GrTextContext::GrTextContext(GrContext* context, const GrPaint& paint) : fPaint(paint) {
fContext = context;
fStrike = NULL;
fCurrTexture = NULL;
fCurrVertex = 0;
const GrClipData* clipData = context->getClip();
GrRect devConservativeBound;
clipData->fClipStack->getConservativeBounds(
-clipData->fOrigin.fX,
-clipData->fOrigin.fY,
context->getRenderTarget()->width(),
context->getRenderTarget()->height(),
&devConservativeBound);
devConservativeBound.roundOut(&fClipRect);
fAutoMatrix.setIdentity(fContext, &fPaint);
fDrawTarget = NULL;
fVertices = NULL;
fMaxVertices = 0;
fVertexLayout =
GrDrawTarget::kTextFormat_VertexLayoutBit |
GrDrawTarget::StageTexCoordVertexLayoutBit(kGlyphMaskStage, 0);
}
/**
* getConservativeBounds returns the conservative bounding box of the clip
* in device (as opposed to canvas) coordinates. If the bounding box is
* the result of purely intersections of rects (with an initial replace)
* isIntersectionOfRects will be set to true.
*/
void GrClipData::getConservativeBounds(const GrSurface* surface,
GrIRect* devResult,
bool* isIntersectionOfRects) const {
GrRect devBounds;
fClipStack->getConservativeBounds(-fOrigin.fX,
-fOrigin.fY,
surface->width(),
surface->height(),
&devBounds,
isIntersectionOfRects);
devBounds.roundOut(devResult);
}
void GrClip::setFromRect(const GrRect& r) {
fList.reset();
if (r.isEmpty()) {
// use a canonical empty rect for == testing.
setEmpty();
} else {
fList.push_back();
fList.back().fRect = r;
fList.back().fType = kRect_ClipType;
fConservativeBounds = r;
fConservativeBoundsValid = true;
}
}
////////////////////////////////////////////////////////////////////////////////
// Shared preamble between gpu and SW-only AA clip mask creation paths.
// Handles caching, determination of clip mask bound & allocation (if needed)
// of the result texture
// Returns true if there is no more work to be done (i.e., we got a cache hit)
bool GrClipMaskManager::clipMaskPreamble(GrGpu* gpu,
const GrClip& clipIn,
GrTexture** result,
GrIRect *resultBounds) {
GrDrawState* origDrawState = gpu->drawState();
GrAssert(origDrawState->isClipState());
GrRenderTarget* rt = origDrawState->getRenderTarget();
GrAssert(NULL != rt);
GrRect rtRect;
rtRect.setLTRB(0, 0,
GrIntToScalar(rt->width()), GrIntToScalar(rt->height()));
// unlike the stencil path the alpha path is not bound to the size of the
// render target - determine the minimum size required for the mask
GrRect bounds;
if (clipIn.hasConservativeBounds()) {
bounds = clipIn.getConservativeBounds();
if (!bounds.intersect(rtRect)) {
// the mask will be empty in this case
GrAssert(false);
bounds.setEmpty();
}
} else {
// still locked to the size of the render target
bounds = rtRect;
}
GrIRect intBounds;
bounds.roundOut(&intBounds);
// need to outset a pixel since the standard bounding box computation
// path doesn't leave any room for antialiasing (esp. w.r.t. rects)
intBounds.outset(1, 1);
// TODO: make sure we don't outset if bounds are still 0,0 @ min
if (fAACache.canReuse(clipIn,
intBounds.width(),
intBounds.height())) {
*result = fAACache.getLastMask();
fAACache.getLastBound(resultBounds);
return true;
}
this->setupCache(clipIn, intBounds);
*resultBounds = intBounds;
return false;
}
////////////////////////////////////////////////////////////////////////////////
// sort out what kind of clip mask needs to be created: alpha, stencil,
// scissor, or entirely software
bool GrClipMaskManager::createClipMask(GrGpu* gpu,
const GrClip& clipIn,
ScissoringSettings* scissorSettings) {
GrAssert(scissorSettings);
scissorSettings->fEnableScissoring = false;
fClipMaskInStencil = false;
fClipMaskInAlpha = false;
GrDrawState* drawState = gpu->drawState();
if (!drawState->isClipState()) {
return true;
}
GrRenderTarget* rt = drawState->getRenderTarget();
// GrDrawTarget should have filtered this for us
GrAssert(NULL != rt);
#if GR_SW_CLIP
if (create_mask_in_sw()) {
// The clip geometry is complex enough that it will be more
// efficient to create it entirely in software
GrTexture* result = NULL;
GrIRect bound;
if (this->createSoftwareClipMask(gpu, clipIn, &result, &bound)) {
fClipMaskInAlpha = true;
setup_drawstate_aaclip(gpu, result, bound);
return true;
}
}
#endif
#if GR_AA_CLIP
// If MSAA is enabled use the (faster) stencil path for AA clipping
// otherwise the alpha clip mask is our only option
if (clipIn.requiresAA() && 0 == rt->numSamples()) {
// Since we are going to create a destination texture of the correct
// size for the mask (rather than being bound by the size of the
// render target) we aren't going to use scissoring like the stencil
// path does (see scissorSettings below)
GrTexture* result = NULL;
GrIRect bound;
if (this->createAlphaClipMask(gpu, clipIn, &result, &bound)) {
fClipMaskInAlpha = true;
setup_drawstate_aaclip(gpu, result, bound);
return true;
}
// if alpha clip mask creation fails fall through to the stencil
// buffer method
}
#endif // GR_AA_CLIP
GrRect bounds;
GrRect rtRect;
rtRect.setLTRB(0, 0,
GrIntToScalar(rt->width()), GrIntToScalar(rt->height()));
if (clipIn.hasConservativeBounds()) {
bounds = clipIn.getConservativeBounds();
if (!bounds.intersect(rtRect)) {
bounds.setEmpty();
}
} else {
bounds = rtRect;
}
bounds.roundOut(&scissorSettings->fScissorRect);
if (scissorSettings->fScissorRect.isEmpty()) {
scissorSettings->fScissorRect.setLTRB(0,0,0,0);
// TODO: I think we can do an early exit here - after refactoring try:
// set fEnableScissoring to true but leave fClipMaskInStencil false
// and return - everything is going to be scissored away anyway!
}
scissorSettings->fEnableScissoring = true;
// use the stencil clip if we can't represent the clip as a rectangle.
fClipMaskInStencil = !clipIn.isRect() && !clipIn.isEmpty() &&
!bounds.isEmpty();
if (fClipMaskInStencil) {
return this->createStencilClipMask(gpu, clipIn, bounds, scissorSettings);
}
return true;
}
bool GrAAHairLinePathRenderer::createGeom(GrDrawTarget::StageBitfield stages) {
int rtHeight = fTarget->getRenderTarget()->height();
GrIRect clip;
if (fTarget->getClip().hasConservativeBounds()) {
GrRect clipRect = fTarget->getClip().getConservativeBounds();
clipRect.roundOut(&clip);
} else {
clip.setLargest();
}
// If none of the inputs that affect generation of path geometry have
// have changed since last previous path draw then we can reuse the
// previous geoemtry.
if (stages == fPreviousStages &&
fPreviousViewMatrix == fTarget->getViewMatrix() &&
fPreviousTranslate == fTranslate &&
rtHeight == fPreviousRTHeight &&
fClipRect == clip) {
return true;
}
GrVertexLayout layout = GrDrawTarget::kEdge_VertexLayoutBit;
for (int s = 0; s < GrDrawState::kNumStages; ++s) {
if ((1 << s) & stages) {
layout |= GrDrawTarget::StagePosAsTexCoordVertexLayoutBit(s);
}
}
GrMatrix viewM = fTarget->getViewMatrix();
PREALLOC_PTARRAY(128) lines;
PREALLOC_PTARRAY(128) quads;
IntArray qSubdivs;
fQuadCnt = generate_lines_and_quads(*fPath, viewM, fTranslate, clip,
&lines, &quads, &qSubdivs);
fLineSegmentCnt = lines.count() / 2;
int vertCnt = kVertsPerLineSeg * fLineSegmentCnt + kVertsPerQuad * fQuadCnt;
GrAssert(sizeof(Vertex) == GrDrawTarget::VertexSize(layout));
Vertex* verts;
if (!fTarget->reserveVertexSpace(layout, vertCnt, (void**)&verts)) {
return false;
}
Vertex* base = verts;
const GrMatrix* toDevice = NULL;
const GrMatrix* toSrc = NULL;
GrMatrix ivm;
if (viewM.hasPerspective()) {
if (viewM.invert(&ivm)) {
toDevice = &viewM;
toSrc = &ivm;
}
}
for (int i = 0; i < fLineSegmentCnt; ++i) {
add_line(&lines[2*i], rtHeight, toSrc, &verts);
}
int unsubdivQuadCnt = quads.count() / 3;
for (int i = 0; i < unsubdivQuadCnt; ++i) {
GrAssert(qSubdivs[i] >= 0);
add_quads(&quads[3*i], qSubdivs[i], toDevice, toSrc, &verts);
}
fPreviousStages = stages;
fPreviousViewMatrix = fTarget->getViewMatrix();
fPreviousRTHeight = rtHeight;
fClipRect = clip;
fPreviousTranslate = fTranslate;
return true;
}
bool GrAAHairLinePathRenderer::createGeom(
const SkPath& path,
const GrVec* translate,
GrDrawTarget* target,
GrDrawState::StageMask stageMask,
int* lineCnt,
int* quadCnt,
GrDrawTarget::AutoReleaseGeometry* arg) {
const GrDrawState& drawState = target->getDrawState();
int rtHeight = drawState.getRenderTarget()->height();
GrIRect clip;
if (target->getClip().hasConservativeBounds()) {
GrRect clipRect = target->getClip().getConservativeBounds();
clipRect.roundOut(&clip);
} else {
clip.setLargest();
}
GrVertexLayout layout = GrDrawTarget::kEdge_VertexLayoutBit;
GrMatrix viewM = drawState.getViewMatrix();
PREALLOC_PTARRAY(128) lines;
PREALLOC_PTARRAY(128) quads;
IntArray qSubdivs;
static const GrVec gZeroVec = {0, 0};
if (NULL == translate) {
translate = &gZeroVec;
}
*quadCnt = generate_lines_and_quads(path, viewM, *translate, clip,
&lines, &quads, &qSubdivs);
*lineCnt = lines.count() / 2;
int vertCnt = kVertsPerLineSeg * *lineCnt + kVertsPerQuad * *quadCnt;
GrAssert(sizeof(Vertex) == GrDrawTarget::VertexSize(layout));
if (!arg->set(target, layout, vertCnt, 0)) {
return false;
}
Vertex* verts = reinterpret_cast<Vertex*>(arg->vertices());
const GrMatrix* toDevice = NULL;
const GrMatrix* toSrc = NULL;
GrMatrix ivm;
if (viewM.hasPerspective()) {
if (viewM.invert(&ivm)) {
toDevice = &viewM;
toSrc = &ivm;
}
}
for (int i = 0; i < *lineCnt; ++i) {
add_line(&lines[2*i], rtHeight, toSrc, &verts);
}
int unsubdivQuadCnt = quads.count() / 3;
for (int i = 0; i < unsubdivQuadCnt; ++i) {
GrAssert(qSubdivs[i] >= 0);
add_quads(&quads[3*i], qSubdivs[i], toDevice, toSrc, &verts);
}
return true;
}
bool GrGpu::setupClipAndFlushState(GrPrimitiveType type) {
const GrIRect* r = NULL;
GrIRect clipRect;
GrDrawState* drawState = this->drawState();
const GrRenderTarget* rt = drawState->getRenderTarget();
// GrDrawTarget should have filtered this for us
GrAssert(NULL != rt);
if (drawState->isClipState()) {
GrRect bounds;
GrRect rtRect;
rtRect.setLTRB(0, 0,
GrIntToScalar(rt->width()), GrIntToScalar(rt->height()));
if (fClip.hasConservativeBounds()) {
bounds = fClip.getConservativeBounds();
if (!bounds.intersect(rtRect)) {
bounds.setEmpty();
}
} else {
bounds = rtRect;
}
bounds.roundOut(&clipRect);
if (clipRect.isEmpty()) {
clipRect.setLTRB(0,0,0,0);
}
r = &clipRect;
// use the stencil clip if we can't represent the clip as a rectangle.
