void C3D_RENDER_OGL_LEGACY::reload( REPORTER *aStatusTextReporter )
{
m_reloadRequested = false;
ogl_free_all_display_lists();
COBJECT2D_STATS::Instance().ResetStats();
#ifdef PRINT_STATISTICS_3D_VIEWER
printf("InitSettings...\n");
#endif
unsigned stats_startReloadTime = GetRunningMicroSecs();
m_settings.InitSettings( aStatusTextReporter );
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_endReloadTime = GetRunningMicroSecs();
#endif
SFVEC3F camera_pos = m_settings.GetBoardCenter3DU();
m_settings.CameraGet().SetBoardLookAtPos( camera_pos );
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_start_OpenGL_Load_Time = GetRunningMicroSecs();
#endif
if( aStatusTextReporter )
aStatusTextReporter->Report( _( "Load OpenGL: board" ) );
// Create Board
// /////////////////////////////////////////////////////////////////////////
CCONTAINER2D boardContainer;
Convert_shape_line_polygon_to_triangles( m_settings.GetBoardPoly(),
boardContainer,
m_settings.BiuTo3Dunits(),
(const BOARD_ITEM &)*m_settings.GetBoard() );
const LIST_OBJECT2D &listBoardObject2d = boardContainer.GetList();
if( listBoardObject2d.size() > 0 )
{
// We will set a unitary Z so it will in future used with transformations
// since the board poly will be used not only to draw itself but also the
// solder mask layers.
const float layer_z_top = 1.0f;
const float layer_z_bot = 0.0f;
CLAYER_TRIANGLES *layerTriangles = new CLAYER_TRIANGLES( listBoardObject2d.size() );
// Convert the list of objects(triangles) to triangle layer structure
for( LIST_OBJECT2D::const_iterator itemOnLayer = listBoardObject2d.begin();
itemOnLayer != listBoardObject2d.end();
++itemOnLayer )
{
const COBJECT2D *object2d_A = static_cast<const COBJECT2D *>(*itemOnLayer);
wxASSERT( object2d_A->GetObjectType() == OBJ2D_TRIANGLE );
const CTRIANGLE2D *tri = (const CTRIANGLE2D *)object2d_A;
const SFVEC2F &v1 = tri->GetP1();
const SFVEC2F &v2 = tri->GetP2();
const SFVEC2F &v3 = tri->GetP3();
add_triangle_top_bot( layerTriangles,
v1,
v2,
v3,
layer_z_top,
layer_z_bot );
}
const SHAPE_POLY_SET &boardPoly = m_settings.GetBoardPoly();
wxASSERT( boardPoly.OutlineCount() > 0 );
if( boardPoly.OutlineCount() > 0 )
{
layerTriangles->AddToMiddleContourns( boardPoly,
layer_z_bot,
layer_z_top,
m_settings.BiuTo3Dunits(),
false );
m_ogl_disp_list_board = new CLAYERS_OGL_DISP_LISTS( *layerTriangles,
m_ogl_circle_texture,
layer_z_top,
layer_z_top );
}
delete layerTriangles;
}
// Create Through Holes and vias
// /////////////////////////////////////////////////////////////////////////
if( aStatusTextReporter )
aStatusTextReporter->Report( _( "Load OpenGL: holes and vias" ) );
m_ogl_disp_list_through_holes_outer = generate_holes_display_list(
m_settings.GetThroughHole_Outer().GetList(),
m_settings.GetThroughHole_Outer_poly(),
1.0f,
0.0f,
false );
SHAPE_POLY_SET bodyHoles = m_settings.GetThroughHole_Outer_poly();
bodyHoles.BooleanAdd( m_settings.GetThroughHole_Outer_poly_NPTH(),
SHAPE_POLY_SET::PM_FAST );
m_ogl_disp_list_through_holes_outer_with_npth = generate_holes_display_list(
m_settings.GetThroughHole_Outer().GetList(),
bodyHoles,
1.0f,
0.0f,
false );
m_ogl_disp_list_through_holes_inner = generate_holes_display_list(
m_settings.GetThroughHole_Inner().GetList(),
m_settings.GetThroughHole_Inner_poly(),
1.0f,
0.0f,
true );
m_ogl_disp_list_through_holes_vias_outer = generate_holes_display_list(
m_settings.GetThroughHole_Vias_Outer().GetList(),
m_settings.GetThroughHole_Vias_Outer_poly(),
1.0f,
0.0f,
false );
// Not in use
//m_ogl_disp_list_through_holes_vias_inner = generate_holes_display_list(
// m_settings.GetThroughHole_Vias_Inner().GetList(),
// m_settings.GetThroughHole_Vias_Inner_poly(),
// 1.0f, 0.0f,
// false );
const MAP_POLY & innerMapHoles = m_settings.GetPolyMapHoles_Inner();
const MAP_POLY & outerMapHoles = m_settings.GetPolyMapHoles_Outer();
wxASSERT( innerMapHoles.size() == outerMapHoles.size() );
const MAP_CONTAINER_2D &map_holes = m_settings.GetMapLayersHoles();
if( outerMapHoles.size() > 0 )
{
float layer_z_bot = 0.0f;
float layer_z_top = 0.0f;
for( MAP_POLY::const_iterator ii = outerMapHoles.begin();
ii != outerMapHoles.end();
++ii )
{
LAYER_ID layer_id = static_cast<LAYER_ID>(ii->first);
const SHAPE_POLY_SET *poly = static_cast<const SHAPE_POLY_SET *>(ii->second);
const CBVHCONTAINER2D *container = map_holes.at( layer_id );
get_layer_z_pos( layer_id, layer_z_top, layer_z_bot );
m_ogl_disp_lists_layers_holes_outer[layer_id] = generate_holes_display_list(
container->GetList(),
*poly,
layer_z_top,
layer_z_bot,
false );
}
for( MAP_POLY::const_iterator ii = innerMapHoles.begin();
ii != innerMapHoles.end();
++ii )
{
LAYER_ID layer_id = static_cast<LAYER_ID>(ii->first);
const SHAPE_POLY_SET *poly = static_cast<const SHAPE_POLY_SET *>(ii->second);
const CBVHCONTAINER2D *container = map_holes.at( layer_id );
get_layer_z_pos( layer_id, layer_z_top, layer_z_bot );
m_ogl_disp_lists_layers_holes_inner[layer_id] = generate_holes_display_list(
container->GetList(),
*poly,
layer_z_top,
layer_z_bot,
false );
}
}
// Generate vertical cylinders of vias and pads (copper)
generate_3D_Vias_and_Pads();
// Add layers maps
// /////////////////////////////////////////////////////////////////////////
if( aStatusTextReporter )
aStatusTextReporter->Report( _( "Load OpenGL: layers" ) );
for( MAP_CONTAINER_2D::const_iterator ii = m_settings.GetMapLayers().begin();
ii != m_settings.GetMapLayers().end();
++ii )
{
LAYER_ID layer_id = static_cast<LAYER_ID>(ii->first);
if( !m_settings.Is3DLayerEnabled( layer_id ) )
continue;
