void DIALOG_DIMENSION_EDITOR::OnOKClick( wxCommandEvent& event )
{
if( m_DC ) // Delete old text.
{
CurrentDimension->Draw( m_Parent->GetCanvas(), m_DC, GR_XOR );
}
m_Parent->SaveCopyInUndoList(CurrentDimension, UR_CHANGED);
if( m_Name->GetValue() != wxEmptyString )
{
CurrentDimension->SetText( m_Name->GetValue() );
}
wxString msg;
// Get new size value:
msg = m_TxtSizeXCtrl->GetValue();
CurrentDimension->Text().SetWidth( ReturnValueFromString( g_UserUnit, msg ) );
msg = m_TxtSizeYCtrl->GetValue();
CurrentDimension->Text().SetHeight( ReturnValueFromString( g_UserUnit, msg ) );
// Get new position value:
// It will be copied later in dimension, because
msg = m_textCtrlPosX->GetValue();
wxPoint pos;
pos.x = ReturnValueFromString( g_UserUnit, msg );
msg = m_textCtrlPosY->GetValue();
pos.y = ReturnValueFromString( g_UserUnit, msg );
CurrentDimension->Text().SetTextPosition( pos );
// Get new line thickness value:
msg = m_TxtWidthCtrl->GetValue();
int width = ReturnValueFromString( g_UserUnit, msg );
int maxthickness = Clamp_Text_PenSize( width, CurrentDimension->Text().GetSize() );
if( width > maxthickness )
{
DisplayError( NULL,
_( "The text thickness is too large for the text size. It will be clamped") );
width = maxthickness;
}
CurrentDimension->SetWidth( width );
CurrentDimension->Text().SetThickness( width );
CurrentDimension->Text().SetMirrored( ( m_rbMirror->GetSelection() == 1 ) ? true : false );
CurrentDimension->SetLayer( m_SelLayerBox->GetLayerSelection() );
if( m_DC ) // Display new text
{
CurrentDimension->Draw( m_Parent->GetCanvas(), m_DC, GR_OR );
}
m_Parent->OnModify();
EndModal( 1 );
}
/*
* Abort current text edit progress.
*
* If a text is selected, its initial coord are regenerated
*/
void AbortMoveDimensionText( EDA_DRAW_PANEL* aPanel, wxDC* aDC )
{
DIMENSION* dimension = (DIMENSION*) aPanel->GetScreen()->GetCurItem();
( (PCB_EDIT_FRAME*) aPanel->GetParent() )->SetCurItem( NULL );
aPanel->SetMouseCapture( NULL, NULL );
if( dimension == NULL ) // Should not occur
return;
dimension->Draw( aPanel, aDC, GR_XOR );
dimension->Text().SetTextPosition( initialTextPosition );
dimension->ClearFlags();
dimension->Draw( aPanel, aDC, GR_OR );
}
/* Move dimension text following the cursor. */
static void MoveDimensionText( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
bool aErase )
{
DIMENSION* dimension = (DIMENSION*) aPanel->GetScreen()->GetCurItem();
if( dimension == NULL )
return;
if( aErase )
dimension->Draw( aPanel, aDC, GR_XOR );
dimension->Text().SetTextPosition( aPanel->GetParent()->GetCrossHairPosition() );
dimension->Draw( aPanel, aDC, GR_XOR );
}
void DIALOG_DIMENSION_EDITOR::OnOKClick( wxCommandEvent& event )
{
LAYER_ID newlayer = ToLAYER_ID( m_SelLayerBox->GetLayerSelection() );
if( !m_Parent->GetBoard()->IsLayerEnabled( newlayer ) )
{
wxMessageBox( _( "The layer currently selected is not enabled for this board\n"
"You cannot use it" ) );
return;
}
#ifndef USE_WX_OVERLAY
if( m_DC ) // Delete old text.
