// Exec_CrdAction::ProcessArgs()
Exec::RetType Exec_CrdAction::ProcessArgs(CpptrajState& State, ArgList& argIn) {
std::string setname = argIn.GetStringNext();
if (setname.empty()) {
mprinterr("Error: %s: Specify COORDS dataset name.\n", argIn.Command());
return CpptrajState::ERR;
}
DataSet_Coords* CRD = (DataSet_Coords*)State.DSL().FindCoordsSet( setname );
if (CRD == 0) {
mprinterr("Error: %s: No COORDS set with name %s found.\n", argIn.Command(), setname.c_str());
return CpptrajState::ERR;
}
mprintf("\tUsing set '%s'\n", CRD->legend());
// Start, stop, offset
TrajFrameCounter frameCount;
ArgList crdarg( argIn.GetStringKey("crdframes"), "," );
if (frameCount.CheckFrameArgs( CRD->Size(), crdarg )) return CpptrajState::ERR;
frameCount.PrintInfoLine(CRD->legend());
ArgList actionargs = argIn.RemainingArgs();
actionargs.MarkArg(0);
Cmd const& cmd = Command::SearchTokenType( DispatchObject::ACTION, actionargs.Command() );
if ( cmd.Empty() ) return CpptrajState::ERR;
Action* act = (Action*)cmd.Alloc();
if (act == 0) return CpptrajState::ERR;
CpptrajState::RetType err = DoCrdAction(State, actionargs, CRD, act, frameCount);
delete act;
return err;
}
// Exec_PermuteDihedrals::Execute()
Exec::RetType Exec_PermuteDihedrals::Execute(CpptrajState& State, ArgList& argIn) {
debug_ = State.Debug();
mode_ = INTERVAL;
// Get Keywords - first determine mode
if (argIn.hasKey("random"))
mode_ = RANDOM;
else if (argIn.hasKey("interval"))
mode_ = INTERVAL;
// Get input COORDS set
std::string setname = argIn.GetStringKey("crdset");
if (setname.empty()) {
mprinterr("Error: Specify COORDS dataset name with 'crdset'.\n");
return CpptrajState::ERR;
}
DataSet_Coords* CRD = (DataSet_Coords*)State.DSL().FindCoordsSet( setname );
if (CRD == 0) {
mprinterr("Error: Could not find COORDS set '%s'\n", setname.c_str());
return CpptrajState::ERR;
}
mprintf(" PERMUTEDIHEDRALS: Using COORDS '%s'\n", CRD->legend());
// Get residue range
Range resRange;
resRange.SetRange(argIn.GetStringKey("resrange"));
if (!resRange.Empty())
resRange.ShiftBy(-1); // User res args start from 1
mprintf("\tPermutating dihedrals in");
if (resRange.Empty())
mprintf(" all solute residues.\n");
else
mprintf(" residue range [%s]\n", resRange.RangeArg());
// Determine which angles to search for
DihedralSearch dihSearch;
dihSearch.SearchForArgs(argIn);
// If nothing is enabled, enable all
dihSearch.SearchForAll();
mprintf("\tSearching for types:");
dihSearch.PrintTypes();
mprintf("\n");
// Setup output trajectory
outframe_ = 0;
std::string outfilename = argIn.GetStringKey("outtraj");
if (!outfilename.empty()) {
mprintf("\tCoordinates output to '%s'\n", outfilename.c_str());
Topology* outtop = State.DSL().GetTopology( argIn );
if (outtop == 0) {
mprinterr("Error: No topology for output traj.\n");
return CpptrajState::ERR;
}
// Setup output trajectory FIXME: Correct frames for # of rotations
if (outtraj_.PrepareTrajWrite(outfilename, argIn, CRD->TopPtr(), CRD->CoordsInfo(),
CRD->Size(), TrajectoryFile::UNKNOWN_TRAJ))
return CpptrajState::ERR;
}
// Setup output coords
outfilename = argIn.GetStringKey("crdout");
if (!outfilename.empty()) {
mprintf("\tCoordinates saved to set '%s'\n", outfilename.c_str());
crdout_ = (DataSet_Coords_CRD*)State.DSL().AddSet(DataSet::COORDS, outfilename);
if (crdout_ == 0) return CpptrajState::ERR;
crdout_->CoordsSetup( CRD->Top(), CRD->CoordsInfo() );
}
// Get specific mode options.