fClipInStencil = !fClip.isRect() && !fClip.isEmpty() &&
!bounds.isEmpty();
// TODO: dynamically attach a SB when needed.
GrStencilBuffer* stencilBuffer = rt->getStencilBuffer();
if (fClipInStencil && NULL == stencilBuffer) {
return false;
}
if (fClipInStencil &&
stencilBuffer->mustRenderClip(fClip, rt->width(), rt->height())) {
stencilBuffer->setLastClip(fClip, rt->width(), rt->height());
// we set the current clip to the bounds so that our recursive
// draws are scissored to them. We use the copy of the complex clip
// we just stashed on the SB to render from. We set it back after
// we finish drawing it into the stencil.
const GrClip& clip = stencilBuffer->getLastClip();
fClip.setFromRect(bounds);
AutoStateRestore asr(this);
AutoGeometryPush agp(this);
drawState->setViewMatrix(GrMatrix::I());
this->flushScissor(NULL);
#if !VISUALIZE_COMPLEX_CLIP
drawState->enableState(GrDrawState::kNoColorWrites_StateBit);
#else
drawState->disableState(GrDrawState::kNoColorWrites_StateBit);
#endif
int count = clip.getElementCount();
int clipBit = stencilBuffer->bits();
SkASSERT((clipBit <= 16) &&
"Ganesh only handles 16b or smaller stencil buffers");
clipBit = (1 << (clipBit-1));
bool clearToInside;
GrSetOp startOp = kReplace_SetOp; // suppress warning
int start = process_initial_clip_elements(clip,
rtRect,
&clearToInside,
&startOp);
this->clearStencilClip(clipRect, clearToInside);
// walk through each clip element and perform its set op
// with the existing clip.
for (int c = start; c < count; ++c) {
GrPathFill fill;
bool fillInverted;
// enabled at bottom of loop
drawState->disableState(kModifyStencilClip_StateBit);
bool canRenderDirectToStencil; // can the clip element be drawn
// directly to the stencil buffer
// with a non-inverted fill rule
// without extra passes to
// resolve in/out status.
GrPathRenderer* pr = NULL;
const GrPath* clipPath = NULL;
GrPathRenderer::AutoClearPath arp;
if (kRect_ClipType == clip.getElementType(c)) {
canRenderDirectToStencil = true;
fill = kEvenOdd_PathFill;
fillInverted = false;
// there is no point in intersecting a screen filling
// rectangle.
if (kIntersect_SetOp == clip.getOp(c) &&
clip.getRect(c).contains(rtRect)) {
continue;
}
} else {
fill = clip.getPathFill(c);
fillInverted = GrIsFillInverted(fill);
fill = GrNonInvertedFill(fill);
clipPath = &clip.getPath(c);
pr = this->getClipPathRenderer(*clipPath, fill);
if (NULL == pr) {
fClipInStencil = false;
fClip = clip;
return false;
}
canRenderDirectToStencil =
!pr->requiresStencilPass(this, *clipPath, fill);
arp.set(pr, this, clipPath, fill, false, NULL);
}
GrSetOp op = (c == start) ? startOp : clip.getOp(c);
int passes;
GrStencilSettings stencilSettings[GrStencilSettings::kMaxStencilClipPasses];
bool canDrawDirectToClip; // Given the renderer, the element,
// fill rule, and set operation can
// we render the element directly to
// stencil bit used for clipping.
canDrawDirectToClip =
GrStencilSettings::GetClipPasses(op,
canRenderDirectToStencil,
clipBit,
fillInverted,
&passes, stencilSettings);
// draw the element to the client stencil bits if necessary
if (!canDrawDirectToClip) {
GR_STATIC_CONST_SAME_STENCIL(gDrawToStencil,
kIncClamp_StencilOp,
kIncClamp_StencilOp,
kAlways_StencilFunc,
0xffff,
0x0000,
0xffff);
SET_RANDOM_COLOR
if (kRect_ClipType == clip.getElementType(c)) {
*drawState->stencil() = gDrawToStencil;
this->drawSimpleRect(clip.getRect(c), NULL, 0);
} else {
if (canRenderDirectToStencil) {
*drawState->stencil() = gDrawToStencil;
pr->drawPath(0);
} else {
pr->drawPathToStencil();
}
}
}
// now we modify the clip bit by rendering either the clip
// element directly or a bounding rect of the entire clip.
drawState->enableState(kModifyStencilClip_StateBit);
for (int p = 0; p < passes; ++p) {
*drawState->stencil() = stencilSettings[p];
if (canDrawDirectToClip) {
if (kRect_ClipType == clip.getElementType(c)) {
SET_RANDOM_COLOR
this->drawSimpleRect(clip.getRect(c), NULL, 0);
} else {
SET_RANDOM_COLOR
pr->drawPath(0);
}
} else {
SET_RANDOM_COLOR
this->drawSimpleRect(bounds, NULL, 0);
}
}
}
////////////////////////////////////////////////////////////////////////////////
// Create a 1-bit clip mask in the stencil buffer. 'devClipBounds' are in device
// (as opposed to canvas) coordinates
bool GrClipMaskManager::createStencilClipMask(const GrClipData& clipDataIn,
const GrIRect& devClipBounds) {
GrAssert(kNone_ClipMaskType == fCurrClipMaskType);
GrDrawState* drawState = fGpu->drawState();
GrAssert(drawState->isClipState());
GrRenderTarget* rt = drawState->getRenderTarget();
GrAssert(NULL != rt);
// TODO: dynamically attach a SB when needed.
GrStencilBuffer* stencilBuffer = rt->getStencilBuffer();
if (NULL == stencilBuffer) {
return false;
}
if (stencilBuffer->mustRenderClip(clipDataIn, rt->width(), rt->height())) {
stencilBuffer->setLastClip(clipDataIn, rt->width(), rt->height());
// we set the current clip to the bounds so that our recursive
// draws are scissored to them. We use the copy of the complex clip
// we just stashed on the SB to render from. We set it back after
// we finish drawing it into the stencil.
const GrClipData* oldClipData = fGpu->getClip();
// The origin of 'newClipData' is (0, 0) so it is okay to place
// a device-coordinate bound in 'newClipStack'
SkClipStack newClipStack(devClipBounds);
GrClipData newClipData;
newClipData.fClipStack = &newClipStack;
fGpu->setClip(&newClipData);
GrDrawTarget::AutoStateRestore asr(fGpu, GrDrawTarget::kReset_ASRInit);
drawState = fGpu->drawState();
drawState->setRenderTarget(rt);
GrDrawTarget::AutoGeometryPush agp(fGpu);
if (0 != clipDataIn.fOrigin.fX || 0 != clipDataIn.fOrigin.fY) {
// Add the saveLayer's offset to the view matrix rather than
// offset each individual draw
drawState->viewMatrix()->setTranslate(
SkIntToScalar(-clipDataIn.fOrigin.fX),
SkIntToScalar(-clipDataIn.fOrigin.fY));
}
#if !VISUALIZE_COMPLEX_CLIP
drawState->enableState(GrDrawState::kNoColorWrites_StateBit);
#endif
int clipBit = stencilBuffer->bits();
SkASSERT((clipBit <= 16) &&
"Ganesh only handles 16b or smaller stencil buffers");
clipBit = (1 << (clipBit-1));
GrIRect devRTRect = GrIRect::MakeWH(rt->width(), rt->height());
bool clearToInside;
SkRegion::Op firstOp = SkRegion::kReplace_Op; // suppress warning
SkClipStack::Iter iter(*oldClipData->fClipStack,
SkClipStack::Iter::kBottom_IterStart);
const SkClipStack::Iter::Clip* clip = process_initial_clip_elements(&iter,
devRTRect,
&clearToInside,
&firstOp,
clipDataIn);
fGpu->clearStencilClip(devClipBounds, clearToInside);
bool first = true;
// walk through each clip element and perform its set op
// with the existing clip.
for ( ; NULL != clip; clip = iter.nextCombined()) {
GrPathFill fill;
bool fillInverted = false;
// enabled at bottom of loop
drawState->disableState(GrGpu::kModifyStencilClip_StateBit);
// if the target is MSAA then we want MSAA enabled when the clip is soft
if (rt->isMultisampled()) {
drawState->setState(GrDrawState::kHWAntialias_StateBit, clip->fDoAA);
}
// Can the clip element be drawn directly to the stencil buffer
// with a non-inverted fill rule without extra passes to
// resolve in/out status?
bool canRenderDirectToStencil = false;
SkRegion::Op op = clip->fOp;
if (first) {
first = false;
op = firstOp;
}
GrPathRenderer* pr = NULL;
const SkPath* clipPath = NULL;
if (NULL != clip->fRect) {
canRenderDirectToStencil = true;
fill = kEvenOdd_GrPathFill;
fillInverted = false;
// there is no point in intersecting a screen filling
// rectangle.
if (SkRegion::kIntersect_Op == op &&
contains(*clip->fRect, devRTRect, oldClipData->fOrigin)) {
continue;
}
} else {
GrAssert(NULL != clip->fPath);
fill = get_path_fill(*clip->fPath);
fillInverted = GrIsFillInverted(fill);
fill = GrNonInvertedFill(fill);
clipPath = clip->fPath;
pr = this->getContext()->getPathRenderer(*clipPath, fill, fGpu, false, true);
if (NULL == pr) {
fGpu->setClip(oldClipData);
return false;
}
canRenderDirectToStencil =
!pr->requiresStencilPass(*clipPath, fill, fGpu);
}
int passes;
GrStencilSettings stencilSettings[GrStencilSettings::kMaxStencilClipPasses];
bool canDrawDirectToClip; // Given the renderer, the element,
// fill rule, and set operation can
// we render the element directly to
// stencil bit used for clipping.
