ConfigurationKeyMap getConfigurationKeys()
{
ConfigurationKeyMap map;
ConfigurationKey *tmp;
tmp = new ConfigurationKey("TRX.RadioFrequencyOffset","128",
"~170Hz steps",
ConfigurationKey::FACTORY,
ConfigurationKey::VALRANGE,
"96:160",// educated guess
true,
"Fine-tuning adjustment for the transceiver master clock. "
"Roughly 170 Hz/step. "
"Set at the factory. "
"Do not adjust without proper calibration."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("TRX.TxAttenOffset","0",
"dB of attenuation",
ConfigurationKey::FACTORY,
ConfigurationKey::VALRANGE,
"0:100",// educated guess
true,
"Hardware-specific gain adjustment for transmitter, matched to the power amplifier, expessed as an attenuationi in dB. "
"Set at the factory. "
"Do not adjust without proper calibration."
);
map[tmp->getName()] = *tmp;
delete tmp;
return map;
}
ConfigurationKeyMap getConfigurationKeys2()
{
extern ConfigurationKeyMap getConfigurationKeys();
ConfigurationKeyMap map = getConfigurationKeys();
ConfigurationKey *tmp;
tmp = new ConfigurationKey("TRX.RadioFrequencyOffset","128",
"~170Hz steps",
ConfigurationKey::FACTORY,
ConfigurationKey::VALRANGE,
"96:160",// educated guess
true,
"Fine-tuning adjustment for the transceiver master clock. "
"Roughly 170 Hz/step. "
"Set at the factory. "
"Do not adjust without proper calibration."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("TRX.TxAttenOffset","0",
"dB of attenuation",
ConfigurationKey::FACTORY,
ConfigurationKey::VALRANGE,
"0:100",// educated guess
true,
"Hardware-specific gain adjustment for transmitter, matched to the power amplifier, expessed as an attenuationi in dB. "
"Set at the factory. "
"Do not adjust without proper calibration."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("TRX.RadioNumber","0",
"",
ConfigurationKey::FACTORY,
ConfigurationKey::VALRANGE,
"0:9", // Not likely to have 10 radios on the same computer. Not likely to have >1
true,
"If non-0, use multiple radios on the same cpu, numbered 1-9. Must change TRX.Port also. Provide a separate config file for each OpenBTS+Radio combination using the environment variable or --config command line option."
);
map[tmp->getName()] = *tmp;
delete(tmp);
return map;
}
ConfigurationKeyMap getConfigurationKeys()
{
ConfigurationKeyMap map;
ConfigurationKey *tmp;
tmp = new ConfigurationKey("SubscriberRegistry.A3A8","/OpenBTS/comp128",
"",
ConfigurationKey::CUSTOMERWARN,
ConfigurationKey::FILEPATH,
"",
false,
"Path to the program that implements the A3/A8 algorithm."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("SubscriberRegistry.db","/var/lib/asterisk/sqlite3dir/sqlite3.db",
"",
ConfigurationKey::CUSTOMERWARN,
ConfigurationKey::FILEPATH,
"",
false,
"The location of the sqlite3 database holding the subscriber registry."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("SubscriberRegistry.Port","5064",
"",
ConfigurationKey::CUSTOMERWARN,
ConfigurationKey::PORT,
"",
false,
"Port used by the SIP Authentication Server."
