AbstractDiagInterface * FreeSSM::initInterface()
{
// Check if an interface is selected:
if (_iface_filename == "")
{
displayErrorMsg(tr("No interface selected !\n=> Please select a dignostic interface in the preferences."));
return NULL;
}
// Open interface:
AbstractDiagInterface *diagInterface = NULL;
if (_iface_type == AbstractDiagInterface::interface_serialPassThrough)
{
diagInterface = new SerialPassThroughDiagInterface;
}
else if (_iface_type == AbstractDiagInterface::interface_J2534)
{
diagInterface = new J2534DiagInterface;
}
else if (_iface_type == AbstractDiagInterface::interface_ATcommandControlled)
{
diagInterface = new ATcommandControlledDiagInterface;
}
else
{
displayErrorMsg(tr("Internal error:\nThe selected interface type cannot be initialized !\n=> Please report this as a bug."));
return NULL;
}
if (diagInterface->open(_iface_filename.toStdString()))
return diagInterface;
// Return error:
displayErrorMsg(tr("Couldn't open the diagnostic interface !\nMaybe the device is already in use by another application..."));
delete diagInterface;
return NULL;
}
void Preferences::interfacetest()
{
QMessageBox *msgbox;
FSSM_WaitMsgBox *waitmsgbox = NULL;
QFont msgboxfont;
// PREPARE INTERFACE:
AbstractDiagInterface *diagInterface = NULL;
if (_newinterfacetype == AbstractDiagInterface::interface_serialPassThrough)
{
diagInterface = new SerialPassThroughDiagInterface;
}
else if (_newinterfacetype == AbstractDiagInterface::interface_J2534)
{
diagInterface = new J2534DiagInterface;
}
else if (_newinterfacetype == AbstractDiagInterface::interface_ATcommandControlled)
{
diagInterface = new ATcommandControlledDiagInterface;
}
else
{
displayErrorMsg(tr("The selected interface is not supported !"));
displayErrorMsg(tr("Internal error:\nThe interface test for the selected interface is not yet implemented.\n=> Please report this as a bug."));
return;
}
// OPEN INTERFACE:
if (!diagInterface->open(_newinterfacefilename.toStdString()))
{
displayErrorMsg(tr("Couldn't open the diagnostic interface !\nPlease make sure that the device is not in use by another application."));
delete diagInterface;
return;
}
// DISPLAY INFO MESSAGE:
int choice = QMessageBox::NoButton;
msgbox = new QMessageBox( QMessageBox::Information, tr("Interface test"), tr("Please connect diagnostic interface to the vehicles\ndiagnostic connector and switch ignition on."), QMessageBox::NoButton, this);
msgbox->addButton(tr("Start"), QMessageBox::AcceptRole);
msgbox->addButton(tr("Cancel"), QMessageBox::RejectRole);
msgboxfont = msgbox->font();
msgboxfont.setPixelSize(12); // 9pts
msgbox->setFont( msgboxfont );
msgbox->show();
choice = msgbox->exec();
msgbox->close();
delete msgbox;
if (choice == QMessageBox::AcceptRole)
{
// START INTERFACE-TEST:
bool icresult = false;
bool retry = true;
choice = 0;
bool SSM1configOK = false;
bool SSM2configOK = false;
while (retry && !icresult)
{
char data = 0;
// OUTPUT WAIT MESSAGE:
waitmsgbox = new FSSM_WaitMsgBox(this, tr("Testing interface... Please wait ! "));
waitmsgbox->show();
// SSM2:
SSMP2communication *SSMP2com = new SSMP2communication(diagInterface);
SSM2configOK = diagInterface->connect(AbstractDiagInterface::protocol_SSM2_ISO14230);
if (SSM2configOK)
{
SSMP2com->setCUaddress(0x10);
unsigned int addr = 0x61;
icresult = SSMP2com->readMultipleDatabytes('\x0', &addr, 1, &data);
if (!icresult)
{
SSMP2com->setCUaddress(0x01);
icresult = SSMP2com->readMultipleDatabytes('\x0', &addr, 1, &data);
if (!icresult)
{
SSMP2com->setCUaddress(0x02);
icresult = SSMP2com->readMultipleDatabytes('\x0', &addr, 1, &data);
}
}
diagInterface->disconnect();
}
if (!icresult)
{
SSM2configOK = diagInterface->connect(AbstractDiagInterface::protocol_SSM2_ISO15765);
if (SSM2configOK)
{
SSMP2com->setCUaddress(0x7E0);
unsigned int addr = 0x61;
icresult = SSMP2com->readMultipleDatabytes('\x0', &addr, 1, &data);
diagInterface->disconnect();
}
}
delete SSMP2com;
// SSM1:
if (!icresult)
{
SSM1configOK = diagInterface->connect(AbstractDiagInterface::protocol_SSM1);
if (SSM1configOK)
{
SSMP1communication *SSMP1com = new SSMP1communication(diagInterface, SSM1_CU_Engine);
icresult = SSMP1com->readAddress(0x00, &data);
if (!icresult)
{
SSMP1com->selectCU(SSM1_CU_Transmission);
icresult = SSMP1com->readAddress(0x00, &data);
delete SSMP1com;
}
diagInterface->disconnect();
}
}
// CLOSE WAIT MESSAGE:
waitmsgbox->close();
delete waitmsgbox;
// DISPLAY TEST RESULT:
QString resultText;
if (icresult)
resultText = tr("Interface test successful !");
else
resultText = tr("Interface test failed !");
if (!SSM1configOK && !SSM2configOK) // => test must have failed
{
if (_newinterfacetype == AbstractDiagInterface::interface_serialPassThrough)
resultText += "\n\n" + tr("The selected serial port can not be configured for the SSM1- and SSM2-protocol.");
else
resultText += "\n\n" + tr("The selected interface does not support the SSM1- and SSM2-protocol.");
}
else if (!icresult)
{
resultText += "\n\n" + tr("Please make sure that the interface is connected properly and ignition is switched ON.");
}
if (!SSM1configOK || !SSM2configOK)
{
resultText += "\n\n" + tr("WARNING:");
if (!SSM1configOK)
{
if (_newinterfacetype == AbstractDiagInterface::interface_serialPassThrough)
resultText += '\n' + tr("The selected serial port can not be configured for the SSM1-protocol.");
else
resultText += '\n' + tr("The selected interface does not support the SSM1-protocol.");
}
else if (!SSM2configOK)
{
if (_newinterfacetype == AbstractDiagInterface::interface_serialPassThrough)
resultText += '\n' + tr("The selected serial port can not be configured for the SSM2-protocol.");
else
resultText += '\n' + tr("The selected interface does not support the SSM2-protocol.");
}
}
if (icresult)
msgbox = new QMessageBox(QMessageBox::Information, tr("Interface test"), resultText, QMessageBox::Ok, this);
else
{
msgbox = new QMessageBox(QMessageBox::Critical, tr("Interface test"), resultText, QMessageBox::NoButton, this);
msgbox->addButton(tr("Retry"), QMessageBox::AcceptRole);
msgbox->addButton(tr("Cancel"), QMessageBox::RejectRole);
}
msgboxfont = msgbox->font();
msgboxfont.setPixelSize(12); // 9pts
msgbox->setFont( msgboxfont );
msgbox->show();
choice = msgbox->exec();
msgbox->close();
delete msgbox;
if (!icresult && (choice != QMessageBox::AcceptRole))
retry = false;
}
}
// CLOSE INTERFACE:
if (!diagInterface->close())
displayErrorMsg(tr("Couldn't close the diagnostic interface !"));
delete diagInterface;
}