canDrawDirectToClip =
GrStencilSettings::GetClipPasses(op,
canRenderDirectToStencil,
clipBit,
fillInverted,
&passes,
stencilSettings);
// draw the element to the client stencil bits if necessary
if (!canDrawDirectToClip) {
GR_STATIC_CONST_SAME_STENCIL(gDrawToStencil,
kIncClamp_StencilOp,
kIncClamp_StencilOp,
kAlways_StencilFunc,
0xffff,
0x0000,
0xffff);
SET_RANDOM_COLOR
if (NULL != clip->fRect) {
*drawState->stencil() = gDrawToStencil;
fGpu->drawSimpleRect(*clip->fRect, NULL);
} else {
if (canRenderDirectToStencil) {
*drawState->stencil() = gDrawToStencil;
pr->drawPath(*clipPath, fill, fGpu, false);
} else {
pr->drawPathToStencil(*clipPath, fill, fGpu);
}
}
}
// now we modify the clip bit by rendering either the clip
// element directly or a bounding rect of the entire clip.
drawState->enableState(GrGpu::kModifyStencilClip_StateBit);
for (int p = 0; p < passes; ++p) {
*drawState->stencil() = stencilSettings[p];
if (canDrawDirectToClip) {
if (NULL != clip->fRect) {
SET_RANDOM_COLOR
fGpu->drawSimpleRect(*clip->fRect, NULL);
} else {
SET_RANDOM_COLOR
pr->drawPath(*clipPath, fill, fGpu, false);
}
} else {
SET_RANDOM_COLOR
// 'devClipBounds' is already in device coordinates so the
// translation in the view matrix is inappropriate.
// Convert it to canvas space so the drawn rect will
// be in the correct location
GrRect canvClipBounds;
canvClipBounds.set(devClipBounds);
device_to_canvas(&canvClipBounds, clipDataIn.fOrigin);
fGpu->drawSimpleRect(canvClipBounds, NULL);
}
}
}
void GrDefaultPathRenderer::onDrawPath(GrDrawTarget* target,
GrDrawTarget::StageBitfield stages,
const GrPath& path,
GrPathFill fill,
const GrPoint* translate,
bool stencilOnly) {
GrDrawTarget::AutoStateRestore asr(target);
bool colorWritesWereDisabled = target->isColorWriteDisabled();
// face culling doesn't make sense here
GrAssert(GrDrawTarget::kBoth_DrawFace == target->getDrawFace());
GrMatrix viewM = target->getViewMatrix();
// In order to tesselate the path we get a bound on how much the matrix can
// stretch when mapping to screen coordinates.
GrScalar stretch = viewM.getMaxStretch();
bool useStretch = stretch > 0;
GrScalar tol = fCurveTolerance;
if (!useStretch) {
// TODO: deal with perspective in some better way.
tol /= 10;
} else {
tol = GrScalarDiv(tol, stretch);
}
GrScalar tolSqd = GrMul(tol, tol);
int subpathCnt;
int maxPts = GrPathUtils::worstCasePointCount(path, &subpathCnt, tol);
GrVertexLayout layout = 0;
for (int s = 0; s < GrDrawTarget::kNumStages; ++s) {
if ((1 << s) & stages) {
layout |= GrDrawTarget::StagePosAsTexCoordVertexLayoutBit(s);
}
}
// add 4 to hold the bounding rect
GrDrawTarget::AutoReleaseGeometry arg(target, layout, maxPts + 4, 0);
GrPoint* base = (GrPoint*) arg.vertices();
GrPoint* vert = base;
GrPoint* subpathBase = base;
GrAutoSTMalloc<8, uint16_t> subpathVertCount(subpathCnt);
// TODO: use primitve restart if available rather than multiple draws
GrPrimitiveType type;
int passCount = 0;
const GrStencilSettings* passes[3];
GrDrawTarget::DrawFace drawFace[3];
bool reverse = false;
bool lastPassIsBounds;
if (kHairLine_PathFill == fill) {
type = kLineStrip_PrimitiveType;
passCount = 1;
if (stencilOnly) {
passes[0] = &gDirectToStencil;
} else {
passes[0] = NULL;
}
lastPassIsBounds = false;
drawFace[0] = GrDrawTarget::kBoth_DrawFace;
} else {
type = kTriangleFan_PrimitiveType;
if (single_pass_path(*target, path, fill)) {
passCount = 1;
if (stencilOnly) {
passes[0] = &gDirectToStencil;
} else {
passes[0] = NULL;
}
drawFace[0] = GrDrawTarget::kBoth_DrawFace;
lastPassIsBounds = false;
} else {
switch (fill) {
case kInverseEvenOdd_PathFill:
reverse = true;
// fallthrough
case kEvenOdd_PathFill:
passes[0] = &gEOStencilPass;
if (stencilOnly) {
passCount = 1;
lastPassIsBounds = false;
} else {
passCount = 2;
lastPassIsBounds = true;
if (reverse) {
passes[1] = &gInvEOColorPass;
} else {
passes[1] = &gEOColorPass;
}
}
drawFace[0] = drawFace[1] = GrDrawTarget::kBoth_DrawFace;
break;
case kInverseWinding_PathFill:
reverse = true;
// fallthrough
case kWinding_PathFill:
if (fSeparateStencil) {
if (fStencilWrapOps) {
passes[0] = &gWindStencilSeparateWithWrap;
} else {
passes[0] = &gWindStencilSeparateNoWrap;
}
passCount = 2;
drawFace[0] = GrDrawTarget::kBoth_DrawFace;
} else {
if (fStencilWrapOps) {
passes[0] = &gWindSingleStencilWithWrapInc;
passes[1] = &gWindSingleStencilWithWrapDec;
} else {
passes[0] = &gWindSingleStencilNoWrapInc;
passes[1] = &gWindSingleStencilNoWrapDec;
}
// which is cw and which is ccw is arbitrary.
drawFace[0] = GrDrawTarget::kCW_DrawFace;
drawFace[1] = GrDrawTarget::kCCW_DrawFace;
passCount = 3;
}
if (stencilOnly) {
lastPassIsBounds = false;
--passCount;
} else {
lastPassIsBounds = true;
drawFace[passCount-1] = GrDrawTarget::kBoth_DrawFace;
if (reverse) {
passes[passCount-1] = &gInvWindColorPass;
} else {
passes[passCount-1] = &gWindColorPass;
}
}
break;
default:
GrAssert(!"Unknown path fill!");
return;
}
}
}
GrPoint pts[4];
bool first = true;
int subpath = 0;
SkPath::Iter iter(path, false);
for (;;) {
GrPathCmd cmd = (GrPathCmd)iter.next(pts);
switch (cmd) {
case kMove_PathCmd:
if (!first) {
subpathVertCount[subpath] = vert-subpathBase;
subpathBase = vert;
++subpath;
}
*vert = pts[0];
vert++;
break;
case kLine_PathCmd:
*vert = pts[1];
vert++;
break;
case kQuadratic_PathCmd: {
GrPathUtils::generateQuadraticPoints(pts[0], pts[1], pts[2],
tolSqd, &vert,
GrPathUtils::quadraticPointCount(pts, tol));
break;
}
case kCubic_PathCmd: {
GrPathUtils::generateCubicPoints(pts[0], pts[1], pts[2], pts[3],
tolSqd, &vert,
GrPathUtils::cubicPointCount(pts, tol));
break;
}
case kClose_PathCmd:
break;
case kEnd_PathCmd:
subpathVertCount[subpath] = vert-subpathBase;
++subpath; // this could be only in debug
goto FINISHED;
}
first = false;
}
FINISHED:
GrAssert(subpath == subpathCnt);
GrAssert((vert - base) <= maxPts);
if (translate) {
int count = vert - base;
for (int i = 0; i < count; i++) {
base[i].offset(translate->fX, translate->fY);
}
}
// if we're stenciling we will follow with a pass that draws
// a bounding rect to set the color. We're stenciling when
// passCount > 1.
const int& boundVertexStart = maxPts;
GrPoint* boundsVerts = base + boundVertexStart;
if (lastPassIsBounds) {
GrRect bounds;
if (reverse) {
GrAssert(NULL != target->getRenderTarget());
// draw over the whole world.
bounds.setLTRB(0, 0,
GrIntToScalar(target->getRenderTarget()->width()),
GrIntToScalar(target->getRenderTarget()->height()));
GrMatrix vmi;
if (target->getViewInverse(&vmi)) {
vmi.mapRect(&bounds);
}
} else {
bounds.setBounds((GrPoint*)base, vert - base);
}
boundsVerts[0].setRectFan(bounds.fLeft, bounds.fTop, bounds.fRight,
bounds.fBottom);
}
for (int p = 0; p < passCount; ++p) {
target->setDrawFace(drawFace[p]);
if (NULL != passes[p]) {
target->setStencil(*passes[p]);
}
if (lastPassIsBounds && (p == passCount-1)) {
if (!colorWritesWereDisabled) {
target->disableState(GrDrawTarget::kNoColorWrites_StateBit);
}
target->drawNonIndexed(kTriangleFan_PrimitiveType,
boundVertexStart, 4);
} else {
if (passCount > 1) {
target->enableState(GrDrawTarget::kNoColorWrites_StateBit);
}
int baseVertex = 0;
for (int sp = 0; sp < subpathCnt; ++sp) {
target->drawNonIndexed(type,
baseVertex,
subpathVertCount[sp]);
baseVertex += subpathVertCount[sp];
}
}
}
}
void GrInOrderDrawBuffer::drawRect(const GrRect& rect,
const GrMatrix* matrix,
StageBitfield stageEnableBitfield,
const GrRect* srcRects[],
const GrMatrix* srcMatrices[]) {
GrAssert(!(NULL == fQuadIndexBuffer && fCurrQuad));
GrAssert(!(fDraws.empty() && fCurrQuad));
GrAssert(!(0 != fMaxQuads && NULL == fQuadIndexBuffer));
// if we have a quad IB then either append to the previous run of
// rects or start a new run
if (fMaxQuads) {
bool appendToPreviousDraw = false;
GrVertexLayout layout = GetRectVertexLayout(stageEnableBitfield, srcRects);
AutoReleaseGeometry geo(this, layout, 4, 0);
AutoViewMatrixRestore avmr(this);
GrMatrix combinedMatrix = this->getViewMatrix();
this->setViewMatrix(GrMatrix::I());
if (NULL != matrix) {
combinedMatrix.preConcat(*matrix);
}
SetRectVertices(rect, &combinedMatrix, srcRects, srcMatrices, layout, geo.vertices());
// we don't want to miss an opportunity to batch rects together
// simply because the clip has changed if the clip doesn't affect
// the rect.
bool disabledClip = false;
if (this->isClipState() && fClip.isRect()) {
GrRect clipRect = fClip.getRect(0);
// If the clip rect touches the edge of the viewport, extended it
// out (close) to infinity to avoid bogus intersections.