{
CurrentDimension->Draw( m_Parent->GetCanvas(), m_DC, GR_XOR );
}
#endif
m_Parent->SaveCopyInUndoList(CurrentDimension, UR_CHANGED);
if( m_Name->GetValue() != wxEmptyString )
{
CurrentDimension->SetText( m_Name->GetValue() );
}
wxString msg;
// Get new size value:
msg = m_TxtSizeXCtrl->GetValue();
CurrentDimension->Text().SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_TxtSizeYCtrl->GetValue();
CurrentDimension->Text().SetHeight( ValueFromString( g_UserUnit, msg ) );
// Get new position value:
// It will be copied later in dimension, because
msg = m_textCtrlPosX->GetValue();
wxPoint pos;
pos.x = ValueFromString( g_UserUnit, msg );
msg = m_textCtrlPosY->GetValue();
pos.y = ValueFromString( g_UserUnit, msg );
CurrentDimension->Text().SetTextPosition( pos );
// Get new line thickness value:
msg = m_TxtWidthCtrl->GetValue();
int width = ValueFromString( g_UserUnit, msg );
int maxthickness = Clamp_Text_PenSize( width, CurrentDimension->Text().GetSize() );
if( width > maxthickness )
{
DisplayError( NULL,
_( "The text thickness is too large for the text size. "
"It will be clamped" ) );
width = maxthickness;
}
CurrentDimension->SetWidth( width );
CurrentDimension->Text().SetThickness( width );
CurrentDimension->Text().SetMirrored( ( m_rbMirror->GetSelection() == 1 ) ? true : false );
CurrentDimension->SetLayer( newlayer );
#ifndef USE_WX_OVERLAY
if( m_DC ) // Display new text
{
CurrentDimension->Draw( m_Parent->GetCanvas(), m_DC, GR_OR );
}
#else
m_Parent->Refresh();
#endif
m_Parent->OnModify();
EndModal( 1 );
}
int DRAWING_TOOL::DrawDimension( const TOOL_EVENT& aEvent )
{
DIMENSION* dimension = NULL;
int width, maxThickness;
// if one day it is possible to draw dimensions in the footprint editor,
// then hereby I'm letting you know that this tool does not handle UR_MODEDIT undo yet
assert( !m_editModules );
// Add a VIEW_GROUP that serves as a preview for the new item
KIGFX::VIEW_GROUP preview( m_view );
m_view->Add( &preview );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_controls->ShowCursor( true );
m_controls->SetSnapping( true );
Activate();
m_frame->SetToolID( ID_PCB_DIMENSION_BUTT, wxCURSOR_PENCIL, _( "Add dimension" ) );
enum DIMENSION_STEPS
{
SET_ORIGIN = 0,
SET_END,
SET_HEIGHT,
FINISHED
};
int step = SET_ORIGIN;
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
VECTOR2I cursorPos = m_controls->GetCursorPosition();
if( evt->IsCancel() || evt->IsActivate() )
{
if( step != SET_ORIGIN ) // start from the beginning
{
preview.Clear();
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
delete dimension;
step = SET_ORIGIN;
}
else
break;
if( evt->IsActivate() ) // now finish unconditionally
break;
}
else if( evt->IsAction( &COMMON_ACTIONS::incWidth ) && step != SET_ORIGIN )
{
dimension->SetWidth( dimension->GetWidth() + WIDTH_STEP );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else if( evt->IsAction( &COMMON_ACTIONS::decWidth ) && step != SET_ORIGIN )
{
int width = dimension->GetWidth();
if( width > WIDTH_STEP )
{
dimension->SetWidth( width - WIDTH_STEP );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
else if( evt->IsClick( BUT_LEFT ) )
{
switch( step )
{
case SET_ORIGIN:
{
LAYER_ID layer = m_frame->GetScreen()->m_Active_Layer;
if( IsCopperLayer( layer ) || layer == Edge_Cuts )
{
DisplayInfoMessage( NULL, _( "Dimension not allowed on Copper or Edge Cut layers" ) );
--step;
}
else
{
// Init the new item attributes
dimension = new DIMENSION( m_board );
dimension->SetLayer( layer );
dimension->SetOrigin( wxPoint( cursorPos.x, cursorPos.y ) );
dimension->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
dimension->Text().SetSize( m_board->GetDesignSettings().m_PcbTextSize );
width = m_board->GetDesignSettings().m_PcbTextWidth;
maxThickness = Clamp_Text_PenSize( width, dimension->Text().GetSize() );
if( width > maxThickness )
width = maxThickness;
dimension->Text().SetThickness( width );
dimension->SetWidth( width );
