void
PartitionCoreModule::init()
{
CoreBackend* backend = CoreBackendManager::self()->backend();
auto devices = backend->scanDevices();
// Remove the device which contains / from the list
for ( auto it = devices.begin(); it != devices.end(); )
if ( hasRootPartition( *it ) )
it = devices.erase( it );
else
++it;
for ( auto device : devices )
{
auto deviceInfo = new DeviceInfo( device );
m_deviceInfos << deviceInfo;
deviceInfo->partitionModel->init( device );
}
m_deviceModel->init( devices );
m_bootLoaderModel->init( devices );
if ( QDir( "/sys/firmware/efi/efivars" ).exists() )
scanForEfiSystemPartitions(); //FIXME: this should be removed in favor of
// proper KPM support for EFI
}
void
PartitionCoreModule::init()
{
CoreBackend* backend = CoreBackendManager::self()->backend();
auto devices = backend->scanDevices( true );
// Remove the device which contains / from the list
for ( auto it = devices.begin(); it != devices.end(); )
if ( hasRootPartition( *it ) )
it = devices.erase( it );
else
++it;
for ( auto device : devices )
{
auto deviceInfo = new DeviceInfo( device );
m_deviceInfos << deviceInfo;
}
m_deviceModel->init( devices );
// The following PartUtils::runOsprober call in turn calls PartUtils::canBeResized,
// which relies on a working DeviceModel.
m_osproberLines = PartUtils::runOsprober( this );
for ( auto deviceInfo : m_deviceInfos )
{
deviceInfo->partitionModel->init( deviceInfo->device.data(), m_osproberLines );
}
m_bootLoaderModel->init( devices );
if ( QDir( "/sys/firmware/efi/efivars" ).exists() )
scanForEfiSystemPartitions(); //FIXME: this should be removed in favor of
// proper KPM support for EFI
}
Device*
PartitionCoreModule::createImmutableDeviceCopy( Device* device ) const
{
CoreBackend* backend = CoreBackendManager::self()->backend();
Device* deviceBefore = backend->scanDevice( device->deviceNode() );
return deviceBefore;
}
Calamares::JobResult
CreatePartitionTableJob::exec()
{
Report report( 0 );
QString message = tr( "The installer failed to create a partition table on %1." ).arg( m_device->name() );
CoreBackend* backend = CoreBackendManager::self()->backend();
QScopedPointer< CoreBackendDevice > backendDevice( backend->openDevice( m_device->deviceNode() ) );
if ( !backendDevice.data() )
{
return Calamares::JobResult::error(
message,
tr( "Could not open device %1." ).arg( m_device->deviceNode() )
);
}
QScopedPointer< PartitionTable > table( createTable() );
cDebug() << "Creating new partition table of type" << table->typeName()
<< ", uncommitted yet:\n" << table;
QProcess lsblk;
lsblk.setProgram( "lsblk" );
lsblk.setProcessChannelMode( QProcess::MergedChannels );
lsblk.start();
lsblk.waitForFinished();
cDebug() << "lsblk:\n" << lsblk.readAllStandardOutput();
QProcess mount;
mount.setProgram( "mount" );
mount.setProcessChannelMode( QProcess::MergedChannels );
mount.start();
mount.waitForFinished();
cDebug() << "mount:\n" << mount.readAllStandardOutput();
bool ok = backendDevice->createPartitionTable( report, *table );
if ( !ok )
{
return Calamares::JobResult::error(
message,
QString( "Text: %1\nCommand: %2\nOutput: %3\nStatus: %4" )
.arg( report.toText() )
.arg( report.command() )
.arg( report.output() )
.arg( report.status() )
);
}
return Calamares::JobResult::ok();
}
Calamares::JobResult
DeletePartitionJob::exec()
{
Report report( 0 );
QString message = tr( "The installer failed to delete partition %1." ).arg( m_partition->devicePath() );
if ( m_device->deviceNode() != m_partition->devicePath() )
{
return Calamares::JobResult::error(
message,
tr( "Partition (%1) and device (%2) do not match." )
.arg( m_partition->devicePath() )
.arg( m_device->deviceNode() )
);
}
CoreBackend* backend = CoreBackendManager::self()->backend();
QScopedPointer<CoreBackendDevice> backendDevice( backend->openDevice( m_device->deviceNode() ) );
if ( !backendDevice.data() )
{
return Calamares::JobResult::error(
message,
tr( "Could not open device %1." ).arg( m_device->deviceNode() )
);
}
QScopedPointer<CoreBackendPartitionTable> backendPartitionTable( backendDevice->openPartitionTable() );
if ( !backendPartitionTable.data() )
{
return Calamares::JobResult::error(
message,
tr( "Could not open partition table." )
);
}
bool ok = backendPartitionTable->deletePartition( report, *m_partition );
if ( !ok )
{
return Calamares::JobResult::error(
message,
report.toText()
);
}
backendPartitionTable->commit();
return Calamares::JobResult::ok();
}
Calamares::JobResult
