void TCellDiffusionForce<DIM>::AddForceContribution(AbstractCellPopulation<DIM>& rCellPopulation)
{
double dt = SimulationTime::Instance()->GetTimeStep();
// Iterate over the nodes
for (typename AbstractMesh<DIM, DIM>::NodeIterator node_iter = rCellPopulation.rGetMesh().GetNodeIteratorBegin();
node_iter != rCellPopulation.rGetMesh().GetNodeIteratorEnd();
++node_iter)
{
// Get the radius of this node
unsigned node_index = node_iter->GetIndex();
double node_radius = node_iter->GetRadius();
// Get cell associated with this index
CellPtr p_cell = rCellPopulation.GetCellUsingLocationIndex(node_index);
// Reject if no radius has been set
if (node_radius == 0.0)
{
EXCEPTION("SetRadius() must be called on each Node before calling TCellDiffusionForce::AddForceContribution() to avoid a division by zero error");
}
// If the selected cell is a Unlabelled Differentiated T Cell, apply diffusion force contribution.
if ( (p_cell->GetMutationState()->IsType<TCellMutationState>()) && (p_cell->GetCellProliferativeType()->IsType<DifferentiatedCellProliferativeType>())
&& !(p_cell->HasCellProperty<CellLabel>()) )
{
double nu = dynamic_cast<AbstractOffLatticeCellPopulation<DIM>*>(&rCellPopulation)->GetDampingConstant(node_index);
/* Compute the diffusion coefficient D as D = k*T/(6*pi*eta*r), where
*
* k = Boltzmann's constant,
* T = absolute temperature,
* eta = dynamic viscosity,
* r = cell radius. */
double diffusion_const_scaling = GetDiffusionScalingConstant();
double diffusion_constant = diffusion_const_scaling/node_radius;
c_vector<double, DIM> force_contribution;
for (unsigned i=0; i<DIM; i++)
{
/* The force on this cell is scaled with the timestep such that when it is
* used in the discretised equation of motion for the cell, we obtain the
* correct formula
*
* x_new = x_old + sqrt(2*D*dt)*W
*
* where W is a standard normal random variable. */
double xi = RandomNumberGenerator::Instance()->StandardNormalRandomDeviate();
force_contribution[i] = mStrengthParameter * ((nu*sqrt(2.0*diffusion_constant*dt)/dt)*xi);
}
node_iter->AddAppliedForceContribution(force_contribution);
}
}
}
void DeltaNotchTrackingModifier<DIM>::UpdateCellData(AbstractCellPopulation<DIM,DIM>& rCellPopulation)
{
// Make sure the cell population is updated
rCellPopulation.Update();
// First recover each cell's Notch and Delta concentrations from the ODEs and store in CellData
for (typename AbstractCellPopulation<DIM>::Iterator cell_iter = rCellPopulation.Begin();
cell_iter != rCellPopulation.End();
++cell_iter)
{
DeltaNotchCellCycleModel* p_model = static_cast<DeltaNotchCellCycleModel*>(cell_iter->GetCellCycleModel());
double this_delta = p_model->GetDelta();
double this_notch = p_model->GetNotch();
// Note that the state variables must be in the same order as listed in DeltaNotchOdeSystem
cell_iter->GetCellData()->SetItem("notch", this_notch);
cell_iter->GetCellData()->SetItem("delta", this_delta);
}
// Next iterate over the population to compute and store each cell's neighbouring Delta concentration in CellData
for (typename AbstractCellPopulation<DIM>::Iterator cell_iter = rCellPopulation.Begin();
cell_iter != rCellPopulation.End();
++cell_iter)
{
// Get the set of neighbouring location indices
std::set<unsigned> neighbour_indices = rCellPopulation.GetNeighbouringLocationIndices(*cell_iter);
// Compute this cell's average neighbouring Delta concentration and store in CellData
if (!neighbour_indices.empty())
{
double mean_delta = 0.0;
for (std::set<unsigned>::iterator iter = neighbour_indices.begin();
iter != neighbour_indices.end();
++iter)
{
CellPtr p_cell = rCellPopulation.GetCellUsingLocationIndex(*iter);
double this_delta = p_cell->GetCellData()->GetItem("delta");
mean_delta += this_delta/neighbour_indices.size();
}
cell_iter->GetCellData()->SetItem("mean delta", mean_delta);
}
else
{
// If this cell has no neighbours, such as an isolated cell in a CaBasedCellPopulation, store 0.0 for the cell data
cell_iter->GetCellData()->SetItem("mean delta", 0.0);
}
}
}
void TCellTumorSpringForce<DIM>::AddForceContribution(AbstractCellPopulation<DIM>& rCellPopulation)
{
// Throw an exception message if not using a NodeBasedCellPopulation
if (dynamic_cast<NodeBasedCellPopulation<DIM>*>(&rCellPopulation) == NULL)
{
EXCEPTION("TCellTumorSpringForce is to be used with a NodeBasedCellPopulation only");
}