const CBVHCONTAINER2D *container2d = static_cast<const CBVHCONTAINER2D *>(ii->second);
const LIST_OBJECT2D &listObject2d = container2d->GetList();
if( listObject2d.size() == 0 )
continue;
float layer_z_bot = 0.0f;
float layer_z_top = 0.0f;
get_layer_z_pos( layer_id, layer_z_top, layer_z_bot );
// Calculate an estimation for the nr of triangles based on the nr of objects
unsigned int nrTrianglesEstimation = listObject2d.size() * 8;
CLAYER_TRIANGLES *layerTriangles = new CLAYER_TRIANGLES( nrTrianglesEstimation );
m_triangles[layer_id] = layerTriangles;
for( LIST_OBJECT2D::const_iterator itemOnLayer = listObject2d.begin();
itemOnLayer != listObject2d.end();
++itemOnLayer )
{
const COBJECT2D *object2d_A = static_cast<const COBJECT2D *>(*itemOnLayer);
switch( object2d_A->GetObjectType() )
{
case OBJ2D_FILLED_CIRCLE:
add_object_to_triangle_layer( (const CFILLEDCIRCLE2D *)object2d_A,
layerTriangles,
layer_z_top, layer_z_bot );
break;
case OBJ2D_POLYGON4PT:
add_object_to_triangle_layer( (const CPOLYGON4PTS2D *)object2d_A,
layerTriangles,
layer_z_top, layer_z_bot );
break;
case OBJ2D_RING:
add_object_to_triangle_layer( (const CRING2D *)object2d_A,
layerTriangles,
layer_z_top, layer_z_bot );
break;
case OBJ2D_TRIANGLE:
add_object_to_triangle_layer( (const CTRIANGLE2D *)object2d_A,
layerTriangles,
layer_z_top, layer_z_bot );
break;
case OBJ2D_ROUNDSEG:
add_object_to_triangle_layer( (const CROUNDSEGMENT2D *) object2d_A,
layerTriangles,
layer_z_top, layer_z_bot );
break;
default:
wxFAIL_MSG("C3D_RENDER_OGL_LEGACY: Object type is not implemented");
break;
}
}
const MAP_POLY &map_poly = m_settings.GetPolyMap();
if( map_poly.find( layer_id ) != map_poly.end() )
{
const SHAPE_POLY_SET *polyList = map_poly.at( layer_id );
layerTriangles->AddToMiddleContourns( *polyList,
layer_z_bot,
layer_z_top,
m_settings.BiuTo3Dunits(),
false );
}
// Create display list
// /////////////////////////////////////////////////////////////////////
m_ogl_disp_lists_layers[layer_id] = new CLAYERS_OGL_DISP_LISTS( *layerTriangles,
m_ogl_circle_texture,
layer_z_bot,
layer_z_top );
}// for each layer on map
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_end_OpenGL_Load_Time = GetRunningMicroSecs();
#endif
// Load 3D models
// /////////////////////////////////////////////////////////////////////////
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_start_models_Load_Time = GetRunningMicroSecs();
#endif
if( aStatusTextReporter )
aStatusTextReporter->Report( _( "Loading 3D models" ) );
load_3D_models();
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_end_models_Load_Time = GetRunningMicroSecs();
printf( "C3D_RENDER_OGL_LEGACY::reload times:\n" );
printf( " Reload board: %.3f ms\n",
(float)( stats_endReloadTime - stats_startReloadTime ) / 1000.0f );
printf( " Loading to openGL: %.3f ms\n",
(float)( stats_end_OpenGL_Load_Time - stats_start_OpenGL_Load_Time ) / 1000.0f );
printf( " Loading 3D models: %.3f ms\n",
(float)( stats_end_models_Load_Time - stats_start_models_Load_Time ) / 1000.0f );
COBJECT2D_STATS::Instance().PrintStats();
#endif
if( aStatusTextReporter )
{
// Calculation time in seconds
const double calculation_time = (double)( GetRunningMicroSecs() -
stats_startReloadTime) / 1e6;
aStatusTextReporter->Report( wxString::Format( _( "Reload time %.3f s" ),
calculation_time ) );
}
}
void C3D_RENDER_OGL_LEGACY::generate_3D_Vias_and_Pads()
{
if( m_settings.GetStats_Nr_Vias() )
{
const unsigned int reserve_nr_triangles_estimation =
m_settings.GetNrSegmentsCircle( m_settings.GetStats_Med_Via_Hole_Diameter3DU() ) *
8 *
m_settings.GetStats_Nr_Vias();
CLAYER_TRIANGLES *layerTriangleVIA = new CLAYER_TRIANGLES( reserve_nr_triangles_estimation );
// Insert plated vertical holes inside the board
// /////////////////////////////////////////////////////////////////////////
// Insert vias holes (vertical cylinders)
for( const TRACK* track = m_settings.GetBoard()->m_Track;
track;
track = track->Next() )
{
if( track->Type() == PCB_VIA_T )
{
const VIA *via = static_cast<const VIA*>(track);
const float holediameter = via->GetDrillValue() * m_settings.BiuTo3Dunits();
const float thickness = m_settings.GetCopperThickness3DU();
const float hole_inner_radius = ( holediameter / 2.0f );
const SFVEC2F via_center( via->GetStart().x * m_settings.BiuTo3Dunits(),
-via->GetStart().y * m_settings.BiuTo3Dunits() );
LAYER_ID top_layer, bottom_layer;
via->LayerPair( &top_layer, &bottom_layer );
float ztop, zbot, dummy;
get_layer_z_pos( top_layer, ztop, dummy );
get_layer_z_pos( bottom_layer, dummy, zbot );
wxASSERT( zbot < ztop );
generate_cylinder( via_center,
hole_inner_radius,
hole_inner_radius + thickness,
ztop,
zbot,
m_settings.GetNrSegmentsCircle( via->GetDrillValue() ),
layerTriangleVIA );
}
}
m_ogl_disp_list_via = new CLAYERS_OGL_DISP_LISTS( *layerTriangleVIA,
0,
0.0f,
0.0f );
delete layerTriangleVIA;
}
if( m_settings.GetStats_Nr_Holes() > 0 )
{
SHAPE_POLY_SET tht_outer_holes_poly; // Stores the outer poly of the copper holes (the pad)
SHAPE_POLY_SET tht_inner_holes_poly; // Stores the inner poly of the copper holes (the hole)
tht_outer_holes_poly.RemoveAllContours();
tht_inner_holes_poly.RemoveAllContours();
// Insert pads holes (vertical cylinders)
for( const MODULE* module = m_settings.GetBoard()->m_Modules;
module;
module = module->Next() )
{
for( const D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( pad->GetAttribute() != PAD_ATTRIB_HOLE_NOT_PLATED )
{
const wxSize drillsize = pad->GetDrillSize();
const bool hasHole = drillsize.x && drillsize.y;
if( !hasHole )
continue;
// we use the hole diameter to calculate the seg count.
