void printErrorCb(AtCommandResponse& r, uintptr_t data) {
Print *p = (Print*)data;
if (!r.isOk()) {
p->print(F("Error sending "));
p->write(r.getCommand(), 2);
p->print(F(" command. Status: "));
p->println(r.getStatus());
}
}
void printResponseCb(AtCommandResponse& at, uintptr_t data) {
Print *p = (Print*)data;
p->println("AtCommandResponse received:");
p->print(F(" Command: "));
p->write(at.getCommand(), 2);
p->println();
printField(p, F(" Status: 0x"), at.getStatus());
if (at.getValueLength()) {
p->print(F(" Value: "));
printHex(*p, at.getValue(), at.getValueLength(), F(" "), NULL);
p->println();
}
}
void XBeeActive::search_XBee()
{
d0Value[0] = 0xFE;
commandValueLength = 0x1;
atRequest.setCommand(NTCmd);
sendAtCommand();
delay(250);
arRequestMod.clearCommandValue();
delay(100);
atRequest.setCommand(NDCmd);
int search_list = 0;
int i10;
Serial.println("\nSending command search XBee");
xbee.send(atRequest);
while (true)
{
if (xbee.readPacket(5000)) // подождите до 5 секунд для ответа состояния
{
if (xbee.getResponse().getApiId() == AT_COMMAND_RESPONSE) // Должна быть команда отклика AT
{
xbee.getResponse().getAtCommandResponse(atResponse);
if (atResponse.isOk())
{
Serial.print("Command [");
Serial.print(atResponse.getCommand()[0]);
Serial.print(atResponse.getCommand()[1]);
Serial.println("] was successful!");
if (atResponse.getValueLength() > 0)
{
Len_XBee = atResponse.getValueLength();
Serial.print("Command value length is - ");
Serial.println(atResponse.getValueLength(), DEC);
Serial.print("Command value: ");
for (i10 = 0; i10 < atResponse.getValueLength(); i10++)
{
info_XBee_data[i10] = atResponse.getValue()[i10];
Serial.print(info_XBee_data[i10], HEX);
Serial.print(" ");
}
Serial.println("");
search_list++;
}
}
else
{
Serial.print("Command return error code: ");
Serial.println(atResponse.getStatus(), HEX);
}
}
else
{
Serial.print("Expected AT response but got ");
Serial.println(xbee.getResponse().getApiId(), HEX);
}
}
else
{
if (xbee.getResponse().isError()) // at command failed
{
Serial.print("Error reading packet. Error code: ");
Serial.println(xbee.getResponse().getErrorCode());
}
else
{
Serial.println("\nNo response from radio1");
return;
}
}
}
}
void XBeeActive::sendAtCommand_ar()
{
int i10;
Serial.println("\nSending command sendAtCommand_ar to the XBee");
xbee.send(arRequestMod); // send the command
// wait up to 5 seconds for the status response
if (xbee.readPacket(5000))
{
// should be an AT command response
if (xbee.getResponse().getApiId() == AT_COMMAND_RESPONSE)
{
xbee.getResponse().getAtCommandResponse(atResponse);
if (atResponse.isOk())
{
//myGLCD.setColor(255 , 0, 0);
// Serial.print("Command [");
// Serial.print(atResponse.getCommand()[0]);
// Serial.print(atResponse.getCommand()[1]);
// Serial.println("] was successful!");
if (atResponse.getValueLength() > 0)
{
Len_XBee = atResponse.getValueLength();
// Serial.print("Command value length is ");
// Serial.println(atResponse.getValueLength(), DEC);
// Serial.print("Command value: ");
int i11 = Len_XBee - 1;
info_XBee_data1[0] = 0;
info_XBee_data1[1] = 0;
info_XBee_data1[2] = 0;
info_XBee_data1[3] = 0;
for (i10 = 0; i10 < atResponse.getValueLength(); i10++)
{
info_XBee_data[i10] = atResponse.getValue()[i10];
Serial.print(info_XBee_data[i10], HEX);
info_XBee_data1[i11] = info_XBee_data[i10];
i11--;
}
// Serial.println("");
}
}
else
{
Serial.print("Command return error code: ");
Serial.println(atResponse.getStatus(), HEX);
//myGLCD.setColor(255, 0, 0);
//myGLCD.fillRoundRect(278, 92, 318, 132);
//myGLCD.setColor(255, 255, 255);
//myGLCD.drawRoundRect(278, 92, 318, 132);
//myGLCD.setBackColor(0, 0, 0);
//delay(200);
////XBee_alarm();
//delay(1000);
//myGLCD.setColor(0, 0, 0);
//myGLCD.fillRoundRect(278, 92, 318, 132);
//myGLCD.setColor(0, 0, 0);
//myGLCD.drawRoundRect(278, 92, 318, 132);
// mcp_Out1.digitalWrite(Beep, LOW); //
delay(300);
}
}
else
{
Serial.print("Expected AT response but got ");
Serial.println(xbee.getResponse().getApiId(), HEX);
}
}
else
{
// at command failed
if (xbee.getResponse().isError())
{
Serial.print("Error reading packet. Error code: ");
Serial.println(xbee.getResponse().getErrorCode());
}
else
{
Serial.println("No response from radio2");
}
}
}