);
map[tmp->getName()] = *tmp;
delete tmp;
return map;
}
ConfigurationKeyMap getConfigurationKeys()
{
ConfigurationKeyMap map;
ConfigurationKey *tmp;
tmp = new ConfigurationKey("booltest","0",
"",
ConfigurationKey::DEVELOPER,
ConfigurationKey::BOOLEAN,
"",
false,
""
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("numnumber","42",
"",
ConfigurationKey::DEVELOPER,
ConfigurationKey::VALRANGE,
"0-100",
false,
""
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("newstring","new string value",
"",
ConfigurationKey::DEVELOPER,
ConfigurationKey::STRING,
"",
false,
""
);
map[tmp->getName()] = *tmp;
delete tmp;
return map;
}
ConfigurationKeyMap getConfigurationKeys()
{
ConfigurationKeyMap map;
ConfigurationKey *tmp;
tmp = new ConfigurationKey("TRX.RadioFrequencyOffset","128",
"~170Hz steps",
ConfigurationKey::FACTORY,
ConfigurationKey::VALRANGE,
"96:160",// educated guess
true,
"Fine-tuning adjustment for the transceiver master clock. "
"Roughly 170 Hz/step. "
"Set at the factory. "
"Do not adjust without proper calibration."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("TRX.TxAttenOffset","0",
"dB of attenuation",
ConfigurationKey::FACTORY,
ConfigurationKey::VALRANGE,
"0:100",// educated guess
true,
"Hardware-specific gain adjustment for transmitter, matched to the power amplifier, expessed as an attenuationi in dB. "
"Set at the factory. "
"Do not adjust without proper calibration."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("TRX.MinOversampling","1",
"",
ConfigurationKey::CUSTOMERWARN,
ConfigurationKey::VALRANGE,
"1:20",// educated guess
true,
"Minimum signal oversampling unless overriden by device or ARFCNs. "
"This parameter increases computational requirements of the transceiver."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("TRX.IP","127.0.0.1",
"",
ConfigurationKey::CUSTOMERWARN,
ConfigurationKey::IPADDRESS,
"",
true,
"IP address of the transceiver application."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("TRX.Port","5700",
"",
ConfigurationKey::FACTORY,
ConfigurationKey::PORT,
"",
true,
"IP port of the transceiver application."
);
map[tmp->getName()] = *tmp;
delete tmp;
return map;
}
ConfigurationKeyMap getConfigurationKeys()
{
ConfigurationKeyMap map;
ConfigurationKey *tmp;
tmp = new ConfigurationKey("SIP.Proxy.Registration","127.0.0.1:5064",
"",
ConfigurationKey::CUSTOMERWARN,
ConfigurationKey::IPANDPORT,
"",
false,
"The IP host and port of the proxy to be used for registration and authentication. "
"This should normally be the subscriber registry SIP interface, not Asterisk."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("SubscriberRegistry.A3A8","/OpenBTS/comp128",
"",
ConfigurationKey::CUSTOMERWARN,
ConfigurationKey::FILEPATH,
"",
false,
"Path to the program that implements the A3/A8 algorithm."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("SubscriberRegistry.db","/var/lib/asterisk/sqlite3dir/sqlite3.db",
"",
ConfigurationKey::CUSTOMERWARN,
ConfigurationKey::FILEPATH,
"",
false,
"The location of the sqlite3 database holding the subscriber registry."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("SubscriberRegistry.Manager.Title","Subscriber Registry",
"",
ConfigurationKey::CUSTOMER,
ConfigurationKey::STRING,
"^[[:print:]]+$",
false,
"Title text to be displayed on the subscriber registry manager."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("SubscriberRegistry.Manager.VisibleColumns","name username type context host",
"",
ConfigurationKey::CUSTOMERTUNE,
ConfigurationKey::STRING,
"^(name){0,1} (username){0,1} (type){0,1} (context){0,1} (host){0,1}$",
false,
"A space separated list of columns to display in the subscriber registry manager."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("SubscriberRegistry.Port","5064",
"",
ConfigurationKey::CUSTOMERWARN,
ConfigurationKey::PORT,
"",
false,
"Port used by the SIP Authentication Server. NOTE: In some older releases (pre-2.8.1) this is called SIP.myPort."
);
map[tmp->getName()] = *tmp;
delete tmp;
tmp = new ConfigurationKey("SubscriberRegistry.UpstreamServer","",
"",
ConfigurationKey::CUSTOMERWARN,
ConfigurationKey::STRING_OPT,// audited
"",
false,
"URL of the subscriber registry HTTP interface on the upstream server. "
"By default, this feature is disabled. "
"To enable, specify a server URL eg: http://localhost/cgi/subreg.cgi. "
"To disable again, execute \"unconfig SubscriberRegistry.UpstreamServer\"."
);
map[tmp->getName()] = *tmp;
delete tmp;
return map;
}