// for round holes, drillsize.x == drillsize.y
// for oblong holes, the diameter is the smaller of
// (drillsize.x, drillsize.y)
const int diam = std::min( drillsize.x, drillsize.y ) +
m_settings.GetCopperThicknessBIU() * 2;
const int segmentsPerCircle = m_settings.GetNrSegmentsCircle( diam );
pad->BuildPadDrillShapePolygon( tht_outer_holes_poly,
m_settings.GetCopperThicknessBIU(),
segmentsPerCircle );
pad->BuildPadDrillShapePolygon( tht_inner_holes_poly,
0,
segmentsPerCircle );
}
}
}
// Subtract the holes
tht_outer_holes_poly.BooleanSubtract( tht_inner_holes_poly, SHAPE_POLY_SET::PM_FAST );
CCONTAINER2D holesContainer;
Convert_shape_line_polygon_to_triangles( tht_outer_holes_poly,
holesContainer,
m_settings.BiuTo3Dunits(),
(const BOARD_ITEM &)*m_settings.GetBoard() );
const LIST_OBJECT2D &listHolesObject2d = holesContainer.GetList();
if( listHolesObject2d.size() > 0 )
{
float layer_z_top, layer_z_bot, dummy;
get_layer_z_pos( F_Cu, layer_z_top, dummy );
get_layer_z_pos( B_Cu, dummy, layer_z_bot );
CLAYER_TRIANGLES *layerTriangles = new CLAYER_TRIANGLES( listHolesObject2d.size() );
// Convert the list of objects(triangles) to triangle layer structure
for( LIST_OBJECT2D::const_iterator itemOnLayer = listHolesObject2d.begin();
itemOnLayer != listHolesObject2d.end();
++itemOnLayer )
{
const COBJECT2D *object2d_A = static_cast<const COBJECT2D *>(*itemOnLayer);
wxASSERT( object2d_A->GetObjectType() == OBJ2D_TRIANGLE );
const CTRIANGLE2D *tri = (const CTRIANGLE2D *)object2d_A;
const SFVEC2F &v1 = tri->GetP1();
const SFVEC2F &v2 = tri->GetP2();
const SFVEC2F &v3 = tri->GetP3();
add_triangle_top_bot( layerTriangles,
v1,
v2,
v3,
layer_z_top,
layer_z_bot );
}
wxASSERT( tht_outer_holes_poly.OutlineCount() > 0 );
if( tht_outer_holes_poly.OutlineCount() > 0 )
{
layerTriangles->AddToMiddleContourns( tht_outer_holes_poly,
layer_z_bot,
layer_z_top,
m_settings.BiuTo3Dunits(),
false );
m_ogl_disp_list_pads_holes = new CLAYERS_OGL_DISP_LISTS(
*layerTriangles,
m_ogl_circle_texture, // not need
layer_z_top,
layer_z_top );
}
delete layerTriangles;
}
}
}
void C3D_RENDER_OGL_LEGACY::reload()
{
m_reloadRequested = false;
ogl_free_all_display_lists();
COBJECT2D_STATS::Instance().ResetStats();
m_settings.InitSettings();
SFVEC3F camera_pos = m_settings.GetBoardCenter3DU();
m_settings.CameraGet().SetBoardLookAtPos( camera_pos );
// Create Board
// /////////////////////////////////////////////////////////////////////////
printf("Create board...\n");
CCONTAINER2D boardContainer;
Convert_shape_line_polygon_to_triangles( m_settings.GetBoardPoly(),
boardContainer,
m_settings.BiuTo3Dunits(),
(const BOARD_ITEM &)*m_settings.GetBoard() );
const LIST_OBJECT2D listBoardObject2d = boardContainer.GetList();
if( listBoardObject2d.size() > 0 )
{
/*
float layer_z_top = m_settings.GetLayerBottomZpos3DU( F_Cu );
float layer_z_bot = m_settings.GetLayerBottomZpos3DU( B_Cu );
*/
float layer_z_top = m_settings.GetLayerBottomZpos3DU( B_Mask );
float layer_z_bot = m_settings.GetLayerTopZpos3DU( B_Mask );
CLAYER_TRIANGLES *layerTriangles = new CLAYER_TRIANGLES( listBoardObject2d.size() );
for( LIST_OBJECT2D::const_iterator itemOnLayer = listBoardObject2d.begin();
itemOnLayer != listBoardObject2d.end();
itemOnLayer++ )
{
const COBJECT2D *object2d_A = static_cast<const COBJECT2D *>(*itemOnLayer);
wxASSERT( object2d_A->GetObjectType() == OBJ2D_TRIANGLE );
const CTRIANGLE2D *tri = (const CTRIANGLE2D *)object2d_A;
const SFVEC2F &v1 = tri->GetP1();
const SFVEC2F &v2 = tri->GetP2();
const SFVEC2F &v3 = tri->GetP3();
add_triangle_top_bot( layerTriangles, v1, v2, v3, layer_z_top, layer_z_bot );
}
const SHAPE_POLY_SET boardPoly = m_settings.GetBoardPoly();
SHAPE_POLY_SET boardPolyCopy = boardPoly;
boardPolyCopy.Simplify( SHAPE_POLY_SET::PM_FAST );
if( boardPolyCopy.OutlineCount() == 1 )
{
const SHAPE_LINE_CHAIN& outlinePath = boardPolyCopy.COutline( 0 );
std::vector< SFVEC2F > contournPoints;
contournPoints.clear();
contournPoints.reserve( outlinePath.PointCount() + 2 );
for( unsigned int i = 0; i < (unsigned int)outlinePath.PointCount(); ++i )
{
const VECTOR2I& v = outlinePath.CPoint( i );
contournPoints.push_back( SFVEC2F( v.x * m_settings.BiuTo3Dunits(),
-v.y * m_settings.BiuTo3Dunits() ) );
}
contournPoints.push_back( contournPoints[0] );
if( contournPoints.size() > 4 )
{
// Calculate normals of each segment of the contourn
std::vector< SFVEC2F > contournNormals;
contournNormals.clear();
contournNormals.reserve( contournPoints.size() );