dimension->AdjustDimensionDetails();
preview.Add( dimension );
m_controls->SetAutoPan( true );
m_controls->CaptureCursor( true );
}
}
break;
case SET_END:
dimension->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
// Dimensions that have origin and end in the same spot are not valid
if( dimension->GetOrigin() == dimension->GetEnd() )
--step;
break;
case SET_HEIGHT:
{
if( wxPoint( cursorPos.x, cursorPos.y ) != dimension->GetPosition() )
{
assert( dimension->GetOrigin() != dimension->GetEnd() );
assert( dimension->GetWidth() > 0 );
m_view->Add( dimension );
m_board->Add( dimension );
dimension->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
m_frame->OnModify();
m_frame->SaveCopyInUndoList( dimension, UR_NEW );
preview.Remove( dimension );
}
}
break;
}
if( ++step == FINISHED )
{
step = SET_ORIGIN;
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
}
}
else if( evt->IsMotion() )
{
switch( step )
{
case SET_END:
dimension->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
break;
case SET_HEIGHT:
{
// Calculating the direction of travel perpendicular to the selected axis
double angle = dimension->GetAngle() + ( M_PI / 2 );
wxPoint pos( cursorPos.x, cursorPos.y );
wxPoint delta( pos - dimension->m_featureLineDO );
double height = ( delta.x * cos( angle ) ) + ( delta.y * sin( angle ) );
dimension->SetHeight( height );
}
break;
}
// Show a preview of the item
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
if( step != SET_ORIGIN )
delete dimension;
m_controls->ShowCursor( false );
m_controls->SetSnapping( false );
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
m_view->Remove( &preview );
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}
DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES( PCB_BASE_EDIT_FRAME* aParent, BOARD_ITEM* aItem ) :
DIALOG_TEXT_PROPERTIES_BASE( aParent ),
m_Parent( aParent ), m_item( aItem ),
m_edaText( nullptr ), m_modText( nullptr ), m_pcbText( nullptr ),
m_textWidth( aParent, m_SizeXLabel, m_SizeXCtrl, m_SizeXUnits, true ),
m_textHeight( aParent, m_SizeYLabel, m_SizeYCtrl, m_SizeYUnits, true ),
m_thickness( aParent, m_ThicknessLabel, m_ThicknessCtrl, m_ThicknessUnits, true ),
m_posX( aParent, m_PositionXLabel, m_PositionXCtrl, m_PositionXUnits ),
m_posY( aParent, m_PositionYLabel, m_PositionYCtrl, m_PositionYUnits ),
m_OrientValidator( 1, &m_OrientValue )
{
wxString title;
if( m_item->Type() == PCB_DIMENSION_T )
{
title = _( "Dimension Text Properties" );
DIMENSION* dimension = (DIMENSION*) m_item;
m_edaText = &dimension->Text();
m_pcbText = &dimension->Text();
SetInitialFocus( m_DimensionText );
m_SingleLineSizer->Show( false );
m_MultiLineSizer->Show( false );
m_KeepUpright->Show( false );
m_statusLine->Show( false );
}
else if( m_item->Type() == PCB_MODULE_TEXT_T )
{
title = _( "Footprint Text Properties" );
m_modText = (TEXTE_MODULE*) m_item;
m_edaText = static_cast<EDA_TEXT*>( m_modText );
switch( m_modText->GetType() )
{
case TEXTE_MODULE::TEXT_is_REFERENCE: m_TextLabel->SetLabel( _( "Reference:" ) ); break;
case TEXTE_MODULE::TEXT_is_VALUE: m_TextLabel->SetLabel( _( "Value:" ) ); break;
case TEXTE_MODULE::TEXT_is_DIVERS: m_TextLabel->SetLabel( _( "Text:" ) ); break;
}
SetInitialFocus( m_SingleLineText );
m_MultiLineSizer->Show( false );
m_DimensionTextSizer->Show( false );
}
else
{
title = _( "Text Properties" );
m_pcbText = (TEXTE_PCB*) aItem;
m_edaText = static_cast<EDA_TEXT*>( m_pcbText );
SetInitialFocus( m_MultiLineText );
m_SingleLineSizer->Show( false );
m_DimensionTextSizer->Show( false );
// This option make sense only for footprint texts,
// Texts on board are always visible:
m_Visible->SetValue( true );
m_Visible->Show( false );
m_KeepUpright->Show( false );
m_statusLine->Show( false );
}
SetTitle( title );
m_hash_key = title;
// Configure the layers list selector. Note that footprints are built outside the current
// board and so we may need to show all layers if the text is on an unactivated layer.