// We might consider a more exact clip to viewport if this
// conservative test fails.
const GrRenderTarget* target = this->getRenderTarget();
if (0 >= clipRect.fLeft) {
clipRect.fLeft = GR_ScalarMin;
}
if (target->width() <= clipRect.fRight) {
clipRect.fRight = GR_ScalarMax;
}
if (0 >= clipRect.top()) {
clipRect.fTop = GR_ScalarMin;
}
if (target->height() <= clipRect.fBottom) {
clipRect.fBottom = GR_ScalarMax;
}
int stride = VertexSize(layout);
bool insideClip = true;
for (int v = 0; v < 4; ++v) {
const GrPoint& p = *GetVertexPoint(geo.vertices(), v, stride);
if (!clipRect.contains(p)) {
insideClip = false;
break;
}
}
if (insideClip) {
this->disableState(kClip_StateBit);
disabledClip = true;
}
}
if (!needsNewClip() && !needsNewState() && fCurrQuad > 0 &&
fCurrQuad < fMaxQuads && layout == fLastRectVertexLayout) {
int vsize = VertexSize(layout);
Draw& lastDraw = fDraws.back();
GrAssert(lastDraw.fIndexBuffer == fQuadIndexBuffer);
GrAssert(kTriangles_PrimitiveType == lastDraw.fPrimitiveType);
GrAssert(0 == lastDraw.fVertexCount % 4);
GrAssert(0 == lastDraw.fIndexCount % 6);
GrAssert(0 == lastDraw.fStartIndex);
GeometryPoolState& poolState = fGeoPoolStateStack.back();
bool clearSinceLastDraw =
fClears.count() &&
fClears.back().fBeforeDrawIdx == fDraws.count();
appendToPreviousDraw =
!clearSinceLastDraw &&
lastDraw.fVertexBuffer == poolState.fPoolVertexBuffer &&
(fCurrQuad * 4 + lastDraw.fStartVertex) == poolState.fPoolStartVertex;
if (appendToPreviousDraw) {
lastDraw.fVertexCount += 4;
lastDraw.fIndexCount += 6;
fCurrQuad += 1;
// we reserved above, so we should be the first
// use of this vertex reserveation.
GrAssert(0 == poolState.fUsedPoolVertexBytes);
poolState.fUsedPoolVertexBytes = 4 * vsize;
}
}
if (!appendToPreviousDraw) {
this->setIndexSourceToBuffer(fQuadIndexBuffer);
drawIndexed(kTriangles_PrimitiveType, 0, 0, 4, 6);
fCurrQuad = 1;
fLastRectVertexLayout = layout;
}
if (disabledClip) {
this->enableState(kClip_StateBit);
}
} else {
INHERITED::drawRect(rect, matrix, stageEnableBitfield, srcRects, srcMatrices);
}
}
bool GrGpu::setupClipAndFlushState(GrPrimitiveType type) {
const GrIRect* r = NULL;
GrIRect clipRect;
// we check this early because we need a valid
// render target to setup stencil clipping
// before even going into flushGraphicsState
if (NULL == fCurrDrawState.fRenderTarget) {
GrAssert(!"No render target bound.");
return false;
}
if (fCurrDrawState.fFlagBits & kClip_StateBit) {
GrRenderTarget& rt = *fCurrDrawState.fRenderTarget;
GrRect bounds;
GrRect rtRect;
rtRect.setLTRB(0, 0,
GrIntToScalar(rt.width()), GrIntToScalar(rt.height()));
if (fClip.hasConservativeBounds()) {
bounds = fClip.getConservativeBounds();
bounds.intersectWith(rtRect);
} else {
bounds = rtRect;
}
bounds.roundOut(&clipRect);
if (clipRect.isEmpty()) {
clipRect.setLTRB(0,0,0,0);
}
r = &clipRect;
fClipState.fClipInStencil = !fClip.isRect() &&
!fClip.isEmpty() &&
!bounds.isEmpty();
if (fClipState.fClipInStencil &&
(fClipState.fClipIsDirty ||
fClip != rt.fLastStencilClip)) {
rt.fLastStencilClip = fClip;
// we set the current clip to the bounds so that our recursive
// draws are scissored to them. We use the copy of the complex clip
// in the rt to render
const GrClip& clip = rt.fLastStencilClip;
fClip.setFromRect(bounds);
AutoStateRestore asr(this);
AutoInternalDrawGeomRestore aidgr(this);
this->setViewMatrix(GrMatrix::I());
this->eraseStencilClip(clipRect);
this->flushScissor(NULL);
#if !VISUALIZE_COMPLEX_CLIP
this->enableState(kNoColorWrites_StateBit);
#else
this->disableState(kNoColorWrites_StateBit);
#endif
int count = clip.getElementCount();
int clipBit = rt.stencilBits();
clipBit = (1 << (clipBit-1));
// often we'll see the first two elements of the clip are
// the full rt size and another element intersected with it.
// We can skip the first full-size rect and save a big rect draw.
int firstElement = 0;
if (clip.getElementCount() > 1 &&
kRect_ClipType == clip.getElementType(0) &&
kIntersect_SetOp == clip.getOp(1)&&
clip.getRect(0).contains(bounds)) {
firstElement = 1;
}
// walk through each clip element and perform its set op
// with the existing clip.
for (int c = firstElement; c < count; ++c) {
GrPathFill fill;
// enabled at bottom of loop
this->disableState(kModifyStencilClip_StateBit);
bool canDrawDirectToClip;
if (kRect_ClipType == clip.getElementType(c)) {
canDrawDirectToClip = true;
fill = kEvenOdd_PathFill;
} else {
fill = clip.getPathFill(c);
GrPathRenderer* pr = this->getPathRenderer();
canDrawDirectToClip = pr->requiresStencilPass(this, clip.getPath(c), fill);
}
GrSetOp op = firstElement == c ? kReplace_SetOp : clip.getOp(c);
int passes;
GrStencilSettings stencilSettings[GrStencilSettings::kMaxStencilClipPasses];
canDrawDirectToClip = GrStencilSettings::GetClipPasses(op, canDrawDirectToClip,
clipBit, IsFillInverted(fill),
&passes, stencilSettings);
// draw the element to the client stencil bits if necessary
if (!canDrawDirectToClip) {
if (kRect_ClipType == clip.getElementType(c)) {
static const GrStencilSettings gDrawToStencil = {
kIncClamp_StencilOp, kIncClamp_StencilOp,
kIncClamp_StencilOp, kIncClamp_StencilOp,
kAlways_StencilFunc, kAlways_StencilFunc,
0xffffffff, 0xffffffff,
0x00000000, 0x00000000,
0xffffffff, 0xffffffff,
};
this->setStencil(gDrawToStencil);
SET_RANDOM_COLOR
this->drawSimpleRect(clip.getRect(c), NULL, 0);
} else {
SET_RANDOM_COLOR
getPathRenderer()->drawPathToStencil(this, clip.getPath(c),
NonInvertedFill(fill),
NULL);
}
}
// now we modify the clip bit by rendering either the clip
// element directly or a bounding rect of the entire clip.
this->enableState(kModifyStencilClip_StateBit);
for (int p = 0; p < passes; ++p) {
this->setStencil(stencilSettings[p]);
if (canDrawDirectToClip) {
if (kRect_ClipType == clip.getElementType(c)) {
SET_RANDOM_COLOR
this->drawSimpleRect(clip.getRect(c), NULL, 0);
} else {
SET_RANDOM_COLOR
getPathRenderer()->drawPath(this, 0,
clip.getPath(c),
fill, NULL);
}
} else {
SET_RANDOM_COLOR
this->drawSimpleRect(bounds, 0, NULL);
}
}
}
fClip = clip;
// recusive draws would have disabled this.
fClipState.fClipInStencil = true;
}
fClipState.fClipIsDirty = false;
}
// Must flush the scissor after graphics state
if (!this->flushGraphicsState(type)) {
return false;
}
this->flushScissor(r);
return true;
}
bool GrDefaultPathRenderer::internalDrawPath(const SkPath& path,
GrPathFill fill,
GrDrawTarget* target,
bool stencilOnly) {
GrMatrix viewM = target->getDrawState().getViewMatrix();
GrScalar tol = GR_Scalar1;
tol = GrPathUtils::scaleToleranceToSrc(tol, viewM, path.getBounds());
int vertexCnt;
int indexCnt;
GrPrimitiveType primType;
GrDrawTarget::AutoReleaseGeometry arg;
if (!this->createGeom(path,
fill,
tol,
target,
&primType,
&vertexCnt,
&indexCnt,
&arg)) {
return false;
}
GrAssert(NULL != target);
GrDrawTarget::AutoStateRestore asr(target, GrDrawTarget::kPreserve_ASRInit);
GrDrawState* drawState = target->drawState();
bool colorWritesWereDisabled = drawState->isColorWriteDisabled();
// face culling doesn't make sense here
GrAssert(GrDrawState::kBoth_DrawFace == drawState->getDrawFace());
int passCount = 0;
const GrStencilSettings* passes[3];
GrDrawState::DrawFace drawFace[3];
bool reverse = false;
bool lastPassIsBounds;
if (kHairLine_GrPathFill == fill) {
passCount = 1;
if (stencilOnly) {
passes[0] = &gDirectToStencil;
} else {
passes[0] = NULL;
}
lastPassIsBounds = false;
drawFace[0] = GrDrawState::kBoth_DrawFace;
} else {
if (single_pass_path(path, fill)) {
passCount = 1;
if (stencilOnly) {
passes[0] = &gDirectToStencil;
} else {
passes[0] = NULL;
}
drawFace[0] = GrDrawState::kBoth_DrawFace;
lastPassIsBounds = false;
} else {
switch (fill) {
case kInverseEvenOdd_GrPathFill:
reverse = true;
// fallthrough
case kEvenOdd_GrPathFill:
passes[0] = &gEOStencilPass;
if (stencilOnly) {
passCount = 1;
lastPassIsBounds = false;
} else {
passCount = 2;
lastPassIsBounds = true;
if (reverse) {
passes[1] = &gInvEOColorPass;
} else {
passes[1] = &gEOColorPass;
}
}
drawFace[0] = drawFace[1] = GrDrawState::kBoth_DrawFace;
break;
case kInverseWinding_GrPathFill:
reverse = true;
// fallthrough
case kWinding_GrPathFill:
if (fSeparateStencil) {
if (fStencilWrapOps) {
passes[0] = &gWindStencilSeparateWithWrap;
} else {
passes[0] = &gWindStencilSeparateNoWrap;
}
passCount = 2;
drawFace[0] = GrDrawState::kBoth_DrawFace;
} else {
if (fStencilWrapOps) {
passes[0] = &gWindSingleStencilWithWrapInc;
passes[1] = &gWindSingleStencilWithWrapDec;
} else {
passes[0] = &gWindSingleStencilNoWrapInc;
passes[1] = &gWindSingleStencilNoWrapDec;
}
// which is cw and which is ccw is arbitrary.
