int main(int argc, char **argv)
{
float soil = 65.5;
float temp = 5.5;
// I2C change parameters to fit to your LCD
if ( !display.init(OLED_I2C_RESET,OLED_ADAFRUIT_I2C_128x64) )
exit(EXIT_FAILURE);
display.begin();
// init done
display.clearDisplay(); // clears the screen and buffer
// text display tests
display.setTextSize(1);
display.setTextColor(WHITE);
display.setCursor(0,0);
display.print(" XBee Messung\n");
display.drawLine(0, 10, display.width()-1, 10, WHITE);
display.setCursor(0,15);
display.printf("Bodenfeuchte: %4.1f %%\n", soil);
display.printf("Temperatur: %4.1f C\n\n\n", temp);
if(soil > 50) {
display.print("--> Feucht genug\n");
} else {
display.print("--> Zu Trocken! \n");
}
display.display();
// Free PI GPIO ports
display.close();
}
void aurora_cpt_oled::init()
{
oled1.begin(SSD1306_SWITCHCAPVCC, 0x3C);
oled1.clearDisplay(); // clears the screen and buffer
oled1.display();
oled1.setTextSize(1);
oled1.setTextColor(WHITE);
}
void MyDisplay::begin()
{
byte error;
Wire.lock();
#if DISPLAY_TYPE == DISPLAY_TYPE_SSD1306
Wire.beginTransmission(0x3c);
error = Wire.endTransmission();
if (error == 0)
{
displayFound = TRUE;
Debug.printf("Found OLED at %x\n", 0x3c);
// by default, we'll generate the high voltage from the 3.3v line internally! (neat!)`
// initialize with the I2C addr 0x3D (for the 128x64)
// bool:reset set to TRUE or FALSE depending on you display
display.begin(SSD1306_SWITCHCAPVCC, SSD1306_I2C_ADDRESS, FALSE);
// display.begin(SSD1306_SWITCHCAPVCC);
display.display();
}
#elif DISPLAY_TYPE == DISPLAY_TYPE_20X4
Wire.beginTransmission(I2C_LCD_ADDR);
error = Wire.endTransmission();
if (error == 0)
{
displayFound = TRUE;
Debug.printf("Found LCD at %x\n", I2C_LCD_ADDR);
lcd.begin(20, 4);
lcd.setCursor(0, 0);
lcd.print((char *)"MySensors gateway ");
}
else
{
Debug.printf("LCD not found at %x\n", I2C_LCD_ADDR);
}
#else
Debug.println("No display available");
error = 0xff;
#endif
Wire.unlock();
if (displayFound)
{
displayTimer.initializeMs(1000, TimerDelegate(&MyDisplay::update, this)).start(true);
}
}
void init()
{
Serial.begin(SERIAL_BAUD_RATE); // 115200 by default
Serial.systemDebugOutput(true); // Debug output to serial
display.begin(SSD1306_SWITCHCAPVCC);
display.clearDisplay();
dht.begin();
WifiStation.config(WIFI_SSID, WIFI_PWD);
WifiStation.enable(true);
WifiAccessPoint.enable(false);
// Run our method when station was connected to AP (or not connected)
WifiStation.waitConnection(connectOk, 20, connectFail); // We recommend 20+ seconds for connection timeout at start
}
void init()
{
Serial.begin(SERIAL_BAUD_RATE); // 115200 by default
Serial.systemDebugOutput(true); // Allow debug output to serial
// Initialize display and sensor
display.begin(SSD1306_SWITCHCAPVCC);
display.display();
// Wifi could be used eg. for display info from internet
// could be also dissabled if no needed
WifiStation.config(WIFI_SSID, WIFI_PWD);
WifiStation.enable(true);
WifiAccessPoint.enable(false);
WifiStation.waitConnection(connect_Ok, 20, connect_Fail);
// Start timer
DemoTimer.initializeMs(2000, Demo1).start();
}
int main()
{
int i, j;
int black = 1;
display.init(PIN_DC, PIN_RESET, PIN_CS, OLED_ADAFRUIT_SPI_128x32);
display.begin();
/* 左上 */
display.drawPixel(0, 0, WHITE);
display.display();
sleep(2);
/* 左下 */
display.drawPixel(0, 31, WHITE);
display.display();
sleep(2);
/* 右上 */
display.drawPixel(127, 0, WHITE);
display.display();
sleep(2);
/* 右下 */
display.drawPixel(127, 31, WHITE);
display.display();
sleep(2);
for (i = 0; i < 32; i++) {
for (j = 0; j < 128; j++) {
//display.drawPixel(j, i, (black % 2) ? BLACK : WHITE);
display.drawPixel(j, i, WHITE);
display.display();
black++;
}
//black = i;
//display.display();
}
display.clearDisplay();
display.close();
return 0;
}
void init()
{
Serial.begin(SERIAL_BAUD_RATE); // 115200 by default
Serial.systemDebugOutput(true); // Allow debug output to serial
Serial.println("Display start");
display.begin(SSD1306_SWITCHCAPVCC);
display.display();
delay(2000);
// Clear the buffer.