for( unsigned int i = 0; i < ( contournPoints.size() - 1 ); ++i )
{
const SFVEC2F &v0 = contournPoints[i + 0];
const SFVEC2F &v1 = contournPoints[i + 1];
SFVEC2F n = glm::normalize( v1 - v0 );
contournNormals.push_back( SFVEC2F( -n.y, n.x ) );
}
SFVEC2F lastNormal = contournNormals[contournPoints.size() - 2];
for( unsigned int i = 0; i < ( contournPoints.size() - 1 ); ++i )
{
const SFVEC2F &v0 = contournPoints[i + 0];
const SFVEC2F &v1 = contournPoints[i + 1];
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( v0.x, v0.y, NextFloatUp( layer_z_top ) ),
SFVEC3F( v1.x, v1.y, NextFloatUp( layer_z_top ) ),
SFVEC3F( v1.x, v1.y, NextFloatDown( layer_z_bot ) ),
SFVEC3F( v0.x, v0.y, NextFloatDown( layer_z_bot ) ) );
SFVEC2F n0 = contournNormals[i];
if( glm::dot( n0, lastNormal ) > 0.5f )
n0 += lastNormal;
else
n0 += contournNormals[i];
const SFVEC2F &nextNormal = contournNormals[ (i + 1) % (contournPoints.size() - 1) ];
SFVEC2F n1 = contournNormals[i];
if( glm::dot( n1, nextNormal ) > 0.5f )
n1 += nextNormal;
else
n1 += contournNormals[i];
n0 = glm::normalize( n0 );
n1 = glm::normalize( n1 );
const SFVEC3F n3d0 = SFVEC3F( n0.x, n0.y, 0.0f );
const SFVEC3F n3d1 = SFVEC3F( n1.x, n1.y, 0.0f );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( n3d0, n3d1, n3d1, n3d0 );
lastNormal = contournNormals[i];
/*
const SFVEC2F n0 = glm::normalize( v0 - center );
const SFVEC2F n1 = glm::normalize( v1 - center );
const SFVEC3F n0z = SFVEC3F( n0.x, n0.y, 0.0f );
const SFVEC3F n1z = SFVEC3F( n1.x, n1.y, 0.0f );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( n0z, n1z, n1z, n0z );*/
}
}
contournPoints.clear();
}
m_ogl_disp_list_board = new CLAYERS_OGL_DISP_LISTS( *layerTriangles, m_ogl_circle_texture, SFVEC3F(0.65f,0.55f,0.05f) );
delete layerTriangles;
}
float calc_sides_min_factor = (float)( 10.0 * IU_PER_MILS * m_settings.BiuTo3Dunits() );
float calc_sides_max_factor = (float)( 1000.0 * IU_PER_MILS * m_settings.BiuTo3Dunits() );
// Add layers maps (except B_Mask and F_Mask)
// /////////////////////////////////////////////////////////////////////////
printf("Add layers maps...\n");
for( MAP_CONTAINER_2D::const_iterator it = m_settings.GetMapLayers().begin();
it != m_settings.GetMapLayers().end(); it++ )
{
LAYER_ID layer_id = static_cast<LAYER_ID>(it->first);
if( !m_settings.Is3DLayerEnabled( layer_id ) )
continue;
const CBVHCONTAINER2D *container2d = static_cast<const CBVHCONTAINER2D *>(it->second);
const LIST_OBJECT2D listObject2d = container2d->GetList();
if( listObject2d.size() == 0 )
continue;
//CMATERIAL *materialLayer = &m_materials.m_SilkS;
SFVEC3F layerColor = SFVEC3F( 0.3f, 0.4f, 0.5f );
float layer_z_bot = m_settings.GetLayerBottomZpos3DU( layer_id );
float layer_z_top = m_settings.GetLayerTopZpos3DU( layer_id );
if( layer_z_top < layer_z_bot )
{
float tmpFloat = layer_z_bot;
layer_z_bot = layer_z_top;
layer_z_top = tmpFloat;
}
layer_z_bot -= m_settings.GetNonCopperLayerThickness3DU();
layer_z_top += m_settings.GetNonCopperLayerThickness3DU();
if( m_settings.GetFlag( FL_USE_REALISTIC_MODE ) )
{
switch( layer_id )
{
case B_Adhes:
case F_Adhes:
break;
case B_Paste:
case F_Paste:
// materialLayer = &m_materials.m_Paste;
break;
case B_SilkS:
case F_SilkS:
// materialLayer = &m_materials.m_SilkS;
// layerColor = g_silkscreenColor;
break;
case Dwgs_User:
case Cmts_User:
case Eco1_User:
case Eco2_User:
case Edge_Cuts:
case Margin:
break;
case B_CrtYd:
case F_CrtYd:
break;
case B_Fab:
case F_Fab:
break;
default:
//materialLayer = &m_materials.m_Copper;
//layerColor = g_copperColor;
break;
}
}
else
{
layerColor = m_settings.GetLayerColor( layer_id );
}
// Calculate an estiation for then nr of triangles based on the nr of objects
unsigned int nrTrianglesEstimation = listObject2d.size() * 8;
CLAYER_TRIANGLES *layerTriangles = new CLAYER_TRIANGLES( nrTrianglesEstimation );
m_triangles[layer_id] = layerTriangles;
for( LIST_OBJECT2D::const_iterator itemOnLayer = listObject2d.begin();
itemOnLayer != listObject2d.end(); itemOnLayer++ )
{
const COBJECT2D *object2d_A = static_cast<const COBJECT2D *>(*itemOnLayer);
switch( object2d_A->GetObjectType() )
{
case OBJ2D_FILLED_CIRCLE:
{
const CFILLEDCIRCLE2D *filledCircle = (const CFILLEDCIRCLE2D *)object2d_A;
const SFVEC2F ¢er = filledCircle->GetCenter();
float radius = filledCircle->GetRadius() * 2.0f; // Double because the render triangle
float radiusSquared = radius * radius;
