void UAnimSequenceBase::VerifyCurveNames(USkeleton* Skeleton, const FName& NameContainer, TArray<DataType>& CurveList)
{
FSmartNameMapping* NameMapping = Skeleton->SmartNames.GetContainer(NameContainer);
// since this is verify function that makes sure it exists after loaded
// we should add it if it doesn't exist
if (!NameMapping)
{
// if it doens't exists, we should add it
Skeleton->Modify(true);
Skeleton->SmartNames.AddContainer(NameContainer);
NameMapping = Skeleton->SmartNames.GetContainer(NameContainer);
check(NameMapping);
}
TArray<DataType*> UnlinkedCurves;
for(DataType& Curve : CurveList)
{
if(!NameMapping->Exists(Curve.LastObservedName))
{
// The skeleton doesn't know our name. Use the last observed name that was saved with the
// curve to create a new name. This can happen if a user saves an animation but not a skeleton
// either when updating the assets or editing the curves within.
UnlinkedCurves.Add(&Curve);
}
}
for(DataType* Curve : UnlinkedCurves)
{
NameMapping->AddOrFindName(Curve->LastObservedName, Curve->CurveUid);
}
}
/**
* Since we don't care about blending, we just change this decoration to OutCurves
* @TODO : Fix this if we're saving vectorcurves and blending
*/
void FRawCurveTracks::EvaluateTransformCurveData(USkeleton * Skeleton, TMap<FName, FTransform>&OutCurves, float CurrentTime, float BlendWeight) const
{
check (Skeleton);
// evaluate the curve data at the CurrentTime and add to Instance
for(auto CurveIter = TransformCurves.CreateConstIterator(); CurveIter; ++CurveIter)
{
const FTransformCurve& Curve = *CurveIter;
// if disabled, do not handle
if (Curve.GetCurveTypeFlag(ACF_Disabled))
{
continue;
}
FSmartNameMapping* NameMapping = Skeleton->SmartNames.GetContainer(USkeleton::AnimTrackCurveMappingName);
// Add or retrieve curve
FName CurveName;
// make sure it was added
if (ensure (NameMapping->GetName(Curve.CurveUid, CurveName)))
{
// note we're not checking Curve.GetCurveTypeFlags() yet
FTransform & Value = OutCurves.FindOrAdd(CurveName);
Value = Curve.Evaluate(CurrentTime, BlendWeight);
}
}
}
void USkeleton::RemoveSmartnameAndModify(FName ContainerName, FSmartNameMapping::UID Uid)
{
FSmartNameMapping* RequestedMapping = SmartNames.GetContainer(ContainerName);
if(RequestedMapping)
{
if(RequestedMapping->Exists(Uid))
{
Modify();
RequestedMapping->Remove(Uid);
}
}
}
void UAnimPreviewInstance::RefreshCurveBoneControllers()
{
// go through all curves and see if it has Transform Curve
// if so, find what bone that belong to and create BoneMOdifier for them
UAnimSequence* CurrentSequence = Cast<UAnimSequence>(CurrentAsset);
CurveBoneControllers.Empty();
// do not apply if BakedAnimation is on
if(CurrentSequence)
{
// make sure if this needs source update
if ( !CurrentSequence->DoesContainTransformCurves() )
{
return;
}
RequiredBones.SetUseSourceData(true);
TArray<FTransformCurve>& Curves = CurrentSequence->RawCurveData.TransformCurves;
FSmartNameMapping* NameMapping = CurrentSkeleton->SmartNames.GetContainer(USkeleton::AnimTrackCurveMappingName);
for (auto& Curve : Curves)
{
// skip if disabled
if (Curve.GetCurveTypeFlag(ACF_Disabled))
{
continue;
}
// add bone modifier
FName CurveName;
NameMapping->GetName(Curve.CurveUid, CurveName);
// @TODO: this is going to be issue. If they don't save skeleton with it, we don't have name at all?
if (CurveName == NAME_None)
{
FSmartNameMapping::UID NewUID;
NameMapping->AddOrFindName(Curve.LastObservedName, NewUID);
Curve.CurveUid = NewUID;
CurveName = Curve.LastObservedName;
}
FName BoneName = CurveName;
if (BoneName != NAME_None && CurrentSkeleton->GetReferenceSkeleton().FindBoneIndex(BoneName) != INDEX_NONE)
{
ModifyBone(BoneName, true);
}
}
}
}
void UAnimSequenceBase::PostLoad()
{
Super::PostLoad();
// Convert Notifies to new data
if( GIsEditor && Notifies.Num() > 0 )
{
if(GetLinkerUE4Version() < VER_UE4_CLEAR_NOTIFY_TRIGGERS)
{
for(FAnimNotifyEvent Notify : Notifies)
{
if(Notify.Notify)
{
// Clear end triggers for notifies that are not notify states
Notify.EndTriggerTimeOffset = 0.0f;
}
}
}
}
// Ensure notifies are sorted.
SortNotifies();
#if WITH_EDITOR
InitializeNotifyTrack();
UpdateAnimNotifyTrackCache();
#endif
if(USkeleton* Skeleton = GetSkeleton())
{
// Fix up the existing curves to work with smartnames
if(GetLinkerUE4Version() < VER_UE4_SKELETON_ADD_SMARTNAMES)
{
// Get the name mapping object for curves
FSmartNameMapping* NameMapping = Skeleton->SmartNames.GetContainer(USkeleton::AnimCurveMappingName);
for(FFloatCurve& Curve : RawCurveData.FloatCurves)
{
// Add the names of the curves into the smartname mapping and store off the curve uid which will be saved next time the sequence saves.
