Ejemplos de DVBT_DEMOD_MODULE::Initialize en C++ (Cpp)

Ejemplo n.º 1

Archivo: nim_rtl2832_fc2580.c Proyecto: OpenHMR/Open-HMR600

/**

@see   DVBT_NIM_FP_INITIALIZE

*/
int
rtl2832_fc2580_Initialize(
	DVBT_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		int RegBitName;
		unsigned long Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_FC2580_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DVBT_DAGC_TRG_VAL,			0x39	},
		{DVBT_AGC_TARG_VAL_0,		0x0		},
		{DVBT_AGC_TARG_VAL_8_1,		0x5a	},
		{DVBT_AAGC_LOOP_GAIN,		0x16    },
		{DVBT_LOOP_GAIN2_3_0,		0x6		},
		{DVBT_LOOP_GAIN2_4,			0x1		},
		{DVBT_LOOP_GAIN3,			0x16	},
		{DVBT_VTOP1,				0x35	},
		{DVBT_VTOP2,				0x21	},
		{DVBT_VTOP3,				0x21	},
		{DVBT_KRF1,					0x0		},
		{DVBT_KRF2,					0x40	},
		{DVBT_KRF3,					0x10	},
		{DVBT_KRF4,					0x10	},
		{DVBT_IF_AGC_MIN,			0x80	},
		{DVBT_IF_AGC_MAX,			0x7f	},
		{DVBT_RF_AGC_MIN,			0x9c	},
		{DVBT_RF_AGC_MAX,			0x7f	},
		{DVBT_POLAR_RF_AGC,			0x0		},
		{DVBT_POLAR_IF_AGC,			0x0		},
		{DVBT_AD7_SETTING,			0xe9f4	},
	};


	TUNER_MODULE *pTuner;
	DVBT_DEMOD_MODULE *pDemod;

	int i;

	int RegBitName;
	unsigned long Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;


	// Enable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod IF frequency with 0 Hz.
	if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_0HZ) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with SPECTRUM_NORMAL.
	if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Set demod registers.
	for(i = 0; i < RTL2832_FC2580_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}


	// Set TS interface according to TS interface mode.
	switch(pNim->DemodTsInterfaceMode)
	{
		case TS_INTERFACE_PARALLEL:

			// Set demod TS interface with parallel mode.
			if(pDemod->SetRegBitsWithPage(pDemod, DVBT_SERIAL,   0) != FUNCTION_SUCCESS)
				goto error_status_set_registers;

			if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH0, 9) != FUNCTION_SUCCESS)
				goto error_status_set_registers;

			if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH1, 9) != FUNCTION_SUCCESS)
				goto error_status_set_registers;

			break;


		default:
		case TS_INTERFACE_SERIAL:

			// Set demod TS interface with serial mode.
			if(pDemod->SetRegBitsWithPage(pDemod, DVBT_SERIAL,   1) != FUNCTION_SUCCESS)
				goto error_status_set_registers;

			if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH0, 2) != FUNCTION_SUCCESS)
				goto error_status_set_registers;

			if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH1, 2) != FUNCTION_SUCCESS)
				goto error_status_set_registers;

			break;
	}


	return FUNCTION_SUCCESS;


error_status_execute_function:
error_status_set_registers:
	return FUNCTION_ERROR;
}

Ejemplo n.º 2

Archivo: nim_rtl2832_tda18272.c Proyecto: ldy972/Drone

/**
 * @see   DVBT_NIM_FP_INITIALIZE
 */
s32 rtl2832_tda18272_Initialize(DVBT_NIM_MODULE *pNim)
{
	typedef struct
	{
		s32 RegBitName;
		u64 Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_TDA18272_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DVBT_DAGC_TRG_VAL,			0x39	},
		{DVBT_AGC_TARG_VAL_0,		0x0		},
		{DVBT_AGC_TARG_VAL_8_1,		0x40	},
		{DVBT_AAGC_LOOP_GAIN,		0x16    },
		{DVBT_LOOP_GAIN2_3_0,		0x8		},
		{DVBT_LOOP_GAIN2_4,			0x1		},
		{DVBT_LOOP_GAIN3,			0x18	},
		{DVBT_VTOP1,				0x35	},
		{DVBT_VTOP2,				0x21	},
		{DVBT_VTOP3,				0x21	},
		{DVBT_KRF1,					0x0		},
		{DVBT_KRF2,					0x40	},
		{DVBT_KRF3,					0x10	},
		{DVBT_KRF4,					0x10	},
		{DVBT_IF_AGC_MIN,			0x80	},
		{DVBT_IF_AGC_MAX,			0x7f	},
		{DVBT_RF_AGC_MIN,			0x80	},
		{DVBT_RF_AGC_MAX,			0x7f	},
		{DVBT_POLAR_RF_AGC,			0x0		},
		{DVBT_POLAR_IF_AGC,			0x0		},
		{DVBT_AD7_SETTING,			0xe9f4	},
	};