display.clearDisplay();
// draw a circle, 10 pixel radius
display.fillCircle(display.width()/2, display.height()/2, 10, WHITE);
display.display();
delay(2000);
display.clearDisplay();
// text display tests
display.setTextSize(1);
display.setTextColor(WHITE);
display.setCursor(0,0);
display.println("Sming Framework");
display.setTextColor(BLACK, WHITE); // 'inverted' text
display.setCursor(104, 7);
display.println("v1.0");
//----
display.setTextColor(WHITE);
display.println("Let's do smart things");
display.setTextSize(3);
display.print("IoT");
display.display();
delay(2000);
}
void test_task(void*) {
while(1){
display.begin();
//display.setContrast(50);
display.display();
delay(2000);
display.clearDisplay(); // clears the screen and buffer
// draw a single pixel
display.drawPixel(10, 10, WHITE);
display.display();
delay(2000);
display.clearDisplay();
// draw many lines
testdrawline();
display.display();
delay(2000);
display.clearDisplay();
// draw rectangles
testdrawrect();
display.display();
delay(2000);
display.clearDisplay();
// draw multiple rectangles
testfillrect();
display.display();
delay(2000);
display.clearDisplay();
// draw mulitple circles
testdrawcircle();
display.display();
delay(2000);
display.clearDisplay();
// draw a circle, 10 pixel radius
display.fillCircle(display.width()/2, display.height()/2, 10, WHITE);
display.display();
delay(2000);
display.clearDisplay();
testdrawroundrect();
delay(2000);
display.clearDisplay();
testfillroundrect();
delay(2000);
display.clearDisplay();
testdrawtriangle();
delay(2000);
display.clearDisplay();
testfilltriangle();
delay(2000);
display.clearDisplay();
// draw the first ~12 characters in the font
testdrawchar();
display.display();
delay(2000);
display.clearDisplay();
// draw scrolling text
testscrolltext();
delay(2000);
display.clearDisplay();
// text display tests
display.setTextSize(2);
display.setTextColor(WHITE);
display.setCursor(0,0);
display.println((char*)"Hello, world!");
display.setTextColor(WHITE, BLACK); // 'inverted' text
display.println((char*)"3.141592");
display.setTextSize(1);
display.setTextColor(WHITE);
display.print((char*)"0x");
display.println((char*)"DEADBEEF");
display.display();
delay(2000);
// rotation example
display.clearDisplay();
display.setRotation(1); // rotate 90 degrees counter clockwise, can also use values of 2 and 3 to go further.
display.setTextSize(1);
display.setTextColor(WHITE);
display.setCursor(0,0);
display.println((char*)"Rotation");
display.setTextSize(1);
display.println((char*)"Example!");
display.display();
delay(2000);
// revert back to no rotation
display.setRotation(0);
// miniature bitmap display
display.clearDisplay();
display.drawBitmap(30, 16, logo16_glcd_bmp, 16, 16, WHITE);
display.display();
// invert the display
display.invertDisplay(true);
delay(1000);
display.invertDisplay(false);
delay(1000);
// draw a bitmap icon and 'animate' movement
testdrawbitmap(logo16_glcd_bmp, LOGO16_GLCD_WIDTH, LOGO16_GLCD_HEIGHT);
}
}