drawFace[0] = GrDrawState::kCW_DrawFace;
drawFace[1] = GrDrawState::kCCW_DrawFace;
passCount = 3;
}
if (stencilOnly) {
lastPassIsBounds = false;
--passCount;
} else {
lastPassIsBounds = true;
drawFace[passCount-1] = GrDrawState::kBoth_DrawFace;
if (reverse) {
passes[passCount-1] = &gInvWindColorPass;
} else {
passes[passCount-1] = &gWindColorPass;
}
}
break;
default:
GrAssert(!"Unknown path fFill!");
return false;
}
}
}
{
for (int p = 0; p < passCount; ++p) {
drawState->setDrawFace(drawFace[p]);
if (NULL != passes[p]) {
*drawState->stencil() = *passes[p];
}
if (lastPassIsBounds && (p == passCount-1)) {
if (!colorWritesWereDisabled) {
drawState->disableState(GrDrawState::kNoColorWrites_StateBit);
}
GrRect bounds;
GrDrawState::AutoDeviceCoordDraw adcd;
if (reverse) {
GrAssert(NULL != drawState->getRenderTarget());
// draw over the whole world.
bounds.setLTRB(0, 0,
GrIntToScalar(drawState->getRenderTarget()->width()),
GrIntToScalar(drawState->getRenderTarget()->height()));
GrMatrix vmi;
// mapRect through persp matrix may not be correct
if (!drawState->getViewMatrix().hasPerspective() &&
drawState->getViewInverse(&vmi)) {
vmi.mapRect(&bounds);
} else {
adcd.set(drawState);
}
} else {
bounds = path.getBounds();
}
GrDrawTarget::AutoGeometryPush agp(target);
target->drawSimpleRect(bounds, NULL);
} else {
if (passCount > 1) {
drawState->enableState(GrDrawState::kNoColorWrites_StateBit);
}
if (indexCnt) {
target->drawIndexed(primType, 0, 0,
vertexCnt, indexCnt);
} else {
target->drawNonIndexed(primType, 0, vertexCnt);
}
}
}
}
return true;
}
void GrInOrderDrawBuffer::drawRect(const GrRect& rect,
const SkMatrix* matrix,
const GrRect* srcRects[],
const SkMatrix* srcMatrices[]) {
GrAssert(!(NULL == fQuadIndexBuffer && fCurrQuad));
GrAssert(!(fDraws.empty() && fCurrQuad));
GrAssert(!(0 != fMaxQuads && NULL == fQuadIndexBuffer));
GrDrawState* drawState = this->drawState();
// if we have a quad IB then either append to the previous run of
// rects or start a new run
if (fMaxQuads) {
bool appendToPreviousDraw = false;
GrVertexLayout layout = GetRectVertexLayout(srcRects);
// Batching across colors means we move the draw color into the
// rect's vertex colors to allow greater batching (a lot of rects
// in a row differing only in color is a common occurence in tables).
bool batchAcrossColors = true;
if (!this->getCaps().dualSourceBlendingSupport()) {
for (int s = 0; s < GrDrawState::kNumStages; ++s) {
if (this->getDrawState().isStageEnabled(s)) {
// We disable batching across colors when there is a texture
// present because (by pushing the the color to the vertices)
// Ganesh loses track of the rect's opacity. This, in turn, can
// cause some of the blending optimizations to be disabled. This
// becomes a huge problem on some of the smaller devices where
// shader derivatives and dual source blending aren't supported.
// In those cases paths are often drawn to a texture and then
// drawn as a texture (using this method). Because dual source
// blending is disabled (and the blend optimizations are short
// circuited) some of the more esoteric blend modes can no longer
// be supported.
// TODO: add tracking of batchAcrossColors's opacity
batchAcrossColors = false;
break;
}
}
}
if (batchAcrossColors) {
layout |= GrDrawState::kColor_VertexLayoutBit;
}
AutoReleaseGeometry geo(this, layout, 4, 0);
if (!geo.succeeded()) {
GrPrintf("Failed to get space for vertices!\n");
return;
}
SkMatrix combinedMatrix = drawState->getViewMatrix();
// We go to device space so that matrix changes allow us to concat
// rect draws. When the caller has provided explicit source rects
// then we don't want to modify the stages' matrices. Otherwise
// we have to account for the view matrix change in the stage
// matrices.
uint32_t explicitCoordMask = 0;
if (srcRects) {
for (int s = 0; s < GrDrawState::kNumStages; ++s) {
if (srcRects[s]) {
explicitCoordMask |= (1 << s);
}
}
}
GrDrawState::AutoDeviceCoordDraw adcd(this->drawState(), explicitCoordMask);
if (!adcd.succeeded()) {
return;
}
if (NULL != matrix) {
combinedMatrix.preConcat(*matrix);
}
SetRectVertices(rect, &combinedMatrix, srcRects, srcMatrices,
this->getDrawState().getColor(), layout, geo.vertices());
// Now that the paint's color is stored in the vertices set it to
// white so that the following code can batch all the rects regardless
// of paint color
GrDrawState::AutoColorRestore acr(this->drawState(),
batchAcrossColors ? SK_ColorWHITE
: this->getDrawState().getColor());
// we don't want to miss an opportunity to batch rects together
// simply because the clip has changed if the clip doesn't affect
// the rect.
bool disabledClip = false;
if (drawState->isClipState()) {
GrRect devClipRect;
bool isIntersectionOfRects = false;
const GrClipData* clip = this->getClip();
clip->fClipStack->getConservativeBounds(-clip->fOrigin.fX,
-clip->fOrigin.fY,
drawState->getRenderTarget()->width(),
drawState->getRenderTarget()->height(),
&devClipRect,
&isIntersectionOfRects);
if (isIntersectionOfRects) {
// If the clip rect touches the edge of the viewport, extended it
// out (close) to infinity to avoid bogus intersections.
// We might consider a more exact clip to viewport if this
// conservative test fails.
const GrRenderTarget* target = drawState->getRenderTarget();
if (0 >= devClipRect.fLeft) {
devClipRect.fLeft = SK_ScalarMin;
}
if (target->width() <= devClipRect.fRight) {
devClipRect.fRight = SK_ScalarMax;
}
if (0 >= devClipRect.top()) {
devClipRect.fTop = SK_ScalarMin;
}
if (target->height() <= devClipRect.fBottom) {
devClipRect.fBottom = SK_ScalarMax;
}
int stride = GrDrawState::VertexSize(layout);
bool insideClip = true;
for (int v = 0; v < 4; ++v) {
const GrPoint& p = *GrDrawState::GetVertexPoint(geo.vertices(), v, stride);
if (!devClipRect.contains(p)) {
insideClip = false;
break;
}
}
if (insideClip) {
drawState->disableState(GrDrawState::kClip_StateBit);
disabledClip = true;
}
}
}
if (!this->needsNewClip() &&
!this->needsNewState() &&
fCurrQuad > 0 &&
fCurrQuad < fMaxQuads &&
layout == fLastRectVertexLayout) {
int vsize = GrDrawState::VertexSize(layout);
Draw& lastDraw = fDraws.back();
GrAssert(lastDraw.fIndexBuffer == fQuadIndexBuffer);
GrAssert(kTriangles_GrPrimitiveType == lastDraw.fPrimitiveType);
GrAssert(0 == lastDraw.fVertexCount % 4);
GrAssert(0 == lastDraw.fIndexCount % 6);
GrAssert(0 == lastDraw.fStartIndex);
GeometryPoolState& poolState = fGeoPoolStateStack.back();
appendToPreviousDraw =
kDraw_Cmd == fCmds.back() &&
lastDraw.fVertexBuffer == poolState.fPoolVertexBuffer &&
(fCurrQuad * 4 + lastDraw.fStartVertex) == poolState.fPoolStartVertex;
if (appendToPreviousDraw) {
lastDraw.fVertexCount += 4;
lastDraw.fIndexCount += 6;
fCurrQuad += 1;
// we reserved above, so we should be the first
// use of this vertex reservation.