	TUNER_MODULE *pTuner;
	DVBT_DEMOD_MODULE *pDemod;

	s32 i;

	s32 RegBitName;
	u64 Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;


	// Enable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	// Note: TDA18272 tuner uses dynamic IF frequency, so we will set demod IF frequency in SetParameters().
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with SPECTRUM_INVERSE.
	if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_INVERSE) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Set demod registers.
	for(i = 0; i < RTL2832_TDA18272_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}


	return FUNCTION_SUCCESS;


error_status_execute_function:
error_status_set_registers:
	return FUNCTION_ERROR;
}

Ejemplo n.º 3

Archivo: nim_rtl2832_fc0013.c Proyecto: BalintBanyasz/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0

/**

@see   DVBT_NIM_FP_INITIALIZE

*/
int
rtl2832_fc0013_Initialize(
	DVBT_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		int RegBitName;
		unsigned long Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_FC0013_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DVBT_DAGC_TRG_VAL,			0x5a	},
		{DVBT_AGC_TARG_VAL_0,		0x0		},
		{DVBT_AGC_TARG_VAL_8_1,		0x5a	},
		{DVBT_AAGC_LOOP_GAIN,		0x16    },
		{DVBT_LOOP_GAIN2_3_0,		0x6		},
		{DVBT_LOOP_GAIN2_4,			0x1		},
		{DVBT_LOOP_GAIN3,			0x16	},
		{DVBT_VTOP1,				0x35	},
		{DVBT_VTOP2,				0x21	},
		{DVBT_VTOP3,				0x21	},
		{DVBT_KRF1,					0x0		},
		{DVBT_KRF2,					0x40	},
		{DVBT_KRF3,					0x10	},
		{DVBT_KRF4,					0x10	},
		{DVBT_IF_AGC_MIN,			0x80	},
		{DVBT_IF_AGC_MAX,			0x7f	},
		{DVBT_RF_AGC_MIN,			0x80	},
		{DVBT_RF_AGC_MAX,			0x7f	},
		{DVBT_POLAR_RF_AGC,			0x0		},
		{DVBT_POLAR_IF_AGC,			0x0		},
		{DVBT_AD7_SETTING,			0xe9bf	},
		{DVBT_EN_GI_PGA,			0x0		},
		{DVBT_THD_LOCK_UP,			0x0		},
		{DVBT_THD_LOCK_DW,			0x0		},
		{DVBT_THD_UP1,				0x11	},
		{DVBT_THD_DW1,				0xef	},
		{DVBT_INTER_CNT_LEN,		0xc		},
		{DVBT_GI_PGA_STATE,			0x0		},
		{DVBT_EN_AGC_PGA,			0x1		},
//		{DVBT_REG_GPE,				0x1		},
//		{DVBT_REG_GPO,				0x0		},
//		{DVBT_REG_MONSEL,			0x0		},
//		{DVBT_REG_MON,				0x3		},
//		{DVBT_REG_4MSEL,			0x0		},
	};


	TUNER_MODULE *pTuner;
	DVBT_DEMOD_MODULE *pDemod;

	int i;

	int RegBitName;
	unsigned long Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;


	// Enable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set FC0013 up-dowm AGC.
	//(0xFE for master of dual).
	//(0xFC for slave of dual, and for 2832 mini dongle).
	if(fc0013_SetRegMaskBits(pTuner, 0x0c, 7, 0, 0xFC) != FC0013_I2C_SUCCESS)
		goto error_status_set_tuner_registers;

	// Disable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod IF frequency with 0 Hz.
	if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_0HZ) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with SPECTRUM_NORMAL.
	if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Set demod registers.
	for(i = 0; i < RTL2832_FC0013_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}

	// Reset demod by software reset.
	if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Enable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Get tuner RSSI value when calibration is on.
	// Note: Need to execute rtl2832_fc0013_GetTunerRssiCalOn() after demod AD7 is on.
	if(rtl2832_fc0013_GetTunerRssiCalOn(pNim) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	return FUNCTION_SUCCESS;


error_status_execute_function:
error_status_set_registers:
error_status_set_tuner_registers:
	return FUNCTION_ERROR;
}