double interval_in_deg = 60.0;
if ( mode_ == INTERVAL ) {
interval_in_deg = argIn.getNextDouble(60.0);
mprintf("\tDihedrals will be rotated at intervals of %.2f degrees.\n", interval_in_deg);
} else if (mode_ == RANDOM) {
check_for_clashes_ = argIn.hasKey("check");
checkAllResidues_ = argIn.hasKey("checkallresidues");
cutoff_ = argIn.getKeyDouble("cutoff",0.8);
rescutoff_ = argIn.getKeyDouble("rescutoff",10.0);
backtrack_ = argIn.getKeyInt("backtrack",4);
increment_ = argIn.getKeyInt("increment",1);
max_factor_ = argIn.getKeyInt("maxfactor",2);
int iseed = argIn.getKeyInt("rseed",-1);
// Output file for # of problems
DataFile* problemFile = State.DFL().AddDataFile(argIn.GetStringKey("out"), argIn);
// Dataset to store number of problems
number_of_problems_ = State.DSL().AddSet(DataSet::INTEGER, argIn.GetStringNext(),"Nprob");
if (number_of_problems_==0) return CpptrajState::ERR;
// Add dataset to data file list
if (problemFile != 0) problemFile->AddDataSet(number_of_problems_);
// Check validity of args
if (cutoff_ < Constants::SMALL) {
mprinterr("Error: cutoff too small.\n");
return CpptrajState::ERR;
}
if (rescutoff_ < Constants::SMALL) {
mprinterr("Error: rescutoff too small.\n");
return CpptrajState::ERR;
}
if (backtrack_ < 0) {
mprinterr("Error: backtrack value must be >= 0\n");
return CpptrajState::ERR;
}
if ( increment_<1 || (360 % increment_)!=0 ) {
mprinterr("Error: increment must be a factor of 360.\n");
return CpptrajState::ERR;
}
// Calculate max increment
max_increment_ = 360 / increment_;
// Seed random number gen
RN_.rn_set( iseed );
// Print info
mprintf("\tDihedrals will be rotated to random values.\n");
if (iseed==-1)
mprintf("\tRandom number generator will be seeded using time.\n");
else
mprintf("\tRandom number generator will be seeded using %i\n",iseed);
if (check_for_clashes_) {
mprintf("\tWill attempt to recover from bad steric clashes.\n");
if (checkAllResidues_)
mprintf("\tAll residues will be checked.\n");
else
mprintf("\tResidues up to the currenly rotating dihedral will be checked.\n");
mprintf("\tAtom cutoff %.2f, residue cutoff %.2f, backtrack = %i\n",
cutoff_, rescutoff_, backtrack_);
mprintf("\tWhen clashes occur dihedral will be incremented by %i\n",increment_);
mprintf("\tMax # attempted rotations = %i times number dihedrals.\n",
max_factor_);
}
// Square cutoffs to compare to dist^2 instead of dist
cutoff_ *= cutoff_;
rescutoff_ *= rescutoff_;
// Increment backtrack by 1 since we need to skip over current res
++backtrack_;
// Initialize CheckStructure
if (checkStructure_.SetOptions( false, false, false, State.Debug(), "*", "", 0.8, 1.15, 4.0 )) {
mprinterr("Error: Could not set up structure check.\n");
return CpptrajState::ERR;
}
// Set up CheckStructure for this parm (false = nobondcheck)
if (checkStructure_.Setup(CRD->Top(), CRD->CoordsInfo().TrajBox()))
return CpptrajState::ERR;
}
// Determine from selected mask atoms which dihedrals will be rotated.
PermuteDihedralsType dst;
// If range is empty (i.e. no resrange arg given) look through all
// solute residues.
Range actualRange;
if (resRange.Empty())
actualRange = CRD->Top().SoluteResidues();
else
actualRange = resRange;
// Search for dihedrals
if (dihSearch.FindDihedrals(CRD->Top(), actualRange))
return CpptrajState::ERR;
// For each found dihedral, set up mask of atoms that will move upon
// rotation. Also set up mask of atoms in this residue that will not
// move, including atom2.
if (debug_>0)
mprintf("DEBUG: Dihedrals:\n");
for (DihedralSearch::mask_it dih = dihSearch.begin();
dih != dihSearch.end(); ++dih)
{
dst.checkAtoms.clear();
// Set mask of atoms that will move during dihedral rotation.
dst.Rmask = DihedralSearch::MovingAtoms(CRD->Top(), dih->A1(), dih->A2());
// If randomly rotating angles, check for atoms that are in the same
// residue as A1 but will not move. They need to be checked for clashes
// since further rotations will not help them.
if (mode_ == RANDOM && check_for_clashes_) {
CharMask cMask( dst.Rmask.ConvertToCharMask(), dst.Rmask.Nselected() );
int a1res = CRD->Top()[dih->A1()].ResNum();
for (int maskatom = CRD->Top().Res(a1res).FirstAtom();
maskatom < CRD->Top().Res(a1res).LastAtom(); ++maskatom)
if (!cMask.AtomInCharMask(maskatom))
dst.checkAtoms.push_back( maskatom );
dst.checkAtoms.push_back(dih->A1()); // TODO: Does this need to be added first?