std::vector< std::pair<Node<DIM>*, Node<DIM>* > >& r_node_pairs = (static_cast<NodeBasedCellPopulation<DIM>*>(&rCellPopulation))->rGetNodePairs();
// Iterate over all pairs of nodes
for (typename std::vector< std::pair<Node<DIM>*, Node<DIM>* > >::iterator iter = r_node_pairs.begin();
iter != r_node_pairs.end();
iter++)
{
std::pair<Node<DIM>*, Node<DIM>* > pair = *iter;
Node<DIM>* p_node_a = pair.first;
Node<DIM>* p_node_b = pair.second;
// Get the node locations, radii and indices
c_vector<double, DIM> node_a_location = p_node_a->rGetLocation();
c_vector<double, DIM> node_b_location = p_node_b->rGetLocation();
double node_a_radius = p_node_a->GetRadius();
double node_b_radius = p_node_b->GetRadius();
unsigned node_a_index = p_node_a->GetIndex();
unsigned node_b_index = p_node_b->GetIndex();
// Get the cells associated with these node indices
CellPtr p_cell_a = rCellPopulation.GetCellUsingLocationIndex(node_a_index);
CellPtr p_cell_b = rCellPopulation.GetCellUsingLocationIndex(node_b_index);
/* --==-- 01: T Cell - T Cell Repulsion segment --==-- */
/* Applies RepulsionForce between Differentiated T-Cells (labelled and unlabelled) */
if ( (p_cell_a->GetMutationState()->IsType<TCellMutationState>()) && (p_cell_b->GetMutationState()->IsType<TCellMutationState>())
&& (p_cell_a->GetCellProliferativeType()->IsType<DifferentiatedCellProliferativeType>()) && (p_cell_b->GetCellProliferativeType()->IsType<DifferentiatedCellProliferativeType>()) )
{
c_vector<double, DIM> unit_difference;
unit_difference = (static_cast<NodeBasedCellPopulation<DIM>*>(&rCellPopulation))->rGetMesh().GetVectorFromAtoB(node_a_location, node_b_location);
double rest_length = node_a_radius+node_b_radius;
// Only apply force if the cells are close (repulsion force)
if (norm_2(unit_difference) < rest_length)
{
c_vector<double, DIM> force = this->CalculateForceBetweenNodes(p_node_a->GetIndex(), p_node_b->GetIndex(), rCellPopulation);
c_vector<double, DIM> negative_force = -1.0 * force;
for (unsigned j=0; j<DIM; j++)
{
assert(!std::isnan(force[j]));
}
p_node_a->AddAppliedForceContribution(force);
p_node_b->AddAppliedForceContribution(negative_force);
}
}
/* --==-- 02: T Cell - Tumor Cell Springs segment --==-- */
/* Applies GeneralisedLinearSpringForce between Labelled T-Cells and Tumor Cells */
if ( (p_cell_a->HasCellProperty<CellLabel>()) && (p_cell_b->GetMutationState()->IsType<TumorCellMutationState>())
|| (p_cell_b->HasCellProperty<CellLabel>()) && (p_cell_a->GetMutationState()->IsType<TumorCellMutationState>()) )
{
// Calculate the force between nodes
c_vector<double, DIM> force = this->CalculateForceBetweenNodes(p_node_a->GetIndex(), p_node_b->GetIndex(), rCellPopulation);
c_vector<double, DIM> negative_force = -1.0 * force;
for (unsigned j=0; j<DIM; j++)
{
assert(!std::isnan(force[j]));
}
// Add the force contribution to each node
p_node_a->AddAppliedForceContribution(force);
p_node_b->AddAppliedForceContribution(negative_force);
}
/* --==-- 03: Tumor Cell - Tumor Cell Springs segment --==-- */
/* Applies GeneralisedLinearSpringForce between Tumor Cells. Check both cells are Tumor Cells */
if ( (p_cell_a->GetMutationState()->IsType<TumorCellMutationState>()) && (p_cell_b->GetMutationState()->IsType<TumorCellMutationState>()) )
{
// Calculate the force between nodes
c_vector<double, DIM> force = this->CalculateForceBetweenNodes(p_node_a->GetIndex(), p_node_b->GetIndex(), rCellPopulation);
c_vector<double, DIM> negative_force = -1.0 * force;
for (unsigned j=0; j<DIM; j++)
{
assert(!std::isnan(force[j]));
}
// Add the force contribution to each node
p_node_a->AddAppliedForceContribution(force);
p_node_b->AddAppliedForceContribution(negative_force);
}
}
}
c_vector<double,2> CryptProjectionForce::CalculateForceBetweenNodes(unsigned nodeAGlobalIndex, unsigned nodeBGlobalIndex, AbstractCellPopulation<2>& rCellPopulation)
{
MeshBasedCellPopulation<2>* p_static_cast_cell_population = static_cast<MeshBasedCellPopulation<2>*>(&rCellPopulation);
// We should only ever calculate the force between two distinct nodes
assert(nodeAGlobalIndex != nodeBGlobalIndex);
// Get the node locations in 2D
c_vector<double,2> node_a_location_2d = rCellPopulation.GetNode(nodeAGlobalIndex)->rGetLocation();
c_vector<double,2> node_b_location_2d = rCellPopulation.GetNode(nodeBGlobalIndex)->rGetLocation();
// "Get the unit vector parallel to the line joining the two nodes" [GeneralisedLinearSpringForce]