GrAssert(0 == poolState.fUsedPoolVertexBytes);
poolState.fUsedPoolVertexBytes = 4 * vsize;
}
}
if (!appendToPreviousDraw) {
this->setIndexSourceToBuffer(fQuadIndexBuffer);
this->drawIndexed(kTriangles_GrPrimitiveType, 0, 0, 4, 6);
fCurrQuad = 1;
fLastRectVertexLayout = layout;
}
if (disabledClip) {
drawState->enableState(GrDrawState::kClip_StateBit);
}
fInstancedDrawTracker.reset();
} else {
INHERITED::drawRect(rect, matrix, srcRects, srcMatrices);
}
}
bool GrTesselatedPathRenderer::onDrawPath(const SkPath& path,
GrPathFill fill,
const GrVec* translate,
GrDrawTarget* target,
GrDrawState::StageMask stageMask,
bool antiAlias) {
GrDrawTarget::AutoStateRestore asr(target);
GrDrawState* drawState = target->drawState();
// face culling doesn't make sense here
GrAssert(GrDrawState::kBoth_DrawFace == drawState->getDrawFace());
GrMatrix viewM = drawState->getViewMatrix();
GrScalar tol = GR_Scalar1;
tol = GrPathUtils::scaleToleranceToSrc(tol, viewM, path.getBounds());
GrScalar tolSqd = GrMul(tol, tol);
int subpathCnt;
int maxPts = GrPathUtils::worstCasePointCount(path, &subpathCnt, tol);
GrVertexLayout layout = 0;
for (int s = 0; s < GrDrawState::kNumStages; ++s) {
if ((1 << s) & stageMask) {
layout |= GrDrawTarget::StagePosAsTexCoordVertexLayoutBit(s);
}
}
bool inverted = GrIsFillInverted(fill);
if (inverted) {
maxPts += 4;
subpathCnt++;
}
if (maxPts > USHRT_MAX) {
return false;
}
SkAutoSTMalloc<8, GrPoint> baseMem(maxPts);
GrPoint* base = baseMem;
GrPoint* vert = base;
GrPoint* subpathBase = base;
SkAutoSTMalloc<8, uint16_t> subpathVertCount(subpathCnt);
GrPoint pts[4];
SkPath::Iter iter(path, false);
bool first = true;
int subpath = 0;
for (;;) {
switch (iter.next(pts)) {
case kMove_PathCmd:
if (!first) {
subpathVertCount[subpath] = vert-subpathBase;
subpathBase = vert;
++subpath;
}
*vert = pts[0];
vert++;
break;
case kLine_PathCmd:
*vert = pts[1];
vert++;
break;
case kQuadratic_PathCmd: {
GrPathUtils::generateQuadraticPoints(pts[0], pts[1], pts[2],
tolSqd, &vert,
GrPathUtils::quadraticPointCount(pts, tol));
break;
}
case kCubic_PathCmd: {
GrPathUtils::generateCubicPoints(pts[0], pts[1], pts[2], pts[3],
tolSqd, &vert,
GrPathUtils::cubicPointCount(pts, tol));
break;
}
case kClose_PathCmd:
break;
case kEnd_PathCmd:
subpathVertCount[subpath] = vert-subpathBase;
++subpath; // this could be only in debug
goto FINISHED;
}
first = false;
}
FINISHED:
if (NULL != translate && 0 != translate->fX && 0 != translate->fY) {
for (int i = 0; i < vert - base; i++) {
base[i].offset(translate->fX, translate->fY);
}
}
if (inverted) {
GrRect bounds;
GrAssert(NULL != drawState->getRenderTarget());
bounds.setLTRB(0, 0,
GrIntToScalar(drawState->getRenderTarget()->width()),
GrIntToScalar(drawState->getRenderTarget()->height()));
GrMatrix vmi;
if (drawState->getViewInverse(&vmi)) {
vmi.mapRect(&bounds);
}
*vert++ = GrPoint::Make(bounds.fLeft, bounds.fTop);
*vert++ = GrPoint::Make(bounds.fLeft, bounds.fBottom);
*vert++ = GrPoint::Make(bounds.fRight, bounds.fBottom);
*vert++ = GrPoint::Make(bounds.fRight, bounds.fTop);
subpathVertCount[subpath++] = 4;
}
GrAssert(subpath == subpathCnt);
GrAssert((vert - base) <= maxPts);
size_t count = vert - base;
if (count < 3) {
return true;
}
if (subpathCnt == 1 && !inverted && path.isConvex()) {
if (antiAlias) {
GrEdgeArray edges;
GrMatrix inverse, matrix = drawState->getViewMatrix();
drawState->getViewInverse(&inverse);
count = computeEdgesAndIntersect(matrix, inverse, base, count, &edges, 0.0f);
size_t maxEdges = target->getMaxEdges();
if (count == 0) {
return true;
}
if (count <= maxEdges) {
// All edges fit; upload all edges and draw all verts as a fan
target->setVertexSourceToArray(layout, base, count);
drawState->setEdgeAAData(&edges[0], count);
target->drawNonIndexed(kTriangleFan_PrimitiveType, 0, count);
} else {
// Upload "maxEdges" edges and verts at a time, and draw as
// separate fans
for (size_t i = 0; i < count - 2; i += maxEdges - 2) {
edges[i] = edges[0];
base[i] = base[0];
int size = GR_CT_MIN(count - i, maxEdges);
target->setVertexSourceToArray(layout, &base[i], size);
drawState->setEdgeAAData(&edges[i], size);
target->drawNonIndexed(kTriangleFan_PrimitiveType, 0, size);
}
}
drawState->setEdgeAAData(NULL, 0);
} else {
target->setVertexSourceToArray(layout, base, count);
target->drawNonIndexed(kTriangleFan_PrimitiveType, 0, count);
}
return true;
}
if (antiAlias) {
// Run the tesselator once to get the boundaries.
GrBoundaryTess btess(count, fill_type_to_glu_winding_rule(fill));
btess.addVertices(base, subpathVertCount, subpathCnt);
GrMatrix inverse, matrix = drawState->getViewMatrix();
if (!drawState->getViewInverse(&inverse)) {
return false;
}
if (btess.vertices().count() > USHRT_MAX) {
return false;
}
// Inflate the boundary, and run the tesselator again to generate
// interior polys.
const GrPointArray& contourPoints = btess.contourPoints();
const GrIndexArray& contours = btess.contours();
GrEdgePolygonTess ptess(contourPoints.count(), GLU_TESS_WINDING_NONZERO, matrix);
size_t i = 0;
Sk_gluTessBeginPolygon(ptess.tess(), &ptess);
for (int contour = 0; contour < contours.count(); ++contour) {
int count = contours[contour];
GrEdgeArray edges;
int newCount = computeEdgesAndIntersect(matrix, inverse, &btess.contourPoints()[i], count, &edges, 1.0f);
Sk_gluTessBeginContour(ptess.tess());
for (int j = 0; j < newCount; j++) {
ptess.addVertex(contourPoints[i + j], ptess.vertices().count());
}
i += count;
Sk_gluTessEndContour(ptess.tess());
}
Sk_gluTessEndPolygon(ptess.tess());
if (ptess.vertices().count() > USHRT_MAX) {
return false;
}
// Draw the resulting polys and upload their edge data.
drawState->enableState(GrDrawState::kEdgeAAConcave_StateBit);
const GrPointArray& vertices = ptess.vertices();
const GrIndexArray& indices = ptess.indices();
const GrDrawState::Edge* edges = ptess.edges();
GR_DEBUGASSERT(indices.count() % 3 == 0);
for (int i = 0; i < indices.count(); i += 3) {
GrPoint tri_verts[3];
int index0 = indices[i];
int index1 = indices[i + 1];
int index2 = indices[i + 2];
tri_verts[0] = vertices[index0];
tri_verts[1] = vertices[index1];
tri_verts[2] = vertices[index2];
GrDrawState::Edge tri_edges[6];
int t = 0;
const GrDrawState::Edge& edge0 = edges[index0 * 2];
const GrDrawState::Edge& edge1 = edges[index0 * 2 + 1];
const GrDrawState::Edge& edge2 = edges[index1 * 2];
const GrDrawState::Edge& edge3 = edges[index1 * 2 + 1];
const GrDrawState::Edge& edge4 = edges[index2 * 2];
const GrDrawState::Edge& edge5 = edges[index2 * 2 + 1];
if (validEdge(edge0) && validEdge(edge1)) {
tri_edges[t++] = edge0;
tri_edges[t++] = edge1;
}
if (validEdge(edge2) && validEdge(edge3)) {
tri_edges[t++] = edge2;
tri_edges[t++] = edge3;
}
if (validEdge(edge4) && validEdge(edge5)) {
tri_edges[t++] = edge4;
tri_edges[t++] = edge5;
}
drawState->setEdgeAAData(&tri_edges[0], t);
target->setVertexSourceToArray(layout, &tri_verts[0], 3);
target->drawNonIndexed(kTriangles_PrimitiveType, 0, 3);
}
drawState->setEdgeAAData(NULL, 0);
drawState->disableState(GrDrawState::kEdgeAAConcave_StateBit);
return true;
}
GrPolygonTess ptess(count, fill_type_to_glu_winding_rule(fill));
ptess.addVertices(base, subpathVertCount, subpathCnt);
const GrPointArray& vertices = ptess.vertices();
const GrIndexArray& indices = ptess.indices();
if (indices.count() > 0) {
target->setVertexSourceToArray(layout, vertices.begin(), vertices.count());
target->setIndexSourceToArray(indices.begin(), indices.count());
target->drawIndexed(kTriangles_PrimitiveType,
0,
0,
vertices.count(),
indices.count());
}
return true;
}
////////////////////////////////////////////////////////////////////////////////
// Create a 8-bit clip mask in alpha
bool GrClipMaskManager::createAlphaClipMask(const GrClipData& clipDataIn,
GrTexture** result,
GrIRect *devResultBounds) {
GrAssert(NULL != devResultBounds);
GrAssert(kNone_ClipMaskType == fCurrClipMaskType);
if (this->clipMaskPreamble(clipDataIn, result, devResultBounds)) {
fCurrClipMaskType = kAlpha_ClipMaskType;
return true;
}
// Note: 'resultBounds' is in device (as opposed to canvas) coordinates
GrTexture* accum = fAACache.getLastMask();
if (NULL == accum) {
fAACache.reset();
return false;
}
GrDrawTarget::AutoStateRestore asr(fGpu, GrDrawTarget::kReset_ASRInit);
GrDrawState* drawState = fGpu->drawState();
GrDrawTarget::AutoGeometryPush agp(fGpu);
// The mask we generate is translated so that its upper-left corner is at devResultBounds
// upper-left corner in device space.
GrIRect maskResultBounds = GrIRect::MakeWH(devResultBounds->width(), devResultBounds->height());
// Set the matrix so that rendered clip elements are transformed from the space of the clip
// stack to the alpha-mask. This accounts for both translation due to the clip-origin and the
// placement of the mask within the device.
SkVector clipToMaskOffset = {
SkIntToScalar(-devResultBounds->fLeft - clipDataIn.fOrigin.fX),
SkIntToScalar(-devResultBounds->fTop - clipDataIn.fOrigin.fY)
};
drawState->viewMatrix()->setTranslate(clipToMaskOffset);
bool clearToInside;
SkRegion::Op firstOp = SkRegion::kReplace_Op; // suppress warning
SkClipStack::Iter iter(*clipDataIn.fClipStack,
SkClipStack::Iter::kBottom_IterStart);
const SkClipStack::Iter::Clip* clip = process_initial_clip_elements(&iter,
*devResultBounds,
&clearToInside,
&firstOp,
clipDataIn);
// The scratch texture that we are drawing into can be substantially larger than the mask. Only
// clear the part that we care about.
fGpu->clear(&maskResultBounds,
clearToInside ? 0xffffffff : 0x00000000,
accum->asRenderTarget());
bool accumClearedToZero = !clearToInside;
GrAutoScratchTexture temp;
bool first = true;
// walk through each clip element and perform its set op
for ( ; NULL != clip; clip = iter.nextCombined()) {
SkRegion::Op op = clip->fOp;
if (first) {
first = false;
op = firstOp;
}
if (SkRegion::kReplace_Op == op) {
// clear the accumulator and draw the new object directly into it
if (!accumClearedToZero) {
fGpu->clear(&maskResultBounds, 0x00000000, accum->asRenderTarget());
}
setup_boolean_blendcoeffs(drawState, op);
this->drawClipShape(accum, clip, *devResultBounds);
} else if (SkRegion::kReverseDifference_Op == op ||
SkRegion::kIntersect_Op == op) {
// there is no point in intersecting a screen filling rectangle.