// Since only the second atom and atoms it is bonded to move during
// rotation, base the check on the residue of the second atom.
dst.resnum = a1res;
}
dst.atom0 = dih->A0(); // FIXME: This duplicates info
dst.atom1 = dih->A1();
dst.atom2 = dih->A2();
dst.atom3 = dih->A3();
BB_dihedrals_.push_back(dst);
// DEBUG: List dihedral info.
if (debug_ > 0) {
mprintf("\t%s-%s-%s-%s\n",
CRD->Top().TruncResAtomName(dih->A0()).c_str(),
CRD->Top().TruncResAtomName(dih->A1()).c_str(),
CRD->Top().TruncResAtomName(dih->A2()).c_str(),
CRD->Top().TruncResAtomName(dih->A3()).c_str() );
if (debug_ > 1 && mode_ == RANDOM && check_for_clashes_) {
mprintf("\t\tCheckAtoms=");
for (std::vector<int>::const_iterator ca = dst.checkAtoms.begin();
ca != dst.checkAtoms.end(); ++ca)
mprintf(" %i", *ca + 1);
mprintf("\n");
}
if (debug_ > 2) {
mprintf("\t\t");
dst.Rmask.PrintMaskAtoms("Rmask:");
}
}
}
// Set up simple structure check. First step is coarse; check distances
// between a certain atom in each residue (first, COM, CA, some other atom?)
// to see if residues are in each others neighborhood. Second step is to
// check the atoms in each close residue.
if (check_for_clashes_) {
ResidueCheckType rct;
int res = 0;
for (Topology::res_iterator residue = CRD->Top().ResStart();
residue != CRD->Top().ResEnd(); ++residue)
{
rct.resnum = res++;
rct.start = residue->FirstAtom();
rct.stop = residue->LastAtom();
rct.checkatom = rct.start;
ResCheck_.push_back(rct);
}
}
// Perform dihedral permute
Frame currentFrame = CRD->AllocateFrame();
for (unsigned int set = 0; set != CRD->Size(); set++)
{
CRD->GetFrame(set, currentFrame);
int n_problems = 0;
switch (mode_) {
case RANDOM:
RandomizeAngles(currentFrame, CRD->Top());
// Check the resulting structure
n_problems = checkStructure_.CheckOverlaps( currentFrame );
//mprintf("%i\tResulting structure has %i problems.\n",frameNum,n_problems);
number_of_problems_->Add(set, &n_problems);
if (outtraj_.IsInitialized()) outtraj_.WriteSingle(outframe_++, currentFrame);
if (crdout_ != 0) crdout_->AddFrame( currentFrame );
break;
case INTERVAL: IntervalAngles(currentFrame, CRD->Top(), interval_in_deg); break;
}
}
if (outtraj_.IsInitialized()) outtraj_.EndTraj();
return CpptrajState::OK;
}
Exec::RetType Exec_CrdAction::DoCrdAction(CpptrajState& State, ArgList& actionargs,
DataSet_Coords* CRD, Action* act,
TrajFrameCounter const& frameCount) const
{
Timer total_time;
total_time.Start();
# ifdef MPI
ActionInit state(State.DSL(), State.DFL(), trajComm_);
# else
ActionInit state(State.DSL(), State.DFL());
# endif
if ( act->Init( actionargs, state, State.Debug() ) != Action::OK )
return CpptrajState::ERR;
actionargs.CheckForMoreArgs();
// Set up frame and parm for COORDS.
ActionSetup originalSetup( CRD->TopPtr(), CRD->CoordsInfo(), CRD->Size() );
Frame originalFrame = CRD->AllocateFrame();
// Set up for this topology
Action::RetType setup_ret = act->Setup( originalSetup );
if ( setup_ret == Action::ERR || setup_ret == Action::SKIP )
return CpptrajState::ERR;
// If the topology was modified, we will need a new COORDS set.