CreatePartitionJob::exec()
{
int step = 0;
const qreal stepCount = 4;
Report report( 0 );
QString message = tr( "The installer failed to create partition on disk '%1'." ).arg( m_device->name() );
progress( step++ / stepCount );
CoreBackend* backend = CoreBackendManager::self()->backend();
QScopedPointer<CoreBackendDevice> backendDevice( backend->openDevice( m_device->deviceNode() ) );
if ( !backendDevice.data() )
{
return Calamares::JobResult::error(
message,
tr( "Could not open device '%1'." ).arg( m_device->deviceNode() )
);
}
progress( step++ / stepCount );
QScopedPointer<CoreBackendPartitionTable> backendPartitionTable( backendDevice->openPartitionTable() );
if ( !backendPartitionTable.data() )
{
return Calamares::JobResult::error(
message,
tr( "Could not open partition table." )
);
}
progress( step++ / stepCount );
QString partitionPath = backendPartitionTable->createPartition( report, *m_partition );
if ( partitionPath.isEmpty() )
{
return Calamares::JobResult::error(
message,
report.toText()
);
}
m_partition->setPartitionPath( partitionPath );
backendPartitionTable->commit();
progress( step++ / stepCount );
FileSystem& fs = m_partition->fileSystem();
if ( fs.type() == FileSystem::Unformatted || fs.type() == FileSystem::Extended )
return Calamares::JobResult::ok();
if ( !fs.create( report, partitionPath ) )
{
return Calamares::JobResult::error(
tr( "The installer failed to create file system on partition %1." ).arg( partitionPath ),
report.toText()
);
}
if ( !backendPartitionTable->setPartitionSystemType( report, *m_partition ) )
{
return Calamares::JobResult::error(
tr( "The installer failed to update partition table on disk '%1'." ).arg( m_device->name() ),
report.toText()
);
}
backendPartitionTable->commit();
return Calamares::JobResult::ok();
}
void
PartitionCoreModule::doInit()
{
FileSystemFactory::init();
using DeviceList = QList< Device* >;
CoreBackend* backend = CoreBackendManager::self()->backend();
DeviceList devices = backend->scanDevices( true );
cDebug() << "Winnowing" << devices.count() << "devices.";
// Remove the device which contains / from the list
for ( DeviceList::iterator it = devices.begin(); it != devices.end(); )
if ( ! (*it) || hasRootPartition( *it ) ||
(*it)->deviceNode().startsWith( "/dev/zram") ||
isIso9660( *it ) )
{
cDebug() << " .. Winnowing" << ( (*it) ? (*it)->deviceNode() : QString( "<null device>" ) );
it = devices.erase( it );
}
else
++it;
cDebug() << "LIST OF DETECTED DEVICES:";
cDebug() << "node\tcapacity\tname\tprettyName";
for ( auto device : devices )
{
auto deviceInfo = new DeviceInfo( device );
m_deviceInfos << deviceInfo;
cDebug() << device->deviceNode() << device->capacity() << device->name() << device->prettyName();
}
cDebug() << ".." << devices.count() << "devices detected.";
m_deviceModel->init( devices );
// The following PartUtils::runOsprober call in turn calls PartUtils::canBeResized,
// which relies on a working DeviceModel.
m_osproberLines = PartUtils::runOsprober( this );
// We perform a best effort of filling out filesystem UUIDs in m_osproberLines
// because we will need them later on in PartitionModel if partition paths
// change.
// It is a known fact that /dev/sda1-style device paths aren't persistent
// across reboots (and this doesn't affect us), but partition numbers can also
// change at runtime against our will just for shits and giggles.
// But why would that ever happen? What system could possibly be so poorly
// designed that it requires a partition path rearrangement at runtime?
// Logical partitions on an MSDOS disklabel of course.
// See DeletePartitionJob::updatePreview.
for ( auto deviceInfo : m_deviceInfos )
{
for ( auto it = PartitionIterator::begin( deviceInfo->device.data() );
it != PartitionIterator::end( deviceInfo->device.data() ); ++it )
{
Partition* partition = *it;
for ( auto jt = m_osproberLines.begin();
jt != m_osproberLines.end(); ++jt )
{
if ( jt->path == partition->partitionPath() &&
partition->fileSystem().supportGetUUID() != FileSystem::cmdSupportNone &&
!partition->fileSystem().uuid().isEmpty() )
{
jt->uuid = partition->fileSystem().uuid();
}
}
}
}
for ( auto deviceInfo : m_deviceInfos )
{
deviceInfo->partitionModel->init( deviceInfo->device.data(), m_osproberLines );
}
m_bootLoaderModel->init( devices );
if ( QDir( "/sys/firmware/efi/efivars" ).exists() )
scanForEfiSystemPartitions(); //FIXME: this should be removed in favor of
// proper KPM support for EFI
}