if( !m_Parent->GetBoard()->IsLayerEnabled( m_item->GetLayer() ) )
m_LayerSelectionCtrl->ShowNonActivatedLayers( true );
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetNotAllowedLayerSet( LSET::ForbiddenTextLayers() );
m_LayerSelectionCtrl->SetBoardFrame( m_Parent );
m_LayerSelectionCtrl->Resync();
m_OrientValue = 0.0;
m_OrientValidator.SetRange( -360.0, 360.0 );
m_OrientCtrl->SetValidator( m_OrientValidator );
m_OrientValidator.SetWindow( m_OrientCtrl );
// Handle decimal separators in combo dropdown
for( size_t i = 0; i < m_OrientCtrl->GetCount(); ++i )
{
wxString item = m_OrientCtrl->GetString( i );
item.Replace( '.', localeconv()->decimal_point[0] );
m_OrientCtrl->SetString( i, item );
}
// Set font sizes
wxFont infoFont = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT );
infoFont.SetSymbolicSize( wxFONTSIZE_SMALL );
m_statusLine->SetFont( infoFont );
m_sdbSizerOK->SetDefault();
// Tab down the left side first
KIUI::SetControlsTabOrder( {
m_LayerLabel,
m_LayerSelectionCtrl,
m_SizeXCtrl,
m_SizeYCtrl,
m_ThicknessCtrl,
m_PositionXCtrl,
m_PositionYCtrl,
m_Visible,
m_Italic,
m_JustifyChoice,
m_OrientCtrl,
m_Mirrored,
m_KeepUpright,
} );
// wxTextCtrls fail to generate wxEVT_CHAR events when the wxTE_MULTILINE flag is set,
// so we have to listen to wxEVT_CHAR_HOOK events instead.
Connect( wxEVT_CHAR_HOOK, wxKeyEventHandler( DIALOG_TEXT_PROPERTIES::OnCharHook ), NULL, this );
FinishDialogSettings();
}
void DIALOG_DIMENSION_EDITOR::OnOKClick( wxCommandEvent& event )
{
BOARD_COMMIT commit( m_parent );
PCB_LAYER_ID newlayer = ToLAYER_ID( m_SelLayerBox->GetLayerSelection() );
if( !m_parent->GetBoard()->IsLayerEnabled( newlayer ) )
{
wxMessageBox( _( "The layer currently selected is not enabled for this board\n"
"You cannot use it" ) );
return;
}
#ifndef USE_WX_OVERLAY
if( m_DC ) // Delete old text.
{
m_currentDimension->Draw( m_parent->GetCanvas(), m_DC, GR_XOR );
}
#endif
commit.Modify( m_currentDimension );
if( m_Name->GetValue() != wxEmptyString )
{
m_currentDimension->SetText( m_Name->GetValue() );
}
wxString msg;
// Get new size value:
msg = m_TxtSizeXCtrl->GetValue();
m_currentDimension->Text().SetTextWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_TxtSizeYCtrl->GetValue();
m_currentDimension->Text().SetTextHeight( ValueFromString( g_UserUnit, msg ) );
// Get new position value:
// It will be copied later in dimension, because
msg = m_textCtrlPosX->GetValue();
wxPoint pos;
pos.x = ValueFromString( g_UserUnit, msg );
msg = m_textCtrlPosY->GetValue();
pos.y = ValueFromString( g_UserUnit, msg );
m_currentDimension->Text().SetTextPos( pos );
// Get new line thickness value:
msg = m_TxtWidthCtrl->GetValue();
int width = ValueFromString( g_UserUnit, msg );
int maxthickness = Clamp_Text_PenSize( width, m_currentDimension->Text().GetTextSize() );
if( width > maxthickness )
{
DisplayError( NULL,
_( "The text thickness is too large for the text size. "
"It will be clamped" ) );
width = maxthickness;
}
m_currentDimension->SetWidth( width );
m_currentDimension->Text().SetThickness( width );
m_currentDimension->Text().SetMirrored( ( m_rbMirror->GetSelection() == 1 ) ? true : false );
m_currentDimension->SetLayer( newlayer );
#ifndef USE_WX_OVERLAY
if( m_DC ) // Display new text
{
m_currentDimension->Draw( m_parent->GetCanvas(), m_DC, GR_OR );
}
#else
m_parent->Refresh();
#endif
commit.Push( _( "Modifed dimensions properties" ) );
event.Skip(); // ends returning wxID_OK (default behavior)
}