DataSet_Coords* crdOut = 0;
if ( setup_ret == Action::MODIFY_TOPOLOGY ) {
// This will not work for a TRJ set.
switch ( CRD->Type() ) {
case DataSet::TRAJ : mprinterr("Error: Cannot modify TRAJ data sets.\n"); break;
case DataSet::COORDS : crdOut = (DataSet_Coords*)new DataSet_Coords_CRD(); break;
case DataSet::REF_FRAME : crdOut = (DataSet_Coords*)new DataSet_Coords_REF(); break;
default: crdOut = 0; // SANITY
}
if (crdOut == 0) return CpptrajState::ERR;
mprintf("Info: crdaction: COORDS set '%s' will be modified by action '%s'\n",
CRD->legend(), actionargs.Command());
if (frameCount.TotalReadFrames() != (int)CRD->Size())
mprintf("Info: crdaction: Previous size= %zu, new size is %i\n",
CRD->Size(), frameCount.TotalReadFrames());
// Set up set, copy original metadata
crdOut->SetMeta( CRD->Meta() );
if (crdOut->CoordsSetup( originalSetup.Top(), originalSetup.CoordInfo() ))
return CpptrajState::ERR;
DataSet::SizeArray mfArray(1, frameCount.TotalReadFrames());
if (crdOut->Allocate( mfArray )) return CpptrajState::ERR;
}
// Loop over all frames in COORDS.
ProgressBar* progress = 0;
if (State.ShowProgress())
progress = new ProgressBar( frameCount.TotalReadFrames() );
int set = 0;
for (int frame = frameCount.Start(); frame < frameCount.Stop();
frame += frameCount.Offset(), ++set)
{
// Since Frame can be modified by actions, save original and use currentFrame
ActionFrame frm( &originalFrame, set );
if (progress != 0) progress->Update( set );
CRD->GetFrame( frame, originalFrame );
Action::RetType ret = act->DoAction( set, frm );
if (ret == Action::ERR) {
mprinterr("Error: crdaction: Frame %i, set %i\n", frame + 1, set + 1);
break;
}
// Check if frame was modified. If so, update COORDS.
if ( ret == Action::MODIFY_COORDS ) {
if (crdOut != 0)
crdOut->AddFrame( frm.Frm() );
else
CRD->SetCRD( frame, frm.Frm() );
}
}
if (progress != 0) delete progress;
# ifdef MPI
act->SyncAction();
# endif
// If topology was modified, replace old set with new.
if ( setup_ret == Action::MODIFY_TOPOLOGY ) {
mprintf("Info: crdaction: Topology for '%s' was modified by action '%s'\n",
CRD->legend(), actionargs.Command());
State.DSL().RemoveSet( CRD );
State.DSL().AddSet( crdOut );
}
act->Print();
State.MasterDataFileWrite();
total_time.Stop();
mprintf("TIME: Total action execution time: %.4f seconds.\n", total_time.Total());
return CpptrajState::OK;
}
// Exec_RotateDihedral::Execute()
Exec::RetType Exec_RotateDihedral::Execute(CpptrajState& State, ArgList& argIn) {
// Get input COORDS set
std::string setname = argIn.GetStringKey("crdset");
if (setname.empty()) {
mprinterr("Error: Specify COORDS dataset name with 'crdset'.\n");
return CpptrajState::ERR;
}
DataSet_Coords* CRD = (DataSet_Coords*)State.DSL().FindCoordsSet( setname );
if (CRD == 0) {
mprinterr("Error: Could not find COORDS set '%s'\n", setname.c_str());
return CpptrajState::ERR;
}
if (CRD->Size() < 1) {
mprinterr("Error: COORDS set is empty.\n");
return CpptrajState::ERR;
}
int frame = argIn.getKeyInt("frame", 0);
if (frame < 0 || frame >= (int)CRD->Size()) {
mprinterr("Error: Specified frame %i is out of range.\n", frame+1);
return CpptrajState::ERR;
}
mprintf(" ROTATEDIHEDRAL: Using COORDS '%s', frame %i\n", CRD->legend(), frame+1);
// Get target frame
Frame FRM = CRD->AllocateFrame();
CRD->GetFrame(frame, FRM);
// Save as reference
Frame refFrame = FRM;
// Create output COORDS set if necessary
DataSet_Coords* OUT = 0;
int outframe = 0;
std::string outname = argIn.GetStringKey("name");
if (outname.empty()) {
// This will not work for TRAJ data sets
if (CRD->Type() == DataSet::TRAJ) {
mprinterr("Error: Using TRAJ as input set requires use of 'name' keyword for output.\n");
return CpptrajState::ERR;
}
OUT = CRD;
outframe = frame;
} else {
// Create new output set with 1 empty frame.