NameMapping->AddOrFindName(Curve.LastObservedName, Curve.CurveUid);
}
}
else
{
VerifyCurveNames<FFloatCurve>(Skeleton, USkeleton::AnimCurveMappingName, RawCurveData.FloatCurves);
}
#if WITH_EDITOR
VerifyCurveNames<FTransformCurve>(Skeleton, USkeleton::AnimTrackCurveMappingName, RawCurveData.TransformCurves);
#endif
}
}
bool USkeleton::AddSmartnameAndModify(FName ContainerName, FName NewName, FSmartNameMapping::UID& NewUid)
{
bool Successful = false;
FSmartNameMapping* RequestedMapping = SmartNames.GetContainer(ContainerName);
if(RequestedMapping)
{
if(RequestedMapping->AddName(NewName, NewUid))
{
Modify(true);
Successful = true;
}
}
return Successful;
}
bool USkeleton::RenameSmartnameAndModify(FName ContainerName, FSmartNameMapping::UID Uid, FName NewName)
{
bool Successful = false;
FSmartNameMapping* RequestedMapping = SmartNames.GetContainer(ContainerName);
if(RequestedMapping)
{
FName CurrentName;
RequestedMapping->GetName(Uid, CurrentName);
if(CurrentName != NewName)
{
Modify();
Successful = RequestedMapping->Rename(Uid, NewName);
}
}
return Successful;
}
/** Called to get the name of a curve back from the animation skeleton */
virtual FText GetCurveName(USkeleton::AnimCurveUID Uid) const
{
if(BaseSequence.IsValid())
{
FSmartNameMapping* NameMapping = BaseSequence.Get()->GetSkeleton()->SmartNames.GetContainer(USkeleton::AnimCurveMappingName);
if(NameMapping)
{
FName CurveName;
if(NameMapping->GetName(Uid, CurveName))
{
return FText::FromName(CurveName);
}
}
}
return FText::GetEmpty();
}
/** Called to get the name of a curve back from the animation skeleton */
virtual FText GetCurveName(USkeleton::AnimCurveUID Uid) const
{
if(BaseSequence.IsValid())
{
FSmartNameMapping* NameMapping = BaseSequence.Get()->GetSkeleton()->SmartNames.GetContainer(USkeleton::AnimTrackCurveMappingName);
if(NameMapping)
{
FName CurveName;
if(NameMapping->GetName(Uid, CurveName))
{
FName DisplayName = CurveName;
return FText::FromString(FString::Printf(TEXT("%s(%c)"), *DisplayName.ToString(), GetCurveTypeCharacter()));
}
}
}
return FText::GetEmpty();
}
bool UnFbx::FFbxImporter::ImportCurveToAnimSequence(class UAnimSequence * TargetSequence, const FString& CurveName, const FbxAnimCurve* FbxCurve, int32 CurveFlags,const FbxTimeSpan AnimTimeSpan, const float ValueScale/*=1.f*/) const
{
if (TargetSequence && FbxCurve)
{
FName Name = *CurveName;
USkeleton* Skeleton = TargetSequence->GetSkeleton();
FSmartNameMapping* NameMapping = Skeleton->SmartNames.GetContainer(USkeleton::AnimCurveMappingName);
// Add or retrieve curve
USkeleton::AnimCurveUID Uid;
if (!NameMapping->Exists(Name))
{
// mark skeleton dirty
Skeleton->Modify();
}
NameMapping->AddOrFindName(Name, Uid);
FFloatCurve * CurveToImport = static_cast<FFloatCurve *>(TargetSequence->RawCurveData.GetCurveData(Uid, FRawCurveTracks::FloatType));
if(CurveToImport==NULL)
{
if(TargetSequence->RawCurveData.AddCurveData(Uid, CurveFlags))
{
CurveToImport = static_cast<FFloatCurve *> (TargetSequence->RawCurveData.GetCurveData(Uid, FRawCurveTracks::FloatType));
}
else
{
// this should not happen, we already checked before adding
ensureMsgf(0, TEXT("FBX Import: Critical error: no memory?"));
}
}
else
{
CurveToImport->FloatCurve.Reset();
}
return ImportCurve(FbxCurve, CurveToImport, AnimTimeSpan, ValueScale);
}
return false;
}
void UAnimSequenceBase::VerifyCurveNames(USkeleton* Skeleton, const FName& NameContainer, TArray<DataType>& CurveList)
{
FSmartNameMapping* NameMapping = Skeleton->SmartNames.GetContainer(NameContainer);
// since this is verify function that makes sure it exists after loaded
// we should add it if it doesn't exist
if (!NameMapping)
{
// if it doens't exists, we should add it
Skeleton->Modify(true);
Skeleton->SmartNames.AddContainer(NameContainer);
NameMapping = Skeleton->SmartNames.GetContainer(NameContainer);
check(NameMapping);
}
TArray<DataType*> UnlinkedCurves;
for(DataType& Curve : CurveList)
{
const FSmartNameMapping::UID* UID = NameMapping->FindUID(Curve.LastObservedName);
if(!UID)
{
// The skeleton doesn't know our name. Use the last observed name that was saved with the
// curve to create a new name. This can happen if a user saves an animation but not a skeleton
// either when updating the assets or editing the curves within.
UnlinkedCurves.Add(&Curve);
}
else if (Curve.CurveUid != *UID)// we verify if UID is correct
{
// if UID doesn't match, this is suspicious
// because same name but different UID is not idea
// so we'll fix up UID
Curve.CurveUid = *UID;
}
}
for(DataType* Curve : UnlinkedCurves)
{
NameMapping->AddOrFindName(Curve->LastObservedName, Curve->CurveUid);
}
}