// Create a unit vector in the direction of the 3D spring
c_vector<double,3> unit_difference = mNode3dLocationMap[nodeBGlobalIndex] - mNode3dLocationMap[nodeAGlobalIndex];
// Calculate the distance between the two nodes
double distance_between_nodes = norm_2(unit_difference);
assert(distance_between_nodes > 0);
assert(!std::isnan(distance_between_nodes));
unit_difference /= distance_between_nodes;
// If mUseCutOffLength has been set, then there is zero force between
// two nodes located a distance apart greater than mUseCutOffLength
if (this->mUseCutOffLength)
{
if (distance_between_nodes >= mMechanicsCutOffLength)
{
// Return zero (2D projected) force
return zero_vector<double>(2);
}
}
// Calculate the rest length of the spring connecting the two nodes
double rest_length = 1.0;
CellPtr p_cell_A = rCellPopulation.GetCellUsingLocationIndex(nodeAGlobalIndex);
CellPtr p_cell_B = rCellPopulation.GetCellUsingLocationIndex(nodeBGlobalIndex);
double ageA = p_cell_A->GetAge();
double ageB = p_cell_B->GetAge();
assert(!std::isnan(ageA));
assert(!std::isnan(ageB));
/*
* If the cells are both newly divided, then the rest length of the spring
* connecting them grows linearly with time, until mMeinekeSpringGrowthDuration hour after division.
*/
if (ageA < mMeinekeSpringGrowthDuration && ageB < mMeinekeSpringGrowthDuration)
{
/*
* The spring rest length increases from a predefined small parameter
* to a normal rest length of 1.0, over a period of one hour.
*/
std::pair<CellPtr,CellPtr> cell_pair = p_static_cast_cell_population->CreateCellPair(p_cell_A, p_cell_B);
if (p_static_cast_cell_population->IsMarkedSpring(cell_pair))
{
double lambda = mMeinekeDivisionRestingSpringLength;
rest_length = lambda + (1.0 - lambda) * ageA/mMeinekeSpringGrowthDuration;
}
if (ageA+SimulationTime::Instance()->GetTimeStep() >= mMeinekeSpringGrowthDuration)
{
// This spring is about to go out of scope
p_static_cast_cell_population->UnmarkSpring(cell_pair);
}
}
double a_rest_length = rest_length*0.5;
double b_rest_length = a_rest_length;
/*
* If either of the cells has begun apoptosis, then the length of the spring
* connecting them decreases linearly with time.
*/
if (p_cell_A->HasApoptosisBegun())
{
double time_until_death_a = p_cell_A->GetTimeUntilDeath();
a_rest_length = a_rest_length * time_until_death_a / p_cell_A->GetApoptosisTime();
}
if (p_cell_B->HasApoptosisBegun())
{
double time_until_death_b = p_cell_B->GetTimeUntilDeath();
b_rest_length = b_rest_length * time_until_death_b / p_cell_B->GetApoptosisTime();
}
rest_length = a_rest_length + b_rest_length;
// Assert that the rest length does not exceed 1
assert(rest_length <= 1.0+1e-12);
bool is_closer_than_rest_length = true;
if (distance_between_nodes - rest_length > 0)
{
is_closer_than_rest_length = false;
}
/*
* Although in this class the 'spring constant' is a constant parameter, in
* subclasses it can depend on properties of each of the cells.
*/
double multiplication_factor = 1.0;
multiplication_factor *= VariableSpringConstantMultiplicationFactor(nodeAGlobalIndex, nodeBGlobalIndex, rCellPopulation, is_closer_than_rest_length);
// Calculate the 3D force between the two points
c_vector<double,3> force_between_nodes = multiplication_factor * this->GetMeinekeSpringStiffness() * unit_difference * (distance_between_nodes - rest_length);
// Calculate an outward normal unit vector to the tangent plane of the crypt surface at the 3D point corresponding to node B
c_vector<double,3> outward_normal_unit_vector;
double dfdr = CalculateCryptSurfaceDerivativeAtPoint(node_b_location_2d);
double theta_B = atan2(node_b_location_2d[1], node_b_location_2d[0]); // use atan2 to determine the quadrant
double normalization_factor = sqrt(1 + dfdr*dfdr);
outward_normal_unit_vector[0] = dfdr*cos(theta_B)/normalization_factor;
outward_normal_unit_vector[1] = dfdr*sin(theta_B)/normalization_factor;
outward_normal_unit_vector[2] = -1.0/normalization_factor;
// Calculate the projection of the force onto the plane z=0
c_vector<double,2> projected_force_between_nodes_2d;
double force_dot_normal = inner_prod(force_between_nodes, outward_normal_unit_vector);
for (unsigned i=0; i<2; i++)
{
projected_force_between_nodes_2d[i] = force_between_nodes[i]
- force_dot_normal*outward_normal_unit_vector[i]
+ force_dot_normal*outward_normal_unit_vector[2];
}
return projected_force_between_nodes_2d;
}