OUT = (DataSet_Coords*)State.DSL().AddSet( DataSet::COORDS, outname );
if (OUT == 0) return CpptrajState::ERR;
OUT->Allocate( DataSet::SizeArray(1, 1) );
OUT->CoordsSetup( CRD->Top(), CRD->CoordsInfo() );
OUT->AddFrame( CRD->AllocateFrame() );
mprintf("\tOutput to set '%s'\n", OUT->legend());
}
// Determine whether we are setting or incrementing.
enum ModeType { SET = 0, INCREMENT };
ModeType mode = SET;
if (argIn.Contains("value"))
mode = SET;
else if (argIn.Contains("increment"))
mode = INCREMENT;
else {
mprinterr("Error: Specify 'value <value>' or 'increment <increment>'\n");
return CpptrajState::ERR;
}
double value = argIn.getKeyDouble(ModeStr[mode], 0.0);
switch (mode) {
case SET: mprintf("\tDihedral will be set to %g degrees.\n", value); break;
case INCREMENT: mprintf("\tDihedral will be incremented by %g degrees.\n", value); break;
}
// Convert to radians
value *= Constants::DEGRAD;
// Select dihedral atoms
int A1, A2, A3, A4;
if (argIn.Contains("type")) {
// By type
ArgList typeArg = argIn.GetStringKey("type");
if (typeArg.empty()) {
mprinterr("Error: No dihedral type specified after 'type'\n");
return CpptrajState::ERR;
}
DihedralSearch dihSearch;
dihSearch.SearchForArgs( typeArg );
if (dihSearch.NoDihedralTokens()) {
mprinterr("Error: Specified dihedral type not recognized.\n");
return CpptrajState::ERR;
}
// Get residue
int res = argIn.getKeyInt("res", -1);
if (res <= 0) {
mprinterr("Error: If 'type' specified 'res' must be specified and > 0.\n");
return CpptrajState::ERR;
}
// Search for dihedrals. User residue #s start from 1.
if (dihSearch.FindDihedrals(CRD->Top(), Range(res-1)))
return CpptrajState::ERR;
DihedralSearch::mask_it dih = dihSearch.begin();
A1 = dih->A0();
A2 = dih->A1();
A3 = dih->A2();
A4 = dih->A3();
} else {
// By masks
AtomMask m1( argIn.GetMaskNext() );
AtomMask m2( argIn.GetMaskNext() );
AtomMask m3( argIn.GetMaskNext() );
AtomMask m4( argIn.GetMaskNext() );
if (CRD->Top().SetupIntegerMask( m1 )) return CpptrajState::ERR;
if (CRD->Top().SetupIntegerMask( m2 )) return CpptrajState::ERR;
if (CRD->Top().SetupIntegerMask( m3 )) return CpptrajState::ERR;
if (CRD->Top().SetupIntegerMask( m4 )) return CpptrajState::ERR;
if (m1.Nselected() != 1) return MaskError( m1 );
if (m2.Nselected() != 1) return MaskError( m2 );
if (m3.Nselected() != 1) return MaskError( m3 );
if (m4.Nselected() != 1) return MaskError( m4 );
A1 = m1[0];
A2 = m2[0];
A3 = m3[0];
A4 = m4[0];
}
mprintf("\tRotating dihedral defined by atoms '%s'-'%s'-'%s'-'%s'\n",
CRD->Top().AtomMaskName(A1).c_str(),
CRD->Top().AtomMaskName(A2).c_str(),
CRD->Top().AtomMaskName(A3).c_str(),
CRD->Top().AtomMaskName(A4).c_str());
// Set mask of atoms that will move during dihedral rotation
AtomMask Rmask = DihedralSearch::MovingAtoms(CRD->Top(), A2, A3);
// Calculate current value of dihedral
double torsion = Torsion( FRM.XYZ(A1), FRM.XYZ(A2), FRM.XYZ(A3), FRM.XYZ(A4) );
// Calculate delta needed to get to target value.
double delta;
switch (mode) {
case SET: delta = value - torsion; break;
case INCREMENT: delta = value; break;
}
mprintf("\tOriginal torsion is %g, rotating by %g degrees.\n",
torsion*Constants::RADDEG, delta*Constants::RADDEG);
// Set axis of rotation
Vec3 axisOfRotation = FRM.SetAxisOfRotation( A2, A3 );
// Calculate rotation matrix for delta.
Matrix_3x3 rotationMatrix;
rotationMatrix.CalcRotationMatrix(axisOfRotation, delta);
// Rotate around axis
FRM.Rotate(rotationMatrix, Rmask);
// RMS-fit the non-moving part of the coords back on original
AtomMask refMask = Rmask;
refMask.InvertMask();
FRM.Align( refFrame, refMask );
// Update coords
OUT->SetCRD( outframe, FRM );
return CpptrajState::OK;
}