Ejemplo n.º 4

Archivo: nim_rtl2832_max3543.c Proyecto: ambrosa/DVB-Realtek-RTL2832U-2.2.2-10_tuner

/**

@see   DVBT_NIM_FP_INITIALIZE

*/
int
rtl2832_max3543_Initialize(
	DVBT_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		int RegBitName;
		unsigned long Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DVBT_DAGC_TRG_VAL,			0x39	},
		{DVBT_AGC_TARG_VAL_0,		0x0		},
		{DVBT_AGC_TARG_VAL_8_1,		0x4b	},
		{DVBT_AAGC_LOOP_GAIN,		0x16    },
		{DVBT_LOOP_GAIN2_3_0,		0x6		},
		{DVBT_LOOP_GAIN2_4,			0x1		},
		{DVBT_LOOP_GAIN3,			0x16	},
		{DVBT_VTOP1,				0x35	},
		{DVBT_VTOP2,				0x21	},
		{DVBT_VTOP3,				0x21	},
		{DVBT_KRF1,					0x0		},
		{DVBT_KRF2,					0x40	},
		{DVBT_KRF3,					0x10	},
		{DVBT_KRF4,					0x10	},
		{DVBT_IF_AGC_MIN,			0x80	},
		{DVBT_IF_AGC_MAX,			0x7f	},
		{DVBT_RF_AGC_MIN,			0x80	},
		{DVBT_RF_AGC_MAX,			0x7f	},
		{DVBT_POLAR_RF_AGC,			0x0		},
		{DVBT_POLAR_IF_AGC,			0x0		},
		{DVBT_AD7_SETTING,			0xe9d4	},
		{DVBT_AD_EN_REG1,			0x0		},
		{DVBT_CKOUT_PWR_PID,		0x0		},
	};


	TUNER_MODULE *pTuner;
	DVBT_DEMOD_MODULE *pDemod;

	int i;

	int RegBitName;
	unsigned long Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;


	// Enable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod IF frequency with NIM default.
	if(pDemod->SetIfFreqHz(pDemod, RTL2832_MAX3543_IF_FREQ_HZ_DEFAULT) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with NIM default.
	if(pDemod->SetSpectrumMode(pDemod, RTL2832_MAX3543_SPECTRUM_MODE_DEFAULT) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Set demod registers.
	for(i = 0; i < RTL2832_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}


	return FUNCTION_SUCCESS;


error_status_execute_function:
error_status_set_registers:
	return FUNCTION_ERROR;
}

Ejemplo n.º 5

Archivo: nim_rtl2832_r820t.c Proyecto: ElectryDev/android_kernel_grouper

/**

@see   DVBT_NIM_FP_INITIALIZE

*/
int
rtl2832_r820t_Initialize(
	DVBT_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		int RegBitName;
		unsigned long Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_R820T_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DVBT_DAGC_TRG_VAL,			0x39	},
		{DVBT_AGC_TARG_VAL_0,		0x0		},
		{DVBT_AGC_TARG_VAL_8_1,		0x40	},
		{DVBT_AAGC_LOOP_GAIN,		0x16    },
		{DVBT_LOOP_GAIN2_3_0,		0x8		},
		{DVBT_LOOP_GAIN2_4,			0x1		},
		{DVBT_LOOP_GAIN3,			0x18	},
		{DVBT_VTOP1,				0x35	},
		{DVBT_VTOP2,				0x21	},
		{DVBT_VTOP3,				0x21	},
		{DVBT_KRF1,					0x0		},
		{DVBT_KRF2,					0x40	},
		{DVBT_KRF3,					0x10	},
		{DVBT_KRF4,					0x10	},
		{DVBT_IF_AGC_MIN,			0x80	},
		{DVBT_IF_AGC_MAX,			0x7f	},
		{DVBT_RF_AGC_MIN,			0x80	},
		{DVBT_RF_AGC_MAX,			0x7f	},
		{DVBT_POLAR_RF_AGC,			0x0		},
		{DVBT_POLAR_IF_AGC,			0x0		},
		{DVBT_AD7_SETTING,			0xe9f4	},
	};


	TUNER_MODULE *pTuner;
	DVBT_DEMOD_MODULE *pDemod;

	int i;

	int RegBitName;
	unsigned long Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;


	// Enable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with SPECTRUM_INVERSE.
	if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_INVERSE) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Set demod registers.
	for(i = 0; i < RTL2832_R820T_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}

	// Reset demod by software reset.
	if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	return FUNCTION_SUCCESS;


error_status_execute_function:
error_status_set_registers:
//error_status_set_tuner_registers:
	return FUNCTION_ERROR;
}