const float f = (sqrtf(2.0f) / 2.0f) * radius * 0.9;// * texture_factor;
layerTriangles->m_layer_top_segment_ends->AddTriangle( SFVEC3F( center.x + f, center.y, layer_z_top ),
SFVEC3F( center.x - f, center.y, layer_z_top ),
SFVEC3F( center.x,
center.y - f, layer_z_top ) );
layerTriangles->m_layer_top_segment_ends->AddTriangle( SFVEC3F( center.x - f, center.y, layer_z_top ),
SFVEC3F( center.x + f, center.y, layer_z_top ),
SFVEC3F( center.x,
center.y + f, layer_z_top ) );
layerTriangles->m_layer_bot_segment_ends->AddTriangle( SFVEC3F( center.x - f, center.y, layer_z_bot ),
SFVEC3F( center.x + f, center.y, layer_z_bot ),
SFVEC3F( center.x,
center.y - f, layer_z_bot ) );
layerTriangles->m_layer_bot_segment_ends->AddTriangle( SFVEC3F( center.x + f, center.y, layer_z_bot ),
SFVEC3F( center.x - f, center.y, layer_z_bot ),
SFVEC3F( center.x,
center.y + f, layer_z_bot ) );
unsigned int nr_sides_per_circle = (unsigned int)mapf( radiusSquared,
calc_sides_min_factor, calc_sides_max_factor,
24.0f, 256.0f );
wxASSERT( nr_sides_per_circle >= 24 );
// Normal radius for the circle
radius = filledCircle->GetRadius();
std::vector< SFVEC2F > contournPoints;
contournPoints.clear();
contournPoints.reserve( nr_sides_per_circle + 2 );
int delta = 3600 / nr_sides_per_circle;
for( int ii = 0; ii < 3600; ii += delta )
{
const SFVEC2F rotatedDir = glm::rotate( SFVEC2F( 0.0f, 1.0f ), (float)ii * 2.0f * 3.14f / 3600.0f );
contournPoints.push_back( SFVEC2F( center.x - rotatedDir.y * radius, center.y + rotatedDir.x * radius ) );
}
contournPoints.push_back( contournPoints[0] );
if( contournPoints.size() > 1 )
{
for( unsigned int i = 0; i < ( contournPoints.size() - 1 ); ++i )
{
const SFVEC2F &v0 = contournPoints[i + 0];
const SFVEC2F &v1 = contournPoints[i + 1];
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( v0.x, v0.y, NextFloatUp( layer_z_bot ) ),
SFVEC3F( v1.x, v1.y, NextFloatUp( layer_z_bot ) ),
SFVEC3F( v1.x, v1.y, NextFloatDown( layer_z_top ) ),
SFVEC3F( v0.x, v0.y, NextFloatDown( layer_z_top ) ) );
const SFVEC2F n0 = glm::normalize( v0 - center );
const SFVEC2F n1 = glm::normalize( v1 - center );
const SFVEC3F n0z = SFVEC3F( n0.x, n0.y, 0.0f );
const SFVEC3F n1z = SFVEC3F( n1.x, n1.y, 0.0f );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( n0z, n1z, n1z, n0z );
}
}
contournPoints.clear();
}
break;
case OBJ2D_DUMMYBLOCK:
{
}
break;
case OBJ2D_POLYGON4PT:
{
const CPOLYGON4PTS2D *poly = (const CPOLYGON4PTS2D *)object2d_A;
const SFVEC2F &v0 = poly->GetV0();
const SFVEC2F &v1 = poly->GetV1();
const SFVEC2F &v2 = poly->GetV2();
const SFVEC2F &v3 = poly->GetV3();
add_triangle_top_bot( layerTriangles, v0, v2, v1, layer_z_top, layer_z_bot );
add_triangle_top_bot( layerTriangles, v2, v0, v3, layer_z_top, layer_z_bot );
const SFVEC2F &n0 = poly->GetN0();
const SFVEC2F &n1 = poly->GetN1();
const SFVEC2F &n2 = poly->GetN2();
const SFVEC2F &n3 = poly->GetN3();
const SFVEC3F n3d0 = SFVEC3F(-n0.y, n0.x, 0.0f );
const SFVEC3F n3d1 = SFVEC3F(-n1.y, n1.x, 0.0f );
const SFVEC3F n3d2 = SFVEC3F(-n2.y, n2.x, 0.0f );
const SFVEC3F n3d3 = SFVEC3F(-n3.y, n3.x, 0.0f );
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( v0.x, v0.y, layer_z_bot ),
SFVEC3F( v1.x, v1.y, layer_z_bot ),
SFVEC3F( v1.x, v1.y, layer_z_top ),
SFVEC3F( v0.x, v0.y, layer_z_top ) );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( n3d0, n3d0, n3d0, n3d0 );
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( v2.x, v2.y, layer_z_top ),
SFVEC3F( v1.x, v1.y, layer_z_top ),
SFVEC3F( v1.x, v1.y, layer_z_bot ),
SFVEC3F( v2.x, v2.y, layer_z_bot ) );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( n3d1, n3d1, n3d1, n3d1 );
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( v3.x, v3.y, layer_z_top ),
SFVEC3F( v2.x, v2.y, layer_z_top ),
SFVEC3F( v2.x, v2.y, layer_z_bot ),
SFVEC3F( v3.x, v3.y, layer_z_bot ) );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( n3d2, n3d2, n3d2, n3d2 );
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( v0.x, v0.y, layer_z_top ),
SFVEC3F( v3.x, v3.y, layer_z_top ),
SFVEC3F( v3.x, v3.y, layer_z_bot ),
SFVEC3F( v0.x, v0.y, layer_z_bot ) );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( n3d3, n3d3, n3d3, n3d3 );
}
break;
case OBJ2D_RING:
{
const CRING2D *ring = (const CRING2D *)object2d_A;
const SFVEC2F ¢er = ring->GetCenter();
float inner = ring->GetInnerRadius();
float outer = ring->GetOuterRadius();
unsigned int nr_sides_per_circle = (unsigned int)mapf( outer,
calc_sides_min_factor, calc_sides_max_factor,
