc_data.initialize == 0) {
        return YAS_ERROR_NOT_INITIALIZED;
    }

    /* Read acceleration data */
    if (yas_bma250_read_reg(YAS_BMA250_ACC_REG, buf, 6) != 0) {
        for (i = 0; i < 3; i++) raw[i] = 0;
    } else {
        for (i = 0; i < 3; i++) raw[i] = ((int16_t)((buf[i*2+1] << 8)) | (buf[i*2] & 0xfe)) >> 6;
    }

    /* for X, Y, Z axis */
    for (i = 0; i < 3; i++) {
        /* coordinate transformation */
        data[i] = 0;
        for (j = 0; j < 3; j++) {
            data[i] += raw[j] * yas_bma250_position_map[pos][i][j];
        }
        /* normalization */
        data[i] *= (YAS_BMA250_GRAVITY_EARTH / YAS_BMA250_RESOLUTION);
    }

    yas_bma250_data_filter(data, raw, &accel);

    out_data[0] = accel.x - acc_data.offset.v[0];
    out_data[1] = accel.y - acc_data.offset.v[1];
    out_data[2] = accel.z - acc_data.offset.v[2];
    out_raw[0] = accel.x_raw;
    out_raw[1] = accel.y_raw;
    out_raw[2] = accel.z_raw;
    acc_data.last = accel;

    return YAS_NO_ERROR;
}

Ejemplo n.º 4

static int yas_bma250_measure(int *out_data, int *out_raw)
{
	struct yas_bma250_acceleration accel;
	unsigned char buf[6];
	int32_t raw[3], data[3];
	int pos = acc_data.position;
	int i;
	int j;

	/* Transformation matrix for chip mounting position */
	static const int yas_bma250_position_map[][3][3] = {
		{{ 0, -1,  0}, { 1,  0,  0}, { 0,  0,  1} },
		{{ 1,  0,  0}, { 0,  1,  0}, { 0,  0,  1} },
		{{ 0,  1,  0}, {-1,  0,  0}, { 0,  0,  1} },
		{{-1,  0,  0}, { 0, -1,  0}, { 0,  0,  1} },
		{{ 0,  1,  0}, { 1,  0,  0}, { 0,  0, -1} },
		{{-1,  0,  0}, { 0,  1,  0}, { 0,  0, -1} },
		{{ 0, -1,  0}, {-1,  0,  0}, { 0,  0, -1} },
		{{ 1,  0,  0}, { 0, -1,  0}, { 0,  0, -1} },
	};

	/* Check initialize */
	if (acc_data.initialize == 0)
		return YAS_ERROR_NOT_INITIALIZED;

	/* Read acceleration data */
	if (yas_bma250_read_reg(YAS_BMA250_ACC_REG, buf, 6) != 0)
		for (i = 0; i < 3; i++)
			raw[i] = 0;
	else {
		if (acc_data.chip_id == YAS_BMA250_CHIP_ID)
			for (i = 0; i < 3; i++)
				raw[i] =
					((int16_t)((buf[i*2+1] << 8))
						| (buf[i*2] & 0xfe)) >> 6;
		else
			for (i = 0; i < 3; i++)
				raw[i] =
					((int16_t)((buf[i*2+1] << 8))
						| (buf[i*2] & 0xfe)) >> 4;
	}