if (SkRegion::kIntersect_Op == op && NULL != clip->fRect &&
contains(*clip->fRect, *devResultBounds, clipDataIn.fOrigin)) {
continue;
}
getTemp(*devResultBounds, &temp);
if (NULL == temp.texture()) {
fAACache.reset();
return false;
}
// this is the bounds of the clip element in the space of the alpha-mask. The temporary
// mask buffer can be substantially larger than the actually clip stack element. We
// touch the minimum number of pixels necessary and use decal mode to combine it with
// the accumulator
GrRect elementMaskBounds = clip->getBounds();
elementMaskBounds.offset(clipToMaskOffset);
GrIRect elementMaskIBounds;
elementMaskBounds.roundOut(&elementMaskIBounds);
// clear the temp target & draw into it
fGpu->clear(&elementMaskIBounds, 0x00000000, temp.texture()->asRenderTarget());
setup_boolean_blendcoeffs(drawState, SkRegion::kReplace_Op);
this->drawClipShape(temp.texture(), clip, elementMaskIBounds);
// Now draw into the accumulator using the real operation
// and the temp buffer as a texture
this->mergeMask(accum, temp.texture(), op, maskResultBounds, elementMaskIBounds);
} else {
// all the remaining ops can just be directly draw into
// the accumulation buffer
setup_boolean_blendcoeffs(drawState, op);
this->drawClipShape(accum, clip, *devResultBounds);
}
accumClearedToZero = false;
}
*result = accum;
fCurrClipMaskType = kAlpha_ClipMaskType;
return true;
}
void GrAARectRenderer::strokeAARect(GrGpu* gpu,
GrDrawTarget* target,
const GrRect& devRect,
const GrVec& devStrokeSize,
bool useVertexCoverage) {
const SkScalar& dx = devStrokeSize.fX;
const SkScalar& dy = devStrokeSize.fY;
const SkScalar rx = SkScalarMul(dx, SK_ScalarHalf);
const SkScalar ry = SkScalarMul(dy, SK_ScalarHalf);
SkScalar spare;
{
SkScalar w = devRect.width() - dx;
SkScalar h = devRect.height() - dy;
spare = GrMin(w, h);
}
if (spare <= 0) {
GrRect r(devRect);
r.inset(-rx, -ry);
this->fillAARect(gpu, target, r, useVertexCoverage);
return;
}
GrVertexLayout layout = aa_rect_layout(useVertexCoverage);
size_t vsize = GrDrawTarget::VertexSize(layout);
GrDrawTarget::AutoReleaseGeometry geo(target, layout, 16, 0);
if (!geo.succeeded()) {
GrPrintf("Failed to get space for vertices!\n");
return;
}
GrIndexBuffer* indexBuffer = this->aaStrokeRectIndexBuffer(gpu);
if (NULL == indexBuffer) {
GrPrintf("Failed to create index buffer!\n");
return;
}
intptr_t verts = reinterpret_cast<intptr_t>(geo.vertices());
// We create vertices for four nested rectangles. There are two ramps from 0 to full
// coverage, one on the exterior of the stroke and the other on the interior.
// The following pointers refer to the four rects, from outermost to innermost.
GrPoint* fan0Pos = reinterpret_cast<GrPoint*>(verts);
GrPoint* fan1Pos = reinterpret_cast<GrPoint*>(verts + 4 * vsize);
GrPoint* fan2Pos = reinterpret_cast<GrPoint*>(verts + 8 * vsize);
GrPoint* fan3Pos = reinterpret_cast<GrPoint*>(verts + 12 * vsize);
set_inset_fan(fan0Pos, vsize, devRect,
-rx - SK_ScalarHalf, -ry - SK_ScalarHalf);
set_inset_fan(fan1Pos, vsize, devRect,
-rx + SK_ScalarHalf, -ry + SK_ScalarHalf);
set_inset_fan(fan2Pos, vsize, devRect,
rx - SK_ScalarHalf, ry - SK_ScalarHalf);
set_inset_fan(fan3Pos, vsize, devRect,
rx + SK_ScalarHalf, ry + SK_ScalarHalf);
// The outermost rect has 0 coverage
verts += sizeof(GrPoint);
for (int i = 0; i < 4; ++i) {
*reinterpret_cast<GrColor*>(verts + i * vsize) = 0;
}
// The inner two rects have full coverage
GrColor innerColor;
if (useVertexCoverage) {
innerColor = 0xffffffff;
} else {
innerColor = target->getDrawState().getColor();
}
verts += 4 * vsize;
for (int i = 0; i < 8; ++i) {
*reinterpret_cast<GrColor*>(verts + i * vsize) = innerColor;
}
// The innermost rect has full coverage
verts += 8 * vsize;
for (int i = 0; i < 4; ++i) {
*reinterpret_cast<GrColor*>(verts + i * vsize) = 0;
}
target->setIndexSourceToBuffer(indexBuffer);
target->drawIndexed(kTriangles_GrPrimitiveType,
0, 0, 16, aaStrokeRectIndexCount());
}
////////////////////////////////////////////////////////////////////////////////
// Create a 8-bit clip mask in alpha
GrTexture* GrClipMaskManager::createAlphaClipMask(int32_t clipStackGenID,
InitialState initialState,
const ElementList& elements,
const SkIRect& clipSpaceIBounds) {
GrAssert(kNone_ClipMaskType == fCurrClipMaskType);
GrTexture* result;
if (this->getMaskTexture(clipStackGenID, clipSpaceIBounds, &result)) {
fCurrClipMaskType = kAlpha_ClipMaskType;
return result;
}
if (NULL == result) {
fAACache.reset();
return NULL;
}
GrDrawTarget::AutoGeometryAndStatePush agasp(fGpu, GrDrawTarget::kReset_ASRInit);
GrDrawState* drawState = fGpu->drawState();
// The top-left of the mask corresponds to the top-left corner of the bounds.
SkVector clipToMaskOffset = {
SkIntToScalar(-clipSpaceIBounds.fLeft),
SkIntToScalar(-clipSpaceIBounds.fTop)
};
// The texture may be larger than necessary, this rect represents the part of the texture
// we populate with a rasterization of the clip.
SkIRect maskSpaceIBounds = SkIRect::MakeWH(clipSpaceIBounds.width(), clipSpaceIBounds.height());
// We're drawing a coverage mask and want coverage to be run through the blend function.
drawState->enableState(GrDrawState::kCoverageDrawing_StateBit);
// Set the matrix so that rendered clip elements are transformed to mask space from clip space.
drawState->viewMatrix()->setTranslate(clipToMaskOffset);
// The scratch texture that we are drawing into can be substantially larger than the mask. Only
// clear the part that we care about.
fGpu->clear(&maskSpaceIBounds,
kAllIn_InitialState == initialState ? 0xffffffff : 0x00000000,
result->asRenderTarget());
// When we use the stencil in the below loop it is important to have this clip installed.
// The second pass that zeros the stencil buffer renders the rect maskSpaceIBounds so the first
// pass must not set values outside of this bounds or stencil values outside the rect won't be
// cleared.
GrDrawTarget::AutoClipRestore acr(fGpu, maskSpaceIBounds);
drawState->enableState(GrDrawState::kClip_StateBit);
GrAutoScratchTexture temp;
// walk through each clip element and perform its set op
for (ElementList::Iter iter = elements.headIter(); iter.get(); iter.next()) {
const Element* element = iter.get();
SkRegion::Op op = element->getOp();
bool invert = element->isInverseFilled();
if (invert || SkRegion::kIntersect_Op == op || SkRegion::kReverseDifference_Op == op) {
GrPathRenderer* pr = NULL;
bool useTemp = !this->canStencilAndDrawElement(result, element, &pr);
GrTexture* dst;
// This is the bounds of the clip element in the space of the alpha-mask. The temporary
// mask buffer can be substantially larger than the actually clip stack element. We
// touch the minimum number of pixels necessary and use decal mode to combine it with
// the accumulator.
GrIRect maskSpaceElementIBounds;
if (useTemp) {
if (invert) {
maskSpaceElementIBounds = maskSpaceIBounds;
} else {
GrRect elementBounds = element->getBounds();
elementBounds.offset(clipToMaskOffset);
elementBounds.roundOut(&maskSpaceElementIBounds);
}
this->getTemp(maskSpaceIBounds.fRight, maskSpaceIBounds.fBottom, &temp);
if (NULL == temp.texture()) {
fAACache.reset();
return NULL;
}
dst = temp.texture();
// clear the temp target and set blend to replace
fGpu->clear(&maskSpaceElementIBounds,
invert ? 0xffffffff : 0x00000000,
dst->asRenderTarget());
setup_boolean_blendcoeffs(drawState, SkRegion::kReplace_Op);
} else {
// draw directly into the result with the stencil set to make the pixels affected
// by the clip shape be non-zero.
dst = result;
GR_STATIC_CONST_SAME_STENCIL(kStencilInElement,
kReplace_StencilOp,
kReplace_StencilOp,
kAlways_StencilFunc,
0xffff,
0xffff,
0xffff);
drawState->setStencil(kStencilInElement);
setup_boolean_blendcoeffs(drawState, op);
}
drawState->setAlpha(invert ? 0x00 : 0xff);
if (!this->drawElement(dst, element, pr)) {
fAACache.reset();
return NULL;
}
if (useTemp) {
// Now draw into the accumulator using the real operation and the temp buffer as a
// texture
this->mergeMask(result,
temp.texture(),
op,
maskSpaceIBounds,
maskSpaceElementIBounds);
} else {
// Draw to the exterior pixels (those with a zero stencil value).
drawState->setAlpha(invert ? 0xff : 0x00);
GR_STATIC_CONST_SAME_STENCIL(kDrawOutsideElement,
kZero_StencilOp,
kZero_StencilOp,
kEqual_StencilFunc,
0xffff,
0x0000,
0xffff);
drawState->setStencil(kDrawOutsideElement);
fGpu->drawSimpleRect(clipSpaceIBounds);
drawState->disableStencil();
}
} else {
// all the remaining ops can just be directly draw into the accumulation buffer
drawState->setAlpha(0xff);
setup_boolean_blendcoeffs(drawState, op);
this->drawElement(result, element);
}
}
fCurrClipMaskType = kAlpha_ClipMaskType;
return result;
}
bool GrStencilAndCoverPathRenderer::onDrawPath(const SkPath& path,
GrPathFill fill,
GrDrawTarget* target,
bool antiAlias) {
GrAssert(!antiAlias);
GrAssert(kHairLine_GrPathFill != fill);
GrDrawState* drawState = target->drawState();
GrAssert(drawState->getStencil().isDisabled());
SkAutoTUnref<GrPath> p(fGpu->createPath(path));
GrPathFill nonInvertedFill = GrNonInvertedFill(fill);
target->stencilPath(p, nonInvertedFill);
// TODO: Use built in cover operation rather than a rect draw. This will require making our
// fragment shaders be able to eat varyings generated by a matrix.