24.0f, 256.0f );
wxASSERT( nr_sides_per_circle >= 24 );
std::vector< SFVEC2F > innerContour;
std::vector< SFVEC2F > outerContour;
innerContour.clear();
innerContour.reserve( nr_sides_per_circle + 2 );
outerContour.clear();
outerContour.reserve( nr_sides_per_circle + 2 );
int delta = 3600 / nr_sides_per_circle;
for( int ii = 0; ii < 3600; ii += delta )
{
const SFVEC2F rotatedDir = glm::rotate( SFVEC2F( 0.0f, 1.0f), (float) ii * 2.0f * 3.14f / 3600.0f );
innerContour.push_back( SFVEC2F( center.x - rotatedDir.y * inner, center.y + rotatedDir.x * inner ) );
outerContour.push_back( SFVEC2F( center.x - rotatedDir.y * outer, center.y + rotatedDir.x * outer ) );
}
innerContour.push_back( innerContour[0] );
outerContour.push_back( outerContour[0] );
wxASSERT( innerContour.size() == outerContour.size() );
for( unsigned int i = 0; i < ( innerContour.size() - 1 ); ++i )
{
const SFVEC2F &vi0 = innerContour[i + 0];
const SFVEC2F &vi1 = innerContour[i + 1];
const SFVEC2F &vo0 = outerContour[i + 0];
const SFVEC2F &vo1 = outerContour[i + 1];
layerTriangles->m_layer_top_triangles->AddQuad( SFVEC3F( vi1.x, vi1.y, layer_z_top ),
SFVEC3F( vi0.x, vi0.y, layer_z_top ),
SFVEC3F( vo0.x, vo0.y, layer_z_top ),
SFVEC3F( vo1.x, vo1.y, layer_z_top ) );
layerTriangles->m_layer_bot_triangles->AddQuad( SFVEC3F( vi1.x, vi1.y, layer_z_bot ),
SFVEC3F( vo1.x, vo1.y, layer_z_bot ),
SFVEC3F( vo0.x, vo0.y, layer_z_bot ),
SFVEC3F( vi0.x, vi0.y, layer_z_bot ) );
}
for( unsigned int i = 0; i < ( innerContour.size() - 1 ); ++i )
{
const SFVEC2F &v0 = innerContour[i + 0];
const SFVEC2F &v1 = innerContour[i + 1];
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( v1.x, v1.y, NextFloatUp( layer_z_bot ) ),
SFVEC3F( v0.x, v0.y, NextFloatUp( layer_z_bot ) ),
SFVEC3F( v0.x, v0.y, NextFloatDown( layer_z_top ) ),
SFVEC3F( v1.x, v1.y, NextFloatDown( layer_z_top ) ) );
const SFVEC2F n0 = glm::normalize( v0 - center );
const SFVEC2F n1 = glm::normalize( v1 - center );
const SFVEC3F n0z = SFVEC3F( n0.x, n0.y, 0.0f );
const SFVEC3F n1z = SFVEC3F( n1.x, n1.y, 0.0f );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( n0z, n1z, n1z, n0z );
}
for( unsigned int i = 0; i < ( outerContour.size() - 1 ); ++i )
{
const SFVEC2F &v0 = outerContour[i + 0];
const SFVEC2F &v1 = outerContour[i + 1];
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( v0.x, v0.y, NextFloatUp( layer_z_bot ) ),
SFVEC3F( v1.x, v1.y, NextFloatUp( layer_z_bot ) ),
SFVEC3F( v1.x, v1.y, NextFloatDown( layer_z_top ) ),
SFVEC3F( v0.x, v0.y, NextFloatDown( layer_z_top ) ) );
const SFVEC2F n0 = glm::normalize( v0 - center );
const SFVEC2F n1 = glm::normalize( v1 - center );
const SFVEC3F n0z = SFVEC3F( n0.x, n0.y, 0.0f );
const SFVEC3F n1z = SFVEC3F( n1.x, n1.y, 0.0f );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( n0z, n1z, n1z, n0z );
}
}
break;
case OBJ2D_TRIANGLE:
{
const CTRIANGLE2D *tri = (const CTRIANGLE2D *)object2d_A;
const SFVEC2F &v1 = tri->GetP1();
const SFVEC2F &v2 = tri->GetP2();
const SFVEC2F &v3 = tri->GetP3();
add_triangle_top_bot( layerTriangles, v1, v2, v3, layer_z_top, layer_z_bot );
}
break;
case OBJ2D_ROUNDSEG:
{
const CROUNDSEGMENT2D &roundSeg = (const CROUNDSEGMENT2D &) *object2d_A;
unsigned int nr_sides_per_circle = (unsigned int)mapf( roundSeg.GetWidth(),
calc_sides_min_factor, calc_sides_max_factor,
24.0f, 256.0f );
wxASSERT( nr_sides_per_circle >= 24 );
SFVEC2F leftStart = roundSeg.GetLeftStar();
SFVEC2F leftEnd = roundSeg.GetLeftEnd();
SFVEC2F leftDir = roundSeg.GetLeftDir();
SFVEC2F rightStart = roundSeg.GetRightStar();
SFVEC2F rightEnd = roundSeg.GetRightEnd();
SFVEC2F rightDir = roundSeg.GetRightDir();
float radius = roundSeg.GetRadius();
SFVEC2F start = roundSeg.GetStart();
SFVEC2F end = roundSeg.GetEnd();
float texture_factor = (12.0f/(float)SIZE_OF_CIRCLE_TEXTURE) + 1.0f;
float texture_factorF= ( 4.0f/(float)SIZE_OF_CIRCLE_TEXTURE) + 1.0f;
const float radius_of_the_square = sqrtf( roundSeg.GetRadiusSquared() * 2.0f );
const float radius_triangle_factor = (radius_of_the_square - radius) / radius;
const SFVEC2F factorS = SFVEC2F( -rightDir.y * radius * radius_triangle_factor, rightDir.x * radius * radius_triangle_factor );
const SFVEC2F factorE = SFVEC2F( -leftDir.y * radius * radius_triangle_factor, leftDir.x * radius * radius_triangle_factor );
// Top end segment triangles
layerTriangles->m_layer_top_segment_ends->AddTriangle( SFVEC3F( rightEnd.x + texture_factor * factorS.x, rightEnd.y + texture_factor * factorS.y, layer_z_top ),
SFVEC3F( leftStart.x + texture_factor * factorE.x, leftStart.y + texture_factor * factorE.y, layer_z_top ),
SFVEC3F( start.x - texture_factorF * leftDir.x * radius * sqrtf(2.0f),
start.y - texture_factorF * leftDir.y * radius * sqrtf(2.0f), layer_z_top ) );
layerTriangles->m_layer_top_segment_ends->AddTriangle( SFVEC3F( leftEnd.x + texture_factor * factorE.x, leftEnd.y + texture_factor * factorE.y, layer_z_top ),
SFVEC3F( rightStart.x + texture_factor * factorS.x, rightStart.y + texture_factor * factorS.y, layer_z_top ),
SFVEC3F( end.x - texture_factorF * rightDir.x * radius * sqrtf(2.0f),
end.y - texture_factorF * rightDir.y * radius * sqrtf(2.0f), layer_z_top ) );
// Bot end segment triangles
layerTriangles->m_layer_bot_segment_ends->AddTriangle( SFVEC3F( leftStart.x + texture_factor * factorE.x, leftStart.y + texture_factor * factorE.y, layer_z_bot ),
SFVEC3F( rightEnd.x + texture_factor * factorS.x, rightEnd.y + texture_factor * factorS.y, layer_z_bot ),
SFVEC3F( start.x - texture_factorF * leftDir.x * radius * sqrtf(2.0f),
start.y - texture_factorF * leftDir.y * radius * sqrtf(2.0f), layer_z_bot ) );
layerTriangles->m_layer_bot_segment_ends->AddTriangle( SFVEC3F( rightStart.x + texture_factor * factorS.x, rightStart.y + texture_factor * factorS.y, layer_z_bot ),
SFVEC3F( leftEnd.x + texture_factor * factorE.x, leftEnd.y + texture_factor * factorE.y, layer_z_bot ),
SFVEC3F( end.x - texture_factorF * rightDir.x * radius * sqrtf(2.0f),
end.y - texture_factorF * rightDir.y * radius * sqrtf(2.0f), layer_z_bot ) );
// Segment top and bot planes
layerTriangles->m_layer_top_triangles->AddQuad( SFVEC3F( rightEnd.x, rightEnd.y, layer_z_top ),
SFVEC3F( rightStart.x, rightStart.y, layer_z_top ),
SFVEC3F( leftEnd.x, leftEnd.y, layer_z_top ),
SFVEC3F( leftStart.x, leftStart.y, layer_z_top ) );
layerTriangles->m_layer_bot_triangles->AddQuad( SFVEC3F( rightEnd.x, rightEnd.y, layer_z_bot ),
SFVEC3F( leftStart.x, leftStart.y, layer_z_bot ),
SFVEC3F( leftEnd.x, leftEnd.y, layer_z_bot ),
SFVEC3F( rightStart.x, rightStart.y, layer_z_bot ) );
// Middle contourns (two sides of the segment)
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( leftStart.x, leftStart.y, layer_z_top ),
SFVEC3F( leftEnd.x, leftEnd.y, layer_z_top ),
SFVEC3F( leftEnd.x, leftEnd.y, layer_z_bot ),
SFVEC3F( leftStart.x, leftStart.y, layer_z_bot ) );
const SFVEC3F leftNormal = SFVEC3F( -leftDir.y, leftDir.x, 0.0f );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( leftNormal, leftNormal, leftNormal, leftNormal );
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( rightStart.x, rightStart.y, layer_z_top ),
SFVEC3F( rightEnd.x, rightEnd.y, layer_z_top ),
SFVEC3F( rightEnd.x, rightEnd.y, layer_z_bot ),
SFVEC3F( rightStart.x, rightStart.y, layer_z_bot ) );
const SFVEC3F rightNormal = SFVEC3F( -rightDir.y, rightDir.x, 0.0f );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( rightNormal, rightNormal, rightNormal, rightNormal );
// Compute the outlines of the segment, and creates a polygon
// add right rounded end:
std::vector< SFVEC2F > roundedEndPointsStart;
std::vector< SFVEC2F > roundedEndPointsEnd;
roundedEndPointsStart.clear();
roundedEndPointsStart.reserve( nr_sides_per_circle + 2 );
roundedEndPointsEnd.clear();
roundedEndPointsEnd.reserve( nr_sides_per_circle + 2 );
roundedEndPointsStart.push_back( SFVEC2F( leftStart.x, leftStart.y ) );
roundedEndPointsEnd.push_back( SFVEC2F( leftEnd.x, leftEnd.y ) );
int delta = 3600 / nr_sides_per_circle;
for( int ii = delta; ii < 1800; ii += delta )
{
const SFVEC2F rotatedDirL = glm::rotate( leftDir, (float) ii * 2.0f * 3.14f / 3600.0f );
const SFVEC2F rotatedDirR = glm::rotate( rightDir, (float)(1800 - ii) * 2.0f * 3.14f / 3600.0f );
roundedEndPointsStart.push_back( SFVEC2F( start.x - rotatedDirL.y * radius, start.y + rotatedDirL.x * radius ) );
roundedEndPointsEnd.push_back( SFVEC2F( end.x - rotatedDirR.y * radius, end.y + rotatedDirR.x * radius ) );
}
roundedEndPointsStart.push_back( SFVEC2F( rightEnd.x, rightEnd.y ) );
roundedEndPointsEnd.push_back( SFVEC2F( rightStart.x, rightStart.y ) );
if( roundedEndPointsStart.size() > 1 )
{
for( unsigned int i = 0; i < ( roundedEndPointsStart.size() - 1 ); ++i )
{
const SFVEC2F &v0 = roundedEndPointsStart[i + 0];
const SFVEC2F &v1 = roundedEndPointsStart[i + 1];
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( v0.x, v0.y, layer_z_bot ),
SFVEC3F( v1.x, v1.y, layer_z_bot ),