// fill the path, zero out the stencil
GrRect bounds = p->getBounds();
GrScalar bloat = drawState->getViewMatrix().getMaxStretch() * GR_ScalarHalf;
GrDrawState::AutoDeviceCoordDraw adcd;
if (nonInvertedFill == fill) {
GR_STATIC_CONST_SAME_STENCIL(kStencilPass,
kZero_StencilOp,
kZero_StencilOp,
kNotEqual_StencilFunc,
0xffff,
0x0000,
0xffff);
*drawState->stencil() = kStencilPass;
} else {
GR_STATIC_CONST_SAME_STENCIL(kInvertedStencilPass,
kZero_StencilOp,
kZero_StencilOp,
// We know our rect will hit pixels outside the clip and the user bits will be 0
// outside the clip. So we can't just fill where the user bits are 0. We also need to
// check that the clip bit is set.
kEqualIfInClip_StencilFunc,
0xffff,
0x0000,
0xffff);
GrMatrix vmi;
bounds.setLTRB(0, 0,
GrIntToScalar(drawState->getRenderTarget()->width()),
GrIntToScalar(drawState->getRenderTarget()->height()));
// mapRect through persp matrix may not be correct
if (!drawState->getViewMatrix().hasPerspective() && drawState->getViewInverse(&vmi)) {
vmi.mapRect(&bounds);
// theoretically could set bloat = 0, instead leave it because of matrix inversion
// precision.
} else {
adcd.set(drawState);
bloat = 0;
}
*drawState->stencil() = kInvertedStencilPass;
}
bounds.outset(bloat, bloat);
target->drawSimpleRect(bounds, NULL);
target->drawState()->stencil()->setDisabled();
return true;
}
void GrDefaultPathRenderer::onDrawPath(GrDrawTarget::StageBitfield stages,
bool stencilOnly) {
GrMatrix viewM = fTarget->getViewMatrix();
GrScalar tol = GR_Scalar1;
tol = GrPathUtils::scaleToleranceToSrc(tol, viewM, fPath->getBounds());
// FIXME: It's really dumb that we recreate the verts for a new vertex
// layout. We only do that because the GrDrawTarget API doesn't allow
// us to change the vertex layout after reserveVertexSpace(). We won't
// actually change the vertex data when the layout changes since all the
// stages reference the positions (rather than having separate tex coords)
// and we don't ever have per-vert colors. In practice our call sites
// won't change the stages in use inside a setPath / removePath pair. But
// it is a silly limitation of the GrDrawTarget design that should be fixed.
if (tol != fPreviousSrcTol ||
stages != fPreviousStages) {
if (!this->createGeom(tol, stages)) {
return;
}
}
GrAssert(NULL != fTarget);
GrDrawTarget::AutoStateRestore asr(fTarget);
bool colorWritesWereDisabled = fTarget->isColorWriteDisabled();
// face culling doesn't make sense here
GrAssert(GrDrawTarget::kBoth_DrawFace == fTarget->getDrawFace());
int passCount = 0;
const GrStencilSettings* passes[3];
GrDrawTarget::DrawFace drawFace[3];
bool reverse = false;
bool lastPassIsBounds;
if (kHairLine_PathFill == fFill) {
passCount = 1;
if (stencilOnly) {
passes[0] = &gDirectToStencil;
} else {
passes[0] = NULL;
}
lastPassIsBounds = false;
drawFace[0] = GrDrawTarget::kBoth_DrawFace;
} else {
if (single_pass_path(*fTarget, *fPath, fFill)) {
passCount = 1;
if (stencilOnly) {
passes[0] = &gDirectToStencil;
} else {
passes[0] = NULL;
}
drawFace[0] = GrDrawTarget::kBoth_DrawFace;
lastPassIsBounds = false;
} else {
switch (fFill) {
case kInverseEvenOdd_PathFill:
reverse = true;
// fallthrough
case kEvenOdd_PathFill:
passes[0] = &gEOStencilPass;
if (stencilOnly) {
passCount = 1;
lastPassIsBounds = false;
} else {
passCount = 2;
lastPassIsBounds = true;
if (reverse) {
passes[1] = &gInvEOColorPass;
} else {
passes[1] = &gEOColorPass;
}
}
drawFace[0] = drawFace[1] = GrDrawTarget::kBoth_DrawFace;
break;
case kInverseWinding_PathFill:
reverse = true;
// fallthrough
case kWinding_PathFill:
if (fSeparateStencil) {
if (fStencilWrapOps) {
passes[0] = &gWindStencilSeparateWithWrap;
} else {
passes[0] = &gWindStencilSeparateNoWrap;
}
passCount = 2;
drawFace[0] = GrDrawTarget::kBoth_DrawFace;
} else {
if (fStencilWrapOps) {
passes[0] = &gWindSingleStencilWithWrapInc;
passes[1] = &gWindSingleStencilWithWrapDec;
} else {
passes[0] = &gWindSingleStencilNoWrapInc;
passes[1] = &gWindSingleStencilNoWrapDec;
}
// which is cw and which is ccw is arbitrary.
drawFace[0] = GrDrawTarget::kCW_DrawFace;
drawFace[1] = GrDrawTarget::kCCW_DrawFace;
passCount = 3;
}
if (stencilOnly) {
lastPassIsBounds = false;
--passCount;
} else {
lastPassIsBounds = true;
drawFace[passCount-1] = GrDrawTarget::kBoth_DrawFace;
if (reverse) {
passes[passCount-1] = &gInvWindColorPass;
} else {
passes[passCount-1] = &gWindColorPass;
}
}
break;
default:
GrAssert(!"Unknown path fFill!");
return;
}
}
}
{
for (int p = 0; p < passCount; ++p) {
fTarget->setDrawFace(drawFace[p]);
if (NULL != passes[p]) {
fTarget->setStencil(*passes[p]);
}
if (lastPassIsBounds && (p == passCount-1)) {
if (!colorWritesWereDisabled) {
fTarget->disableState(GrDrawTarget::kNoColorWrites_StateBit);
}
GrRect bounds;
if (reverse) {
GrAssert(NULL != fTarget->getRenderTarget());
// draw over the whole world.
bounds.setLTRB(0, 0,
GrIntToScalar(fTarget->getRenderTarget()->width()),
GrIntToScalar(fTarget->getRenderTarget()->height()));
GrMatrix vmi;
// mapRect through persp matrix may not be correct
if (!fTarget->getViewMatrix().hasPerspective() &&
fTarget->getViewInverse(&vmi)) {
vmi.mapRect(&bounds);
} else {
if (stages) {
if (!fTarget->getViewInverse(&vmi)) {
GrPrintf("Could not invert matrix.");
return;
}
fTarget->preConcatSamplerMatrices(stages, vmi);
}
fTarget->setViewMatrix(GrMatrix::I());
}
} else {
bounds = fPath->getBounds();
bounds.offset(fTranslate);
}
GrDrawTarget::AutoGeometryPush agp(fTarget);
fTarget->drawSimpleRect(bounds, NULL, stages);
} else {
if (passCount > 1) {
fTarget->enableState(GrDrawTarget::kNoColorWrites_StateBit);
}
if (fUseIndexedDraw) {
fTarget->drawIndexed(fPrimitiveType, 0, 0,
fVertexCnt, fIndexCnt);
} else {
int baseVertex = 0;
for (int sp = 0; sp < fSubpathCount; ++sp) {
fTarget->drawNonIndexed(fPrimitiveType, baseVertex,
fSubpathVertCount[sp]);
baseVertex += fSubpathVertCount[sp];
}
}
}
}
}
}
////////////////////////////////////////////////////////////////////////////////
// sort out what kind of clip mask needs to be created: alpha, stencil,
// scissor, or entirely software
bool GrClipMaskManager::createClipMask(GrGpu* gpu,
const GrClip& clipIn,
ScissoringSettings* scissorSettings) {
GrAssert(scissorSettings);
scissorSettings->fEnableScissoring = false;
fClipMaskInStencil = false;
fClipMaskInAlpha = false;
GrDrawState* drawState = gpu->drawState();
if (!drawState->isClipState()) {
return true;
}
GrRenderTarget* rt = drawState->getRenderTarget();
// GrDrawTarget should have filtered this for us
GrAssert(NULL != rt);
#if GR_SW_CLIP
// If MSAA is enabled we can do everything in the stencil buffer.
// Otherwise check if we should just create the entire clip mask
// in software (this will only happen if the clip mask is anti-aliased
// and too complex for the gpu to handle in its entirety)
if (0 == rt->numSamples() && useSWOnlyPath(gpu, clipIn)) {
// The clip geometry is complex enough that it will be more
// efficient to create it entirely in software
GrTexture* result = NULL;
GrIRect bound;
if (this->createSoftwareClipMask(gpu, clipIn, &result, &bound)) {
fClipMaskInAlpha = true;
setup_drawstate_aaclip(gpu, result, bound);
return true;
}
// if SW clip mask creation fails fall through to the other
// two possible methods (bottoming out at stencil clipping)
}
#endif // GR_SW_CLIP
#if GR_AA_CLIP
// If MSAA is enabled use the (faster) stencil path for AA clipping
// otherwise the alpha clip mask is our only option
if (0 == rt->numSamples() && clipIn.requiresAA()) {
// Since we are going to create a destination texture of the correct
// size for the mask (rather than being bound by the size of the
// render target) we aren't going to use scissoring like the stencil
// path does (see scissorSettings below)
GrTexture* result = NULL;
GrIRect bound;
if (this->createAlphaClipMask(gpu, clipIn, &result, &bound)) {
fClipMaskInAlpha = true;
setup_drawstate_aaclip(gpu, result, bound);
return true;
}
// if alpha clip mask creation fails fall through to the stencil
// buffer method
}
#endif // GR_AA_CLIP
// Either a hard (stencil buffer) clip was explicitly requested or
// an antialiased clip couldn't be created. In either case, free up
// the texture in the antialiased mask cache.
// TODO: this may require more investigation. Ganesh performs a lot of
// utility draws (e.g., clears, InOrderDrawBuffer playbacks) that hit
// the stencil buffer path. These may be "incorrectly" clearing the
// AA cache.
fAACache.reset();
GrRect bounds;
GrRect rtRect;
rtRect.setLTRB(0, 0,
GrIntToScalar(rt->width()), GrIntToScalar(rt->height()));
if (clipIn.hasConservativeBounds()) {
bounds = clipIn.getConservativeBounds();
if (!bounds.intersect(rtRect)) {
bounds.setEmpty();
}
} else {
bounds = rtRect;
}
bounds.roundOut(&scissorSettings->fScissorRect);
if (scissorSettings->fScissorRect.isEmpty()) {
scissorSettings->fScissorRect.setLTRB(0,0,0,0);
// TODO: I think we can do an early exit here - after refactoring try:
// set fEnableScissoring to true but leave fClipMaskInStencil false
// and return - everything is going to be scissored away anyway!
}
scissorSettings->fEnableScissoring = true;
// use the stencil clip if we can't represent the clip as a rectangle.
fClipMaskInStencil = !clipIn.isRect() && !clipIn.isEmpty() &&
!bounds.isEmpty();
if (fClipMaskInStencil) {
return this->createStencilClipMask(gpu, clipIn, bounds, scissorSettings);
}
return true;
}