SFVEC3F( v1.x, v1.y, layer_z_top ),
SFVEC3F( v0.x, v0.y, layer_z_top ) );
const SFVEC2F n0 = glm::normalize( v0 - start );
const SFVEC2F n1 = glm::normalize( v1 - start );
const SFVEC3F n0z = SFVEC3F( n0.x, n0.y, 0.0f );
const SFVEC3F n1z = SFVEC3F( n1.x, n1.y, 0.0f );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( n0z, n1z, n1z, n0z );
}
}
roundedEndPointsStart.clear();
if( roundedEndPointsEnd.size() > 1 )
{
for( unsigned int i = 0; i < ( roundedEndPointsEnd.size() - 1 ); ++i )
{
const SFVEC2F &v0 = roundedEndPointsEnd[i + 0];
const SFVEC2F &v1 = roundedEndPointsEnd[i + 1];
layerTriangles->m_layer_middle_contourns_quads->AddQuad( SFVEC3F( v0.x, v0.y, layer_z_top ),
SFVEC3F( v1.x, v1.y, layer_z_top ),
SFVEC3F( v1.x, v1.y, layer_z_bot ),
SFVEC3F( v0.x, v0.y, layer_z_bot ) );
const SFVEC2F n0 = glm::normalize( v0 - end );
const SFVEC2F n1 = glm::normalize( v1 - end );
const SFVEC3F n0z = SFVEC3F( n0.x, n0.y, 0.0f );
const SFVEC3F n1z = SFVEC3F( n1.x, n1.y, 0.0f );
layerTriangles->m_layer_middle_contourns_quads->AddNormal( n0z, n1z, n1z, n0z );
}
}
roundedEndPointsEnd.clear();
}
break;
default:
{
}
break;
}
#if 0
// not yet used / implemented (can be used in future to clip the objects in the board borders
COBJECT2D *object2d_C = CSGITEM_FULL;
std::vector<const COBJECT2D *> *object2d_B = CSGITEM_EMPTY;
if( m_settings.GetFlag( FL_RENDER_SHOW_HOLES_IN_ZONES ) )
{
object2d_B = new std::vector<const COBJECT2D *>();
// Check if there are any layerhole that intersects this object
// Eg: a segment is cutted by a via hole or THT hole.
// /////////////////////////////////////////////////////////////
const MAP_CONTAINER_2D &layerHolesMap = m_settings.GetMapLayersHoles();
if( layerHolesMap.find(layer_id) != layerHolesMap.end() )
{
MAP_CONTAINER_2D::const_iterator ii_hole = layerHolesMap.find(layer_id);
const CBVHCONTAINER2D *containerLayerHoles2d = static_cast<const CBVHCONTAINER2D *>(ii_hole->second);
CONST_LIST_OBJECT2D intersectionList;
containerLayerHoles2d->GetListObjectsIntersects( object2d_A->GetBBox(), intersectionList );
if( !intersectionList.empty() )
{
for( CONST_LIST_OBJECT2D::const_iterator holeOnLayer = intersectionList.begin();
holeOnLayer != intersectionList.end();
holeOnLayer++ )
{
const COBJECT2D *hole2d = static_cast<const COBJECT2D *>(*holeOnLayer);
//if( object2d_A->Intersects( hole2d->GetBBox() ) )
//if( object2d_A->GetBBox().Intersects( hole2d->GetBBox() ) )
object2d_B->push_back( hole2d );
}
}
}
// Check if there are any THT that intersects this object
// /////////////////////////////////////////////////////////////
if( !m_settings.GetThroughHole_Inflated().GetList().empty() )
{
CONST_LIST_OBJECT2D intersectionList;
m_settings.GetThroughHole_Inflated().GetListObjectsIntersects( object2d_A->GetBBox(), intersectionList );
if( !intersectionList.empty() )
{
for( CONST_LIST_OBJECT2D::const_iterator hole = intersectionList.begin();
hole != intersectionList.end();
hole++ )
{
const COBJECT2D *hole2d = static_cast<const COBJECT2D *>(*hole);
//if( object2d_A->Intersects( hole2d->GetBBox() ) )
//if( object2d_A->GetBBox().Intersects( hole2d->GetBBox() ) )
object2d_B->push_back( hole2d );
}
}
}
if( object2d_B->empty() )
{
delete object2d_B;
object2d_B = CSGITEM_EMPTY;
}
}
if( (object2d_B == CSGITEM_EMPTY) &&
(object2d_C == CSGITEM_FULL) )
{
#if 0
create_3d_object_from( m_object_container, object2d_A, m_settings.GetLayerBottomZpos3DU( layer_id ),
m_settings.GetLayerTopZpos3DU( layer_id ),
materialLayer,
layerColor );
#else
CLAYERITEM *objPtr = new CLAYERITEM( object2d_A, m_settings.GetLayerBottomZpos3DU( layer_id ),
m_settings.GetLayerTopZpos3DU( layer_id ) );
objPtr->SetMaterial( materialLayer );
objPtr->SetColor( layerColor );
m_object_container.Add( objPtr );
#endif
}
else
{
#if 1
CITEMLAYERCSG2D *itemCSG2d = new CITEMLAYERCSG2D( object2d_A, object2d_B, object2d_C,
object2d_A->GetBoardItem() );
m_containerWithObjectsToDelete.Add( itemCSG2d );
CLAYERITEM *objPtr = new CLAYERITEM( itemCSG2d, m_settings.GetLayerBottomZpos3DU( layer_id ),
m_settings.GetLayerTopZpos3DU( layer_id ) );
objPtr->SetMaterial( materialLayer );
objPtr->SetColor( layerColor );
m_object_container.Add( objPtr );
#endif
}
#endif
}
// Create display list
// /////////////////////////////////////////////////////////////////////
m_ogl_disp_lists_layers[layer_id] = new CLAYERS_OGL_DISP_LISTS( *layerTriangles,
m_ogl_circle_texture,
layerColor );
}// for each layer on map
}